GaAs INTEGRATED CIRCUIT PG2159T6R L, S-BAND SPDT SWITCH DESCRIPTION The PG2159T6R is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed for mobile phone and another L, S-band applications. This device can operate 2 control switching by control voltage 1.8 to 3.3 V. This device can operate frequency from 0.05 GHz to 3.0 GHz, having the low insertion loss and high isolation. This device is housed in a 6-pin plastic TSSON (Thin Shrink Small Out-line Non-leaded) (T6R) package. And this package is able to high-density surface mounting. FEATURES * Switch control voltage * * * * : : Low insertion loss : : : : : High isolation : : : : : Handling power : : High-density surface mounting : Vcont (H) = 1.8 to 3.3 V (2.7 V TYP.) Vcont (L) = 0.2 to 0.2 V (0 V TYP.) Lins1 = 0.20 dB TYP. @ f = 0.05 to 0.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V Lins2 = 0.21 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V Lins3 = 0.23 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V Lins4 = 0.25 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V Lins5 = 0.27 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V ISL1 = 27 dB TYP. @ f = 0.05 to 0.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V ISL2 = 27 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V ISL3 = 27 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V ISL4 = 27 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V ISL5 = 27 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V Pin (1 dB) = +25.5 dBm TYP. @ f = 0.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V Pin (0.1 dB) = +22.0 dBm TYP. @ f = 0.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V 6-pin plastic TSSON (T6R) package (1.0 1.0 0.37 mm) APPLICATIONS * L, S-band digital cellular or cordless telephone TM * W-LAN and Bluetooth ORDERING INFORMATION Part Number Order Number PG2159T6R-E2 PG2159T6R-E2-A Package 6-pin plastic TSSON (T6R) (Pb-Free) Marking G7 Supplying Form Embossed tape 8 mm wide Pin 1, 6 face the perforation side of the tape Qty 5 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: PG2159T6R-A Caution: Observe precautions when handling because these devices are sensitive to electrostatic discharge Document No. PG10710EJ01V0DS (1st edition) Date Published June 2008 NS PG2159T6R PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM Pin No. Pin Name 1 OUTPUT1 2 GND 3 OUTPUT2 4 Vcont2 5 INPUT 6 Vcont1 Remark Exposed pad : GND TRUTH TABLE Vcont1 Vcont2 INPUTOUTPUT1 INPUTOUTPUT2 Low High OFF ON High Low ON OFF ABSOLUTE MAXIMUM RATINGS (T A = +25C, unless otherwise specified) Parameter Switch Control Voltage Input Power Symbol Vcont Pin Ratings 6.0 +26.0 Unit Note1 V Note2, 4 +8 + Vcont 20/3 Note3, 4 dBm Input Power Pin Operating Ambient Temperature TA 45 to +85 C Storage Temperature Tstg 55 to +150 C Notes 1. 2. 3. 4. Vcont1 Vcont2 6.0 V 2.7 V Vcont1 Vcont2 3.3 V 1.8 V Vcont1 Vcont2 2.7 V Please refer to following chart. Remark The graph indicates nominal characteristics. 2 Data Sheet PG10710EJ01V0DS dBm PG2159T6R RECOMMENDED OPERATING RANGE (T A = +25C, unless otherwise specified) Parameter Symbol MIN. TYP. MAX. Unit Switch Control Voltage (H) Vcont (H) 1.8 2.7 3.3 V Switch Control Voltage (L) Vcont (L) 0.2 0 +0.2 V ELECTRICAL CHARACTERISTICS 1 (T A = +25C, Vcont (H) = 2.7 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF, unless otherwise specified) Parameter Symbol Test Conditions Note1 MIN. TYP. MAX. Unit 0.20 0.35 dB Insertion Loss 1 Lins1 f = 0.05 to 0.5 GHz Insertion Loss 2 Lins2 f = 0.5 to 1.0 GHz 0.21 0.35 dB Insertion Loss 3 Lins3 f = 1.0 to 2.0 GHz 0.23 0.40 dB Insertion Loss 4 Lins4 f = 2.0 to 2.5 GHz 0.25 0.42 dB Insertion Loss 5 Lins5 f = 2.5 to 3.0 GHz 0.27 0.45 dB 24 27 dB Note1 Isolation 1 ISL1 f = 0.05 to 0.5 GHz Isolation 2 ISL2 f = 0.5 to 1.0 GHz 24 27 dB Isolation 3 ISL3 f = 1.0 to 2.0 GHz 24 27 dB Isolation 4 ISL4 f = 2.0 to 2.5 GHz 24 27 dB Isolation 5 ISL5 f = 2.5 to 3.0 GHz 24 27 dB 15 20 dB 15 20 dB 15 20 dB 15 20 