INDEX GENERAL PRODUCTS INDEX Scope of Sumida products, General stipulations for coil use PAGE 3 NEW PRODUCTS POWER INDUCTORS L.P.F.COILS FOR DIGITAL AMP INVERTER TRANSFORMERS INVERTER UNIT CMCM104 CDEP125ME CDH2D09(/S) CDH3D11(/S) CDSH3D11(/S) CDRH8D38/A CDRH127C/A CDR6D23MN CDR6D28MN CDR7D28MN CDR7D43MN CDR10D48MN CDRH4D16FB CDRH5D16F/LD CDPH4D19F CDRH6D26FB CDRH10D43F 11 CDEPI106 DEPI1615 CPUDL294 CEIDL318 CEIDL377 CEIDL369 EIDL369 CIUH11D66 24 - 25 26 27 IV120307 CLS4D18 CLS4D28 CLS6D28 CLQ5D27 CLQ7D23 SIGNAL COMMON MODE CHOKE COILS CPFC805 CPF6D36 CBM6068 AS737 ANTENNA/FILTER CEP79 CPE1311C For xDSL LINE TRANSFORMERS CEP1311 EP1311 GAS DISCHARGE TUBE Switching Spark Gaps-Sparctube 4 5 6 7 8 9 - 10 32 33 41 42 47 48 52 53 DC/DC CONVERTER TRANSFORMERS TM 72 - 73 PRODUCTS SMD TYPE PIN TYPE SMD TYPE PIN TYPE SMD TYPE PIN TYPE SIGNAL COMMON MODE CHOKE COILS DC COMMON MODE CHOKE COILS NORMAL MODE CHOKE COILS AC COMMON MODE CHOKE COILS ANTENNAS For xDSL LINE TRANSFORMERS For xDSL POTS SPLITTER COILS For xDSL COMMON MODE CHOKE COIL STB/FAX/MODEM TRANSFORMERS LAN LINE TRANSFORMERS 10/100 BESE PULSE TRANSFORMERS RADIO CONTROL CLOCK ANTENNAS AUDIO/VIDEO FILTERS IFT RF COILS QUADRATURE DETECTOR COILS VCO COIL HELICAL FILTER ANTENNA LOADING COIL MOLD COILS BALUN FIXED INDUTORS FOR TAPE RECORDER VARIABLE INDUCTORS 12 - 20 21 - 23 28 - 30 31 34 - 36 37 - 40 43 43 44 45 - 46 49 - 50 51 54 - 55 56 57 - 61 62 63 64 65 66 67 68 68 68 68 69 69 70 71 Dimensions for embossed tape and reel packing with packed QTY 74-75 POWER INDUCTORS INVERTER TRANSFORMERS DC/DC CONVERTER TRANSFORMERS Specifications in this catalog are subject to change without notice. It is requested to confirm the specifications when ordering. Any dimensions without tolerance is typical value. Sumida declares that any ozone depleting substance is not used in the all coil manufacturing process. We recommend to use resist to protect from solder bridge. 2 N Scope of Sumida products, General stipulations for coil use Scope of Sumida products 1. Sumida components are manufactured and promoted for use in general AV electronics, home appliances, OAs, communications, measurement equipments and machine tools. 2. In the event the product is used in aerospace equipment, medical equipment, transportation equipment, disaster preventing equipment, or an equivalent which may affect human health or property, please do not fail to consult with our business headquarters, branch or business office. When the suggested recommendations are not heeded, Sumida Group shall not be held liable for any dysfunctious in or damage to the equipment with which the product is used. 3. In the event a problem occurs which may affect industrial property and any other rights of Sumida Group (or a third party) during the use of the product and information described in this catalog, Sumida Group shall not be held liable N for any such problem, nor grant any license to the offending party. General stipulations for coil use 1. Products should not be kept in unsuitable storage conditions, such as areas susceptible to high temperatures, high humidity, dust or corrosion. 2. Always handle products with care. 3. Don't touch electrodes directly with bare hands as oil secretions may inhibit soldering. Always ensure optimum conditions for soldering. 4. Don't bend the terminals or subject them to excessive stress. 5. Please ensure that all terminals and case lugs are completely fixed with solder onto PCB. 6. Ensure the tuning slug or cap is not fixed by solder flux during the production process. 7. Refrain from rinsing coils. If necessary, please consult with our company. 8. Avoid placing coils near the edge of the PCB. 9. Our SMD coils are designed for automatic mounting. Please be careful if soldering by hand. 10. Don't touch any exposed winding part and avoid coming into contact with the guide of electrode in automatic mounting. 11. Our specification limits the quality of the component as a single unit. Please ensure the component is thoroughly evaluated in your application circuit. 12. When using our high voltage inverter transformers, place 2mm away from the electric conductor. 13. About Lead-free Products Lead-free products are now available for sale To order a lead-free product, please add NP after the product type: e.g. Ordering code of lead product: Type name-x Ordering code of lead-free product: Type name NPx 3 POWER INDUCTORS POWER INDUCTORS Power Inductors <SMD Type> OUTLINE By using the square wire, power inductors can de used for large current with low profile and low resistance. CMCM104 K DIMENSIONS(mm) 11.5 K LANDPATTERNS(mm) 6.6 Max.4.0 4.0 10.0 4.5 Min.0.01 3.8 6 3.8 K SPECIFICATIONS PartNo. D.C.R.() SaturationRatedCurrent(A) Max.(Typ.) (at20)1 Inductance CMCM104 0.36H20% 1.20m TemperatureRiseCurrent(typ)(A) 2 37.01 27.0 1: Saturation Rated Current:The current when the inductance becomes 20% lower than its intial value. 2: Temperature Rise Current (Typ.):The actual current when temperature of coil becomes T=40 (Ta=20) OUTLINE By using the square wire, power inductors can de used for large current with low profile and low resistance. K DIMENSIONS(mm) Max,5.5 12.50.4 2.3 4.0 10.0 8.50.2 2.60.2 2.60.2 7.00.2 12.50.4 K LANDPATTERNS(mm) 2.10.2 CDEP125ME 8.2 13.5 K SPECIFICATIONS PartNo. Inductance D.C.R.() SaturationRatedCurrent(A) Max.(Typ.) (at20)1 2 CDEP12SMENP-0R3MC 0.3H25% 1.00m 40.0 21.0 CDEP12SMENP-0R7MC 0.7H25% 1.70m 32.0 20.0 CDEP12SMENP-1R2MC 1.2H25% 2.60m 25.6 17.5 CDEP12SMENP-2R0MC 2.0H25% 4.10m 20.4 13.5 CDEP12SMENP-2R9MC 2.9H25% 6.30m 16.0 11.5 1: Saturation Rated Current:The current when the inductance becomes 20% lower than its nominal value. 2: Temperature Rise Current (Typ.):The actual current when temperature of coil becomes T=40 (Ta=20) About CMCM104, DCEP125ME This specification might be changed without notice due to under developing and improving. Thank you for your understanding. 4 TemperatureRiseCurrent(typ)(A) POWER INDUCTORS POWER INDUCTORS Inductors for Low Profile OUTLINE This is low profile type of power inductor for portable equipment. It is suitable for a DC/DC converter power supply with height restrictions. K DIMENSIONS(mm) 2.4 1.35 0.2 CDH2D09/S CDH2D09 K LANDPATTERNS(mm) 1.0MAX. 2.35 0.5 2.8 K DIMENSIONS(mm) 3.6 1.1 3.0 1.0 1.2MAX. 2.7 0.8 K LANDPATTERNS(mm) 2.7 CDH3D11/S CDH3D11 0.7 1.15 CDSH3D11/S CDSH3D11 K DIMENSIONS(mm) 0.5 1.55 K LANDPATTERNS(mm) 1.2MAX. 3.4 1.2 0.7 2.4 0.4 1.2 2.0 1.1 1.4 3.4 2.2 3.5 1.1 K SPECIFICATIONS PartNo. Inductance D.C.R.() Max.(Typ.) SaturationRatedCurrent(A) (at20) TemperatureRiseCurrent(typ)(A) 4 CDH2D09/S, CDH2D09 4.7H 456m (380m) 380m1 630m CDH3D11/S, CDH3D11 4.7H 504m (420m) 850m2 560m CDSH3D11/S, CDSH3D11 4.7H 219m (175m) 660m3 840m 1: Saturation Rated Current:The current when the inductance becomes 25% lower than its nominal value. 2: Saturation Rated Current:The current when the inductance becomes 10% lower than its initial value. 3: Saturation Rated Current:The current when the inductance becomes 35% lower than its nominal value. 4: Temperature Rise Current (Typ.):The actual current when temperature of coil becomes T=40 (Ta=20) About CDH2D09/S CDH2D09, CDH3D11/S CDH3D11, CDSH3D11/S CDSH3D11 This specification might be changed without notice due to under developing and improving. Thank you for your understanding. 5 POWER INDUCTORS POWER INDUCTORS Inductors Corresponding High Temperature OUTLINE The operating temperature range is a maximum of 125 degree, and the inductance range is 10470uH. It matches as power inductor for DC/DC converters corresponding high temperature. K DIMENSIONS(mm) K LANDPATTERNS(mm) 8.9 5.9 2.3 4.0MAX. 8.0 2.3 8 5. 1. 8 1 9. 8.0 8.9 CDRH8D38/A Solder Resist 3.0 7.0 CDRH127C/A K DIMENSIONS(mm) K LANDPATTERNS(mm) 4 1. 17 .5 10 0 3. 45 . AX M .2 .8 18 10 .0 8.0MAX. 12.5 12.5 4 1. 0 4. K InductanceRange CDRH8D38/A : 10H-100H CDRH127C/A : 10H-470H K Characteristics CDRH8D38/A Saturation Current Temperature Rise 70 1,000 60 Delta T ( c) Ls ( uH ) 50 100H 100 33H 10H 10 10H 40 33H 100H 30 20 10 1 0 0.0 0.5 1.0 1.5 Idc (A) 2.0 2.5 3.0 0 0.5 1 1.5 2 Idc (A) 2.5 3 3.5 4 CDRH127C/A Temperature Rise Saturation Current 100 1,000 90 80 Delta T ( c) Ls ( uH ) 100 100H 33H 10H 10 33H 70 100H 60 10H 50 40 30 20 10 1 0 1 2 3 4 5 6 Idc (A) 7 8 9 10 0 0 1 2 3 4 5 6 Idc (A) About CDRH8D38/A This specification might be changed without notice due to under developing and improving. Thank you for your understanding. 6 7 8 9 10 POWER INDUCTORS POWER INDUCTORS Hybrid Power Inductors OUTLINE The combination of the Mn ferrite core and the Ni ferrite core achieves the large current and the smaller volume approximately 18% as compared to previous type. The series has the foot print lineup of 6 mm, 7 mm, and 10 mm square, so the lineup matches power supplies for potable PCs, DVCs, DSCs, LCD-TVs, and low profile type on-board power supplies. K DIMENSIONS(mm) K LANDPATTERNS(mm) 0.9 0 1. 2.5MAX. 6.5 0 4. 3. 1. 0 7 CDR6D23MN 6.5 R2.7 2. 5 3. 5 2. 5 C1.0 R2.4 K DIMENSIONS(mm) 0.9 0 4. 0 1. 3.0MAX. 6.5 K LANDPATTERNS(mm) 3. 1. 0 7 CDR6D28MN 6.5 R2.7 5 3. 5 2. 5 C1.0 CDR7D28MN K DIMENSIONS(mm) K LANDPATTERNS(mm) 5 1. 7 0 3. 4. 3.0MAX. 3 1. 1.3 7.3 2. R2.4 R3.0 2. 7 4. 2 7.3 C1.1 2. 7 R2.75 K DIMENSIONS(mm) 5 1.3 1. 7 0 4. 3. 3 4.5MAX. K LANDPATTERNS(mm) 1. 7.3 R3.0 2 2. 7 C1.1 R2.75 4. 7.3 CDR7D43MN 7 POWER INDUCTORS POWER INDUCTORS Hybrid Power Inductors K DIMENSIONS(mm) CDR10D48MN K LANDPATTERNS(mm) C1.4 0 6. 1.7 4. 2. 5 1 9 1. 5.0MAX. 10.0 R3.7 K InductanceRange CDR6D23MN : 2.0H - 100H CDR6D28MN : 1.5H - 120H CDR7D28MN : 1.2H - 470H CDR7D43MN : 3.7H - 100H CDR10D48MN : 2.4H - 120H Mesurement frequency of inductance : at 100kHz Saturation Current 12.0 CDR7D28MN Hybrid Power Inductor Inductance: L(uH) 10.0 CDRH8D28 8.0 Previous Type 6.0 4.0 2.0 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 D.C. Current: I(A) About CDR10D48MN This specification might be changed without notice due to under developing and improving. Thank you for your understanding. 8 3. 5 6. 0 3. 5 10.0 R4.1 POWER INDUCTORS POWER INDUCTORS Double Flat Winding Inductors OUTLINE It is suitable for the power inductor for chopper circuit of DC/DC converters for the power supply of portable equipment. Having adopted double flat winding technology, it is a product which corresponds to a low profile power supply model with lower DCR demand for DVC.e.t.c. 4.0 1 1. K DIMENSIONS(mm) K LANDPATTERNS(mm) 8 2 7M 1. 0 4 8. 1. 6. 1.8MAX. 4. 5.5MAX. AX . CDRH5D16F/LD 0 5. 8 2. 1 1. 4.0 1.8MAX. K LANDPATTERNS(mm) 1. 4 K DIMENSIONS(mm) 5. 2M 4. AX 3. 4 . 1 CDRH4D16FB 5.5MAX. 2.0MAX. K LANDPATTERNS(mm) 7 7. 5 3. 5.2MAX. 4 1. 5. 9M 5. AX . 3. 0 6 K DIMENSIONS(mm) 5.2MAX. 8 3. 1 2. CDPH4D19F 1 1. 8 2. K LANDPATTERNS(mm) AX . K DIMENSIONS(mm) 2.8MAX. 6.6 7.3 7.3 2.0 6.6 2.0 K LANDPATTERNS(mm) K DIMENSIONS(mm) 11.0 4.5MAX. 10.0 6.2 1.7 6.0 5.0 5.0 10.0 CDRH10D43F o5 .4 7.0MAX. 9. 5 7.0MAX. M CDRH6D26FB 9 POWER INDUCTORS POWER INDUCTORS Double Flat Winding Inductors K InductanceRange CDRH4D16FB : 4.7H - 33H CDRH5D16F/LD : 2.2H - 47H CDPH4D19F : 3.3H - 47H CDRH6D26FB : 2.2H - 22H CDRH10D43F : 4.7H - 33H K CDRH4D16FB:SaturationCurrent K CDRH5D16F/LD:SaturationCurrent 12.0 12.0 10.0 10.0 10H Inductance:L(H) Inductance:L(H) 10H 8.0 6.0 4.7H 4.0 6.0 4.7H 4.0 2.0 2.0 0.0 0.0 8.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.0 0.0 1.8 0.2 0.4 K CDPH4D19F:SaturationCurrent 1.2 1.4 1.6 1.8 12.0 14.0 16.0 10.0 8.0 Inductance:L(H) 10H 6.0 4.7H 4.0 10H 8.0 6.0 4.7H 4.0 2.0 2.0 0.2 0.4 0.6 0.8 1.0 1.2 D.C.Current:I(A) 1.4 1.6 1.8 0.0 0.0 2.0 4.0 6.0 8.0 10.0 D.C.Current:I(A) About CDRH4D16FB, CDRH10D43F This specification might be changed without notice due to under developing and improving. Thank you for your understanding. 10 1.0 12.0 10.0 Inductance:L(H) 0.8 K CDRH10D43F:SaturationCurrent 12.0 0.0 0.0 0.6 D.C.Current:I(A) D.C.Current:I(A) POWER INDUCTORS POWER INDUCTORS L.P.F Coils for Digital AMP OUTLINE It is the inductor for LPF used in the digital amplifier featuring with higher efficiency and lower heat generation. It is a product which corresponds to the demand of SMD type and smaller foot print (two in one type LPF) for 1 speaker. Applications are car audios, 5.1ch home theater sets and large LCDs. CDEPI106 K DIMENSIONS(mm) 11.0 K LANDPATTERNS(mm) 7.2 1.8 2.6 2.5 6.8 3.4 3.7 11.0 2.2 10.5MAX. K SPECIFICATIONS PartNo. Stamp D.C.R.