Surface Mount Switching Diode Features: * * * * Fast Switching Speed Surface Mount Package Ideally Suited for Automatic Insertion For General Purpose Switching Applications High Conductance Applications: High speed switching application Max. Rating @ Ta = 25C unless otherwise specified Characteristic Symbol Value Unit Repetitive peak reverse voltage Vrm 85 V DC reverse Voltage Vr 75 V Forward continuous current If 250 mA Ifsm 4.5 A Pd 370 mW Rja 375 C/W Tj 150 C Tstg -65 to +150 C Non-Repetitive peak forward surge current @t= 1.0s Power dissipation Ts = 54C Thermal resistance junction to ambient air Operating junction temperature range Storage temperature range Electrical Characteristics @ Ta = 25C unless otherwise specified Characteristic Reverse breakdown voltage Symbol Min. Typ. Max. Unit V(br)r 75 - - V Ir=100A V If = 1mA If = 10mA If = 50mA If = 150mA Forward voltage Vf - - 0.715 0.855 1 1.25 Reverse leakage current Ir - - 1 A Vr = 70V Junction capacitance Cj - - 2 pF Vr =0V, f = 1MHz Reverse recovery time trr - - 6 ns If = Ir = 10mA, Rl=100 www.element14.com www.farnell.com www.newark.com Page <1> 26/02/13 V1.0 Surface Mount Switching Diode Typical Characteristics @ Ta=25C unless otherwise specified www.element14.com www.farnell.com www.newark.com Page <2> 26/02/13 V1.0 Surface Mount Switching Diode Plastic surface mounted package Soldering Footprint Package Information Device Package Shipping BAS16-7-F SOT-23 3,000 / Tape & Reel Part Number Table Description Part Number Surface Mount Switching Diode BAS16-7-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 26/02/13 V1.0