©2002 Teccor Electronics i http://www.teccor.com
Thyristor Product Catalog +1 972-580-7777
Thyristor
Product
Catalog
Teccor Electronics
1800 Hurd Drive
Irving, Texas 75038
United States of America
Phone: +1 972-580-7777
Fax: +1 972-550-1309
Website: http://www.teccor.com
E-mail: power.techsales@teccor.com
http://www.teccor.com ii ©2002 Teccor Electronics
+1 972-580-7777 Thyristor Product Catalog
Teccor Electronics reserves the right to make changes at any time in order to improve designs and to supply the best products possible.
The information in this catalog has been carefully checked and is believed to be accurate and reliable; however, no liability of any type
shall be incurred by Teccor for the use of the circuits or devices described in this publication. Furthermore, no license of any patent
rights is implied or given to any purchaser.
Teccor Electronics is the proprietor of the QUADRAC® trademark. is a registered trademark of Underwriters Laborato-
ries, Inc. All other brand names may be trademarks of their respective companies. To conserve space in this catalog, the
trademark sign (®) is omitted.
©2002 Teccor Electronics iii http://www.teccor.com
Thyristor Product Catalog +1 972-580-7777
Contents
Product Selection Guide
Product Descriptions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vi
Circuit Requirement Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vii
Product Packages - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - viii
Description of Part Numbers- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - x
Quality and Reliability Assurance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -xii
Standard Terms and Conditions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - xiv
Data Sheets
V-I Characteristics of Thyristor Devices - - - - - - - - - - - - - - - - - - - - - - - - E0-2
Electrical Parameter Terminology - - - - - - - - - - - - - - - - - - - - - - - - - - - - E0-3
Electrical Specifications
Sensitive Triacs- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E1
Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E2
QUADRACs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E3
Alternistor Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E4
Sensitive SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E5
SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E6
Rectifiers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E7
Diacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E8
SIDAC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E9
Mechanical Specifications
Package Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M1
Lead Form Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M2
Packing Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M3
Application Notes
Fundamental Characteristics of Thyristors - - - - - - - - - - - - - - - - - - - AN1001
Gating, Latching, and Holding of SCRs and Triacs - - - - - - - - - - - - - AN1002
Phase Control Using Thyristors- - - - - - - - - - - - - - - - - - - - - - - - - - - AN1003
Mounting and Handling of Semiconductor Devices - - - - - - - - - - - - - AN1004
Surface Mount Soldering Recommendations - - - - - - - - - - - - - - - - - AN1005
Testing Teccor Semiconductor Devices
Using Curve Tracers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AN1006
Thyristors Used As AC Static Switches and Relays - - - - - - - - - - - - AN1007
Explanation of Maximum Ratings and Characteristics for Thyristors - AN1008
Miscellaneous Design Tips and Facts - - - - - - - - - - - - - - - - - - - - - - AN1009
Thyristors for Ignition of Fluorescent Lamps - - - - - - - - - - - - - - - - - - AN1010
Appendix
Cross Reference Guide - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A1
Part Numbers Index- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A27
http://www.teccor.com iv ©2002 Teccor Electronics
+1 972-580-7777 Thyristor Product Catalog
©2002 Teccor Electronics P - 1 http://www.teccor.com
Thyristor Product Catalog +1 972-580-7777
Product Selection Guide
Product Descriptions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 2
Circuit Requirement Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 3
Product Packages - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 4
Description of Part Numbers- - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 6
Quality and Reliability Assurance - - - - - - - - - - - - - - - - - - - - - - - - - P 8
Standard Terms and Conditions - - - - - - - - - - - - - - - - - - - - - - - - - P 10
http://www.teccor.com P - 2 ©2002 Teccor Electronics
+1 972-580-7777 Thyristor Product Catalog(972) 580-7777
Product Descriptions
Thyristors
A thyristor is any semiconductor switch with a bi-stable action
depending on p-n-p-n regenerative feedback. Thyristors are nor-
mally two- or three-terminal devices for either unidirectional or bi-
directional circuit configurations. Thyristors can have many forms,
but they have certain commonalities. All thyristors are solid state
switches that are normally open circuits (very high impedance),
capable of withstanding rated blocking/off-state voltage until trig-
gered to on state. When triggered to on state, thyristors become a
low-impedance current path until principle current either stops or
drops below a minimum holding level. After a thyristor is triggered
to on-state condition, the trigger current can be removed without
turning off the device. Thyristors are used to control the flow of
electrical currents in applications including:
Home appliances (lighting, heating, temperature control, alarm
activation, fan speed)
Electrical tools (for controlled actions such as motor speed, sta-
pling event, battery charging)
Outdoor equipment (water sprinklers, gas engine ignition, elec-
tronic displays, area lighting, sports equipment, physical fitness)
Sensitive Triacs
Teccor's sensitive gate triacs are AC bidirectional silicon
switches that provide guaranteed gate trigger current levels in
Quadrants I, II, III, and IV. Interfacing to microprocessors or other
equipment with single polarity gate triggering is made possible with
sensitive gate triacs. Gate triggering currents of 3 mA, 5 mA,
10 mA, or 20 mA may be specified.