(m) Max.(Typ)2 (1-2),(4-3) InductanceWITHIN1 (1-2),(4-3) SaturationRatedCurrent(A) TemperatureRiseRatedCurrent(A) 3 4 (at 20C) (at 105C) CDEPI106NP-100 100 10H25% 28.8(23) 4.9 4.5 4.0 CDEPI106NP-150 150 15H25% 28.8(23) 3.5 3.0 4.0 CDEPI106NP-220 220 22H30% 28.8(23) 2.2 1.9 4.0 1: Mesurement frequency of inductance : at 100kHz 2: is typical value. 3: Saturation Rated Current : It indicates the D.C. current value when inductance value become more than 75% of the nominal one. 4: The Temperature Rise Rated Current : The value of D.C. current when temperature rise is t=40C (Ta=20C). DEPI1615 K DIMENSIONS(mm) 14.20.3 10.40.2 3.2 0.7 7.40.2 2.8 16.90.3 18.10.3 4.0 0.6 K SPECIFICATIONS PartNo. Stamp InductanceWITHIN 1 D.C.R.(m) 2 (1-2),(4-3) (1-2),(4-3) SaturationRatedCurrent(A) TemperatureRiseRatedCurrent(A) 3 4 (at 20C) (at 105C) DEPI1615-100 100 10H20% 14.8 (12.3) 9.6 7.6 8.5 DEPI1615-150 150 15H20% 20.6 (17.2) 8.4 6.5 6.0 DEPI1615-220 220 22H20% 29.0 (24.2) 6.8 5.3 4.3 1: Mesurement frequency of inductance : at 100kHz 2: is typical value. 3: Saturation Rated Current : It indicates the D.C. current value when inductance value become more than 75% of the nominal one. 4: The Temperature Rise Rated Current : The value of D.C. current when temperature rise is t=40C (Ta=20C). About DEPI1615 This specification might be changed without notice due to under developing and improving. Thank you for your understanding. 11 POWER INDUCTORS TYPE DIMENSIONS mm 6.3MAX. 3.5 0.8MAX. 6.3MAX. 3.5 4.1 0.4 4.4MAX. 3.5 3.7 2.9 Inductance : 2.2H - 47H D.C.R. : 116m - 2.84 Rated Current : 180mA - 950mA 3.2 4.3 5.8MAX. 0.5 1.2MAX. 4.4MAX. 3.5 3.7 2.9 1.45MAX. 5.8MAX. 5.2 CMD5D13 0.6 4.5 5.8MAX. 0.6 4.5 7.4MAX. 6.8 1 MAX 2.0 5.20.2 0.05+0.10 -0.05 0.80.2 8 0. 2 2 0. 8 12 Inductance : 4.7H - 150H D.C.R. : 100m - 3.1 Saturation Rated Current : 210mA - 1.3A Temperature Rise Rated Current : 180mA - 1.4A 0.80.2 4.0 6.8 7.8MAX. 4 4. CDC4D20 2 Inductance : 3.3H - 47H D.C.R. : 81m - 875m Saturation Rated Current : 550mA - 1.9A Temperature Rise Rated Current : 350mA - 1.25A 6.8 5.5 1.0 1.2MAX. 3 Inductance : 3.3H - 100H D.C.R. : 109m - 2.8 Saturation Rated Current : 200mA - 940mA Temperature Rise Rated Current : 200mA - 1.16A 5.5 4.2 1.5MAX. 6.0 CMD6D11B 5.5 4.2 1.2MAX. 6.0 7.4MAX. CMD5D11 Inductance : 3.3H - 150H D.C.R. : 160m - 5.36 Saturation Rated Current : 180mA - 1.2A Temperature Rise Rated Current : 130mA - 850mA 3.2 4.3 5.8MAX. 0.5 CMD4D13 Inductance : 3.3H - 100H D.C.R. : 160m - 3.3 Saturation Rated Current : 210mA - 1.2A Temperature Rise Rated Current : 170mA - 850mA 3.2 5.8MAX. 4.3 CMD4D11 Inductance : 2.2H - 47H D.C.R. : 116m - 2.84 Rated Current : 180mA - 950mA 3.2 1.0MAX. SPECIFICATIONS 4.1 0.5 5.8MAX. 4.3 CMD4D08 0.4 CONSTRUCTION 0.5 CMD4D06 4. POWER INDUCTORS POWER INDUCTORS 1.00.1 Inductance : 100H - 4.7mH D.C.R. : 1.77 - 72.1 Rated Current : 35mA - 230mA POWER INDUCTORS POWER INDUCTORS CONSTRUCTION SPECIFICATIONS 2.5MAX. 2.2 6.0MAX. 1.2 6.0MAX. CDC5D23 DIMENSIONSmm POWER INDUCTORS TYPE Inductance : 2.2H - 270H D.C.R. : 39m - 2.73 Rated Current : 190mA - 2.16A 0.8 4.1MAX. 3.0MAX. 3.1 2.0 4.3MAX. 3.5MAX. 3.4 1.2MAX. 6.5 Inductance : 1.0H - 68H D.C.R. : 48.7m - 1.12 Rated Current : 370mA - 2.56A 4.2 0.9 2.0 Inductance : 1.0H - 33H D.C.R. : 40m - 784m Saturation Rated Current : 400mA - 2.2A Temperature Rise Current (Typ) : 450mA - 2.8A 0.8 1.2 5.3 6.0 CR5D11 2.1 4.8MAX. CR43 Inductance : 10H - 390H D.C.R. : 230m - 7.8 Rated Current : 115mA - 760mA 2.3 3.8MAX. CR32 0.5 4.85MAX. 4.7 7.3MAX. 10.4MAX. 2.5 5.8 4.7 (2.4) 4.3 7.8 4.0MAX. 10.4MAX. CR10D37 Inductance : 2.2H - 220H D.C.R. : 23.4m - 1.57 Rated Current : 350mA - 3.84A (1.4) 5.5MAX. 8.1MAX. CR75 Inductance : 1.2H - 470H D.C.R. : 15.6m - 1.96 Rated Current : 340mA - 6.0A 7.6 6.0 5.6MAX. 6.1MAX. CR54 Inductance : 2.7H - 680H D.C.R. : 34.5m - 2.55 Saturation Rated Current : 350mA - 5.7A Temperature Rise Rated Current : 330mA - 2.65A 13 POWER INDUCTORS TYPE CONSTRUCTION 5.8MAX. 9.5MAX. 5.9 3.0 0 1. 0. 7 3.0 1.2MAX. 0 1. o2 3.0 Inductance : 1.2H - 10H D.C.R. : 97.5m - 537.5m Saturation Rated Current : 280mA - 800mA Temperature Rise Current (Typ) : 420mA - 1.24A Inductance : 1.5H - 10H D.C.R. : 68m - 400m Saturation Rated Current : 350mA - 900mA Temperature Rise Current (Typ) : 650mA - 1.48A .1 3.0 4. 5M 3. AX 3 . CDRH2D11 Inductance : 1.8H - 820H D.C.R. : 13.0m - 2.55 Rated Current : 240mA - 6.0A 1.0MAX. 3 o2 .3 .1 CDRH2D09 SPECIFICATIONS 7.6 10.4MAX. CR105 DIMENSIONSmm CDRH2D11/HP 3. 3 5M 4. o2 .1 3.2MAX. AX 5M 3 4. o2 .1 3.0 3. 0 AX . 2.0MAX. 3. 3 4. 5 2. 3 3. 4. 5M AX . 2.0MAX. 1 2. 2M 3.8 4. 5. 1 1. AX . 1.2MAX. 4 3.8 4M 1. . AX 14 Inductance : 1.7H - 15H D.C.R. : 44m - 345m Saturation Rated Current : 700mA - 1.85A Temperature Rise Current (Typ) : 640mA - 2.2A 1 3.2MAX. 3.2MAX. 0 CDRH3D11 Inductance : 2.2H - 47H D.C.R. : 41m - 660m Saturation Rated Current : 200mA - 850mA Temperature Rise Current (Typ) : 480mA - 2.3A 1. M 3.2MAX. 0 1. CDRH2D18/HP Inductance : 1.5H - 12H D.C.R. : 63m - 394m Saturation Rated Current : 620mA - 1.8A Temperature Rise Current (Typ) : 640mA - 2.0A 1. CDRH2D18/LD Inductance : 1.5H - 10H D.C.R. : 80m - 559m Saturation Rated Current : 520mA - 1.35A Temperature Rise Current (Typ) : 520mA - 1.6A . 1.55MAX. 3.0 1 CDRH2D14 1. AX . 1.2MAX. 3.2MAX. 3.2MAX. POWER INDUCTORS POWER INDUCTORS Inductance : 2.7H - 39H D.C.R. : 84.5m - 1.02 Saturation Rated Current : 140mA - 530mA Temperature Rise Current (Typ) : 400mA - 1.82A POWER INDUCTORS POWER INDUCTORS CONSTRUCTION 5. 2M 4. A 4 X. 1 1. Inductance : 1.5H - 22H D.C.R. : 76m - 830m Saturation Rated Current : 650mA - 2.6A Temperature Rise Current (Typ) : 480mA - 1.85A . 2. 8 AX 4M 1. CDRH3D16 SPECIFICATIONS 1.5MAX. 4.0MAX. 4.0MAX. CDRH3D14/HP DIMENSIONS mm 4.0MAX. . 1.8MAX. 1 1. AX 4. 4 2M Inductance : 1.5H - 33H D.C.R. : 52m - 675m Rated Current : 320mA - 1.55A 4.0MAX. 5. 1. 4M AX . CDRH3D16/LD 4.0MAX. . 1.8MAX. 1 1. AX M .2 4. 4 Inductance : 3.3H - 47H D.C.R. : 66m - 775m Saturation Rated Current : 210mA - 800mA Temperature Rise Current (Typ) : 450mA - 2.0A 4.0MAX. 5 1. 4M AX AX 1 .8 Inductance : 1.7H - 33H D.C.R. : 51m - 870m Saturation Rated Current : 460mA - 2.0A Temperature Rise Current (Typ) : 410mA - 2.4A 1. .8 Inductance : 3.3H - 47H D.C.R. : 72.1m - 599m Saturation Rated Current : 480mA - 2.0A Temperature Rise Current (Typ) : 560mA - 1.85A o2 4.0MAX. 4. 4 1. 2M 1.8MAX. 4.0MAX. 5. CDRH3D16/HP . . . AX 4M 1. CDRH3D28 3.0MAX. 4.0MAX. 3.0MAX. 4.0MAX. 4. 1 1. 4 CDRH3D28/LD o2 4.0MAX. 4. 1 4 4.0MAX. 1.0MAX. 4.6 4.6 0 1. 5 3. .4 3 CLS4D09 Inductance : 4.7H - 22H D.C.R. : 185m - 910m Saturation Rated Current : 350mA - 800mA Temperature Rise Rated Current : 300mA - 750mA 1.2MAX. 0 1. 5 3. .4 3 4.6 4.6 CLS4D11 Inductance : 10H - 220H D.C.R. : 95m - 1.27 Saturation Rated Current : 116mA - 500mA Temperature Rise Current (Typ) : 360mA - 1.52A Inductance : 3.3H - 33H D.C.R. : 120m - 1.1 Rated Current : 300mA - 1.0A 15 POWER INDUCTORS TYPE POWER INDUCTORS TYPE DIMENSIONSmm CLS4D14 CONSTRUCTION 2 4 1 5. 3. 4 3 3 4.6 Inductance : 4.7H - 47H D.C.R. : 110m - 830m Saturation Rated Current : 300mA - 900mA Temperature Rise Rated Current : 330mA - 1.0A 1.5MAX 4.8MAX 5 3. .2 3 CDRH4D14/HP SPECIFICATIONS 1.5MAX. 4.6 0 1. 4.8MAX Inductance : 4.7H - 10H D.C.R. : 140m - 280m Saturation Rated Current : 950mA - 1.4A Temperature Rise Rared Current : 750mA - 1.1A 4.5 1.5 Inductance : 1.0H - 180H D.C.R. : 45m - 4.0 Rated Current : 140mA - 1.72A 4 1. 6. 2M 4. AX 4 . 2.0MAX. 5.1MAX. 4.5 CDRH4D18C/LD 2.0MAX. 4 1. 5.1MAX. 5.1MAX. 6. 2M 4. AX 4 . 5.1MAX. CDRH4D18C 6. 9M AX 2.0MAX. 5.0MAX. 5.0MAX. . 2 1. CDRH4D18 4.5 AX 4.5 6. 9M 3.0MAX. 5.0MAX. 5 6 4. .5 5 1.2MAX. 5.85 1. 16 Inductance : 1.2H - 180H D.C.R. : 23.6m - 1.54 Rated Current : 220mA - 2.56A 4.5 1.5 5.0MAX. CLS5D11 Inductance : 1.1H - 100H D.C.R. : 24m - 962m Saturation Rated Current : 200mA - 2.1A Temperature Rise Rared Current : 350mA - 3.5A . 4.5 1.5 5.0MAX. CDRH4D28 Inductance : 1.1H - 100H D.C.R. : 29m - 1.51 Rated Current : 250mA - 2.4A Inductance : 1.5H - 150H D.C.R. : 18.3m - 1.35 Saturation Rated Current : 210mA - 2.0A Temperature Rise Current (Typ) : 470mA - 4.2A 6. 9M 2.4MAX. 5.0MAX. AX . CDRH4D22 5.85 POWER INDUCTORS POWER INDUCTORS Inductance : 4.7H - 47H D.C.R. : 120m - 930m Saturation Rated Current : 380mA - 1.1A Temperature Rise Rated Current : 350mA - 1.1A POWER INDUCTORS POWER INDUCTORS 2.0 5.5 Inductance : 4.1H - 100H D.C.R. : 57m - 1.2 Rated Current : 360mA - 1.95A Inductance : 2.5H - 100H D.C.R. : 18m - 520m Rated Current : 420mA - 2.6A o4 .6 5.5 6.2MAX. 3.0MAX. AX 2M 8. CDRH5D28R SPECIFICATIONS 5.5 o4 .6 . 8. 2M AX 3.0MAX. 6.0MAX. 6.0MAX. CDRH5D28 CONSTRUCTION 2.0 5.5 8. 2M AX . 2.0MAX. 6.0MAX. 6.0MAX. CDRH5D18 DIMENSIONSmm POWER INDUCTORS TYPE 2.0 0.6 4.7 6.3MAX. . Inductance : 2.5H - 100H D.C.R. : 17.6m - 520m Rated Current : 400mA - 2.6A 8 2. 6. 0 0 1.5MAX. 6.7MAX. Inductance : 1.0H - 68H D.C.R. : 37.5m - 920m Saturation Rated Current : 450mA - 3.5A Temperature Rise Current (Typ) : 400mA - 2.8A (0.83) 7.6MAX. 5.93 (0.83) Inductance : 2.2H - 330H D.C.R. : 81m - 7.15 Rated Current : 70mA - 1.36A (0.83) 7.6MAX. 5.93 (0.83) 6.7MAX. 5. CDRH6D12 CLQ61 2.0MAX. 1.25 0.55 CLQ61B 0.5 1.5 5.1MAX. 5.7MAX. 2.0MAX. 1.25 0.55 6.5 6.5 2.0 6.5 Inductance : 3.0H - 100H D.C.R. : 24m - 535m Rated Current : 540mA - 3.0A 2.0 o5 . AX 6.5 o5 .4 9. 5M 3.0MAX. 7.0MAX. 7.0MAX. CDRH6D28 Inductance : 2.2H - 100H D.C.R. : 22m - 560m Rated Current : 500mA - 3.2A .4 7.0MAX. 9. 5 M 2.8MAX. AX . CDRH6D26 7.0MAX. Inductance : 2.2H - 330H D.C.R. : 81m - 7.15 Rated Current : 70mA - 1.36A 0.5 1.5 5.1MAX. 5.7MAX. 17 POWER INDUCTORS DIMENSIONS mm CDRH6D38 4.0MAX. 3.0MAX. 8.3MAX. 2.0 6.5 6.3 2.5 4.0MAX. 8.3MAX. 6.3 2.5 4.5MAX. 8.3MAX. 6.3 2.5 6.3 6.0MAX. 8.0 2.5 3.1MAX. 10.3MAX. 3.0 . AX 5M Inductance : 0.8H - 150H D.C.R. : 5.7m - 871m Saturation Rated Current : 840mA - 11.2A Temperature Rise Rated Current : 510mA - 8.3A 1.2 7.7 10.5MAX. Inductance : 2.8H - 100H D.C.R. : 15m - 175m Saturation Rated Current : 800mA - 4.7A Temperature Rise Current (Typ) : 1.4A - 6.9A . 13 CDRH103R Inductance : 1.2H - 68H D.C.R. : 16.5m - 363m Saturation Rated Current : 1.6A - 12.6A Temperature Rise Current (Typ) : 800mA - 5.6A 1.2 6.3 8.0 CDRH8D58/LD Inductance : 2.0H - 100H D.C.R. : 14m - 360m Saturation Rated Current : 1.3A - 7.0A Temperature Rise Rated Current : 800mA - 5.5A 1.2 2.5 4.7MAX. 8.0 Inductance : 1.8H - 100H D.C.R. : 15.6m - 410m Saturation Rated Current : 1.05A - 7.0A Temperature Rise Current (Typ) : 880mA - 6.8A 1.2 8.0 CDRH8D43/HP Inductance : 2.5H - 100H D.C.R. : 15.6m - 430m Saturation Rated Current : 750mA - 4.5A Temperature Rise Current (Typ) : 800mA - 6.4A 1.2 8.3MAX. CDRH8D43 Inductance : 3.3H - 100H D.C.R. : 20m - 358m Rated Current : 650mA - 3.5A 1.2 8.3MAX. CDRH8D38 SPECIFICATIONS 6.5 8.3MAX. CDRH8D28 CONSTRUCTION o5 .4 7.0MAX. 7.0MAX. 9. 5M AX . TYPE 4.0MAX. 3.0 1.2 7.7 . AX 5M 10.3MAX. . 