FLDWC0311 Issue 5 8th February 2012 Specification Control Drawing Page 1 of 2 Page 2 is for internal use only FlexLiteTM DUAL WALL HOOKUP WIRE, TIN PLATED COPPER, RADIATION-CROSSLINKED, MODIFIED POLYALKENE/PVDF INSULATED, 125C, 600 VOLT The complete requirements for procuring the wire described herein shall consist of this document, Test Regime WSD3106(UK) and the requirements of the issue is effect of WCD3106, UL style 3584 and shall carry UL labels to that effect. Primary Insulation Radiation Crosslinked Modified Polyalkene Insulation Thickness: 0.10mm (minimum) 0.127mm (minimum average) Conductor Jacket Tin Plated Copper Part Description FLDWC0311-0.25-* FLDWC0311-0.35-* FLDWC0311-0.50-* FLDWC0311-0.75-* FLDWC0311-1.00-* FLDWC0311-1.50-* FLDWC0311-2.00-* FLDWC0311-2.50-* Radiation Crosslinked Modified (PVDF) Jacket Thickness 0.05mm (minimum) 0.076mm (minimum average) FINISHED WIRE Conductor Nominal Stranding Diameter Maximum Diameter (mm) Nominal Crosslink CSA No./Diam. (mm) Resistance Lower Upper Weight Verification Test (mm) (mm) @20C Spec Target Spec (kg/km) Mandrel Diam. Weight Limit Min. Max. (ohms/km) Limit (mm) (3%) (kg) (3%) 1.12 1.17 1.22 3.45 0.25 19/0.127 0.55 0.63 83.3 13 0.17 1.31 1.37 1.42 4.79 0.35 19/0.15 0.72 0.77 56.1 19 0.17 1.46 1.51 1.56 6.46 0.50 19/0.19 0.86 0.88 40.1 19 0.23 1.65 1.70 1.75 8.93 0.75 19/0.23 1.05 1.08 24.7 25 0.23 1.78 1.85 1.93 10.9 1.00 19/0.25 1.17 1.26 20.0 25 0.23 2.19 2.27 2.34 17.9 1.50 19/0.32 1.35 1.58 13.7 30 0.45 19/0.36 1.66 1.79 9.7 2.42 2.52 2.62 21.3 2.00 38 0.45 19/0.41 1.85 2.01 8.2 2.63 2.73 2.83 27.4 2.50 50 0.68 WIRE RATINGS: Temperature Rating :- 125 C Voltage Rating :- 600 Volts (rms) Flame Rating :- VW1 COLOUR CODE: The '*' in the part number shall be replaced by a standard colour code designator. e.g., FLDWC0311-1.50-9, 1.50mm, white insulation ADDITIONAL Crosslink Verification: REQUIREMENTS: 300 3C/1 hr. as per WCD3106 clause 3.4.7; voltage withstand - 2.5 kV; mandrels & weights as shown above. Insulation Tensile Strength: Insulation Elongation: Thermal Stability: Shrinkage: Insulation Resistance: Spark Test: APPROVAL: Tyco Electronics UK Ltd Faraday Road Dorcan SWINDON SN3 5HH Tel: +44 (0)1793 528171 Fax: +44 (0)1793 572516 17.2N/mm minimum 150% minimum Temperature - 158C; 70% tensile strength & elongation retention 3 mm maximum at each end at 125C/1 hour 1524 Mohm.km minimum 8.0 kV Electronic sign off - no signatures will appear. TE TEConnectivity Connectivityisisaatrading tradingname nameof ofTyco Tyco Electronics ElectronicsUK UKLtd, Ltd,which whichis isregistered registeredin in England Englandand andWales, Wales,number number550926. 550926. Registeredoffice: office:Faraday FaradayRoad, Road,Dorcan, Dorcan, Registered Swindon,SN3 SN35HH 5HH Swindon, Website: www.te.com Website: This drawing and the information set forth hereon are the property of Tyco Electronics UK Ltd, and are to be held in trust and confidence. Publication, duplication, disclosure or use for any purpose not expressly authorised in writing by Tyco Electronics UK Ltd is prohibited. This specification sheet takes precedence over documents referenced herein. As Tyco Electronics UK Ltd. reserve the right to make changes in construction without notice please contact Tyco Electronics UK Ltd to ensure that this document is the latest issue. (c)2012 Tyco Electronics Corporation, A TE Connectivity Ltd. Company. All Rights Reserved.