Sensitive gate triacs are capable of controlling AC load currents
from 0.8 A to 8 A rms and can withstand operating voltages from
200 V to 600 V.
Triacs
Teccor's triac products are bidirectional AC switches, capable of
controlling loads from 0.8 A to 35 A rms with 10 mA, 25 mA, and
50 mA IGT in operating Quadrants I, II and III.
Triacs are useful in full-wave AC applications to control AC power
either through full-cycle switching or phase control of current to the
load element. These triacs are rated to block voltage in the “OFF”
condition from 200 V minimum with selected products capable of
1000 V operation. Typical applications include motor speed con-
trols, heater controls, and incandescent light controls.
Quadrac
Quadrac devices, originally developed by Teccor, are triacs and
alternistor triacs with a diac trigger mounted inside the same pack-
age. These devices save the user the expense and assembly time
of buying a discrete diac and assembling in conjunction with a
gated triac.
The Quadrac is offered in capacities from 4 A to 15 A rms and volt-
ages from 200 V ac to 600 V ac.
Alternistor Triacs
The Teccor alternistor is specifically designed for applications
required to switch highly inductive loads. The design of this special
chip effectively offers the same performance as two thyristors
(SCRs) wired inverse parallel (back-to-back).
This new chip construction provides the equivalent of two electri-
cally-separate SCR structures, providing enhanced dv/dt charac-
teristics while retaining the advantages of a single-chip device.
Teccor manufactures 6 A to 40 A alternistors with blocking voltage
rating from 200 V to 1000 V. Alternistors are offered in TO-220,
TO-218, and TO-218X packages with isolated and non-isolated
versions.
Sensitive SCRs
Teccor's sensitive gate SCRs are silicon-controlled rectifiers repre-
senting the best in design, performance, and packaging techniques
for low- and medium-current applications.
Anode currents of 0.8 A to 10 A rms can be controlled by sensitive
gate SCRs with gate drive currents ranging from 12 µA to 500 µA.
Sensitive gate SCRs are ideally suited for interfacing to integrated
circuits or in applications where high current load requirements and
limited gate drive current capabilities exist. Examples include igni-
tion circuits, motor controls, and DC latching for alarms in smoke
detectors. Sensitive gate SCRs are available in voltage ratings to
600 V ac.
SCRs
Teccor's SCR products are half-wave, silicon-controlled rectifiers
that represent the state of the art in design and performance.
Load current capabilities range from 1 A to 70 A rms, and voltages
from 200 V to 1000 V may be specified to meet a variety of appli-
cation needs.
Because of its unidirectional switching capability, the SCR is used
in circuits where high surge currents or latching action is required.
It may also be used for half-wave-type circuits where gate-con-
trolled rectification action is required. Applications include crow-
bars in power supplies, camera flash units, smoke alarms, motor
controls, battery chargers, and engine ignition.
Surge current ratings are available from 30 A in the TO-92 packag-
ing to 950 A in the TO-218X package.
Rectifiers
Teccor manufactures 15 A to 25 A rms rectifiers with voltages
rated from 200 V to 1000 V. Due to the electrically isolated TO-220
package, these rectifiers may be used in common anode or com-
mon cathode circuits using only one part type, thereby simplifying
stock requirements.
Diacs
Diacs are trigger devices used in phase control circuits to provide
gate pulses to a triac or SCR. They are voltage-triggered bidirec-
tional silicon devices housed in DO-35 glass axial lead packages
and DO-214 surface mount packages.
Diac voltage selections from 27 V to 45 V provide trigger pulses
closely matched in symmetry at the positive and negative break-
over points to minimize DC component in the load circuit.