13 CDRH104R 10.5MAX. POWER INDUCTORS POWER INDUCTORS 18 Inductance : 1.5H - 330H D.C.R. : 8.1m - 1.09 Saturation Rated Current : 700mA - 10.0A Temperature Rise Rated Current : 520mA - 6.5A POWER INDUCTORS POWER INDUCTORS 5.1MAX. 3.0 AX M .5 10.3MAX. CONSTRUCTION SPECIFICATIONS 13 CDRH105R DIMENSIONS mm 1.2 7.7 10.5MAX. . Inductance : 0.8H - 1.0mH D.C.R. : 4.3m - 2.0 Saturation Rated Current : 420mA - 9.5A Temperature Rise Rated Current : 480mA - 13.5A 5.0 0.2 6.0MAX. 12.3MAX. 8.0MAX. 8.0MAX. 12.3MAX. 5.0MAX. 1.8 4.0 3.3MAX. 5.0MAX. Inductance : 100H D.C.R. : Max 0.9m Saturation Rated Current : 24.0A Temperature Rise Current (Typ) : 22.5A 1.8 3.0MAX. 4.0 Inductance : 80nH - 120nH D.C.R. : Max. 1.7m Rated Current : 15.0A 5.6MAX. 2.9 3.8 Inductance : 0.15H - 8.8H D.C.R. : 1.7m - 23.8m Saturation Rated Current : 4.8A - 55.0A Temperature Rise Current (Typ) : 4.9A - 19.0A 2.6 5.5 1.4 2.6 10.4MAX. 10.4MAX. CDEP105 Inductance : 1.0H - 1.0mH D.C.R. : 6.5m - 1.50 Rated Current : 700mA - 14.0A 5.0 8.0MAX. CDBM7D28 Inductance : 1.2H - 1.0mH D.C.R. : 7.0m - 1.82 Rated Current : 550mA - 9.8A 8.5MAX. CDBM73MN 7.6 12.0 5.0 7.6 12.0 12.3MAX. 12.3MAX. CDRH127/LD Inductance : 1.3H - 1.0mH D.C.R. : 12m - 1.53 Rated Current : 400mA - 8.0A 5.0 12.3MAX. CDRH127 Inductance : 3.9H - 330H D.C.R. : 15m - 990m Rated Current : 500mA - 6.5A 0.2 12.3MAX. CDRH125 7.6 11.8 4.5MAX. 7.6 11.8 12.3MAX. 12.3MAX. CDRH124 19 POWER INDUCTORS TYPE POWER INDUCTORS TYPE DIMENSIONS mm CEI122(H) CONSTRUCTION 1.6 9.8 12.8MAX. 1.6 CEP123 3.5MAX. 12.8MAX. 2.5 7.0 2.6 2.6 2.6 7.2 13.9MAX. 2.5 Inductance : 0.56H - 6.1H D.C.R. : 1.7m - 10.8m Saturation Rated Current : 10.4A - 36.0A Temperature Rise Current (Typ) : 9.5A - 23.0A 2.6 9.0 14.9MAX. Inductance : 0.3H - 8.0H D.C.R. : 1.9m - 18.4m Saturation Rated Current : 7.2A - 35.0A Temperature Rise Current (Typ) : 6.5A - 18.5A 10.2 2.6 6.0MAX. Inductance : 0.35H - 10.0H D.C.R. : 1.5m - 13.5m Saturation Rated Current : 5.0A - 35.0A Temperature Rise Current (Typ) : 7.6A - 19.5A 9.6 4.9MAX. 14.9MAX. CDEP145 4.2 2.6 4.0 2.5 13.9MAX. Inductance : 1.2H - 8.0H D.C.R. : 5.83m - 23.0m Rated Current : 4.0A - 10.0A 10.6 5.6MAX. 12.9MAX. CDEP134(H) 1.60 8.9 12.8MAX. 12.9MAX. Inductance : 0.7H - 22H D.C.R. : 10.7m - 85.0m Saturation Rated Current : 2.3A - 17.0A Temperature Rise Current (Typ) : 2.3A - 6.6A 9.2 1.70 CEP125(H,U) SPECIFICATIONS 3.0MAX. 12.8MAX. Max.8.0 20 2.10.2 9.0 2.60.2 10.0MAX. 2.0 2.0 10.6 9.0 0.15 Inductance : 0.7H - 9.5H D.C.R. : 1.86m - 11.23m Saturation Rated Current : 11.2A - 36.0A Temperature Rise Current (Typ) : 8.5A - 21.0A 2.0 4.9 4.3 15.2MAX. 14.6 15.2MAX. CDEP149(H) 10.5 2.60.2 14.50.4 2.4 CDEP147 14.50.4 POWER INDUCTORS POWER INDUCTORS Inductance : 0.45H - 3.0H D.C.R. : 1.1m - 2.3m Saturation Rated Current : 12.4A - 32.0A Temperature Rise Current (Typ) : 28.0A - 35.0A POWER INDUCTORS POWER INDUCTORS 5.0MAX. 4.0 4.0 o6.5MAX. CONSTRUCTION o0.5 RCH-654 DIMENSIONS mm 6.5MAX. 4.0 4.0 o6.5MAX. o0.5 RCH-664 o6.5MAX. 6.5MAX. 4.0 o8.3MAX. 5.0 7.5MAX. 5.0 5.0 o8.3MAX. o0.7 RCH-875 Inductance : 1.0H - 1.0mH D.C.R. : 29m - 7.06 Rated Current : 130mA - 3.0A Inductance : 1.0H - 1.0mH D.C.R. : 18.3m - 4.45 Rated Current : 190mA - 4.0A Inductance : 2.7H - 1.0mH D.C.R. : 42m - 5.56 Rated Current : 140mA - 2.42A 5.5MAX. 5.0 o0.7 RCH-855 SPECIFICATIONS 4.0 o0.5 RCR-664D POWER INDUCTORS TYPE Inductance : 2.5H - 10mH D.C.R. : 23m - 55.7 Saturation Rated Current : 81mA - 4.5A Temperature Rise Rated Current : 37mA - 3.1A Inductance : 2.2H - 10mH D.C.R. : 13.7m - 33.0 Saturation Rated Current : 84mA - 5.8A Temperature Rise Rated Current : 54mA - 3.0A RCR-875D 7.5MAX. 5.0 5.0 o0.7 o8.3MAX. o8.3MAX. 9.5MAX. 5.0 5.0 o0.7 RCH-895 10.8MAX. Inductance : 2.5H - 47mH D.C.R. : 13.7m - 96.4 Saturation Rated Current : 38mA - 5.0A Temperature Rise Rated Current : 31mA - 3.2A o7.8 5.0 5.0 o8.3MAX. o0.7 RCH8011 Inductance : 1.2H - 10mH D.C.R. : 18m - 35.0 Rated Current : 74mA - 4.14A Inductance : 10H - 1.0mH D.C.R. : 35m - 1.92 Saturation Rated Current : 490mA - 4.4A Temperature Rise Current (Typ) : 470mA - 4.1A 21 POWER INDUCTORS TYPE o10.5MAX. CONSTRUCTION 5.0 8.5MAX. 3.5 o10.5MAX. 8.5MAX. 3.5 5.0 o10.5MAX. 10.5MAX. 5.0 4.0 o10.5MAX. 10.5MAX. 3.5 Inductance : 10H - 1.0mH D.C.R. : 22m - 1.7 Rated Current : 530mA - 5.3A 4.0 5.0 o0.7 RCR-110D Inductance : 1.0H - 1.0mH D.C.R. : 6.5m - 2.3 Rated Current : 280mA - 9.15A 3.5 o0.7 RCH-110 Inductance : 2,2H - 1.0mH D.C.R. : 8.5m - 2.1 Rated Current : 450mA - 7.9A 4.0 o0.7 RCR-108D Inductance : 1.0H - 1.0mH D.C.R. : 5.0m - 3.2 Rated Current : 360mA - 9.3A 4.0 5.0 o10.5MAX. o0.7 RCH-108 SPECIFICATIONS 4.0 6.5MAX. 3.5 o0.7 RCH-106 DIMENSIONS mm Inductance : 10H - 1.0mH D.C.R. : 23m - 1.5 Rated Current : 350mA - 3.51A 14.4MAX. 5.0 Inductance : 6.3H - 39mH D.C.R. : 26m - 58 Rated Current : 90mA - 4.3A 5.0 o10.5MAX. o0.7 RCH-114 15.0MAX. 5.0 7.5 o13.0MAX. o0.7 RP1315 o16.5MAX. 16.5MAX. 22 Inductance : 10H - 33H D.C.R. : 19m - 70m Saturation Rated Current : 4.5A - 8.1A Temperature Rise Rated Current : 2.3A - 4.5A 5.0 7.5 RCR1616 o0.8 POWER INDUCTORS POWER INDUCTORS Inductance : 4.7H - 1.0mH D.C.R. : 6.7m - 665m Saturation Rated Current : 850mA - 12.6A Temperature Rise Rated Current : 930mA - 9.2A FIXED INDUCTORS FIXED INDUCTORS 11.5MAX. SPECIFICATIONS 5.0 o0.7 o8.3MAX. 7.5MAX. CONSTRUCTION FIXED INDUCTORS RC-875 DIMENSIONS mm 5.0 TYPE Inductance : Max. 47mH Operating Freq. : Max. 1MHz Molded case type Excellent maximum allowable DC current characteristics 8.6MAX. 5.0 5.0 o7.3MAX. o0.5 RX-7P Inductance : Max. 6.8mH Operating Freq. : Max. 1MHz Magnetically shielded type 13.0MAX. 3.0 5.0 o8.5MAX. o0.7 RX-8P Inductance : Max. 33mH Operating Freq. : Max. 1MHz Magnetically shielded type 23 INVERTER TRANSFORMERS High Reliability Inverter Transformers OUTLINE CPUDL294 K DIMENSIONS(mm) K LANDPATTERNS(mm) 9.3 5.7MAX. 10 9 9.3 9.3 4.5 9.3 4-0.7 8 1.6 29.6 7-0.8 6-3.0 7 1.6 3.5 1 22.0 20.8 25.4 11 4.5 3.5 INVERTER TRANSFORMERS The leakage transformer has a special core that allows for co-axial winding. Suitable for large LCD panel, and complies to customer needs of high open voltage and high lamp wattage. Inverter transformer corresponding to multiple CCFL lamps driving for large LCD TV application It is possible to drive 2 CCFLs in 1 transformer. No ballast capacitor is required 6-3.0 CEIDL318 K LANDPATTERNS(mm) K DIMENSIONS(mm) 10.3 4.2 10.3 0.3 1 37.20.6 1.6 4-1.0 23.5 3.5 0.35 10 30.5 10.3 11 21.0 13 12 4.2 29.00.5 14 10.3 3.5 Max. 7.5 1.6 10-1.0 2.8 3.70.3 2.8 2.8 2.8 3.7 CEIDL377 K Dimensions(mm) K Recommendedlandpatterns(mm) 10.3 3.7 10.3 10.3 3.7 10.3 4-1.0 1.6 3.5 22.0 29.0 27.40.5 18.4 MAX. 9.0 3.5 1.0 0.35 3.2 1.6 28 31.20.6 2.8 2.8 3.2 K LANDPATTERNS(mm) b a a 4-3.0 14-0.8 b 8.3 4.2 4-3.0 a 11 a 13 12 a 5.7 a 8.3 a b a 24 a b 10 9.9 9.9 7.3 a=1.6 4.0 b=1.4 25.8 33.8 4.0 0.55 a 36.0 10.5MAX. 1 28.7 b a 2.6 29.8 a b a b 16.05 18.0 a 14.75 14 0.55 K DIMENSIONS(mm) b CEIDL369 a=1.6 INVERTER TRANSFORMERS High Reliability Inverter Transformers K DIMENSIONS(mm) 14 12 11 4-3.0 4-0.8 14.85 18.0 1 4.2 4-3.0 13.75 13 INVERTER TRANSFORMERS EIDL369 10 11.0MAX. 36.0 9.9 9.9 2.75 7.3 CHARACTERISTICS Unique shielding reduces noise emissions. Leakage transformer types are magnetically shielded. No ballast capacitor is required due to leakage structure of the transformer. High temperature reflow soldering is permitted. (Pb free) APPLICATION 1.LargeLCDTV 2.LCDmonitor K Schematic L Vin R Lamp Cover R Lamp Cover C Tr1 Tr2 C (P.P) IL1 IL2 IG IG GND Normal size panel (TV.Monitor) Large size panel (TV.Monitor) K Schematic Lamp Cover Vin Lamp Cover U1 DM GND U3 U2 IL1 IL2 IG IG OVP Normal size panel (TV.Monitor) FB Large size panel (TV.Monitor) K SPECIFICATIONS ProductType FrequencyRange Max.OpenVoltage Max.LampWattage CPUDL294 35kHz70kHz 1500Vrms 3W2 CEIDL318 35kHz65kHz 1500Vrms (1800Vrms, 3sec) 7.5W2 CEIDL377 35kHz65kHz 1500Vrms (1800Vrms, 3sec) 7.5W2 CEIDL369 40kHz65kHz 1600Vrms (2000Vrms, 3sec) 10W2 EIDL369 40kHz65kHz 1600Vrms (2000Vrms, 3sec) 10W2 About CPUDL294, CEIDL369, EIDL369 This specification might be changed without notice due to under developing and improving. Thank you for your understanding. 25 INVERTER TRANSFORMERS High Reliability Inverter Transformers OUTLINE INVERTER TRANSFORMERS Slim type Inverter transformer corresponding to multiple CCFL lamps driving for large LCD TV application Designed secondary winding for out put voltage check High efficiency suitable for IC controlled type circuit K DIMENSIONS(mm) 3.8 11.8MAX. 0.9 CIUH11D66 6.95MAX. 0.3 3.3 36.2 3.3 3-2.1 4.8 0.8 2.9 3-2.1 0.7 4.8 1.0 1.1 K LANDPATTERNS(mm) 38.2 40.8MAX. K SPECIFICATIONS FrequencyRange Max.OpenVoltage Max.LampWattage 26 50kHz300kHz 1600Vrms 8.0W INVERTER TRANSFORMERS INVERTER UNIT M OUTLINE IV120307 INVERTER TRANSFORMERS 1. Inverter unit for powering CCFL in 27" TV application 2.Line communication type circuitry 3.Polyphase circuitry DIMENSIONS (mm) NEW PWM IC Driver Tran s 120.0 Tran s 3-116.25 3.0 6- 3-3.75 Power Tran s Power up seqense r 150.05 125.0 PWM IC Driver Tran s PWM Clock Tran s 95.2 153.8 142.8 Tran s ON/OFF Tran s PWM IC 26.0 Clock sel. 24.0 21.5 Tran s Ext.clock Driver Tran s Analog Dim . 1.0 95.2 Tran s 6-7.5 150.05 Tran s 6-7.5 125.2 153.8 142.8 47.5 47.5 Burst controle r 8-5.0 Tran s PWM IC Driver Tran s Tran s 101.75 Ret. C. det . COMPONEMT SIDE MEASUREMENT CIRCUIT DIAGRAM K ELECTRICAL SPECIFICATIONS Parameter Symbol Specifications Condition Unit min. typ. max. Input Voltage Vin Vin=24.0V0.1V 21.6 24.0 26.4 V Input Current Iin Vin=24.0V0.1V - - 5.91 A Frequency Fosc Vin=24.0V0.1V 54.0 56.0 58.0 kHz LampCurrent(Current/aLamp) IL Vin=24.0V0.1V Duty Ratio=100% 4.4 4.7 5.0 mArms M FEATURES 1.Lead-free available 2.For light adjustment, both PWM and voltage methods are used. 3.Effective protection functionality:Excessive-voltage protection and lamp-open detection circuitry. 27 INVERTER TRANSFORMERS INVERTER TRANSFORMERS TYPE DIMENSIONS mm 13.8MAX. 0.5 4-1.5 0.5 6.0 2.8 10.2MAX. 10.8MAX. 15.2MAX. 7 Operating Freq. : Max. 140kHz Max. Open Voltage : 750Vrms Max. Lamp Wattage : 1.2W 8.0 4-2.0 0.6 0.6 CPU144C Operating Freq. : Max. 140kHz Max. Open Voltage : 750Vrms Max. Lamp Wattage : 1.5W 7.4 3.0MAX. 12.3MAX. CLQ122 SPECIFICATIONS 10.1 2.8MAX. 10.0 5.0MAX. 6 0.8 27.0MAX. 22.5MAX. Operating Freq. : Max. 100kHz Max. Open Voltage : 1,500Vrms Max. Lamp Wattage : 4W 1 5-0.8 5 4-2.5 CPU215 31.5MAX. 26.0MAX. 6.2MAX. 7 8 1 9 CPUL236 24.5MAX. 16.5 6-2.75 23.0MAX. 7.0MAX. Operating Freq. : Max. 80kHz Max. Open Voltage : 1,800Vrms Max. Lamp Wattage : 6W 6-2.75 1.0 26.5MAX. 32.0MAX. Operating Freq. : Max. 100kHz Max. Open Voltage : 1,500Vrms Max. Lamp Wattage : 7.5W 1.0 16.5 CPUDL328 8.5MAX. 8 10.9 5.0 10.9 4-1.0 Operating Freq. : Max. 65kHz Max. Open Voltage : 1,500Vrms Max. Lamp Wattage : 6W2 24.2 29.8MAX. 10 9 0.8 32.9MAX. 11 1 7-1.2 6-3.0 7 0.3 28 21.6 4.5 4-1.4 4.7MAX. 0.6 23.6MAX. 0.4 CIUH84 8.6MAX. INVERTER TRANSFORMERS CPU9D25 CONSTRUCTION Operating Freq. : Max. 300kHz Max. Open Voltage : 1,000Vrms Max. Lamp Wattage : 1.2W INVERTER TRANSFORMERS INVERTER TRANSFORMERS TYPE 14.7MAX. 5.75MAX. 6.1MAX. 17.0MAX. 4-2.5 Operating Freq. : Max. 300kHz Max. Open Voltage : 1,300Vrms Max. Lamp Wattage : 3.0W 23.3 0.8 CEPH209 Operating Freq. : Max. 300kHz Max. Open Voltage : 1,300Vrms Max. Lamp Wattage : 2.5W 16.2 5.5 2.75 26.0 27.8MAX. 1.0 33.0MAX. 30.0 INVERTER TRANSFORMERS 0.3 0.6 CEPH165 SPECIFICATIONS 12.6 5.0 2.5 18.3 (9.65) (10.45) 1.0 CONSTRUCTION 23.0MAX. CEPH145B DIMENSIONS mm 4-2.75 9.5MAX. 7.8 6.6 Operating Freq. : Max. 100kHz Max. Open Voltage : 2,000Vrms Max. Lamp Wattage : 10.0W 2.1 4-3.5 22.0MAX. 1.0 1.95 29.0 3-1.0 2.25 Operating Freq. : Max. 100kHz Max. Open Voltage : 2,000Vrms Max. Lamp Wattage : 15.0W 5.9 12.1 2.5 2.5 4-3.5 4-1.0 9.3MAX. 3-0.7 33.5MAX. 30.5 26.0MAX. CEPH249 CEPH115 CIU7D32 1.3 26.4 1.5 5.6 3.5 3.5MAX. 6.0 4-2.0 0.8 0.6 6.1MAX. 11.4MAX. 30.2MAX. 27.2 Operating Freq. : Max. 150kHz Max. Open Voltage : 1,300Vrms Max. Lamp Wattage : 3.0W 7.6MAX. 0.6 0.9 26 34 36.4MAX. Operating Freq. : Max. 100kHz Max. Open Voltage : 1,600Vrms Max. Lamp Wattage : 3.5W 1.8 0.5 35.9 5.2 0.5 4.8MAX. 3-1.7 37.8MAX. 8.0MAX. CIUH7D45 Operating Freq. : Max. 200kHz Max.open voltage : 1,600Vrms Max.lamp wattage : 4.0W 29 INVERTER TRANSFORMERS INVERTER TRANSFORMERS TYPE CONSTRUCTION 0.625 3.7MAX. 5.2 35.9 37.8MAX. 0.5 0.5 0.3 9.0MAX. 0.625 4.5MAX. 5.2 0.5 7.2MAX. 9.3MAX. 3-1.7 6.8 0.7 0.5 5-1.5 10.7MAX. 8.5MAX. 7.8 0.7 Operating Freq. : Max. 300kHz Max. Open Voltage : 1,800Vrms Max. Lamp Wattage : 6.0W 32.0 28.6 34.1MAX. CIU98 Operating Freq. : Max. 200kHz Max. Open Voltage : 1,500Vrms Max. Lamp Wattage : 3.0W 29.4 26.1 31.7MAX. CIU86 Operating Freq. : Max. 200kHz Max. Open Voltage : 1,600Vrms Max. Lamp Wattage : 3.5W 35.9 0.5 0.3 Operating Freq. : Max. 200kHz Max. Open Voltage : 1,600Vrms Max. Lamp Wattage : 3.5W 3-1.7 37.8MAX. CIUH8D42 SPECIFICATIONS 4.5MAX. 9.0MAX. INVERTER TRANSFORMERS CIUH8D34 DIMENSIONS mm 0.5 1.9 4-1.6 34.6MAX. 31.4 6.1MAX. 30 0.55 6.8 7.9 0.8 31.6 5-2.5 17.8MAX. CIOH175 Operating Freq. : Max. 150kHz Max. Open Voltage : 1,800Vrms