JGD FR101(L)G tHrRu FR107(L)G 1.0 AMP. GLASS PASSIVATED FAST RECOVERY RECTIFIERS VOLTAGE RANGE -iii- 50 to 1000 Volts CURRENT 1.0 Amperes a FEATURES DO-41 A-405 * Low forward voltage drop - f * High current capability 107(2.7) 1.0(25.4) 407(2.7) 1.0(25.4) * High reliability 080(2.0) MIN. 080(2.0) MIN. DIA. DIA. * High surge current capability Ly bk Ly k MECHANICAL DATA "7 2666.2) 7 9085.2) * Case: Molded plastic 166(4.2) :166(4.2) * Epoxy: UL 94V -0 rate flame retardant ] ] Lead: Axial leads, solderable per MIL ~ STD 202, method 208 guaranteed 1.0(25.4) 1.0(25.4) x Polarity: Color band denotes cathode end .034(.9) MIN 026 (65) _ 2034-9) Le VDD) __, * Mounting Position: Any OBA og * Weight:0.34 grams(0.22grams A- 405) 1 | | | Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% FR FR FR FR FR FR FR TYPE NUMBER SYMBOLS _ {101 (1)4102(L)@108(L)G104(L) 4106 L)Gr06(L) qio7(L)q UNITS Maximum Recurrent Peak Reverse Voltage Vearm 50 100 200 400 600 800 1000 Vv Maximum RMS Voitage Veams 35 70 140 280 420 560 700 Vv Maximum D.C Blocking Voltage Voc 50 100 200 400 600 800 | 1000 Vv Maximum Average Forward Rectified Current \ 1.0 A .376"(9.5mm) lead length @ Ta = 55C FAV) . Peak Forward Surge Current, 8.3 ms single half sine-wave | 30 A superimposed on rated load( JEDEC method) FSM Maximum Instantaneous Forward Voltage at 1.04 Ve 1.3 Vv Maximum D.C Reverse Current @ Ta =25T i 5.0 pA at Rated D.C Blocking Voltage @ Ty = 125C R 100 uA Maximum Reverse Recovery Time( Note! ) Trr 150 | 250 | 500 ns Typical Junction Capacitance (Note 2) Cy 15 pF Operating and Storage Temperature Range Ty, Tstc - 65 to+ 150 c NOTES: 1. Reverse Recovery Test Conditions: Ip =0.5A, In =1.0A, Inn = 0.25A. : 2. Measured at 1 MHz and applied reverse voltage of 4.0V D.C. , e JINAN GUDE ELECTRONIC DEVICE Co., LTD.RATINGS AND CHARACTERISTIC CURVES (FR101(L)G THRU FR107(L)G) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE Single Phase Halt Wave 60 Hz 1 Resistive or Inductive Load Lead AVERAGE FORWARD CURRENT. (A) 50 75 100 125 150 175 AMBIENT TEMPERATURE. (Cc) FIG.3- TYPICAL FORWARD CHARACTERISTICS x = u o INSTANTANEOUS FORWARD CURRENT (A) 3 "FORWARD VOLTAGE. (V) FIG.5- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS FIG.2 MAXIMUM NON REPETITIVE FORWARD SURGE CURRENT 8.3ms Single Sine Wave (JEDEC PEAK FORWARD SURGE CURRENT(A) NUMBER OF CYCLES AT 60 Hz FIG.4 TYPICAL JUNCTION CAPACITANCE = JUNCTION CAPACITANCE. (pF) 500 100 }~<Tar ->| NONINDUCTIVE NONINDUCTIVE +0. AN puT () @) PULSE + 50 Vde IGENERATOR (approx) (NOTE 2) Oo 10 OSCILLOSCOPE w 1 NON. (NOTE 1) INDUCTIVE NOTES: 1 Rise Time=7ns max. Input Impedance= 1 megohm 22pF 2 Rise Time=10ns max. Source Impedance= 50 ohms BASE FOR SET 50/150ns&m JINAN GUDE ELECTRONIC DEVICE CO., LTD.