dB +20.0 +22.0 dBm f = 0.5 to 3.0 GHz +22.0 dBm f = 0.5 to 3.0 GHz +25.5 dBm Input Return Loss 1 RLin1 f = 0.05 to 0.5 GHz Input Return Loss 2 RLin2 f = 0.5 to 3.0 GHz Output Return Loss 1 RLout1 f = 0.05 to 0.5 GHz Output Return Loss 2 RLout2 f = 0.5 to 3.0 GHz 0.1 dB Loss Compression Note2 Input Power Pin (0.1 dB) 1 dB Loss Compression Note3 Input Power Pin (1 dB) Note1 Note1 f = 2.0 GHz/2.5 GHz 2nd Harmonics 2f0 f = 2.0 GHz/2.5 GHz, Pin = +10 dBm 65 77 dBc 3rd Harmonics 3f0 f = 2.0 GHz/2.5 GHz, Pin = +10 dBm 60 80 dBc Input 3rd Order Intercept Point IIP3 f = 0.5 to 3.0 GHz, 2 tone +49.0 dBm 0.2 1.0 A 20 200 ns 5 MHz spacing Switch Control Current Icont Switch Control Speed tSW 50% CTL to 90/10% Notes 1. DC cut capacitors = 1 000 pF at f = 0.05 to 0.5 GHz 2. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear range. 3. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear range. Caution This device is used it is necessary to use DC cut capacitors. Data Sheet PG10710EJ01V0DS 3 PG2159T6R ELECTRICAL CHARACTERISTICS 2 (T A = +25C, Vcont (H) = 1.8 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF, unless otherwise specified) Parameter Symbol Test Conditions Note1 MIN. TYP. MAX. Unit 0.21 0.36 dB Insertion Loss 6 Lins6 f = 0.05 to 0.5 GHz Insertion Loss 7 Lins7 f = 0.5 to 1.0 GHz 0.22 0.37 dB Insertion Loss 8 Lins8 f = 1.0 to 2.0 GHz 0.24 0.41 dB Insertion Loss 9 Lins9 f = 2.0 to 2.5 GHz 0.26 0.43 dB Insertion Loss 10 Lins10 f = 2.5 to 3.0 GHz 0.28 0.46 dB 23 26 dB Note1 Isolation 6 ISL6 f = 0.05 to 0.5 GHz Isolation 7 ISL7 f = 0.5 to 1.0 GHz 23 26 dB Isolation 8 ISL8 f = 1.0 to 2.0 GHz 23 26 dB Isolation 9 ISL9 f = 2.0 to 2.5 GHz 23 26 dB Isolation 10 ISL10 f = 2.5 to 3.0 GHz 23 26 dB 15 20 dB 15 20 dB 15 20 dB 15 20 dB +12 +15.5 dBm f = 0.5 to 3.0 GHz +15.5 dBm f = 0.5 to 3.0 GHz +19.5 dBm Input Return Loss 3 RLin3 f = 0.05 to 0.5 GHz Input Return Loss 4 RLin4 f = 0.5 to 3.0 GHz Output Return Loss 3 RLout3 f = 0.05 to 0.5 GHz Output Return Loss 4 RLout4 f = 0.5 to 3.0 GHz Note1 Note1 0.1 dB Loss Compression Note2 Input Power Pin (0.1 dB) f = 2.0 GHz/2.5 GHz 1 dB Loss Compression Note3 Input Power Pin (1 dB) Switch Control Current Icont RF None 0.2 1.0 A Switch Control Speed tSW 50% CTL to 90/10% RF 20 200 ns Notes 1. DC cut capacitors = 1 000 pF at f = 0.05 to 0.5 GHz 2. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear range. 3. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear range. Caution This device is used it is necessary to use DC cut capacitors. 4 Data Sheet PG10710EJ01V0DS PG2159T6R EVALUATION CIRCUIT Remark C0 : 0.05 to 0.5 GHz 1 000 pF : 0.5 to 3.0 GHz 56 pF The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Data Sheet PG10710EJ01V0DS 5 PG2159T6R MOUNTING PAD AND SOLDER MASK LAYOUT DIMENSIONS 6-PIN PLASTIC TSSON (T6R) (UNIT: mm) Remark The mounting pad and solder mask layouts in this document are for reference only. 6 Data Sheet PG10710EJ01V0DS PG2159T6R PACKAGE DIMENSIONS 6-PIN PLASTIC TSSON (T6R) (UNIT: mm) Remark A > 0 Data Sheet PG10710EJ01V0DS 7 PG2159T6R RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Wave Soldering Partial Heating Soldering Conditions Condition Symbol Peak temperature (package surface temperature) : 260C or below Time at peak temperature : 10 seconds or less Time at temperature of 220C or higher : 60 seconds or less Preheating time at 120 to 180C : 12030 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Peak temperature (molten solder temperature) : 260C or below Time at peak temperature : 10 seconds or less Preheating temperature (package surface temperature) : 120C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Peak temperature (terminal temperature) : 350C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Caution Do not use different soldering methods together (except for partial heating). 8 Data Sheet PG10710EJ01V0DS IR260 WS260 HS350 PG2159T6R Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. Data Sheet PG10710EJ01V0DS 9