Max. Lamp Wattage : 5.0W INVERTER TRANSFORMERS INVERTER TRANSFORMERS 8.0MAX. 3.0 16.0MAX. 4.0 Operating Freq. : Max. 300kHz Max. Open Voltage : 1,200Vrms Max. Lamp Wattage : 4.0W Operating Freq. : Max. 300kHz Max. Open Voltage : 1,600Vrms Max. Lamp Wattage : 4.0W 4-3.3 5-2.5 o0.5 3.0 35.0MAX. 25.5 14.0MAX. 3.5 o0.6 o15.5MAX. 10.4MAX. 30 45 o11.0 MC159 9.0MAX. 3.0 30 45 o11.0 o15.5MAX. Operating Freq. : Max. 100kHz Max. Open Voltage : 900Vrms Max. Lamp Wattage : 1.5W Operating Freq. : Max. 100kHz Max. Open Voltage : 900Vrms Max. Lamp Wattage : 2.5W o0.5 LC158 Operating Freq. : Max. 500kHz Max. Open Voltage : 2,200Vrms Max. Lamp Wattage : 15.0W 4.0 12.0 5-4.0 26.3MAX. 4.0 EEH2513 Operating Freq. : Max. 300kHz Max. Open Voltage : 900Vrms Max. Lamp Wattage : 1.7W o0.6 10.0MAX. 22.5MAX. 24.5MAX. EP208B 12.5 o0.5 4-2.5 15.0MAX. 17.0MAX. SPECIFICATIONS INVERTER TRANSFORMERS SEP-16 CONSTRUCTION 11.0 13.5MAX. 17.0MAX. EW-12H DIMENSIONS mm 15.5 TYPE 31 DC/DC CONVERTER TRANSFORMERS Transformer for UP-Down or Up Converter OUTLINE K DIMENSIONS(mm) K LANDPATTERNS(mm) 5.3 3.4 3 1 2.8 2 1.5 0.7 3 3.1 4.80.2 0.5 0.9 2.0 MAX.2.0 4.80.2 MAX,5.1 CLS4D18 0.7 DC/DC CONVERTER TRANSFORMERS This is small size and high efficient up-down converter transformer which is 2 in 1 construction. (ex. SEPIC converter) It is possible to output the high voltage which is hard to obtain with an ordinary inductor with sufficient accuracy. It is available for a white LED back light drive. K DIMENSIONS(mm) MAX,3.0 2.3 1.3 K DIMENSIONS(mm) K LANDPATTERNS(mm) 5.5 2.5 2.7 2.1 1.9 2.3 6.7 6.6 7.4 6.7 2.8 CLS6D28 1.8 2.1 4.75 MAX,6.5 5.00.2 4.80.2 K LANDPATTERNS(mm) 4.5 2.6 2.0 CLS4D28 K SEPIC CONVERTERSCHEMATIC Vin(2.5~6V) T1:CLS6D28 L1 Vo(3.3V) C1 L2 C2 C1C2:10Fceramiccapacitor K SEPIC CONVERTERCHARACTERISTIC v s.Io (V i n= 3V /Vo= 3.3V ) (%) 90 vs.Io (Vin=3V/Vo=3.3V ) (%) 90 SEPIC zeta flyback 80 80 70 70 60 60 50 50 40 0.0 0.2 0.4 0.6 0.8 1.0 Io (A) 40 0.0 0.2 About CLS4D18, CLS4D28 This specification might be changed without notice due to improving. Thank you for your understanding. 32 0.4 0.6 0.8 1.0 Io (A) DC/DC CONVERTER TRANSFORMERS DC/DC Converter Transformers OUTLINE CLQ5D27 K DIMENSIONS(mm) DC/DC CONVERTER TRANSFORMERS This is the transformer of multiple output type,which has size lineup. There are Max.3.0mm hightx5mm square and Max.2.5mm hightx7mm square. It is designed as a special structure to prevent wire breaking and solves the space reduction problem in the DSCs and DVCs. K LANDPATTERNS(mm) 4.5 0.55 0.4 6.1MAX. 4.0 (5.8) 3.0MAX. 3-1.0 6.4MAX. 5.6 1.0 1.0 1.0 NEW 1.4 Solder Resist Inordertopreventshort-circuiting,asolderresistisrecommended. K SPECIFICATIONS Max.Operatingfrequency Max.Operatingpower 1MHz 350mW@300kHz 580mW@500kHz 1.1W@1MHz CLQ7D23 K DIMENSIONS(mm) K LANDPATTERNS(mm) 5.5 0.7 1.27 1.27 8.0MAX. 0.4 6.0 7.9 2.5MAX. 1.27 9.8MAX. 7.7 3-1.27 NEW 2.5 Solder Resist Inordertopreventshort-circuiting,asolderresistisrecommended. K SPECIFICATIONS Max.Operatingfrequency Max.Operatingpower 1MHz 450mW@300kHz 700mW@500kHz 1.4W@1MHz About CLQ5D27 This specification might be changed without notice due to improving. Thank you for your understanding. 33 DC/DC CONVERTER TRANSFORMERS DC/DC COVERTER TRANSFORMERS TYPE 2.0MAX. 4.6MAX. SPECIFICATIONS 4.8 3.7 0.05 1.0 1.0 4.9MAX. NEW Inductance : Max.500H Operating Freq. : Max. 1MHz Max. Operating Power : 100mW (300kHz) 175mW (500kHz) 350mW (1MHz) 0.6 5.1MAX. 4.4 3.0MAX. 0.4 1.0 1.0 3.7 4.9MAX. CLQ4D27 Inductance : Max.500H Operating Freq. : Max. 1MHz Max. Operating Power : 160mW (300kHz) 270mW (500kHz) 540mW (1MHz) 0.6 CLQ5D16 6.0 4.3 1.8MAX. 5.6 1.0 5.6 0.4 1.0 NEW 6.4MAX. 5.6 2.5MAX. 3-1.0 4.5 6.1MAX. 0.4 CLQ52 7.0MAX. 2.5MAX. 6.1 0.4 6.1 3.0MAX. 6.0 3-1.27 9.8MAX. 7.7 9.8MAX. 7.7 4.0MAX. 6.0 3-1.27 CLQ7D37 0.4 34 Inductance : Max. 3.0mH Operating Freq. : Max. 1MHz Max. Operating Power : 240mW (300kHz) 400mW (500kHz) 800mW (1MHz) Inductance : Max. 4mH Operating Freq. : Max. 1MHz Max. Operating Power : 640mW (300kHz) 1.0W (500kHz) 2.0W (1MHz) 8.0MAX. 0.4 CLQ7D27 Inductance : Max. 2.0mH Operating Freq. : Max. 1MHz Max. Operating Power : 220mW (300kHz) 380mW (500kHz) 780mW (1MHz) 3-1.27 3.0MAX. 7.0MAX. Inductance : Max.800H Operating Freq. : Max. 1MHz Max. Operating Power : 290mW (300kHz) 480mW (500kHz) 930mW (1MHz) 3-1.27 6.7 7.9MAX. CLQ72 Inductance : Max.500H Operating Freq. : Max. 1MHz Max. Operating Power : 290mW (300kHz) 480mW (500kHz) 930mW (1MHz) 0.4 6.7 7.9MAX. CLQ72B 8.0MAX. DC/DC CONVERTER TRANSFORMERS CONSTRUCTION 0.4 CLQ4D18 DIMENSIONS mm Inductance : Max. 5.2mH Operating Freq. : Max. 1MHz Max. Operating Power : 1.0W (300kHz) 1.8W (500kHz) 3.0W (1MHz) DC/DC CONVERTER TRANSFORMERS DC/DC COVERTER TRANSFORMERS 11.3MAX. 9.6 0.6 5.0MAX. 9.6 11.3MAX. 0.6 9.2 3.0MAX. 10.9MAX. 0.5 10.7 3-2.0 11.9MAX. 10.9MAX. 4.5MAX. Inductance : Max. 4.3mH Operating Freq. : Max. 500kHz Max. Operating Power : 650mW (100kHz) 1.5W (300kHz) 2.2W (500kHz) Inductance : Max. 8.2mH Operating Freq. : Max. 500kHz Max. Operating Power : 600mW (100kHz) 1.4W (300kHz) 2.2W (500kHz) 3-2.0 7.5 Inductance : Max. 18.0mH Operating Freq. : Max. 500kHz Max. Operating Power : 800mW (100kHz) 2.0W (300kHz) 3.0W (500kHz) 6.0MAX. 12.2 11.3MAX. 8.2 0.5 3.9MAX. 11.3MAX. 8.2 4.5MAX. Inductance : Max. 40mH Operating Freq. : Max. 500kHz Max. Operating Power : 400mW (100kHz) 900mW (300kHz) 1.8W (500kHz) 9.2 0.6 8.0 10.0MAX. CEE94 Inductance : Max. 300mH Operating Freq. : Max. 500kHz Max. Operating Power : 700mW (100kHz) 1.6W (300kHz) 2.4W (500kHz) 9.2 0.6 8.0 10.0MAX. CEE93 7.6 3-1.75 0.6 6.2MAX. Inductance : 22mH Operating Freq. : Max. 500kHz Max. Operating Power : 1.2W (100kHz) 2.9W (300kHz) 4.3W (500kHz) 3-2.0 9.5MAX. 6.6 7.0 8.0MAX. CEE-78 3-2.0 14.5MAX. 12.0 12.0 13.9MAX. CLS-12 4-2.5 0.5 11.9MAX. CLQ104 Inductance : Max. 1mH Operating Freq. : Max. 1MHz Max. operating power : 700mW(500kHz) 8.0 3-1.7 0.5 CLQ102 SPECIFICATIONS Inductance : Max. 300mH Operating Freq. : Max. 500kHz Max. Operating Power : 870mW (100kHz) 2.0W (300kHz) 3.0W (500kHz) 35 DC/DC CONVERTER TRANSFORMERS CLS-10 3-1.27 3-1.27 4.5MAX. CONSTRUCTION 4-2.0 7.8MAX. 7.8MAX. CBM74 DIMENSIONS mm 0.8 TYPE DC/DC CONVERTER TRANSFORMERS DC/DC COVERTER TRANSFORMERS 6.0MAX. 0.6 8.0 10.0MAX. 14.5MAX. 11.0 6.0MAX. 12.2 0.6 13.7MAX. 12.0 Inductance : Max. 5.2mH Operating Freq. : Max. 500kHz Max. Operating Power : 1.0W (100kHz) 2.3W (300kHz) 3.4W (500kHz) 1.27 0.5 Inductance : Max.2.0H Operating Freq. : Max. 500kHz Max. Operating Power : 1.2W (100kHz) 3.8W (300kHz) 6.3W (500kHz) 9.8 1.27 6.5MAX. 10.0 12.0MAX. CEEH126 SPECIFICATIONS Inductance : Max. 1.1H Operating Freq. : Max. 500kHz Max. Operating Power : 1.1W (100kHz) 2.8W (300kHz) 4.2W (500kHz) 3-2.0 9.2 9.6 13.0MAX. CEI-120 CONSTRUCTION 4-2.0 11.3MAX. 8.2 16.5MAX. 7.5MAX. 0.5 14.5 12.0 17.0MAX. CEE156 Inductance : Max. 125mH Operating Freq. : Max. 500kHz Max. Operating Power : 2.5W (100kHz) 6.0W (300kHz) 8.8W (500kHz) 17.0MAX. 12.8 14.5 0.5 9.0MAX. Operating Freq. : Max. 500kHz Max. Operating Power : 2.6W (100kHz) 6.2W (300kHz) 9.3W (500kHz) 10.8MAX. 3-5.0 22.0MAX. 21.0 36 23.0 4-3.5 5.8MAX. 0.8 5-2.5 CEPH205 22.0 18.0 14.0 1.0 10.2MAX. 20.0 7.5 17.4 29.9MAX. 26.6 24.0 25.9MAX. CEPH199 20.6 0.7 24.0MAX. 17.1 17.6 18.6MAX. CEPH1710 4-3.5 15.0MAX. CEE158 4-2.5 4-2.5 20.0 21.0MAX. DC/DC CONVERTER TRANSFORMERS CEE-98 DIMENSIONS mm 6.35 TYPE Inductance : Max. 700mH Operating Freq. : Max. 500kHz Max. Operating Power : 4.0W (100kHz) 10.0W (300kHz) 14.0W (500kHz) Inductance : Max. 130mH Operating Freq. : Max. 500kHz Max. Operating Power : 3.2W (100kHz) 7.5W (300kHz) 11.0W (500kHz) Inductance : Max. 3.0H Operating Freq. : Max. 500kHz Max. Operating Power : 800mW (100kHz) 2.5W (300kHz) 4.2W (500kHz) DC/DC CONVERTER TRANSFORMERS DC/DC CONVERTER TRANSFORMERS TYPE DIMENSIONS mm 4.0MAX. 6.0MAX. MC-080U o8.7MAX. 8.5MAX. 3.0 o5.5 60 o0.4 o8.5MAX. 3.0 o6.0 o0.5 o11.0MAX. 5.0MAX. 2.0 o8.0 o11.0MAX. 7.3MAX. 3.0 o8.0 8.5MAX o13.0MAX. 36 o10.0 o13.0MAX. 8.5MAX. 36 3.5 o10.0 10.0MAX Operating Freq. : Max. 500kHz Max. Operating Power : 0.8W (100kHz) 1.9W (300kHz) 2.9W (500kHz) o8.0 o15.0MAX Operating Freq. : Max. 300kHz Max. Operating Power : 2.7W (100kHz) 6.5W (300kHz) 36 9.0 10.6 o0.5 6.9MAX. 2.8 10.0 4-2.5 12.6MAX. 12.6MAX. EEH116 Operating Freq. : Max. 500kHz Max. Operating Power : 1.5W (100kHz) 3.6W (300kHz) 5.0W (500kHz) 2.5 o0.5 LC-15 Operating Freq. : Max. 500kHz Max. Operating Power : 960mW (100kHz) 2.2W (300kHz) 3.4W (500kHz) 2.5 o0.5 LC128B Operating Freq. : Max. 500kHz Max. Operating Power : 360mW (100kHz) 1.1W (300kHz) 1.8W (500kHz) 36 o0.5 LC-128 Operating Freq. : Max. 500kHz Max. Operating Power : 330mW (100kHz) 1.0W (300kHz) 1.7W (500kHz) 36 o0.5 MC-100C LC-8, LC-8U Operating Freq. : Max. 500kHz LC-8 Max. Operating Power : 320mW (100kHz) 750mW (300kHz) LC-8U Max. Operating Power : 370mW (100kHz) 1.1W (300kHz) 1.8W (500kHz) 45 o0.5 LC-10 SPECIFICATIONS Inductance : Max. 5.4mH Operating freq. : Max. 500kHz Max. Operating Power : 2.5W (100kHz) 5.8W (300kHz) 8.6W (500kHz) 37 DC/DC CONVERTER TRANSFORMERS LC-8/LC-8U CONSTRUCTION DC/DC CONVERTER TRANSFORMERS DC/DC COVERTER TRANSFORMERS 10.0MAX. 3.5 CONSTRUCTION 7.3 10.8MAX. 2.9 14.0MAX. 13.5MAX. 8.5 13.0MAX. 16.0MAX. 4.0 24.0MAX. 17.7MAX. 3.8 38 4.0 4.0 Operating Freq. : Max. 300kHz Max. Operating Power : 8.7W (100kHz) 20.0W (300kHz) 17.5 13.0MAX. 5.0 Operating Freq. : Max. 300kHz Max. Operating Power : 4.8W (100kHz) 11.0W (300kHz) 6-2.5 15.25 o1.0 EEH2017 Operating Freq. : Max. 300kHz Max. Operating Power : 4.0W (100kHz) 12.0W (300kHz) 5.0 22.0MAX. 21.0MAX. o0.6 6.0 EI-20H Operating Freq. : Max. 300kHz Max. Operating Power : 3.1W (100kHz) 9.2W (300kHz) 3.5 4.0 4.0 4.0 18.0MAX. 11.0 o0.6 15.5MAX. 21.0MAX. EI-191 Operating Freq. : Max. 500kHz Max. Operating Power : 2.5W (100kHz) 6.0W (300kHz) 8.9W (500kHz) 4-3.3 4 - 3.81 17.0MAX. 15.0MAX. SEE-16 Inductance : Max. 6.5mH Operating freq. : Max. 300kHz Max. Operating Power : 2.5W (100kHz) 7.6W (300kHz) 4-2.5 3.5 o0.6 EE-13 Operating Freq. : Max. 300kHz Max. Operating Power : 2.0W (100kHz) 6.1W (300kHz) 8.0 2.5 2.5 2.5 12.5MAX. 10.8MAX. EE1011 5-2.5 12.5 o0.6 8.8MAX. 3.2 0.5 15.8MAX. 15.6MAX. EEH157 SPECIFICATIONS 10.0 2.5 2.5 2.5 2.5 11.5MAX. 14.0MAX. 23.0MAX. DC/DC CONVERTER TRANSFORMERS EER-137 DIMENSIONS mm o0.5 TYPE Operating Freq. : Max. 500kHz Max. Operating Power : 4.0W (100kHz) 10.0W (300kHz) 14.0W (500kHz) DC/DC CONVERTER TRANSFORMERS DC/DC CONVERTER TRANSFORMERS 18.5MAX. 3.5 15.2 o0.80 21.0MAX. 6.0 12.0 15.5 o0.8 7.5 26.0MAX. 6.0 Operating Freq. : Max. 500kHz Max. Operating Power : 11.0W (100kHz) 27.0W (300kHz) 40.0W (500kHz) 4-5.0 20.0 Operating Freq. : Max. 300kHz Max. Operating Power : 29.0W (100kHz) 67.0W (300kHz) 17.5 Operating Freq. : Max. 500kHz Max. operating power : 20W(500kHz) Weight : 30g 1 12- 2.54 3.5 o0.6 25.0MAX. 31.0MAX. 26.0MAX. 5-5.0 o0.8 33.0MAX. 35.0MAX. ER3023 5.0 o0.8 33.0MAX. 27.0MAX. EI-30 Operating Freq. : Max. 300kHz Max. Operating Power : 14.0W (100kHz) 32.0W (300kHz) 30.0 38.0MAX. 31.0MAX. Operating Freq. : Max. 300kHz Max. Operating Power : 22.0W (100kHz) 51.0W (300kHz) 10-2.54 29.0MAX NEW ERH2826 o0.8 17.0MAX 4.1 29.5MAX 4-5.0 0.6 EPH2815 Operating Freq. : Max. 300kHz Max. Operating Power : 16.0W (100kHz) 38.0W (300kHz) 17.5 23.0MAX. 29.5MAX. 25.0MAX. EI-28 4-5.5 3.0 Operating Freq. : Max. 300kHz Max. Operating Power : 7.8W (100kHz) 18.0W (300kHz) 20.0 24.0 21.0MAX. 5-4.5 21.0MAX. 28.0MAX. EI-255B Operating Freq. : Max. 500kHz Max. Operating Power : 3.3W (100kHz) 10.0W (300kHz) 16.5W (500kHz) 4.0 4.0 4.0 4.0 17.5MAX. 23.0MAX. SPECIFICATIONS DC/DC CONVERTER TRANSFORMERS EI-22 CONSTRUCTION 4-3.81 21.5MAX. 22.3MAX. EF2017 DIMENSIONS mm o0.8 TYPE 39 DC/DC CONVERTER TRANSFORMERS DC/DC CONVERTER TRANSFORMERS 33.0MAX. DC/DC CONVERTER TRANSFORMERS 40 3.5 CONSTRUCTION SPECIFICATIONS 25.0 17- 2.5 33.0MAX. 49.0MAX. ER4831 DIMENSIONS mm 36-o0.6 TYPE Inductance : Max. 56mH Operating Freq. : Max. 500kHz Max. operating power : 60W(500kHz) Weight : 75g SIGNAL COMMON MODE CHOKE COILS Common Mode Choke Coils for DC LINES OUTLINE DC line noise filter for LCDTV,PC and Electronic Equipments. 