Through Hole Current Sense Transformers VDE Approved Meet IEC950 insulation requirements 4250VRMS primary to secondary breakdown voltage Frequency range 10kHz to 200kHz V DE Electrical Specifications @ 25C - Operating Temperature -40C to +130C Part Number IPK (Amps) RT () Droop (%) KVI (Volt/Amp) LS (mH MIN) DCR RS (MAX) Turns (NS 1%) KB KCL PE-67050NL 35 15 2.4 0.30 5.0 0.70 50 .269 x 106 51.2 x 10-6 .95 100 .0671 x 10 6 1.56 x 10 -6 .85 .0168 x 10 6 -9 47.3 x 10 .82 -9 .84 PE-67100NL 37 PE-67200NL 56 38 PE-67300NL 200 37 510 2.2 0.56 2.0 1.00 2.2 1.70 Notes: 1. These current sense transformers have a 1 turn primary winding, secondary turns (Ns) as indicated in the table, and a 130C insulation system. 2. The reference values are for unipolar operation, 50kHz, 40% duty factor, and an estimated 55C temperature rise. 3. The maximum useable peak sense current (IPK) depends on the temperature rise or core saturation, which should be evaluated for the operating conditions. 4. These Current Sense Transformers are recommended for switch mode power supply applications, unipolar or bipolar, operating at frequencies from 10kHz to 200kHz. 5. The maximum recommended operating flux density (BOP) is 2000 gauss to prevent saturation at an operating temperature of 105C. 20 80 180 1.40 4.50 11.0 200 300 .00746 x 10 0 4 4 6.13 x 10 6. The core loss factor (KCL) is valid from 10kHz to 200kHz at 105C. 7. The terminating resistor (RT) may be varied to adjust operating flux (BOP), droop, or scale factor (KVI). 8. The scale factor (KVI) is proportional to the terminating resistor (RT) and is equal to 1 volt/amp when RT=NS. 9. The secondary inductance (LS) is measured at 15kHz and .5V for PE-67050, 1V for PE-67100, 2V for PE-67200 and 3V for PE-67300. Mechanical PE-XXXXXNL 6 REQ (m) Schematic 3 0 1 1 TURN 2 NS TURNS 4 Parts per package ............................80 Inches mm .010 Unless otherwise specified, all tolerances are 0,25 Dimension: For More Information Pulse Worldwide Headquarters 12220 World Trade Drive San Diego, CA 92128 U.S.A. Pulse Europe Einsteinstrasse 1 D-71083 Herrenberg Germany Tel: 858 674 8100 Fax: 858 674 8262 Tel: 49 7032 78060 Fax: 49 7032 7806 135 Pulse China Headquarters B402, Shenzhen Academy of Aerospace Technology Bldg. 10th Kejinan Road High-Tech Zone Nanshan District Shenzen, PR China 518057 Tel: 86 755 33966678 Fax: 86 755 33966700 Pulse North China Room 2704/2705 Super Ocean Finance Ctr. 2067 Yan An Road West Shanghai 200336 China Pulse South Asia 135 Joo Seng Road #03-02 PM Industrial Bldg. Singapore 368363 Tel: 86 21 62787060 Fax: 86 2162786973 Tel: 65 6287 8998 Fax: 65 6287 8998 Pulse North Asia 3F, No. 198 Zhongyuan Road Zhongli City Taoyuan County 320 Taiwan R. O. C. Tel: 886 3 4356768 Fax: 886 3 4356823 (Pulse) Fax: 886 3 4356820 (FRE) Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2015. Pulse Electronics, Inc. All rights reserved. 1 pulseelectronics.com P577.C (03/15) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Pulse: PE-67200 PE-67300 PE-67050 PE-67100 PE-67200NL PE-67100NL PE-67050NL PE-67300NL