Caution: Observe precautions when handling because these devices are sensitive to electrostatic discharge
L, S-BAND SPDT SWITCH
GaAs INTEGRATED CIRCUIT
PG2159T6R
Document No. PG10710EJ01V0DS (1st edition)
Date Published June 2008 NS
DESCRIPTION
The
PG2159T6R is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed
for mobile phone and another L, S-band applications.
This device can operate 2 control switching by control voltage 1.8 to 3.3 V. This device can operate frequency
from 0.05 GHz to 3.0 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin plastic TSSON (Thin Shrink Small Out-line Non-leaded) (T6R) package. And this
package is able to high-density surface mounting.
FEATURES
• Switch control voltage : Vcont (H) = 1.8 to 3.3 V (2.7 V TYP.)
: Vcont (L) = 0.2 to 0.2 V (0 V TYP.)
• Low insertion loss : Lins1 = 0.20 dB TYP. @ f = 0.05 to 0.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: Lins2 = 0.21 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: Lins3 = 0.23 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: Lins4 = 0.25 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: Lins5 = 0.27 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
• High isolation : ISL1 = 27 dB TYP. @ f = 0.05 to 0.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: ISL2 = 27 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: ISL3 = 27 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: ISL4 = 27 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: ISL5 = 27 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
• Handling power : Pin (1 dB) = +25.5 dBm TYP. @ f = 0.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: Pin (0.1 dB) = +22.0 dBm TYP. @ f = 0.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
• High-density surface mounting : 6-pin plastic TSSON (T6R) package (1.0 1.0 0.37 mm)
APPLICATIONS
• L, S-band digital cellular or cordless telephone
• W-LAN and BluetoothTM
ORDERING INFORMATION
Part Number
Order Number
Package
Marking
Supplying Form
PG2159T6R-E2
PG2159T6R-E2-A
6-pin plastic TSSON
(T6R) (Pb-Free)
G7
Embossed tape 8 mm wide
Pin 1, 6 face the perforation side of the tape
Qty 5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order:
PG2159T6R-A
Data Sheet PG10710EJ01V0DS
2
PG2159T6R
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin No.
Pin Name
1
OUTPUT1
2
GND
3
OUTPUT2
4
Vcont2
5
INPUT
6
Vcont1
Remark Exposed pad : GND
TRUTH TABLE
Vcont1
Vcont2
INPUTOUTPUT1
INPUTOUTPUT2
Low
High
OFF
ON
High
Low
ON
OFF
ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Switch Control Voltage
Vcont
6.0 Note1
V
Input Power
Pin
+26.0 Note2, 4
dBm
Input Power
Pin
+8 + Vcont 20/3 Note3, 4
dBm
Operating Ambient Temperature
TA
45 to +85
C
Storage Temperature
Tstg
55 to +150
C
Notes 1. Vcont1 Vcont2 6.0 V
2. 2.7 V Vcont1 Vcont2 3.3 V
3. 1.8 V Vcont1 Vcont2 2.7 V
4. Please refer to following chart.
Remark The graph indicates nominal characteristics.
Data Sheet PG10710EJ01V0DS
3
PG2159T6R
RECOMMENDED OPERATING RANGE (TA = +25C, unless otherwise specified)
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
Switch Control Voltage (H)
Vcont (H)
1.8
2.7
3.3
V
Switch Control Voltage (L)
Vcont (L)
0.2
0
+0.2
V
ELECTRICAL CHARACTERISTICS 1
(TA = +25C, Vcont (H) = 2.7 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF, unless otherwise specified)
Parameter
Symbol
Test Conditions
MIN.
TYP.
MAX.
Unit
Insertion Loss 1
Lins1
f = 0.05 to 0.5 GHz Note1
0.20
0.35
dB
Insertion Loss 2
Lins2
f = 0.5 to 1.0 GHz
0.21
0.35
dB
Insertion Loss 3
Lins3
f = 1.0 to 2.0 GHz
0.23
0.40
dB
Insertion Loss 4
Lins4
f = 2.0 to 2.5 GHz
0.25
0.42
dB
Insertion Loss 5
Lins5
f = 2.5 to 3.0 GHz
0.27
0.45
dB
Isolation 1
ISL1
f = 0.05 to 0.5 GHz Note1
24
27
dB
Isolation 2
ISL2
f = 0.5 to 1.0 GHz
24
27
dB
Isolation 3
ISL3
f = 1.0 to 2.0 GHz
24
27
dB
Isolation 4
ISL4
f = 2.0 to 2.5 GHz
24
27
dB
Isolation 5
ISL5
f = 2.5 to 3.0 GHz
24
27
dB
Input Return Loss 1
RLin1
f = 0.05 to 0.5 GHz Note1
15
20
dB
Input Return Loss 2
RLin2
f = 0.5 to 3.0 GHz
15
20
dB
Output Return Loss 1
RLout1
f = 0.05 to 0.5 GHz Note1
15
20
dB
Output Return Loss 2
RLout2
f = 0.5 to 3.0 GHz
15
20
dB
0.1 dB Loss Compression
Input Power Note2
Pin (0.1 dB)
f = 2.0 GHz/2.5 GHz
+20.0
+22.0
dBm
f = 0.5 to 3.0 GHz
+22.0
dBm
1 dB Loss Compression
Input Power Note3
Pin (1 dB)
f = 0.5 to 3.0 GHz
+25.5
dBm
2nd Harmonics
2f0
f = 2.0 GHz/2.5 GHz, Pin = +10 dBm
65
77
dBc
3rd Harmonics
3f0
f = 2.0 GHz/2.5 GHz, Pin = +10 dBm
60
80
dBc
Input 3rd Order Intercept Point
IIP3
f = 0.5 to 3.0 GHz, 2 tone
5 MHz spacing
+49.0
dBm
Switch Control Current
Icont
0.2
1.0
A
Switch Control Speed
tSW
50% CTL to 90/10%
20
200
ns
Notes 1. DC cut capacitors = 1 000 pF at f = 0.05 to 0.5 GHz
2. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of
linear range.
3. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of
linear range.
Caution This device is used it is necessary to use DC cut capacitors.
Data Sheet PG10710EJ01V0DS
4
PG2159T6R
ELECTRICAL CHARACTERISTICS 2
(TA = +25C, Vcont (H) = 1.8 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF, unless otherwise specified)
Parameter
Symbol
Test Conditions
MIN.
TYP.
MAX.
Unit
Insertion Loss 6
Lins6
f = 0.05 to 0.5 GHz Note1
0.21
0.36
dB
Insertion Loss 7
Lins7
f = 0.5 to 1.0 GHz
0.22
0.37
dB
Insertion Loss 8
Lins8
f = 1.0 to 2.0 GHz
0.24
0.41
dB
Insertion Loss 9
Lins9
f = 2.0 to 2.5 GHz
0.26
0.43
dB
Insertion Loss 10
Lins10
f = 2.5 to 3.0 GHz
0.28
0.46
dB
Isolation 6
ISL6
f = 0.05 to 0.5 GHz Note1
23
26
dB
Isolation 7
ISL7
f = 0.5 to 1.0 GHz
23
26
dB
Isolation 8
ISL8
f = 1.0 to 2.0 GHz
23
26
dB
Isolation 9
ISL9
f = 2.0 to 2.5 GHz
23
26
dB
Isolation 10
ISL10
f = 2.5 to 3.0 GHz
23
26
dB
Input Return Loss 3
RLin3
f = 0.05 to 0.5 GHz Note1
15
20
dB
Input Return Loss 4
RLin4
f = 0.5 to 3.0 GHz
15
20
dB
Output Return Loss 3
RLout3
f = 0.05 to 0.5 GHz Note1
15
20
dB
Output Return Loss 4
RLout4
f = 0.5 to 3.0 GHz
15
20
dB
0.1 dB Loss Compression
Input Power Note2
Pin (0.1 dB)
f = 2.0 GHz/2.5 GHz
+12
+15.5
dBm
f = 0.5 to 3.0 GHz
+15.5
dBm
1 dB Loss Compression
Input Power Note3
Pin (1 dB)
f = 0.5 to 3.0 GHz
+19.5
dBm
Switch Control Current
Icont
RF None
0.2
1.0
A
Switch Control Speed
tSW
50% CTL to 90/10% RF
20
200
ns
Notes 1. DC cut capacitors = 1 000 pF at f = 0.05 to 0.5 GHz
2. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of
linear range.
3. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of
linear range.
Caution This device is used it is necessary to use DC cut capacitors.
Data Sheet PG10710EJ01V0DS
5
PG2159T6R
EVALUATION CIRCUIT
Remark C0 : 0.05 to 0.5 GHz 1 000 pF
: 0.5 to 3.0 GHz 56 pF
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
Data Sheet PG10710EJ01V0DS
6
PG2159T6R
MOUNTING PAD AND SOLDER MASK LAYOUT DIMENSIONS
6-PIN PLASTIC TSSON (T6R) (UNIT: mm)
Remark The mounting pad and solder mask layouts in this document are for reference only.
Data Sheet PG10710EJ01V0DS
7
PG2159T6R
PACKAGE DIMENSIONS
6-PIN PLASTIC TSSON (T6R) (UNIT: mm)
Remark A > 0
Data Sheet PG10710EJ01V0DS
8
PG2159T6R
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reflow
Peak temperature (package surface temperature) : 260C or below
Time at peak temperature : 10 seconds or less
Time at temperature of 220C or higher : 60 seconds or less
Preheating time at 120 to 180C : 12030 seconds
Maximum number of reflow processes : 3 times
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
IR260
Wave Soldering
Peak temperature (molten solder temperature) : 260C or below
Time at peak temperature : 10 seconds or less
Preheating temperature (package surface temperature) : 120C or below
Maximum number of flow processes : 1 time
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
WS260
Partial Heating
Peak temperature (terminal temperature) : 350C or below
Soldering time (per side of device) : 3 seconds or less
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
HS350
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PG10710EJ01V0DS 9
PG2159T6R
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the
following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