3.9 2.3 1.2 7.50.3 2.3 4.3 SIGNAL COMMON MODE CHOKE COILS MAX.4.8 MAX.7.9 1.60.3 K LANDPATTERNS(mm) 1.50.3 K DIMENSIONS(mm) CPFC805 K SPECIFICATIONS Impedance D.C.R at100MHz (1-4) (2-3) 500 or more 7.5m or less Rated current 4.5A K IMPEDANCECHARACTERISTICS IMPEDANCE() 1000 100 1M 10M 100M 1G FREQUENCY(Hz) CPF6D36 K DIMENSIONS(mm) Max.6.2 4.2 K LANDPATTERNS(mm) 5.3 (3.1) 2.5 2.1 1.2 4.3 5.3 1.5 2.1 MAX.3.8 K SPECIFICATIONS Impedance D.C.R at100MHz (1-4) (2-3) 600 or more 22m or less Rated current 2.5A K IMPEDANCECHARACTERISTICS IMPEDANCE() 1000 100 1M 10M 100M 1G FREQUENCY(Hz) About CPF6D36 This specification might be changed without notice due to improving. Thank you for your understanding. 41 SIGNAL COMMON MODE CHOKE COIL Common Mode Choke Coil for Communication OUTLINE It is common mode noise filter of small and SMD type It has 4-line construction and is suitable to IEEE1394. SIGNAL COMMON MODE CHOKE COIL CBM6068 K DIMENSIONS(mm) 8-0.4 6-1.27 6.4 3.05 1 8 2 7 3 6 4 5 6.0MAX. 6-1.27 0.4 PIN1 0.57 K LANDPATTERNS(mm) K MEASUREMENTCIRCUITDIAGRAM 7 3 6 4 5 3.81 2 1.5 1.27 8 0.8 8.0 1 SUGGEST PCB LAYOUT TOLERANCE: K SPECIFICATIONS ITEM SPECIFICATION CONDITION 0.3 MAX 0.65AMAX 20 -2.82.0dB -7.32.5dB -12.03.0dB 50MHz 100MHz 300MHz -14.03.0dB 500MHz (1-8)TO(2,3,4,CORE),(2-7)TO(3,4,CORE) (3-6)TO(4,CORE),(4-5)TOCORE INSULATIONRESISTANCE DC100V 0.5mA,1minute. (1-8)TO(2,3,4,CORE),(2-7)TO(3,4,CORE),(3-6) TO(4,CORE),(4-5)TOCORE 100M MIN 100Vdc,1minute COMMONMODEIMPEDANCE 185 Typical 100MHz D.C.R1-8 2-7 3-6 4-5 Idc INSERTIONLOSS HIPOT About CBM6068 This specification might be changed without notice due to improving. Thank you for your understanding. 42 SIGNAL COMMON MODE CHOKE COILS / DC COMMON MODE CHOKE COILS SIGNAL COMMON MODE CHOKE COILS TYPE 2.54 1.27 2.5MAX. 0.25 4.6 CONSTRUCTION Inductance : 50H - 500H Leakage Inductance : Max.0.3H - Max.0.35H Line capacitance : Max.6.0pF - Max.10.0pF D.C.R : Max.250m - Max.300m 2.54 1.27 2.5MAX. 0.25 0.5 Inductance : Max.500H Leakage Inductance : Max.0.25H Line capacitance : Max.10.0pF D.C.R : Max.700m 6.5 9.7MAX. 9.0MAX. SIGNAL COMMON MODE CHOKE COILS / DC COMMON MODE CHOKE COILS CLP82 SPECIFICATIONS 0.5 6.5 9.7MAX. CLP42 DIMENSIONS mm SFC68 2.54 4.5 0.6 8.2MAX 1.0 Inductance : 4.3H - 121.5H D.C.R. : 19.5m - 114m Rated Current : 600mA - 2.9A 5.08 7.5MAX 6.2MAX CRR32 3.4MAX. 2.2 Impedance : 350 - 800 (at 100MHz) D.C.R. : 200m - 500m Rated Current : 400mA - 800mA 3.4 4.7MAX. 2.8MAX. 0.1 DC COMMON MODE CHOKE COILS 12.0MAX. 4.0 16.5MAX. 3.5 Inductance : 0.20H - 2.69H Rated current : 2.2A - 3.4A o0.6 7.0 Inductance : 8.6mH D.C.R. : 3.0 Rated current : 300mA 5.08MAX. 9.5MAX. 7.0 2.54 1.3 0.15 5.7MAX. CPFC74 SPECIFICATIONS 7.5 o0.7 11.0MAX. 16.5MAX. UU9TF CONSTRUCTION 10.0 10.3MAX. 12.5MAX. BM1012LF DIMENSIONS mm 8.0 TYPE 6.4 Impedance : 100 - 1k (at100MHz) D.C.R. : 60m - 120m Rated current : 1.5A - 3.0A 43 NORMAL MODE CHOKE COILS NORMAL MODE CHOKE COILS TYPE DIMENSIONS mm CONSTRUCTION SPECIFICATIONS BM27 7.5MAX. 25.5 Impedance : 300 - 900 (10MHz) D.C.R : 150m - 250m 5.0 9.5MAX. 6.3MAX. 12.7MAX. SLF0912 o0.5 (23.0) Inductance : 18.0H D.C.R. : 44m Rated current : 1.8A (5.0) 0.5 20.5MAX. PFN1316 (10.0) Inductance : 21H - 37H D.C.R. : 43m - 58m Rated current : 2.0A - 5.4A (10.5) 16.0MAX. 14.5MAX. Inductance : 32H - 88H D.C.R. : 31m - 53m Rated current : 3.7A - 4.9A (10.0) 29.0MAX. PFN1825 (15.0) 24.0MAX. 29.00MAX. Inductance : 52H - 83H D.C.R. : 30m - 38m Rated current : 5.4A - 6.1A 10.0 35.5MAX. PFN2029 19.0MAX. 16.0 21.0MAX. 24.0MAX. o1.10 26.0MAX. 31.0MAX. PFN2028 (10.0) NORMAL MODE CHOKE COILS 8.7MAX. 2.5MAX. 24.0MAX. 44 (16.0) 21.0MAX. Inductance : 52H - 83H D.C.R. : 30m - 38m Rated current : 5.4A - 6.1A AC COMMON MODE CHOKE COILS AC COMMON MODE CHOKE COILS 3.5 7.0 3.5 16.5MAX. 2.8 o0.6 17.0MAX. 5.7 o0.6 23.0MAX. 4.0 23.0MAX. o0.7 9.5MAX. 3.5 9.0 4-o0.6 28.5MAX. Inductance : 3.3mH - 51.0mH D.C.R. : 710m - 9.12 Rated current : 150mA - 650mA 14.0 4.5 Inductance : 470H - 10.0mH D.C.R. : 150m - 4.0 Rated current : 200mA - 1.1A 10.0 13.0 20.0MAX. 6.20 22.0MAX. UU16LF 10.0 4.0 o0.7 17.0MAX. 13.0MAX. LF1290 Inductance : 3.3mH - 51.0mH D.C.R. : 710m - 9.12 Rated current : 150mA - 650mA 10.0 o0.7 17.0MAX. 5.7 18.5MAX. UU10LFB Inductance : Min.19.0mH D.C.R. : 6.5 Rated current : 150mA 7.0 18.5MAX. UU10LF Inductance : Min. 19.0mH D.C.R. : 6.5 Rated current : 150mA 7.0 12.5MAX. 2.8 3.4 15.5MAX. 16.5MAX. UU9LFBH 8.0 11.0MAX. 3.4 Inductance : 470H - 10.0mH D.C.R. : 150m - 40 Rated current : 200mA - 1.0A 8.0 2-o0.6 16.5MAX. 7.0 16.5MAX. UU9LFB 8.0 2-o0.6 12.5MAX. 3.5 15.5MAX. Inductance : 470H - 10.0mH D.C.R. : 150m - 4.0 Rated current : 200mA - 1.0A AC COMMON MODE CHOKE COILS UU9LFH SPECIFICATIONS 8.0 16.5MAX. CONSTRUCTION 13.0 11.0MAX. 16.5MAX. UU9LF DIMENSIONS mm 13.0 TYPE Inductance : 1.5mH - 30mH D.C.R. : 125m - 2.5 Rated current : 400mA - 1.9A 45 AC COMMON MODE CHOKE COILS AC COMMON MODE CHOKE COILS 28.5MAX. 4.5 o0.7 Inductance : 1.5mH - 30mH D.C.R. : 200m - 2.5 Rated current : 400mA - 1.9A Inductance : 2.2mH - 33mH D.C.R. : 240m - 3.42 Rated current : 300mA - 1.3A 21.0MAX. 0.8 13.0 4.5 4-o0.8 o0.8 21.0MAX. 4.0 Inductance : 1.8mH - 68.0mH D.C.R. : 72m - 1.82 Rated current : 600mA - 2.6A 15.0 21.0 25.2MAX. o0.8 LF2420 Inductance : 2.2mH - 33mH D.C.R. : 240m - 3.42 Rated current : 300mA - 1.3A 20.0 24.0MAX. 4.0 29.5MAX. 29.5MAX. LF2823 10.0 13.0 22.5MAX. 24.0 17.2MAX. 22.0MAX. LF2020 SPECIFICATIONS 10.0 17.0MAX. 3.5 22.0MAX. 25.2MAX. Inductance : 2.5mH - 35mH D.C.R. : 130m - 1.58 Rated current : 600mA - 2.0A o0.9 (10.0) 25.0MAX. (15.0) 20.0MAX. Inductance : 450H - 7.0mH D.C.R. : 8.5m - 135m Rated AC current : 2.5A - 10.0A 5.0 1.5MAX. 27.0MAX. PFC2225B 34.0MAX. PFC2831 5.0 1.5MAX. AC COMMON MODE CHOKE COILS LF2115 CONSTRUCTION 13.0 20.0MAX. 6.20 22.0MAX. UU16LFB DIMENSIONS mm 17.0 TYPE o0.8 (18.0) 34.0MAX. 46 (16.0) 25.0MAX. Inductance : 600H - 1.5mH D.C.R. : 4.8m - 18.5m Rated current : 8.5A - 17A ANTENNA / FILTER TransponderRF-ID (TX) OUTLINE Suitable for Key less enter and Home security system's Tx-ant K DIMENSIONS(mm) AS737 72.5 ANTENNA / FILTER 14.5 3 2 7.5 1.3 1 0.35 4.6 4.6 K SCHEMATICS L L C C 3 2 1 2 1 Itispossible2terminaltype() FEATURES 1.Pre-tuneAntprovidehighefficiencyincustomerline 2.Moldingimprovedfromenvironmentalsuffering 3.2terminalsoutavailable 4.Packagingcanbeavailable(withHarness,Connector andCasing) K SPECIFICATIONS(REFERENCE) Tuning Frequency Impedance 125.01.0kHz within 1.0 (typ.) Itispossibleforcustomerspecificationatharnesslengthandconnectorform. This specification might be changed without notice due to under developing and improving. Thank you for your understanding. 47 ANTENNA / FILTER Noise Filter OUTLINE It is AM Radio Noise reduction filter which is combined with an antenna of Smart Entry System. K DIMENSIONS(mm) 9.2 7.6 10.0MAX. 0.4 9.8MAX. 11.0MAX. K SCHEMATICS 3-2.0 ANTENNA / FILTER CEP79 K SPECIFICATIONS Inductance (4-1) D.C.R (4-1) D.C.R (8-5) Temperature Rise Current (Typ.) 260H 35% (2-1, 4-3 tie) 50m below (3-4, 2-1 tie) 50m below (5-6, 8-7 tie) 2.5A@=30C (D.C.Current) 6.8A@=30C (Dummy Load Current) K Characteristics Common Attenuation 20 10 dB 0 0pF Add on 270pF -10 -20 Add on 150pF -30 -40 48 100k 1M 10M FREQUENCY(Hz) 4 5 1 8 3 6 2 7 ANTENNAS TransponderRF-ID (RX) OUTLINE Antenna coils for Keyless Entry Systems, Smart Entry Systems and Passive Entry Systems RF-ID etc. K LANDPATTERNS(mm) K DIMENSIONS(mm) NEW 11.6MAX. 8.5 (1.7) 8.1 12.3 K DIMENSIONS(mm) K LANDPATTERNS(mm) 11.6MAX. 2.95MAX. 1.7 8.6 1.7 3.5MAX. CAS11D28 ANTENNAS 3.3MAX. 2.3MAX. 3.4 CAS11D21 8.6 12.3 K DIMENSIONS(mm) 3.0 3.0MAX. 4.0MAX. K LANDPATTERNS(mm) 4.8MAX. CAS14D26 11.4 15.0MAX. 12.0 2.4 15.6 K DIMENSIONS(mm) K LANDPATTERNS(mm) 16.4 1.6MAX. NEW 17.0MAX. 1.3 14.2 3.5MAX. 3.4 CAS16D14 13.1 1.3 17.4 CAK15D14 K DIMENSIONS(mm) K LANDPATTERNS(mm) 1.5 MAX.1.6 1.7 6.85 16.4 13.5 17.2 13.5 14.7 0.2 K SPECIFICATIONS Product Type Inductance CAS11D21 CAS11D28 CAS14D26 CAS16D14 CAK15D14 2.3mH 500H7.2mH 900H2.4mH 1mH6mH 1mH6mH Q Min. 30 Min. 30 Min. 30 35 (TYP.) 13 (TYP.) S.R.F. Sensitivity Frequency 1MHz 700kHz 1MHz 650kHz 1MHz Min. 29mV/A/m 50mV/T (7.2mH) 38mV/T (2.3mH) 68mV/T (6mH) 55mV/T 125kHz 125kHz 125kHz 125kHz 125kHz 49 ANTENNAS OUTLINE This is the RF-ID transponder coil, which is for related security equipment and keyless entry systems for automobiles. NEW 1.0 o2.6 K SCHEMATICS 2.7 K DIMENSIONS(mm) AR9D27 2 9.2 o2.7 1.5 1 0.5 ANTENNAS 1.0 1.5 K SPECIFICATIONS Inductance 1.0mH5.0mH Q Min. 30 S.R.F. Sensitivity Frequency 1000kHz 41mV/T (5.0mH) 125kHz Thisspecificationmightbechangedwithoutnoticeduetounderdevelopingandimproving.Thankyouforyourunderstanding. OUTLINE It is transponder antenna coil which also performs as key-less entry antenna built into key case. 20.0MAX. 1.9MAX. 20.6 16.0 4.4 4.3 3.6 19.0 K LANDPATTERNS(mm) 5.3MAX. K DIMENSIONS(mm) CAS19D17C 17.2 K SPECIFICATIONS(REFERENCE) Inductance 1mH7mH Q Min. 40 S.R.F. Sensitivity Frequency Min. 400kHz 82mV/T (7mH) 125kHz TPMSRF-ID OUTLINE It is TPMS(Tire Pressure Monitoring System) K DIMENSIONS(mm) K LANDPATTERNS(mm) 9.7 11.55MAX. 3.0 3.6MAX. CAS113 3.0MAX. 1.60 2.30 9.0 12.1 K SPECIFICATIONS(REFERENCE) Inductance 7.2mH 2.89mH 50 Q 55 45 S.R.F. Sensitivity Frequency 700kHz 700kHz 50mVp-p/T 31mVp-p/T 125kHz 125kHz For xDSL LINE TRANSFORMER & SPLITTER COILS For xDSL LINE TRANSFORMER & SPLITTER COILS RM4 EEH1313 RM6 EEH1617 CEP79 CEP1311 CEP811 EP1311 TEL For xDSL LINE TRANSFORMER & SPLITTER COILS PC CEP1311C CPFC85 Line Transformer OUTLINE It is a xDSL line transformer which corresponds to the smaller foot print demand for limited equipment installation space in central offices. Application is the xDSL line transformer used in central offices. 0.4 10.0MAX. 9.8MAX. 11.0MAX. K SCHEMATICS 9.2 7.6 3-2.0 K DIMENSIONS(mm) CEP79 LINE (PRI) 1 8 3 6 2 7 4 5 CHIP (SEC) APPLICATION Linetransformerforcontroloperationside. K SPECIFICATIONS Impedance (1-4) Inductance (1-4) Turns Ratio Leakage Inductance (1-5) D.C.R (1-3) D.C.R (2-4) D.C.R (5-7) D.C.R (6-8) Insertion loss Total Harmonic Distortion Longitudinal Balance Isolation Voltage Designed to reflect 100 on the PRI with 100 load on SEC. 850H 10% (10kHz 0.1V) 2+3 tie 1 : 1 (1%) (PRI : SEC) 3.6H (TYP) (100kHz 0.1V) 2+3, 6+7 tie, 5+8 short 1.2(TYP) (20C) 0.9(TYP) (20C) 0.85(TYP) (20C) 0.8(TYP) (20C) 0.1dB(TYP) (30kHz-1.1MHz) -75dB(TYP) (40kHz, 5.3Vrms) -90dB(TYP) (100kHz, 5.3Vrms) 70dB(TYP) (100kHz) (6, 7 GND) 1875Vrms 1SEC (50Hz/60Hz) between PRI-SEC Longitudinal Balance : This characteristic was measured with our longitudinal test circuit boad. 51 For xDSL LINE TRANSFORMER xDSL LINE TRANSFORMER OUTLINE Application is the xDSL line transformer. CPE1311C K DIMENSIONS(mm) NEW 13.5MAX. [.531] 12.3MAX. [.484] 12x 0.50.1 [.020.004] 5.1 [.201] 2x 3.4 [.134] TERMINAL CONNECTION (BOTTON VIEW) 16 1 sumida 17.3MAX. [.681] 12x C10113A 2.2 [.087] 12x 1.0 [.039] Tx 3 16.1 [.634] Country of Origin 1.7 7x [.067] Date Code For xDSL LINE TRANSFORMER 15 2 CHIP 12 5 6 Rx 7 Pin 1. Pin numbers increment clockwise around the part. POLARITY K FEATURES ApprovedbyGlobespanVirataforusewiththefollowingchipsets ArgonTM /Plus,ArgonTM/ Plus,CentragateTM,TitaniumTM Ultra/UltraPlus,andVikingTM SuperbTHDperformance (-93dBtyp.from20kHz,TxandRxwindings) .. ComplieswithEN60950/UL60950/BABT/TU Vsupplementary insulationrequirmentsforworkingvoltagesupto250Vrms K ELECTICALSPECIFICATIONS Paramenter Conditions Limit Units Inductance(OCL) lineside,10kHz,0.1V,(16-9)tie11+14 700 H 6 TurmsRatio(T/R) chip-Tx:line=(1- 4):(16-9)tie2+3,11+14 1:3.95 N/A +1.5% -1.0% chip-Rx:line=(5-8):(16-9)tie6+7,11+14 1:2.04 N/A 1.5 TotalHarmonicDistortion(THD) TxandRxwindings,20kHz,5.3Vrms -87 dB Max. LeakageInductance(LL) 100kHz,0.1V,(16-9)tie1+4,2+3,11+14 32 H Max. 100kHz,0.1V,(16-9)tie5+8,6+7,11+14 32 H Max. LongitudinalBalance(LB) 35kHz-650kHz(16-9)tie11+14 53 dB Min. DCResistance(DCR) lineside,(16-9)tie11+14 3.5 Max. chipside-Tx,(1- 4)tie2+3 0.98 Max. chipside-Rx,(5-8)tie6+7 1.74 Max. 100kHz,0.1V,(1-16)tie2+3,11+14 50 pF Max. 100kHz,0.1V,(5-16)tie6+7,11+14 50 pF Max. 1875 Vr ms Min. reflectedonlineside 100 Non. loadonchipside,Tx 5.6 Non. loadonchipside,Rx 300 Non. - 40to+85 