1. Product profile
1.1 General description
Hybrid high dynamic range amplifier module in SOT115J package operating at a supply
voltage of 24 V (DC).
1.2 Features
nExcellent linearity
nExtremely low noise
nExcellent return loss properties
nSilicon nitride passivation
nRugged construction
nGold metallization ensures excellent reliability
1.3 Applications
nCATV systems operating in the 40 MHz to 750 MHz frequency range.
1.4 Quick reference data
[1] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.
BGD712C
750 MHz, 18 dB gain push-pull amplifier
Rev. 01 — 2 May 2006 Product data sheet
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
Table 1: Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
Gppower gain f = 45 MHz 18.2 - 18.8 dB
f = 750 MHz 19 - 20 dB
Itot total current VB=24V [1] 380 - 410 mA
BGD712C_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet Rev. 01 — 2 May 2006 2 of 7
Philips Semiconductors BGD712C
750 MHz, 18 dB gain push-pull amplifier
2. Pinning information
3. Ordering information
4. Limiting values
Table 2: Pinning
Pin Description Simplified outline Symbol
1 input
2 common
3 common
5+V
B
7 common
8 common
9 output
91357
2378
5
91
sym095
Table 3: Ordering information
Type number Package
Name Description Version
BGD712C - rectangular single-ended package; aluminium flange;
2 vertical mounting holes; 2 × 6-32 UNC and 2 extra
horizontal mounting holes; 7 gold-plated in-line leads
SOT115J
Table 4: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VBsupply voltage - 30 V
Viinput voltage - 70 dBmV
Tstg storage temperature −40 +100 °C
Tmb mounting base temperature −20 +100 °C
BGD712C_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet Rev. 01 — 2 May 2006 3 of 7
Philips Semiconductors BGD712C
750 MHz, 18 dB gain push-pull amplifier
5. Characteristics
[1] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.
Table 5: Characteristics
Bandwidth 40 MHz to 750 MHz; V
B
= 24 V; T
mb
=35
°
C; Z
S
=Z
L
=75
Ω
.
Symbol Parameter Conditions Min Typ Max Unit
Gppower gain f = 45 MHz 18.2 - 18.8 dB
f = 750 MHz 19.0 - 20.0 dB
SL slope cable equivalent f = 45 MHz to 750 MHz 0.5 - 1.5 dB
FL flatness of frequency response f = 45 MHz to 100 MHz - - ±0.35 dB
f = 100 MHz to 700 MHz - - ±0.5 dB
f = 700 MHz to 750 MHz - - ±0.15 dB
S11 input return losses f = 45 MHz to 790 MHz 17 - - dB
S22 output return losses f = 45 MHz to 790 MHz 17 - - dB
ϕs21 phase response f = 50 MHz 135 - 225 deg
CTB composite triple beat 112 channels flat;
Vo= 44 dBmV;
measured at 745.25 MHz
--−62 dB
60 channels flat;
Vo= 44 dBmV
measured at 745.25 MHz
-−67 - dB
79 channels flat;
Vo= 44 dBmV
measured at 547.25 MHz
--−68 dB
CSO composite second-order
distortion 112 channels flat;
Vo= 44 dBmV;
measured at 746.5 MHz
--−63 dB
60 channels flat;
Vo= 44 dBmV
measured at 746.5 MHz
-−70 - dB
79 channels flat;
Vo= 44 dBmV
measured at 548.5 MHz
--−68 dB
NF noise figure f = 50 MHz - - 7 dB
f = 750 MHz - - 7 dB
Itot total current [1] 380 - 410 mA
BGD712C_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet Rev. 01 — 2 May 2006 4 of 7
Philips Semiconductors BGD712C
750 MHz, 18 dB gain push-pull amplifier
6. Package outline
Fig 1. Package outline SOT115J
UNIT A2
max. cee
1q
Q
max. q1q2U2
U1W
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 20.8 9.1 0.51
0.38 0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 4.15
3.85 2.4 38.1 25.4 10.2 4.2 44.75
44.25 8.2
7.8 0.25 0.1 3.8
bF
p
6-32
UNC
yw
0.7
x
S
DIMENSIONS (mm are the original dimensions)
SOT115J
0 5 10 mm
scale
A
max. D
max. L
min.
E
max. Z
max.
Rectangular single-ended package; aluminium flange; 2 vertical mounting holes;
2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads SOT115J
D
U1q
q2
q1
b
F
S
A
Z p
E
A2
L
c
d
Q
U2
M
w
78923
Wee1
5
p
1
d
max.
xMB
yMB
B
99-02-06
04-02-04
yMB
BGD712C_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet Rev. 01 — 2 May 2006 5 of 7
Philips Semiconductors BGD712C
750 MHz, 18 dB gain push-pull amplifier
7. Revision history
Table 6: Revision history
Document ID Release date Data sheet status Change notice Supersedes
BGD712C_1 20060502 Product data sheet - -
BGD712C_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet Rev. 01 — 2 May 2006 6 of 7
Philips Semiconductors BGD712C
750 MHz, 18 dB gain push-pull amplifier
8. Legal information
8.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.semiconductors.philips.com.
8.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Philips Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Philips Semiconductors
sales office. In case of any inconsistency or conflict with the short data sheet,
the full data sheet shall prevail.
8.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, Philips Semiconductors does not give any representations
or warranties, expressed or implied, as to the accuracy or completeness of
such information and shall have no liability for the consequences of use of
such information.
Right to make changes — Philips Semiconductors reserves the right to
make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — Philips Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a Philips Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. Philips Semiconductors accepts no liability for inclusion and/or use
of Philips Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is for the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Philips Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and and
operation of the device at these or any other conditions above those given in
the Characteristics sections of this document is not implied. Exposure to
limiting values for extended periods may affect device reliability.
Terms and conditions of sale — Philips Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.semiconductors.philips.com/profile/terms, including those
pertaining to warranty, intellectual property rights infringement and limitation
of liability, unless explicitly otherwise agreed to in writing by Philips
Semiconductors. In case of any inconsistency or conflict between information
in this document and such terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
8.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
9. Contact information
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
Philips Semiconductors BGD712C
750 MHz, 18 dB gain push-pull amplifier
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
For more information, please visit: http://www.semiconductors.philips.com.
For sales office addresses, email to: sales.addresses@www.semiconductors.philips.com.
Date of release: 2 May 2006
Document identifier: BGD712C_1
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
10. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description. . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 4
7 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 5
8 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 6
8.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 6
8.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
8.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
8.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
9 Contact information. . . . . . . . . . . . . . . . . . . . . . 6
10 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
