Reflective Object Sensor OPB703 through OPB705, OPB&03WZ through OPB705WZ, OPB701Wz through OPB70HWZ Features: * * * * * Phototransistor output High sensitivity Low-cost plastic housing Available with lenses for dust protection and ambient light filtration Focused for maximum sensitivity WZ Version Description: The OPB703, OPB704 and OPB705 consist of an Infrared (890nm) Light Emi ng Diode (LED) and a NPN silicon Phototransistor, mounted side-by-side on converging op cal axes in a black plas c housing and are designed for PCBoard moun ng. The OPB703WZ, OPB704WZ, OPB705WZ and OPB70BWZ are designed for remote moun ng u lizing interconnect wires of UL approved 26 AWG, 24" (61.0cm) minimum length, stripped and nned. The OPB70AWZ consists of an Infrared (890nm) Light Emi ng Diode (LED) and a NPN silicon Photodarlington, mounted side-byside on converging op cal axes in a black plas c housing and is designed for remote moun ng u lizing interconnect wires of UL approved 26 AWG, 24" (61.0cm) minimum length, stripped and nned. The OPB70CWZ through OPB70FWZ consist of a Visible (Red 640nm) Light Emi ng Diode (LED) and a NPN silicon Phototransistor or Rbe Phototransistor, mounted side-by-side on converging op cal axes in a black plas c housing and are designed for remote moun ng u lizing interconnect wires of UL approved 26 AWG, 24" (61.0cm) minimum length, stripped and nned. Various lens op ons are available: No lens for the (OPB703, OPB703WZ), blue window for dust protec on for the (OPB704, OPB704WZ, OPB70BWZ, OPB70HWZ) and aperture lens for improved resolu on for the (OPB705, OPB705WZ, OPB70AWZ, OPB70CWZ, OPB70DWZ). The OPB704G and OPB704GWZ offers excellent protec on for dirty environments. The phototransistor responds to illumina on from the emi er when a reflec ve object passes within the field of view centered typically at 0.15" (3.8 mm). Custom electrical, wire, cabling and connectors are available. Contact your local representa ve or OPTEK for more informa on. Ordering Informaon Part LED Peak Detector OPB703 None OPB703WZ Applications: * * * * * * * * Non-contact reflective object sensor Assembly line automation Machine automation Machine safety End of travel sensor Door sensor Mark Detection Office Equipment 0.160" Leads 24" / 26 AWG Wire OPB704 0.160" Leads 24" / 26 AWG Wire Transistor OPB70HWZ OPB704G Blue Window 890 nm 24" / 26 AWG Wire OPB705 0.160" Leads Aperture OPB705WZ OPB70AWZ Darlington OPB70BWZ Rbe Transistor OPB70CWZ Rbe Transistor OPB70FWZ General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. 24" / 26 AWG Wire 0.160" Leads OPB704GWZ OPB70EWZ (c) TT electronics plc Lead or Wire OPB704WZ OPB70DWZ RoHS Opcal Cover 640 nm Transistor Rbe Transistor Transistor Blue Window Aperture 24" / 26 AWG Wire Clear Window OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue F 06/2016 Page 1 Reflective Object Sensor OPB703 through OPB705, OPB&03WZ through OPB705WZ, OPB701Wz through OPB70HWZ OPB703, OPB704, OPB705 OP- B703, OP- 1 4 2 3 OPB703WZ, OPB704WZ, OPB705WZ, OPB70AWZ, OPB70BWZ, OPB70CWZ, OPB70DWZ General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT electronics plc Anode Collector Cathode Emitter Anode Cath- Collector Emitter An- Cathode Collector Emitter OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue F 06/2016 Page 2 Reflective Object Sensor OPB703 through OPB705, OPB&03WZ through OPB705WZ, OPB701Wz through OPB70HWZ OPB704G OPB704GWZ General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT electronics plc OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue F 06/2016 Page 3 Reflective Object Sensor OPB703 through OPB705, OPB&03WZ through OPB705WZ, OPB701Wz through OPB70HWZ Absolute Maximum Rangs (TA=25C unless otherwise noted) Storage Temperature Range -40C to +80 C 240 C(1) Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 sec. with soldering iron] Input Diode Forward DC Current 40 mA Reverse DC Voltage 2V 100 mW(2) Power Dissipa on Output Photodetector Collector-Emi er Voltage Phototransistor Photodarlington 30 V 15 V Emi er-Collector Voltage 5V Collector DC Current 25 mA 100 mW(2) Power Dissipa on Notes: (1) RMA flux is recommended. Dura on can be extended to 10 seconds maximum when flow soldering. (2) For OPB703WZ, OPB704WZ, OPB705WZ, OPB70BWZ, OPB704G, OPB704GWZ and OPB70HWZ derate linearly 1.82 mW/ C above 25 C. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT electronics plc OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue F 06/2016 Page 4 Reflective Object Sensor OPB703 through OPB705, OPB&03WZ through OPB705WZ, OPB701Wz through OPB70HWZ Electrical Characteriscs (TA = 25 C unless otherwise noted) (OPB703, OPB703WZ, OPB704, OPB704WZ, OPB705, OPB705WZ, OPB704G, OPB704GWZ, OPB70HWZ) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP265 for addi onal informa on -- for reference only) VF Forward Voltage - - 1.7 V IF = 40mA IR Reverse Current - - 100 A VR = 2 V Output Phototransistor (See OP505 for addi onal informa on -- for reference only) V(BR)CEO Collector-Emi er Breakdown Voltage 30 - - V ICE = 100 A V(BR)ECO Emi er-Collector Breakdown Voltage 5 - - V IEC = 100A Collector Dark Current - - 250 nA VCE = 10 V, IF = 0, EE =0 On-State Collector Current OPB70HWZ OPB703, OPB703WZ OPB704, OPB704WZ 0.60 0.30 0.20 - 3.5 2.5 2.5 mA OPB704G, OPB704GWZ 0.50 - 6.0 - - 20 20 ICEO Coupled IC(ON) ICX Crosstalk OPB703, OPB703WZ OPB704, OPB704WZ, OPB70HWZ VCE = 5 V, IF = 40mA , d = 0.15" (4)(6) VCE = 5 V, IF = 40mA , d = 0.20" (4)(6) A VCE = 5 V, IF = 40mA(5) Notes: (1) RMA flux is recommended. Dura on can be extended to 10 seconds maximum when flow soldering. (2) For OPB703, OPB704 and OPB705, derate linearly 1.67 mW/ C above 25 C. (3) For OPB703WZ, OPB704WZ, OPB705WZ, OPB70BWZ, OPB704G, OPB704GWZ, OPB70HWZ, OPB70AWZ, OPB70CWZ, OPB70DWZ, OPB70EWZ, and OPB70FWZ derate linearly 1.82 mW/ C above 25 C. (4) The distance from the assembly face to the reflec ve surface is d. (5) Crosstalk (ICX) is the collector current measured with the indicated current in the input diode and with no reflec ng surface. (6) Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflec ng surface. Reference: Eastman Kodak, Catalog # E 152 7795. (7) All parameters tested using pulse techniques. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT electronics plc OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue F 06/2016 Page 5 Reflective Object Sensor OPB703 through OPB705, OPB&03WZ through OPB705WZ, OPB701Wz through OPB70HWZ Electrical Characteriscs (TA = 25 C unless otherwise noted) (OPB70AWZ) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP265 for addi onal informa on -- for reference only) VF Forward Voltage - - 1.7 V IF = 40mA IR Reverse Current - - 100 A VR = 2 V Output PhotoDarlington (See OP535 for addi onal informa on -- for reference only) V(BR)CEO Collector-Emi er Breakdown Voltage 15 - - V ICE = 1.0 mA, EE =0 V(BR)ECO Emi er-Collector Breakdown Voltage 5 - - V IEC = 100A, EE =0 Collector Dark Current - - 250 nA VCE = 10 V, IF = 0, EE =0 5.0 - 26.0 mA VCE = 5 V, IF = 40mA , d = 0.15" (1)(3) ICEO Coupled IC(ON) On-State Collector Current V(SAT) Satura on Voltage - - 1.15 V IC = 400 A, IF = 40mA , d = 0.15" (1)(3) Crosstalk - - 25 A VCE = 5 V, IF = 40mA(2) ICX Notes: (1) The distance from the assembly face to the reflec ve surface is d. (2) Crosstalk (ICX) is the collector current measured with the indicated current in the input diode and with no reflec ng surface. (3) Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflec ng surface. Reference: Eastman Kodak, Catalog # E 152 7795. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT electronics plc OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue F 06/2016 Page 6 Reflective Object Sensor OPB703 through OPB705, OPB&03WZ through OPB705WZ, OPB701Wz through OPB70HWZ Electrical Characteriscs (TA = 25 C unless otherwise noted) (OPB70BWZ) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP265 for addi onal informa on -- for reference only) VF Forward Voltage - - 1.7 V IF = 40mA IR Reverse Current - - 100 A VR = 2 V Output Phototransistor (See OP705 for addi onal informa on -- for reference only) V(BR)CEO Collector-Emi er Breakdown Voltage 30 - - V ICE = 100 A V(BR)ECO Emi er-Collector Breakdown Voltage 0.4 - - V IEC = 100A - - 100 nA VCE = 10 V, IF = 0, EE =0 0.50 - 3.0 mA VCE = 5 V, IF = 40mA , d = 0.15" (1)(3) - - 5 A VCE = 5 V, IF = 40mA(2) ICEO Collector Dark Current Coupled IC(ON) ICX On-State Collector Current OPB70BWZ Crosstalk OPB70BWZ Notes: (1) The distance from the assembly face to the reflec ve surface is d. (2) Crosstalk (ICX) is the collector current measured with the indicated current in the input diode and with no reflec ng surface. (3) Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflec ng surface. Reference: Eastman Kodak, Catalog # E 152 7795. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT electronics plc OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue F 06/2016 Page 7 Reflective Object Sensor OPB703 through OPB705, OPB&03WZ through OPB705WZ, OPB701Wz through OPB70HWZ Electrical Characteriscs (TA = 25 C unless otherwise noted) (OPB70CWZ and OPB70EWZ) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OVLAS6CB8 for addi onal informa on -- for reference only) VF Forward Voltage - - 2.6 V IF = 40mA IR Reverse Current - - 100 A VR = 2 V Output Phototransistor (See OP505 for addi onal informa on -- for reference only) V(BR)CEO Collector-Emi er Breakdown Voltage 30 - - V ICE = 100A, IF = 0, EE =0 V(BR)ECO Emi er-Collector Breakdown Voltage 0.4 - - V IEC = 100A, IF = 0, EE =0 - - 100 nA VCE = 10 V, IF = 0, EE =0 .10 - 1.0 mA VCE = 5 V, IF = 40mA , d = 0.15" (21(3) ICEO Collector Dark Current Coupled IC(ON) On-State Collector Current V(SAT) ICX OPB70CWZ OPB70EWZ .25 - 2.5 Satura on Voltage - - 0.4 V IC = 100 A, IF = 40mA , d = 0.15" (1)(3) Crosstalk - - 2 A VCE = 5 V, IF = 40mA(2) Notes: (1) The distance from the assembly face to the reflec ve surface is d. (2) Crosstalk (ICX) is the collector current measured with the indicated current in the input diode and with no reflec ng surface. (3) Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflec ng surface. Reference: Eastman Kodak, Catalog # E 152 7795. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT electronics plc OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue F 06/2016 Page 8 Reflective Object Sensor OPB703 through OPB705, OPB&03WZ through OPB705WZ, OPB701Wz through OPB70HWZ Electrical Characteriscs (TA = 25 C unless otherwise noted) (OPB70DWZ and OPB70FWZ) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OVLAS6CB8 for addi onal informa on -- for reference only) VF Forward Voltage - - 2.6 V IF = 40mA IR Reverse Current - - 100 A VR = 2 V Output Phototransistor (See OP505 for addi onal informa on -- for reference only) V(BR)CEO Collector-Emi er Breakdown Voltage 30 - - V ICE = 100A, IF = 0, EE =0 V(BR)ECO Emi er-Collector Breakdown Voltage 5.0 - - V IEC = 100A, IF = 0, EE =0 - - 250 nA VCE = 10 V, IF = 0, EE =0 .10 - 1.5 mA VCE = 5 V, IF = 40mA , d = 0.15" (1)(3) ICEO Collector Dark Current Coupled IC(ON) On-State Collector Current V(SAT) ICX OPB70DWZ OPB70FWZ .25 - 3.5 Satura on Voltage - - 0.4 V IC(ON) = 100 A, IF = 40mA , d = 0.15" (1)(3) Crosstalk - - 5.0 A VCE = 5 V, IF = 40mA(2) Notes: (1) The distance from the assembly face to the reflec ve surface is d. (2) Crosstalk (ICX) is the collector current measured with the indicated current in the input diode and with no reflec ng surface. (3) Measured using Eastman Kodak neutral white test card with 90% diffuse reflectance as a reflec ng surface. Reference: Eastman Kodak, Catalog # E 152 7795. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT electronics plc OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue F 06/2016 Page 9 Reflective Object Sensor OPB703 through OPB705, OPB&03WZ through OPB705WZ, OPB701Wz through OPB70HWZ OPB704 - Output vs Distance OPB703 - Output vs Distance 1.8 1.8 Normalized at IF = 40 mA Distance = 0.15" & Kodak 90% Normalized at IF = 40 mA Distance = 0.15" & Kodak 90% 1.6 1.6 1.4 1.4 Normalized Output 1.2 Normalized Output Kodak 90% Kodak 19% Avery Corporate Retro Reflective 1.0 0.8 0.6 Kodak 90% Kodak 19% Copier Paper Avery Label Retro Reflective 1.2 1.0 0.8 0.6 0.4 0.4 0.2 0.2 0.0 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0.0 1.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Distance (inches) Distance (inches) Forward Voltage vs Forward Current vs Temp OPB705 - Output vs Distance 1.6 1.8 Normalized at IF = 40 mA Distance = 0.15" & Kodak 90% Normalized Forward Current at 20 mA and 20 C 1.6 1.4 Kodak 90% Kodak 19% Copier Paper Avery Labels Retro Reflective 1.2 1.0 Typical Forward Voltage Normalized Output 1.4 0.8 0.6 1.2 1.0 -40 C -20 C 0 C 0.4 0.8 20 C 40 C 0.2 60 C 80 C 0.0 0.6 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Distance (inches) General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT electronics plc 0 5 10 15 20 25 30 35 40 Forward Current (mA) OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue F 06/2016 Page 10 Reflective Object Sensor OPB703 through OPB705, OPB&03WZ through OPB705WZ, OPB701Wz through OPB70HWZ General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT electronics plc OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue F 06/2016 Page 11 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TT Electronics: OPB70HWZ