Non. InterwindingCapacitance(Cww) DielectricBreakdownIsolation 1sec,(1-16)tie2+3,4+5,6+7,11+14 Tolerance (equivalentto1min,1500Vrms) Impedance OperatingTemperature 52 11 10 9 8 11.90.25 [.469.010] 1.70.2 7x [.067.008] 14 13 4 LINE For xDSL LINE TRANSFORMERS xDSL LINE TRANSFORMER OUTLINE Application is the xDSL line transformer. K DIMENSIONS(mm) CEP1311 13.5 MAX. [.531] 12.3 MAX. [.484] 8x 2.50.25 [.098.010] 6 10 sumida C10120 For xDSL LINE TRANSFORMERS 17.7 MAX. [.697] Country of Origin Date Code 5 1 Pin 1. Pin numbers increment clockwise around the part. 10x 0.650.20 [.026.008] K RECOMENNEDLAND PATTRNS K SCHEMATICS (BOTTOM VIEW) 10 x 1.3 [.051] 16.5 [.650] 2.5 8x [.098] LINE 10 x 2.54 [.100] 1 10 2 9 3 8 4 7 5 6 10.0 [.394] EP1311 CHIP POLARITY K DIMENSIONS(mm) 13.8MAX. [.543] 13.1MAX. [.516] 2.50.3 [.098.012] 10 14.0MAX. [.551] Country of Origin Date Code 10x 6 10.00.3 [.394.012] 0.60.2 [.024.008] 1 5 10.00.3 [.394.012] 5.30.5 [.209.020] Pin 1. Pin numbers increment clockwise around the part. K TERMINALLAYOUT 2.5 [.098] K SCHEMATICS 0.9 10 x [.035] (BOTTOM VIEW) 10.0 [.394] LINE 10.0 [.394] 1 10 2 9 3 8 4 7 5 CHIP 6 POLARITY K FEATURES ApprovedbyTIforusewiththefollowingchipsets AR7,AR7V,AR7VWi. C10120&T10120forAnnexA,C. C10121&T10121forAnnexB. SuperbLBfrom30kHzto1.1MHz ComplieswithEN60950/BABT/TUVsupplementary insulationrequirmentsforworkingvoltagesupto250Vrms K ELECTRICALSPECIFICATIONS Sumida Type Part No. INDUCTANCE (Ls)1-4 10kHz, 0.1V, (2+3)Tie TURNS RATIO (10-7):(1-4) LL MAX (1-4) 100kHz, 0.10Vac THD MAX (dB) 100kHz, 5.3Vrms LB MAX (dB) 30kHz-1.1MHz DCR MAX () (1-4)/(10-7) IMPEDANCE (1-4)/(10-7) CEP1311 CEP1311 EP1311 C10120 C10121 T10120 1.5mH 6% WITHIN 400uH 5% WITHIN 1.5mH 6% WITHIN 1:2(+-2%) 1:2(+-2%) 1:2(+-2%) 14uH (2+3, 8+9)Tie 7uH (2+3, 8+9)Tie 14uH (2+3, 8+9)Tie -90db -90db -90db 60db 60db 60db 1.82/0.76 0.63/0.33 1.82/0.76 100/25 100/25 100/25 EP1311 T10121 400uH 5% WITHIN 1:2(+-2%) 7uH (2+3, 8+9)Tie -90db 60db 0.63/0.33 100/25 53 For xDSL POTS SPLITTER COILS xDSL POTS SPLITTER COILS OUTLINE It is pot splitter coil for xDSL. correspondence with each ITU-T (Annex-A/E/C) standard. Using EE core for compatibility and competitive cost merit. 14.0MAX. 5.3 10 5 6 1 10 o0.6 For xDSL POTS SPLITTER COILS 14.0MAX. 13.0MAX. K SCHEMATICS 4 - 2.5 K DIMENSIONS(mm) EEH1313 OUTLINE ApotsplittercoilforADSLSplitter. FEATURES CorrespondencewitheachITU-T(Annex-A/E/C)standard. UsingEEcoreforcompatibilityandcompetitivecostmerit. APPLICATION ADSLSplitter SPECIFICATIONS PartNo. Inductace D.C.R 50M-020 2.4mH (Typ.)(at1kHz,0.1V) 2.7(Typ.) 50M-021 0.983mH (Typ.)(at1kHz,0.1V) 1.0(Typ.) 50M-022 0.712mH (Typ.)(at1kHz,0.1V) 0.9(Typ.) Weight 5g 17.6MAX. K SCHEMATICS 4.0 12 6 7 1 12 o0.6 17.0MAX. 15.5MAX. 5 - 2.5 K DIMENSIONS(mm) EEH1617 OUTLINE InductoravailableforADSLSplitter. FEATURES CorrespondencewitheachITU-T(Annex-A/E/C)standard. UsingEEcoreforcompatibilityandcompetitivecostmerit. APPLICATION ADSLSplitters SPECIFICATIONS PartNo. Inductace 50M-026 10.5mH(Typ.)(at1kHz,0.1V) D.C.R 5.8(Typ.) 50M-027 4.5mH(Typ.)(at1kHz,0.1V) 2.3(Typ.) 50M-028 4.0mH(Typ.)(at1kHz,0.1V) 2.2(Typ.) Weight 10g K ApplicationCircuit C6 C4 Choke C1 C2 C3 Input Output L1 L2 Inductor 54 Inductor Output POTS Signal Only L3 Capacitor C5 Inductor Input ADSL & POTS Signals C7 UU16LF EEH1313 Capacitor EEH1617 Capacitor EEH1617 For xDSL POTS SPLITTER COILS xDSL POTS SPLITTER COILS K RECOMENNEDLAND PATTRNS K DIMENSIONS(mm) CEEH1011 NEW 12.0MAX. 8.400.20 8.400.20 9.16 10.8MAX. 12.0MAX. K SCHEMATICS 4x2.74 4x1.40 4x1.00 For xDSL POTS SPLITTER COILS FEATURES * Small footprint for Central Office applications * For use with Legerity's Intergrated Voice and Data (IVD) solution * Customized inductance values available K SPECIFICATIONS InductanceMIN(mH) PartNo. 20kHz 0.1Vac,0Adc 20kHz 0.1Vac,0.12Adc 20kHz 0.1Vac,0.23Adc C15100 8.74 8.46 4.00 C15108 3.42 3.40 20kHz 0.1Vac,0.46Adc LLMAX 100kHz,0.10Vac THDMAX(dB) 50kHz,12.3Vrms LBMAX(dB) 200Hz-3200Hz DCRMAX() PRI/SEC 25H -85db 65db 26.0/26.0 11H -85db 65db 18.5/18.5 1.00 K DIMENSIONS(mm) RM4 13.00 MAX [0.512] K SCHEMATICS 10.92 MAX [0.430] 3.0 [0.120] CONNECTING PIN PATTERN: 2 (BOTTOM VIEW) 2.5 mm GRIDS 6 2 6 3 o1.0 x 4 13.00 MAX [0.512] PRI (LINE) 2 SEC (DEVICE) 5 6 3 5 5 3 POLARITY 0.50 [0.020] FEATURES * Small footprint for Central Office applications * For use with Legerity's Intergrated Voice and Data (IVD) solution * Customized inductance values available K SPECIFICATIONS InductanceMIN(mH) PartNo. 20kHz 0.1Vac,0Adc 20kHz 0.1Vac,0.12Adc 20kHz 0.1Vac,0.23Adc T15107 8.74 8.46 4.00 LLMAX 100kHz,0.10Vac THDMAX(dB) 50kHz,12.3Vrms LBMAX(dB) 200Hz-3200Hz DCRMAX() PRI/SEC 8H -85db 65db 26/26 T= Through Hole K DIMENSIONS(mm) RM6 20.00 MAX [0.787] 13.00 MAX [0.512] K SCHEMATICS 3.0 [0.120] CONNECTING PIN PATTERN: 6 2 2.54 mm GRIDS 2 3 20.00 MAX [0.787] o1.0 X 4 5 3 (BOTTOM VIEW) o1.4mm X 2 6 PRI (LINE) 2 5 SEC (DEVICE) 6 3 5 POLARITY PIN 3 INDICATOR 0.50 [0.020] FEATURES * Excellent Longitudinal Balance * For use with Legerity's Intergrated Voice and Data(IVD) solution * Customized inductance values available K SPECIFICATIONS InductanceMIN(mH) PartNo. LLMAX THDMAX(dB) LBMAX(dB) DCRMAX() 20kHz 0.1Vac,0Adc 20kHz 0.1Vac,0.12Adc 20kHz 0.1Vac,0.23Adc 100kHz,0.10Vac 50kHz,12.3Vrms 200Hz-3200Hz PRI/SEC 6.44 6.30 4.00 8H -85db 65db 11/11 4.00 8H -85db 65db 13.6/13.6 T15101 T15102 8.74 8.46 T= Through Hole 55 For xDSL COMMON MODE CHOKE COIL xDSL COMMON MODE CHOKE COIL OUTLINE SMD Common Mode Choke avail for xDSL modem. This is small size, SMD and having that impedance is 15k at 1.0MHz. K DIMENSIONS(mm) 5.5MAX. 9.3MAX. 7.2 1.8 0.9 3.4 8.2MAX. For xDSL COMMON MODE CHOKE COIL 0.5 6.9 CPFC85 0.05 K SCHEMATICS S 2 3 S 1 4 K IMPEDANCE/COMMONMODEATTENUATIONCHAR. Common mode attenuation cha. 0 10k -10 ATTENUATION(dB) IMPEDANCE() Impedance cha. 100k 1k 100 10 1 0.001 0.01 0.1 1 K ELECTRICALSPECIFICATIONS INDUCTANCE Min. 3.3mH D. C. R (1-4) (2-3) Max. 0.6 IMPEDANCE (1-4) (2-3) Min. 2.3 IMPEDANCE (1-4) (2-3) Min. 9.8 1MHz IMPEDANCE (1-4) (2-3) Min. 4.2 10MHz COMMON MODE ATTENUATION 30 dB(typ.) 100kHz COMMON MODE ATTENUATION 43 dB(typ.) 1MHz COMMON MODE ATTENUATION 38 dB(typ.) 10MHz WITHSTAND VOLTAGE (line-line) Min. 700Vrms (2 sec.) 50Hz/60Hz 1.E M I F i l t e r o f 1 5 k I m p e d a n c e a t 1.0MHz. 2.Smallsize. 3.ReflowsolderingispossibleasSMDtype. APPLICATION 1.ADSLModem 2.Telecomapplications 56 -30 -40 -50 0.01 10 100 FREQUENCY(MHz) FEATURES -20 100kHz 100kHz 0.1 1 10 100 FREQUENCY(MHz) STB/FAX/MODEM TRANSFORMERS STB/FAX/MODEM TRANSFORMERS OUTLINE This is a Fax modem transformer of V.32(9.6kbps) to V.92 (56kbps) conformity. It is a UL/BABT authorization article. MT1610/MT1610B K DIMENSIONS(mm) 16.60 MAX [0.654] K SCHEMATICS 3.50 (+1.0/-0.5) [0.138 (+0.004/-0.020)] 10.50 MAX [0.413] o0.6 [0.024] 3 (BOTTOM VIEW) 4 3 2 sumida MIT-400L SECONDARY (LINE) (MODEM) 4 1 INTERCHANGEABLE PRIMARY OR SECONDARY 1 2 K SPECIFICATIONS FEATURES * Internationally Safety Approved for Supplementary Isolation * EN 60950/BABT/TUV * Low cost * V.92 (56kbps) to V.32 bis (14.4kbps) THT fax/modem transformer * Reinforced safety encapsulated versions also available MT2212 PRIMARY STB/FAX/MODEM TRANSFORMERS COO XX-XX 16.60 MAX [0.654] Impedance() THD@600Hz (dB) PRI:SEC IL(dB) RL(dB) LL (mH) DCR() PRI:SEC -85 1.90 20 3.7 82/106 600:560 -87 1.55 17 17 70/70 600:560 -84 1.55 17 17 70/70 600:600 -62 1.80 14 15 70/70 PartNo. Speed MIT4033L V.92 600:420 MIT2050L V.92 MIT250L V.34 MIT400L V.32bis K MIT4033LApprovedByTDKusefor79M1903chip. K DIMENSIONS(mm) K SCHEMATICS 2.79 / 3.56 [0.110 / 0.140] 24.0 MAX [0.945] 12.45 MAX [0.490] TERM NO.'S FOR REF (BOTTOM VIEW) 3 FEATURES * Internationally Safety Approved for Supplementary Isolation * EN 60950/BABT/TUV * Low cost * V.32 (9.6 kbps) THT fax/modem "Wet" Transformer ("Wet" means ability to withstand some current.) MIT-6120 COO XX-XX sumida 2 2 3 23.0 MAX [0.906] 1 PRIMARY SECONDARY (LINE) (MODEM) 4 1 4 K SPECIFICATIONS PartNo. Speed Impedance() PRI:SEC IL(dB) RL(dB) LL (mH) DCR() PRI:SEC DCCurrentPRI (mADC) MIT6120 V.32 600:301 3.75 17 11 152/152 65 MIT4115V V.32 600:470 2.65 14 7.5 110/128 100 K MIT4115VApprovedByTDKusefor73M2901, 73M2901cand73C2901CLchip. 57 STB/FAX/MODEM TRANSFORMERS STB/FAX/MODEM TRANSFORMERS CMT97B K DIMENSIONS(mm) 9.75 MAX [0.384] K LANDPATTERNS(mm) ESMIT-100 6 R 3.33 [0.131] 2.54 [0.100] (BOTTOM VIEW) 5 4 15.55 [0.612] 3 2 1 3 K SPECIFICATIONS STB/FAX/MODEM TRANSFORMERS FEATURES * Internationally Safety Approved for Reinforced Isolation * EN 60950/BABT/UV * V.92 (56kbps) to V.32 bis (14.4kbps) encapsulated SMT fax/modem transformer Impedance() THD@600Hz (dB) PRI:SEC IL(dB) RL(dB) LL (mH) DCR() PRI:SEC -89 3.50 20 10.3 180/180 600:280 -90 4.60 20 9.3 235/260 600:330 -84 2.50 22 7.5 150/150 V.32bis 600:420 -78 1.85 21 4.6 90/90 V.32bis 600:390 -80 2.0 24 5.6 115/115 PartNo. Speed ESMIT3300 V.92 600:260 ESMIT3181 V.92 ESMIT300 V.92 ESMIT190 ESMIT100 K LANDPATTERNS(mm) K DIMENSIONS(mm) 2.54 [0.100] 2.40 MAX [0.094] 4 1.40 [0.055] 5.2 MAX [0.205] K SCHEMATICS 1.84 [0.072] 4154 COO XXXXX 3 1 (BOTTOM VIEW) 3 2 9.14 [0.360] 9.65 [0.380] 7.1 MAX [0.280] 1 2 SECONDARY (MODEM) PRIMARY (LINE) 0.50 [0.020] 4 1 : 1.67 2.54 [0.100] K SPECIFICATIONS FEATURES * EN 60950/BABT/UV * V.92 (56kbps) Digital Isolation Barrier for Conexant DAAs PartNo. Speed Turns Ratio LsPRI@100KHz Min.(H) Cww (pF) SelfResIR (MHz) D.C.R() PRI/SEC EMIT4152 V.92 1:2.6 40 4 8.0 0.250/0.450 EMIT4153 V.92 1:2.0 40 4 8.0 0.250/0.450 EMIT4155 V.92 1:1.67 30(at10kHz) 3 8.0 0.250/0.325 K LANDPATTERNS(mm) K DIMENSIONS(mm) 2.54 3.5MAX 1.40 [0.055] 1.40 [0.055] (BOTTOM VIEW) 3 2 XXXX S3045 5.2MAX K SCHEMATICS 3 4 7.1MAX 9.14 1 SECONDARY (MODEM) PRIMARY (LINE) 9.65 [0.380] 1 1 : 2.00 4 2 0.5 FEATURES * Safety standard approved * V.92 (56 kbps) Digital Isolation Barrier for Conexant DAAs 58 4 INTERCHANGEABLE PRIMARY OR SECONDARY 1.52 [0.059] 0.80 [0.033] CBM5D33 SECONDARY (MODEM) PRIMARY (LINE) 1 2 3 CBM5D20 6 1 4 5 6 14.65 MAX [0.577] R C 12.70 MAX [0.500] 2.54 [0.100] COO XX-XX sumida 7.10 MAX [0.279] K SCHEMATICS 2.54 [0.100] K SPECIFICATIONS PartNo. Speed ESMIT4163 V.92 ESMIT4165 V.92 LsPRI@100kHz Min.(H) D.C.R() PRI/SEC 1:2.0 40 0.250/0.450 1:1.67 30(at10KHz) 0.250/0.325 Turns Ratio STB/FAX/MODEM TRANSFORMER STB/FAX/MODEM TRANSFORMER K DIMENSIONS(mm) MT1910 3.5 [0.138] 10.5MAX. [0.413] 19.6MAX. [0.654] COO XX-XX sumida MIT4040 MIT4040 DOT LOCATES TERMINAL #1 4 1 PRIMARY (LINE) 2 1 3 2 3 12.7 [0.500] PRIMARY (LINE) COO 1 (BOTTOM VIEW) 2 DATE CODE 2 K SCHEMATICS TERMINAL CO (BOTTOM XX-XX sumida SUPPLIER P/N 4 STB/FAX/MODEM TRANSFORMER SUPPLIER NAME 3 16.6MAX. [0.654] K TERMINALLAYOUT STAMP o0.6[0.024] o1.0x4 [o0.039] SECONDARY (MODEM) 1 4 7.6 [0.300] COUNTRY OF ORIGIN FEATURES * V.32 (9.6kbps) THT fax/modem "Dry" Transformer. ("Dry" means un-ability to withstand Current). K SPECIFICATIONS PARAMETERS CONDITIONS MIN TYP MAX Reflected on Primary - 600 - UNITS Ohms With Load on Secondary - 530 - Ohms Total Harmonic Distortion @ 600 Hz, -10 dBm - -80 - dB Insertion Loss Per IEEE method; @ 1000 Hz - 1.00 dB Vrms Impedance 1 Minute 1500 - - Trip Leakage Current - - 200 A Primary Winding - 37 - Ohms Dielectric Rating DC Resistance @ 20, 10 % Secondary Winding - 37 - Ohms DC Current in Primary - - 0 - mADC Turns Ratio Primary to Secondary; 2% - 1:1 - - 59 STB/FAX/MODEM TRANSFORMERS STB/FAX/MODEM TRANSFORMERS MIT-6101/MIT-6225 style K TERMINAL LAYOUT K DIMENSIONS(mm) 2.79 / 3.56 [0.110 / 0.140] (BOTTOM VIEW) 13.97 [0.550] 2 1.52 [0.060] TYP.(4) 3 3 2 4 1 11.43 [0.450] R R sumida MIT-6101 C 23.0 MAX [0.906] 12.0 MAX [0.472] MEXICO XX-XX STB/FAX/MODEM TRANSFORMERS 24.0 MAX [0.945] K SCHEMATICS 1 4 2 3 PRIMARY (LINE) SECONDARY (MODEM) 1 4 TERM NO'S FOR REF. K SPECIFICATIONS Impedance() THD@600Hz PRI:SEC (dB) PartNo. Speed MIT-6101 V.32 600:260 -60.0 MIT-6225 V.34 600:260 -79.0 IL(dB) RL(dB) LL (mH) D.C.R() PRI:SEC DCCurrentPRI (mADC) 3.5 8.0 19.0 170/170 50(Typ) 3.3 10.0 19.0 170/170 50(Typ) MIT-4177 style K TERMINAL LAYOUT K DIMENSIONS(mm) 16.52 MAX (0.650) 3.30 / 4.07 (0.130 / 0.160) 4 R R (BOTTOM VIEW) 6 MIT-4177 C 6 MEXICO XX-XX 16.52 MAX (0.650) PIN SQ = 0.64 [0.025] TYP.