5900 Shepherd Mountain Cove • Austin, TX 78730
Phone: 512 / 794-0081 • Fax: 512 / 794-0087 • Toll Free: 800 / 950-8365
e-mail: sales@venkel.com • www.venkel.com
53
Thick Film Chip Resistors — Anti-Sulfuration
L
W
T
c c
d d
3 DIGIT
(J TOL.)
Jumper
e.g.2R2=2.2Ω
103=10KΩ
4 DIGIT
(F TOL.)
e.g.10R2=10.2Ω
1002=10kΩ
103
PACKAGING
B:BULK
T:TAPE
Add only if
13" Reel required
TCRS1206-8W
SERIES
J
TOLERANCE AT 25°C
F: ± 1%
J: ± 5%
—13
—
0603 — 1% Chip Resistors may not be marked. (For CRS Series)
Please consult your salesperson if marking is required.
(See the data sheet on Marking Codes)
*E-24 Standard Resistance values that are available in 1%, may be
marked with a 3-digit code identifier.
* NOTE: 0201 and 0402 Resistors cannot be marked.
(No Tolerence specified for the Zero Ohm)
3 zero’s
• High stability Thick Film Chip Resistor
• Special (patented) termination prevents sulfuration in a sulfur containing environment
• TCR ±100ppm
Features
Specifications
Rating
Series Rated Power Maximum *Maximum Overload Operating Resistance
at 70°C Working Voltage Voltage Temperature Range Range
CRS0201-20W 0.05W PR or 25V whichever is less 50V -55°C ~ 150°C 10W ~ 1MW
CRS0402-16W 0.063W PR or 50V whichever is less 100V -55°C ~ 150°C 1W ~ 1MW
CRS0603-16W 0.063W PR or 75V whichever is less 150V -55°C ~ 150°C 1W ~ 1MW
CRS0805-10W 0.10W PR or 150V whichever is less 200V -55°C ~ 150°C 1W ~ 1MW
CRS1206-8W 0.125W PR or 175V whichever is less 300V -55°C ~ 150°C 1W ~ 1MW
CRS1210-4W 0.25W PR or 200V whichever is less 400V -55°C ~ 150°C 1W ~ 1MW
CRS0201 CRS0402 CRS0603 CRS0805 CRS1206 CRS1210
L 0.024 ± .002 0.040 ± .002 0.063 ± .008 0.079 ± .008 0.126 ± .008 0.126 ± .008
(0.6 ± 0.05) (1.0 ± 0.05) (1.6 ± 0.2) (2.0 ± 0.2) (3.2 ± 0.2) (3.2 ± 0.2)
W 0.012 ± .001 0.020 ± .002 0.031 ± .008 0.050 ± .008 0.063 ± .008 0.098 ± .006
(0.3 ± 0.02) (0.5 ± 0.05) (0.8 ± 0.2) (1.25 ± 0.02) (1.6 ± 0.2) (2.50 ± 0.15)
T 0.010 ± .002 0.014 ± .002 0.014 ± .004 0.018 ± .006 0.022 ± .006 0.022 ± .006
(0.25 ± 0.05) (0.35 ± 0.05) (0.45 ± 0.10) (0.45 ± 0.15) (0.57 ± 0.15) (0.56 ± 0.15)
c 0.006 ± .002 0.008 ± .004 0.010 ± .006 0.016 ± .008 0.018 ± .008 0.018 ± .008
(0.15 ± 0.05) (0.2 ± 0.01) (0.25 ± 0.15) (0.4 ± 0.2) (0.45 ± 0.2) (0.45 ± 0.2)
d 0.006 ± .002 0.008 ± .004 0.010 ± .006 0.012 ± .008 0.012 ± .008 0.012 ± .008
(0.15 ± 0.05) (0.2 ± 0.01) (0.25 ± 0.15) (0.3 ± 0.2) (0.3 ± 0.2) (0.3 ± 0.2)
Unit: inches (mm)
NOTE: * Overload Voltage=2.5*√(P*R) or Max. overload voltage listed above, whichever is lower.
Markings on Thick Film Chip Resistors may have an internal lot identification code or the E-24 (5%) or E-96 (1%) marking code. If value identification is required,
please consult your sales person for availability.
Values available in the E-24 Series that are crossover values (same value for 1% and 5%) will typically be marked with a 3-digit E-24 Series marking code.
How To Order
Structure
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