F-219 IPS1-120-01-L-D-VS IPS1-125-01-L-D (2.54 mm) .100" IPS1 SERIES SHROUDED POWER CONNECTOR SET Mates with: IPT1 SPECIFICATIONS Each contact individually shrouded for electrical and mechanical protection For complete specifications see www.samtec.com?IPS1 Insulator Material: Black LCP Contact Material: Phosphor Bronze Plating: Sn or Au over 50 " (1.27 m) Ni Operating Temp Range: -55 C to +105 C with Tin; -55 C to +125 C with Gold Insertion Depth: (3.81 mm) .150" to (6.48 mm) .255" Wiping Distance: (0.38 mm) .015" Voltage Rating: 775 VAC/1095 VDC Standard Creepage: (2.55 mm) .100" (without -LC) (1.08 mm) .043" (with -LC) Standard Clearance: (1.75 mm) .069" (without -LC) (0.62 mm) .024" (with -LC) RoHS Compliant: Yes PINS 1 2 3 4 50 CREEPAGE AND CLEARANCE Selectively loading contacts achieves customer specific creepage and clearance requirements. Contact asp@samtec.com IPT1/IPS1 CURRENT RATING (PER CONTACT) 5.9 A 4.8 A 4.1 A 3.6 A 2.3 A IPS1 1 (4.70 mm) .185" Choice of through-hole or surface mount * Locking clip option NO. PINS PER ROW 01 PLATING OPTION D = 10 " (0.25 m) Gold on contact, Matte Tin on tail (Standard sizes) PROCESSING -VS = Surface Mount -RA = Right-angle No. of positions x (2.54) .100 + (0.38) .015 50 02 (4.95) .195 RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality (2.54) 49 .100 (2.54) .100 Through-hole -K = (5.50 mm) .217" DIA Polyimide film Pick & Place Pad (-VS only) Surface Mount (7.87) .310 (MOQ Required) Note: Some sizes, styles and options are non-standard, non-returnable. -LC = Locking Clip (Manual placement required) (-VS only) -TR 01 ALSO AVAILABLE Other sizes Other platings Latching feature No. 1 position polarized OTHER OPTION = Tape & Reel Packaging (-VS only) FILE NO. E111594 * * * * TAIL OPTION Leave blank for Through-hole -L 05, 10, 15, 20, 25 Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.13 mm) .005" max (05-10)* (0.15 mm) .006" max (15-25)* *(.004" stencil solution may be available; contact IPG@samtec.com) * Individually shrouded contacts (3.81) .150 (8.51) .335 (2.54) .100 (0.41) .016 (0.51) .020 (1.27) .050 (0.79) .031 (2.54) .100 -VS Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. (2.54) .100 -RA