(4) 7.6 [0.300] sumida 3 1 1 TERM. NO. 1 K SPECIFICATIONS 60 o1.0 [o0.039] TYP.(4) 4 12.7 [0.500] 11.70 MAX (0.460) Impedance() THD@600Hz PRI:SEC (dB) PartNo. Speed MIT-4177 V.92/V.90 600:301 MIT-3177 V.92/V.90 600:301 K SCHEMATICS IL(dB) RL(dB) LL (mH) DCR() PRI:SEC -95.0 3.0 18.0 7.8 135/135 -92.0 2.6 20.0 3.3 150/150 3 3 4 PRIMARY (LINE) SECONDARY (MODEM) 1 6 STB/FAX/MODEM TRANSFORMERS STB/FAX/MODEM TRANSFORMERS MT1812B K TERMINAL LAYOUT K DIMENSIONS(mm) R R (BOTTOM VIEW) o1.0 X 4 [o0.039] 12.7 [0.500] 4 4 5 1 8 18.3MAX [0.720] MEXICO sumida XX-XX EMIT-400L C 3.20.4 [0.125 0.015] PIN SQUARE = 0.6 MM MAX 12.6MAX [0.496] 5 4 8 1 7.6 [0.300] 5 PRIMARY (LINE) SECONDARY (MODEM) 1 0.3 [0.012] STB/FAX/MODEM TRANSFORMERS 18.3MAX [0.720] K SCHEMATICS 8 INTERCHANGABLE PRIMARY OR SECONDARY K SPECIFICATIONS Impedance() THD@600Hz PRI:SEC (dB) PartNo. Speed EMIT-2001L V.92/V.90 600:560 EMIT-2050L V.92/V.90 600:560 IL(dB) RL(dB) LL (mH) D.C.R() PRI:SEC -93.0 1.2 18.0 16.0 67/67 -87.0 1.55 17.0 17.0 70/70 EMIT-200L V.34 600:560 -85.0 1.6 17.5 17.0 70/70 EMIT-1250L V.34 600:560 -84.0 1.2 18.0 15.7 67/67 EMIT-200L V.32bis 600:560 -74.0 1.5 14.0 12.1 67/67 EMIT-400L V.32bis 600:600 -62.0 1.8 14.0 15.0 70/70 MT1812 FEATURES * Internationally Safety Approved for Reinforced Isolation * EN 60950/BABT/TUV * V.92 (56kbps) to V.32 bis (14.4kbps) encapsulated THT fax/modem transformer K TERMINAL LAYOUT K DIMENSIONS(mm) 12.6 MAX [0.496] 18.3 MAX [0.720] PIN SQ = 0.6 [0.024] TYP.(4) MEXICO R R 4 1 o1.0 [o0.039] TYP.(4) 12.7 [0.500] 5 8 5 4 8 1 7.6 [0.300] (BOTTOM VIEW) 4 PRIMARY (LINE) 1 5 SECONDARY (MODEM) 8 C EMIT-4035L sumida XX-XX 18.3 MAX [0.720] 0.3 [0.012] K SCHEMATICS 3.20.4 [0.125 0.015] K SPECIFICATIONS Impedance() THD@600Hz PRI:SEC (dB) PartNo. Speed EMIT-4035L V.92/V.90 600:420 EMIT-4031L V.32 600:600 IL(dB) RL(dB) LL (mH) D.C.R() PRI:SEC -92.0 1.55 22.0 2.7 82/106 -73.0 1.1 18.0 1.1 55/62 61 LAN PULSE TRANSFORMERS LAN PULSE TRANSFORMERS OUTLINE This is very low profile SMD pulse transformer. This is used whether pulse transformer or common mode choke coil. K DIMENSIONS(mm) CLP42 2.54 1.27 2.5MAX. 0.25 0.5 LAN PULSE TRANSFORMERS 6.5 9.7MAX. 4.6 K DIMENSIONS(mm) CLP82 2.54 1.27 2.5MAX. 0.25 0.5 6.5 9.7MAX. 9.0MAX. K SPECIFICATIONS PartNo. Turnsratio (5%) Inductance (H) Leakageinductance Max.(H) Linecapacitance Max.(pF) D. C. R Max.() CLP42500 1:1 50 0.3 6.0 0.25 CLP42750 1:1 75 0.35 8.0 0.3 1.0 CLP42101 1:1 100 0.3 9.0 0.3 1.1 CLP42151 1:1 150 0.3 10.0 0.3 1.3 CLP42201 1:1 200 0.3 10.0 0.3 1.5 400 0.25 10.0 0.7 1.2 CLP82401 TX:RX 1CT:1CT SPECIFICATIONS TheseareverylowprofileSMDpulsetransformersused in PCMCIAcards. CLP42:Builtineitheronepulsetransformeroronecommon-modechokecoil. CLP82:Builtineithertwoorthreepulsetransformersortwo orthreecommon-modechokecoils. 62 ET-product Min.(SecV) 0.8 10/100 BASE PULSE TRANSFORMERS 10/100 BASE PULSE TRANSFORMERS OUTLINE This is a pulse transformer + filter module for LAN 10/100Base-T (IEEE802.3). CLP11D30 K DIMENSIONS(mm) K SCHEMATICS 11.8 NEW 1.27 1.27 Tx 16 1CT : 1CT 14 3 2 15 7 10 11.4 6.0 9.4 1 : 1 1 3.81 1.27 1.27 0.2 12-0.5 Rx 11 6 (3.05) 1CT : 1CT 10/100 BZSE PULSE TRANSFORMERS 9 8 K LANDPATTERNS(mm) 350H or moref=100kHz, 0.5V Insertion Loss 1.0dB belowf=0.1=100MHz Return Loss 16dB or moref=30MHz Differential to common mode rejection 40dB or moref=30MHz Crosstalk 40dB or moref=30MHz Voltage Isolation AC1650V 6sec. 7.6 f=0.1~100MHz Inductance 0.8 2.6 Operating frequency 2.6 K ELECTRICALSPECIFICATIONS 3.81 P2-1.27 P2-1.27 9.69 K DIMENSIONS(mm) K SCHEMATICS RD+ 1 6.9MAX. 12.9MAX. 11.2 0.55 0.2 9.2 7-2.54 CLP236 23.5MAX. RD- 2 CT 7 RX 5 CT 6 RX- 3 TD- 15 11 TX- CT 14 12 CMT TD+ 16 10 TX+ K ELECTRICALSPECIFICATIONS RX TX (0.1100MHz) 1.0dB Max. 1.0dB Max. (0.160MHz) 19dB typ. 18dB typ. (60100MHz) 14dB typ. 14dB typ. Differential to common (0.160MHz) 43dB Min. 43dB Min. mode rejection ratio (60100MHz) 40dB Min. 40dB Min. Inductance (100KHZ) Insertion Loss Return Loss Voltage Isolation 350H Min. 1500 Vrms Min. For 1 Minute Turns Ratio Part No. RX TX SD68515 1CT : 1CT 1CT : 1CT SD68517 1CT : 1CT 1CT : 1CT SD49783 1CT : 1CT 1.4CT : 1CT SD1013 1CT : 1CT 1.4CT : 1CT SD49743 1CT : 1CT 2CT : 1CT Thisfiltermoduleisused inLAN10/100BASE-T(IEEE802.3)ofPersonalComputercards. 63 RADIO CONTROL CLOCK ANTENNAS RADIO CONTROL CLOCK ANTENNAS OUTLINE It is the radio controlled clock antenna with capacitor which is already preset for resonant frequency. ACL27 K DIMENSIONS(mm) 28.7 28.0MAX. 5.0 7.3MAX. 6.0MAX.2.0 o5.0 2.0 RADIO CONTROL CLOCK ANTENNAS 22.0 K SPECIFICATIONS ACL80A/B Sensitivity TuningImpedance 40.00.20kHz within 60.00.20kHz within Min. 80k Min. 65k (60dBV/m) (50dBV/m) (40dBV/m) 8.91V (output volt) 11.03V 2.64V 3.26V 0.89V 1.10V K DIMENSIONS(mm) 7.5 14.0 o0.7 10.0 3.0 5.0 60.0 65.0 83.0MAX. ACL27-40 ACL27-60 TuningFrequency 5.0 PartNo. 20.5MAX. 19.5MAX. 7.5 K SPECIFICATIONS PartNo. Spec. No. Inductance Resonant Capacitor Resonant Frequency Suitable IC 40K08S S-074-094 588H 27000pF 40kHz, 60kHz LA1650 Resonant frequencies (40kHz, 60kHz) are preset by suitable inductance and capacitors 64 AUDIO / VIDEO FILTERS AUDIO FILTERS TYPE DIMENSIONS mm 7.3MAX. CONSTRUCTION SPECIFICATIONS 1.2 2.0 2.0 7.3MAX. 0.5 CFB-6 7.5MAX. 6.2 7.6 6.7 6.2 7.6 6.7 5.5 1.0 5.5 3.0 o0.5 11.5MAX. 7.8MAX. 7.8MAX. AUDIO / VIDEO FILTERS FB-7DG 1. By combining 1 to 2 pieces, various kinds of LC filter combinations are possible. CFB-6,CFB2-6 2. Low profile type (7.5 mm Max.) CFB-6,CFB2-6 3. Two capacitors are able to be built in 1coil, therefore an additional capacitor is unnecessary. 4. Surface mounting on PCB and reflow solding is possible CFB-6,CFB2-6 1.2 0.5 1.0 14.0MAX. CFB2-6 7.5MAX. 2.0 2.0 2.7 2.0 2.0 7.3MAX. VIDEO FILTERS DIMENSIONS mm 5.1MAX. 5.2MAX. 10.0MAX. 5.2MAX. 0.4 5.5 14.75MAX. 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 5.2MAX. CY-4T 6.0 1.6 1.6 1.6 1.6 1.6 5.2MAX. CY-4W SPECIFICATIONS 6.0 1.6 1.6 5.0MAX. 5.0MAX. 0.4 CY-4 CONSTRUCTION 1. Filter with shield case 2. From 1 to 3 pieces combinations are possible for low pass, high pass, band pass and delay lines 3. Low profile (H: 5.2MAX mm) 4. Two capasitors are able to be built in 1 coil. 5. Reflow soldering is possible. 0.4 TYPE K SPECIFICATIONS PartsNo. Application Type Electriccharacteristics Impedance Delaytime Attenuation 1.5MHz (at 3.0dB) 320nS at 1.0MHz Min. 23dB (at 3.0 MHz) Min. 40dB (at 5.0 MHz) 1k : 1k 3.81MHz (at 3.0dB) 140nS at 3.0MHz Min. 25dB (at 4.8 MHz) Min. 35dB (at 9.5 MHz) CY-4W 1k : 1k 10MHz (at 2.5dB) 32nS at 0.2MHz Min. 45dB (at 12.2 MHz) Min. 51dB (at 14.3 MHz) 5.06MHz B. P. F. CY-4 1k : 1k 4.85MHz (at 3.0dB) 5.25MHz (at 3.0dB) -- Min. 20dB (at 3.8 MHz) Min. 17dB (at 6.3 MHz) 2567-034 4.21MHz B. P. F. CY-4 1k : 1k 4.01MHz (at 2.5dB) 4.41MHz (at 2.5dB) -- Min. 25dB (at 2.94MHz) Min. 17dB (at 5.47MHz) 2570-T007 10.7MHz B. P. F. CY-4T 330 : 330 10.2MHz (at 2.5dB) 11.2MHz (at 2.5dB) 720nS at 10.7MHz Min. 15dB (at 9.7MHz) 2569-T017 3.58MHz B. P. F. CY-4W 1k : 1k 2.46MHz (at 3.0dB) 4.7MHz (at 3.0dB) 187nS at 3.58MHz Min. 15dB Min. 17dB (at 1.0MHz) (at 7.0MHz) Rin:Rout 1.5MHz L. P. F. CY-4 1k : 1k 2569-T033 3.81MHz L. P. F. CY-4W 2569-T021 10MHz L. P. F. 2567-026 2567-021 CutoffFreq 65 IFT IFT 2.2MAX. 1.2 3.8MAX. 0.5 3.5 0.8 4.5MAX. 3.50.2 6.1MAX. 3.7 6.20.2 0.80.2 5.5MAX. 5.9MAX. 0.5 0.9 6.2 4.5MAX. 1.6 5.1MAX. 2.5 o0.4 4.5MAX. 6.5MAX. 3.0 8.0MAX. 6.1MAX. 2.8 66 0.8 7.5 4.5 4.5 3.0 o0.5 8.7MAX. 7.6MAX. 1.0 PG78 6.0 3.5 3.5 6.1MAX. o0.4 PG57 5.8 3.5 1.05 5.9MAX. o0.4 5.9MAX. Inductance : Max. 680H Operation Freq. : Max. 25MHz Variable range of L : L3% 5.0 3.0 0.7 5.1MAX. P-5DJ Inductance : Max. 680H Operation Freq. : Max. 25MHz Variable range of L : L3% 0.7 4.8MAX. P-4SB Inductance : Max. 1mH Operation Freq. : Max. 15MHz Variable range of L : L3% 5.0 1.5 1.5 3.5 4.8MAX. o0.4 P-4SC Inductance : Max. 1mH Operation Freq. : Max. 20MHz Variable range of L : L3% 3.5 5.9MAX. CP55 Inductance : Max. 800H Operation Freq. : Max. 15MHz Variable range of L : L2% 3.0 6.1MAX. 7.6MAX. IFT CP54 Inductance : Max. 246H Operation Freq. : Max. 15MHz Variable range of L : L1.5% 6.2 5.9MAX. 5.9MAX. CP53 SPECIFICATIONS 3.4 1.5 1.5 3.8 5.7 0.4 CONSTRUCTION 3.0 5.1MAX. 5.1MAX. CP-4LB DIMENSIONS mm 0.50.1 TYPE Inductance : 1H - 680H Operation Freq. : Max. 20MHz Variable range of f & L : f2%, L4% Internal capacitors : Max. 470pF Good reliability characteristic Hi Q type Inductance : 1H - 820H Operation Freq. : Max. 20MHz Variable range of f & L : f2%, L4% Internal capacitors : Max. 470pF Inductance : 1H - 820H Operation Freq. : Max. 20MHz Variable range of f & L : f2%, L4% Internal capacitors : Max. 430pF RF COILS RF COILS TYPE 2.4MAX. 5.7MAX. CONSTRUCTION 0.7 0.7 3.2 3.0 0.4 0.8 3.8MAX. 5.9MAX. 0.8 3.50.2 3.7 0.80.2 Inductance : Max. 5H Operation freq. : Max. 150MHz Variable range of L : L1% 3.5 5.5MAX. 0.5 0.9 6.2 5.9MAX. 5.9MAX. CS55 Inductance : Max. 5H Operation freq. : Max. 150MHz Variable range of L : L1% 6.20.2 5.2 4.5MAX. 5.9MAX. CS54 3.5 6.2 0.5 5.9MAX. 5.9MAX. Inductance : Max. 1.0H Operation freq. : Max. 300MHz Variable range of L : L2% 1.0 1.0 4.5MAX. RF COILS CS53 Inductance : Max. 1.5H Operation freq. : Max. 150MHz Variable range of L : L1% 0.50.1 5.2MAX. 5.1MAX. CS-4 SPECIFICATIONS 3.5 0.5 5.7MAX. CS-5LN DIMENSIONS mm Inductance : Max. 5H Operation freq. : Max. 150MHz Variable range of f : f1% Internal capacitors : Max. 100pF 3.7 6.1MAX. 5.8 3.6 2.5 S-5CL3 5.9MAX. 7.9MAX. 3.6 2.8 5.8 3.6 0.8 5.9MAX. o0.4 5.9MAX. 0.8 5.9MAX. S-5LF 3.6 5.9MAX. o0.4 S-5LE 5.8 3.6 2.5 3.0 Inductance : Max. 1.0H Operation freq. : Max. 300MHz Variable range of f & L : f2%, L4% Internal capacitors : Max. 56pF Inductance : Max. 30H Operation freq. : Max. 300MHz Variable range of f & L : f2%, L4% Internal capacitors : Max. 56pF 4.5 4.5 8.5MAX. 1.0 7.6MAX. 7.8MAX. S-7LC o0.5 o0.4 3.6 5.9MAX. 0.8 7.7MAX. Inductance : 0.1H - 1.0H Operation freq. : Max. 300MHz Variable range of L : L4% Inductance : 0.1H - 10H Operation freq. : Max. 300MHz Variable range of f & L : f2%, L4% Internal capacitors : Max. 100pF 67 QUADRATURE DETECTOR COILS, VCO COIL, HELICAL FILTER, ANTENNA LOADING COIL QUADRATURE DETECTOR COILS QU57 K DIMENSIONS(mm) K SPECIFICATIONS 8.2MAX. 2.5 2.6 0.8 6.1MAX. K DIMENSIONS(mm) 7.8MAX. 8.0MAX. 3.0 4.5 o0.5 4.5 7.6MAX. Inductance : 0.1H - 25H Operation freq. : Max. 30MHz Variable range of f : f1% Internal capacitors : Max. 100pF High Stability Low temperature coefficient VCO COIL SM76 K DIMENSIONS(mm) 6.8 K SPECIFICATIONS(REFERENCE) 7.9 7.8MAX. 4.5 3.0 TuningCapacitanceRange 10.5pF2%overvariable (1-2) UnloadedQ (at200MHz) 147(at200MHz) 3.3 0.5 1.0 4.5 7.3 MaximumTurn31/2 T(o0.5) HELICAL FILTER K DIMENSIONS(mm) 7.0 3.1 3.2 4 3 Attenuation F080MHz Min.25dB Attenuation F080MHz Min.19dB Insertion Loss Max.3.5dB Ripple in Passband Max.1dB 3.2 1 2.2 11.5MAX. 7 8 5 Center Frequency (F0) 480MHz 1dB Bandwidth at F0 Min.18MHz 4-0.8 6.3MAX. 6 8-0.6 6.0MAX. 0.6 K SPECIFICATIONS 5.65 CH56W 2 ANTENNA LOADING COIL K DIMENSIONS(mm) 68 K SPECIFICATIONS High inductance type used in LW band with high sensitivity (0.5) 2.5 2.2 7.0MAX. 0.35 5.95MAX. 0.8 MG56 5.95MAX. QUADRATURE DETECTOR COILS, VCO COIL, HELICAL FILTER, ANTENNA LOADING COIL Inductance : 0.1H - 25H Operation freq. : Max. 15MHz Variable range of f : f1% Internal capacitors : Max. 100pF Low temperature coefficient K SPECIFICATIONS 1.0 QU-7L 6.0 1.8 1.8 o0.4 1.5MAX. 6.1MAX. MOLD COILS, BALUN MOLD COILS 8.0MAX. o6.5MAX. 4.0 3.5 o4.8MAX. 9.0MAX. SPECIFICATIONS Inductance : 0.05H - 0.1H Operation Freq. : Max. 200MHz Variable range of L : L3% 7.5 4.0 Inductance : 0.05H - 0.13H Operation Freq. : Max. 200MHz Variable range of L : L3% 6.5 8.5MAX. FEM-85B o2.6 10.0MAX. 2.0MAX. CONSTRUCTION o0.5 FEM-10BL DIMENSIONS mm o0.5 TYPE MOLD COILS, BALUN FEM-7BLN 9.5MAX. 3.3 4.5 Inductance : 0.05H - 0.1H Operation Freq. : Max. 200MHz Variable range of L : L3% 4.5 7.5MAX. o0.5 7.5MAX. BALUN TYPE 5.05MAX. 2.8 CONSTRUCTION SPECIFICATIONS 3.8MAX. 5.5MAX. 3.2 2.5MAX. 0.5 2.7 Operation Freq. : 100kHz - 1GHz 6.5MAX. 5.5MAX. 2.6 5.95MAX. 3.5 Operation Freq. : Max. 500MHz 1.75 1.75 3.15MAX. 0.5 0.5 6.4 9.55MAX. Operation Freq. : 100kHz - 1GHz 0.5 CBM63 3.5 o0.4 6.5MAX. BM-6N 3.0 4.4MAX. CBM42 Operation Freq. : 50MHz - 1GHz 2.54 4.0MAX. 0.4 CBM33 DIMENSIONS mm 69 FIXED INDUCTORS FOR TAPE RECORDER FIXED INDUCTORS FOR TAPE RECORDER TYPE 6.1MAX 2.0 10.0 3.5 Inductance : Max. 10mH Operation Freq. : Max. 500kHz Max. operation power : 300mW(100kHz) 610mW(200kHz) 910mW(300kHz) o8.0 o10.0 36 FIXED INDUCTORS FOR TAPE RECORDER 70 SPECIFICATIONS 2.0 o0.5 MC-102 0.5 7.0 6.0 6.2MAX. CONSTRUCTION 8.7MAX. CMS65 DIMENSIONS mm Inductance : Max. 80mH Operation Freq. : Max. 400kHz VARIABLE INDUCTORS VARIABLE INDUCTORS TYPE 7.3MAX. CONSTRUCTION 11.0MAX. Inductance : Max. 4.5mH Operation freq. : Max. 250kHz Variable range of L : L5% 4.5 o0.5 7.7 4.5 4.5 3.5 MC-129J o13.0MAX. 4.5 4.5 1.0 3.5 1.5 16.0MAX. 3.5 Inductance : Max. 100mH Operation freq. : Max. 500kHz Variable range of L : L5% 7.0 7.0 14.0MAX. o0.7 11.0MAX. 11.0MAX. M-10B Inductance : Max. 27mH Operation freq. : Max. 500kHz Variable range of L : L8% 4.5 Inductance : Max. 20mH Operation freq. : Max. 500kHz Variable range of L : L10% 7.0 7.0 3.0 o0.5 9.0MAX. o0.7 7.8MAX. 7.8MAX. MG78 1.0 8.2MAX. o0.5 8.2MAX. 3.0 1.0 7.8MAX. 7.0MAX. VARIABLE INDUCTORS M-8G Inductance : Max. 27mH Operation freq. : 10 - 250kHz Variable range of L : L10% 1.3 4.0 7.3MAX. M-7GLB 7.8MAX. SPECIFICATIONS 7.6 6.2 1.2 6.5MAX. 0.5 CMG65 DIMENSIONS mm Inductance : Max. 82mH Operation freq. : Max. 250kHz Variable range of L : L10% 71 Gas Discharge Tube TM - SWITCHING SPARK GAPS OUTLINE Gas Discharge Tube SparctubeTM is a range of switching spark gaps designed specifically for voltage controlled switching of capacitive discharge circuits, where a high energy, low loss, and a fast rate of switching is required. Ideally suited to applications where a capacitive discharge is utilised with a transformer to obtain pulses of very high voltage levels in the order of several thousand volts. APPLICATIONS Igniters for Architectural and Automotive Xenon discharge lamps Ignition of Ultra High Pressure Gas Discharge Lamps for Data and Video Projectors Electronic Igniters for Gas Heating and Gas Domestic Appliances, e.g. Cookers Ignition Control for Plasma Discharge Welders TYPICALDATA Product Voltage Range ....................................220 - 2000V Switching Time......................................................< 50ns Switching Current ................................................< 1000A Energy Per Discharge ..........................................< 200mJ Service Life (operations) ....................................> 200,000* Arc Voltage ......................................................10 - 100V FEATURES Fast Switching Rate High Energy Low Loss Capability Wide Operating Temperature Range Excellent Service Life High Insulation Resistance Small Size Rugged Ceramic Metal Construction Non Radioactive K SPECIFICATIONS ProductCode SwitchingVoltage InsulationResistance Capacitance OperatingTemperature ST 0220 220V <400Hz >100 M <2 pF -40 ~ +160 C ST 0350 350V <400Hz >100 M <2 pF -40 ~ +160 C ST 0400 400V <400Hz >100 M <2 pF -40 ~ +160 C ST 0600 600V <400Hz >100 M <2 pF -40 ~ +160 C ST 0800* 800V <400Hz >100 M <2 pF -40 ~ +160 C ST 1000 1000V <400Hz >100 M <2 pF -40 ~ +160 C ST 2000 2000V <400Hz >100 M <2 pF -40 ~ +160 C *ST 0800 is available with a service life > 1,000,000 switchings. SparctubeTM is a trademark of Jensen Devices AB. 72 SwitchingFrequency Gas Discharge Tube TM - SWITCHING SPARK GAPS BASICAPPLICATIONCIRCUIT Gas Discharge Tube MECHANICALDIMENSIONS 0 8. 1.00 0 .1 0 +0 .3 0 -0 Min 28 0 .1 0 +00.3 00 6.000.20 8. 6.000.20 Outline(L) Outline(C) ORDERINGINFORMATION ST XXXXX X X - STD Packaging Switching Voltage 0220 0350 0400 0600 0800 1000 2000 = = = = = = = 220V 350V 400V 600V 800V 1000V 2000V T = Tape & Reel B = Bulk Outline Options L = Leads C = No Leads Tolerance A = 15% B = 12% SparctubeTM is a trademark of Jensen Devices AB. 73 Dimensions for embossed tape and reel packing with packed QTY Dimensions for embossed tape and reel packing with packed QTY Tape Dimensions (mm) 4.0 o1.5 I D A E F 2.0 C H B DIMENSION(mm) TYPE Dimensions for embossed tape and reel packing with packed QTY CAS14D26 CBM33 CBM42 CBM63 CDBM7D28 CDC5D23 CDEP104(L.S) CDEP105(L.S.H) CDEP134(H) CDEP149 CDPH4D19F CDR7D28MN CDRH103R CDRH104R CDRH105R CDRH124 CDRH125 CDRH127 CDRH127/LD CDRH2D11 CDRH2D14 CDRH2D18/HP CDRH2D18/LD CDRH3D16 CDRH3D16/HP CDRH3D16/LD CDRH3D28 CDRH3D28/LD CDRH4D16F/LD CDRH4D18 CDRH4D18C CDRH4D18C/LD CDRH4D22 CDRH4D28 CDRH4D28C CDRH4D28C/LD CDRH5D16F/LD CDRH5D18 CDRH5D28 CDRH5D28R CDRH6D12 CDRH6D26 CDRH6D28 CDRH6D38 CDRH8D28 CDRH8D38 CDRH8D43 CEE156 CEE-78 CEE93 CEE94 CEE98 CEI120 CEI122(H) CEI-128 CEP123 74 QYT A B C D E F H I 24.0 12.0 12.0 16.0 16.0 12.0 24.0 24.0 24.0 24.0 12.0 16.0 24.0 24.0 24.0 16.0 24.0 24.0 24.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 8.0 8.0 8.0 8.0 4.0 8.0 16.0 16.0 16.0 24.0 8.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 24.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 5.6 4.4 4.8 6.1 5.1 6.0 10.5 10.5 14.1 15.1 5.1 7.6 10.4 10.4 10.4 12.4 12.4 12.4 10.0 3.3 3.3 3.3 3.3 4.3 4.3 4.3 4.3 4.3 4.6 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.5 6.0 6.0 6.3 6.8 7.1 7.1 7.1 10.5 8.2 10.5 16.9 9.0 11.0 11.0 11.0 14.0 12.9 14.0 12.9 15.0 5.6 5.8 10.3 8.1 6.0 10.5 10.5 14.1 15.1 5.1 7.6 10.4 10.4 10.4 12.4 12.4 12.4 12.4 3.3 3.3 3.3 3.3 4.3 4.3 4.3 4.3 4.3 4.6 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.5 6.0 6.0 6.4 6.8 7.1 7.1 7.1 8.2 8.2 8.2 15.4 9.7 12.0 12.0 12.0 15.1 12.9 15.1 12.9 11.5 5.5 5.5 7.5 7.5 5.65 11.5 11.5 11.5 11.5 5.65 7.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.65 5.65 5.65 5.65 5.6 5.65 5.65 5.5 5.65 5.65 5.65 7.5 7.5 7.5 7.5 7.5 7.5 7.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 1.75 1.75 1.75 1.75 1.75 1.50 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.50 1.50 1.50 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 3.0 3.3 2.8 3.3 3.1 2.6 5.8 5.8 5.2 10.3 2.1 3.3 3.1 4.1 5.1 4.5 6.0 7.9 7.9 1.3 1.6 2.1 2.1 1.9 1.9 1.9 3.1 3.1 2.05 2.1 2.1 2.1 2.5 3.1 3.1 3.1 2.05 2.1 3.1 3.1 1.7 3.1 3.1 4.1 3.1 4.1 4.7 7.1 6.1 4.6 4.6 6.1 6.1 3.6 6.1 3.6 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.4 0.5 0.4 (PCS/Reel) 2000 500 500 500 2000 2000 500 500 500 250 1000 1000 1000 1000 500 500 500 500 500 1500 1000 1000 1000 1000 1000 1000 500 500 1000 1000 1000 1000 2000 2000 2000 2000 1000 2000 2000 2000 1000 1500 1500 1000 1000 1000 500 300 500 500 500 500 500 1000 500 1000 Dimensions for embossed tape and reel packing with packed QTY TYPE 24.0 24.0 44.0 24.0 16.0 24.0 32.00 16.00 16.0 24.0 24.0 24.0 24.0 12.0 12.0 16.0 16.0 16.0 24.0 24.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 12.0 12.0 12.0 16.0 16.0 24.0 24.0 24.0 12.0 12.0 12.0 16.0 12.0 12.0 12.0 12.0 12.0 24.0 24.0 QYT B C D E F H I (PCS/Reel) 16.0 16.0 36.0 16.0 12.0 12.0 16.0 8.0 12.0 16.0 16.0 20.0 20.0 8.0 8.0 12.0 12.0 12.0 16.0 16.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 12.0 12.0 8.0 12.0 12.0 8.0 12.0 16.0 12.0 16.0 8.0 8.0 8.0 12.0 8.0 12.0 12.0 8.0 8.0 8.0 8.0 13.0 12.9 26.1 11.0 7.1 8.2 13.4 5.2 9.2 11.9 11.9 12.4 14.9 5.0 6.0 8.0 7.1 8.0 11.4 13.8 5.1 5.1 5.1 6.2 6.2 6.0 6.0 4.5 4.5 5.9 5.9 7.3 7.1 5.2 7.0 7.0 5.9 8.3 10.4 9.5 10.4 3.75 4.4 5.7 7.4 5.1 7.0 7.0 5.6 5.5 6.4 6.4 13.0 12.9 30.6 12.8 8.2 13.9 23.5 9.8 9.8 10.9 10.9 14.0 17.0 5.2 6.4 7.1 8.0 9.9 11.4 14.7 5.1 5.1 5.1 6.2 6.2 7.0 7.0 5.9 5.9 7.5 7.5 8.0 8.2 6.4 6.0 6.0 9.5 9.3 14.2 10.4 10.4 4.1 4.9 6.2 8.2 5.1 6.0 6.0 5.6 6.5 14.75 11.1 11.5 11.5 20.2 11.5 7.5 11.5 14.2 7.5 11.5 11.5 11.5 11.5 11.5 5.5 5.5 7.5 7.5 7.5 11.5 11.5 5.5 5.5 5.5 5.65 5.65 5.5 5.5 5.5 5.5 7.5 7.5 7.5 7.5 5.5 5.5 5.5 7.5 7.5 11.5 11.5 11.5 5.5 5.5 5.5 7.5 5.65 5.5 5.5 5.65 5.5 11.5 11.5 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.5 1.5 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.50 1.75 1.75 1.50 1.75 1.75 1.75 5.8 4.1 10.1 6.3 7.6 7.6 7.0 2.6 2.6 3.1 4.6 3.1 3.5 3.3 2.6 3.1 3.1 3.1 5.1 6.1 1.5 1.5 1.7 1.5 1.7 1.5 1.7 1.5 1.7 1.5 1.8 1.5 6.6 3.3 4.3 6.0 4.6 5.5 3.2 5.9 4.2 3.0 3.5 5.0 5.5 4.6 4.3 6.0 2.6 5.3 5.2 5.2 0.4 0.4 0.4 0.5 0.5 0.5 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 500 1000 100 500 500 500 500 500 500 1000 500 500 500 1500 1500 1500 1500 1000 500 500 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 2000 500 500/2000 1000 750 1000 1000 1000 500 1000 2000 1500 1500 1000 500/1500 1000 750 500/2500 1000 1000 1000 Dimensions for embossed tape and reel packing with packed QTY CEP125(H,U) CEP12D38 CEPH199 CER95 CFB-6 CFB2-6 CLP236 CLP42 CLP82 CLQ102 CLQ104 CLQ122 CLQ143 CLQ4D27 CLQ52 CLQ72 CLQ72B CLQ7D27 CLS10 CLS12 CLS4D09 CLS4D11 CLS4D14 CLS5D11 CLS5D14 CMD4D06 CMD4D08 CMD4D11 CMD4D13 CMD5D11 CMD5D13 CMD6D11B CMG65 CP-4LB CP53 CP55 CPFC74 CPFC85 CPU9D25 CR105 CR10D37 CR32 CR43 CR54 CR75 CS-4 CS53 CS55 CS-5LN CY-4 CY-4T CY-4W DIMENSION(mm) A 75 HEAD OFFICE Sumida Electric Co., Ltd. 3-3-6, Nihonbashi-Ningyocho, Chuo-ku, Tokyo, Japan, 103-8589 TEL. +81-3-3667-3302 FAX. +81-3-3667-3408 OVERSEAS SALES OFFICES Sumida Trading Company Limited 14 / F., Eastern Centre, 1065 King's Road, Quarry Bay, Hong Kong TEL. +852-2880-6688 FAX. +852-2565-9600 E-mail : sales@hk.sumida.com Sumida Trading Company Limited (Munich Office) Stefan-George-Ring 29, Munich, D-81929 Germany TEL. +49-89-930-86161 FAX. +49-89-930-86422 E-mail : sales@eu.sumida.com Taiwan Sumida Electronics Inc. (Taiwan Head Office) 171 Fu Teh St., Hsin-I, Taipei,Taiwan R.O.C. TEL. +886-22726-2177 FAX. +886-22728-2726 E-mail : sales@tw.sumida.com Taiwan Sumida Electronics Inc. (Tainan Office) Room B, 5F, Shan-Hua Building, No. 291 Ta-Cheng Road, Shan-Hua, Tainan County, Taiwan 741 TEL. +886-6-5834836 FAX. +886-6-5834768 E-mail : sales@tw.sumida.com Taiwan Sumida Electronics Inc. (Hsinchu Office) Room2, 10F, No.537 Sec.2, Kuang Fu Road, Hsinchu, Taiwan R.O.C. TEL. +886-3561-0554 FAX. +886-3561-0564 E-mail : sales@tw.sumida.com Dongguan Sumida (Taiping) Electric Co., Ltd. (Shenzhen Sales Office) Room 3905, Block A, United Plaza, 5022 Binhe Road, Futian District, Shenzhen, Guangdong, PRC, 518026 TEL. +86-755-82910228 FAX. +86-755-82910338 E-mail : shenzhen.sales@cn.sumida.com Suzhou Sumida Electric Co., Ltd. No.15 Dongxing Road, Loufeng Sub-district, Suzhou Industrial Park, Suzhou, Jiangsu, China PRC 215021 TEL. +86-512-6760-9280 FAX. +86-512-6760-9512 E-mail : suzhou.sales@cn.sumida.com Sumida Europe S.A. Chaussee de Tervuren 113A, B-1160 Brussels, Belgium TEL. +32-2673-9565 FAX. +32-2672-0454 E-mail : sales@eu.sumida.com Sumida Trading Pte Limited 996 Bendemeer Road. #04-05 to 06, Singapore 339944 TEL. +65-6296-3388 FAX. +65-6296-3390 E-mail : sales@sg.sumida.com SMD Marketing (M) Sdn. Bhd. (Malaysia Head Office) Suite 704 Level 7, Menara, Apex, Off Jalan Semenyih, Bukit Mewah, 43000 Kajang, Selangor Darul Ehsan, Malaysia TEL. +60-3-8733-0900 FAX. +60-3-8737-7384 E-mail : sales@my.sumida.com SMD Marketing (M) Sdn. Bhd. (Penang Office) Unit 2-08A, Choo Plaza, 41 Lorong Abu Siti, 10400 Penang, Malaysia TEL. +60-4-228-3505, 229-2650 FAX. +60-4-229-8512 E-mail : sales@my.sumida.com Sumida America Inc. (U.S.A. Head Office) 1701 West Golf Road, Tower 3, Suite 400, Rolling Meadows, Illinois, IL 60008 U.S.A. TEL. +1-847-545-6700 FAX. +1-847-545-6720 E-mail : sales@us.sumida.com Sumida America Inc. (San Jose Office) 2841 Junction Ave., Suite 120, San Jose, CA 95134, U.S.A. TEL. +1-408-321-9660 FAX. +1-408-321-9308 E-mail : sales@us.sumida.com Sumida America Inc. (Detroit Office) Suite 100, 320 East Big Beaver Road, Troy, MI 48084 U.S.A. TEL. +1-248-528-0095 FAX. +1-248-528-0360 E-mail : sales@us.sumida.com Jensen Devices AB Rudbecks Vag 143, 192 51 Sollentuna, Sweden TEL. +46-(0)8-928895 FAX. +46-(0)8-963315 E-mail : info@jensendevices.com Jensen Devices AB(Belgium Office) Industrieweg Noord 1118 Box 8, 3660 Opglabbeek, Belgium TEL. +32-89-791877 FAX. +32-89-791876 E-mail : info@jensendevices.com is a registered trademark of SUMIDA CORPORATION, and may not be used by you without prior written approval. AGENT This catalog was printed using recycled paper. Printed in Japan 2004.9