Some applications include gate triggers for light controls, dimmers,
power pulse circuits, voltage references in AC power circuits, and
triac triggers in motor speed controls.
Sidacs
Sidacs represent a unique set of thyristor qualities. The sidac is a
bidirectional voltage triggered switch. Some characteristics of this
device include a normal 95 V to 330 V switching point, negative
resistance range, latching characteristics at turn-on, and a low on-
state voltage drop.
One-cycle surge current capability up to 20 A makes the sidac an
ideal product for dumping charged capacitors through an inductor
in order to generate high-voltage pulses. Applications include light
controls, high-pressure sodium lamp starters, power oscillators,
and high-voltage power supplies.
©2002 Teccor Electronics P - 3 http://www.teccor.com
Thyristor Product Catalog +1 972-580-7777
Circuit Requirement Diagram
BILATERAL VOLTAGE
SWITCH
RECTIFIER REVERSE BLOCKING
THYRISTOR
BIDIRECTIONAL
THYRISTOR
BILATERAL
VOLTAGE TRIGGER
SIDAC * RECTIFIER * DIAC *
GATE CONTROL
DIAC TRIGGER DIRECT
GATE CURRENT
12-500 µA 10-50 mA
SCR *SCR (Sensitive) * QUADRANT OPERATION
(See Quadrant Chart on Data Sheet)
I I I I I I I I I I I I I V
GATE CURRENT
10-100 mA
GATE CURRENT
3-20 mA
SENSITIVE TRIAC *
TRIAC *
OPTIONS
INTERNAL EXTERNAL
DIACS *
QUADRAC *
ALTERNISTOR TRIAC *
* For detailed information, see specific data sheet in product catalog.
http://www.teccor.com P - 4 ©2002 Teccor Electronics
+1 972-580-7777 Thyristor Product Catalog(972) 580-7777
Product Packages
* No center lead on TO-92 Sidacs.
Package Code
Isolated Mounting Tab
GY S C E L K J P
Product
Type
Current
(Amps) DO-15 DO-35 DO-214 Compak TO-92 * TO-220 TO-218 TO-218X
TO-3
Fastpak
Sensitive
Triac
0.8
1
4
6
8
Triac
0.8 ✔✔
1✔✔
4
6
8
10
15
25
35
Quadrac
4
6
8
10
15
Alternistor
6
8
10
12
16
25 ✔✔✔
30
35
40 ✔✔
Sensitive
SCR
0.8
1.5
4
6
8
10
SCR
1 ✔✔
6
8
10
12
15
16
20
25
35 ✔✔
40
55
65 ✔✔
70
Rectifier
15
20
25
Diac ✔✔
Sidac *
©2002 Teccor Electronics P - 5 http://www.teccor.com
Thyristor Product Catalog +1 972-580-7777
Product Packages
Non-isolated Mounting Tab
Package Code
FRMWDVN
TO-202 TO-220 TO-218 TO-218X
TO-252
D-Pak
TO-251
V-Pak
TO-263
D2Pak
Current
(Amps)
Product
Type
0.8
Sensitive
Triac
1
4
6
8
0.8
Triac
1
✔✔ 4
✔✔ 6
✔✔ 8
✔✔ 10
15
25
35
4
Quadrac
6
8
10
15
✔✔✔ 6
Alternistor
✔✔✔ 8
10
12
16
25
30
35
40
0.8
Sensitive SCR
1.5
4
6
8
10
1
SCR
✔✔ 6
✔✔ ✔✔ 8
✔✔ ✔✔ 10
✔✔12
15
16
20
25
35
40
✔✔✔ 55
65
70
15
Rectifier
20
25
Diac
Sidac
http://www.teccor.com P - 6 ©2002 Teccor Electronics
+1 972-580-7777 Thyristor Product Catalog(972) 580-7777
Description of Part Numbers
Sensitive Triac
Quadrac
Sensitive SCR
Triac and Alternistor
L20 04 F5
12
Device Type
L = Sensitive Triac
Voltage Rating
20 = 200 V
40 = 400 V
60 = 600 V
Current Rating
Package Type
Blank =
Compak
(Surface Mount)
D = TO-252 (Surface Mount)
E = TO-92 (Isolated)
F = TO-202 (Non-islolated)
L = TO-220 (Isolated)
V = TO-251 (Non-islolated)
Gate Variations
3 = 3 mA (Q I, II, III, IV)
5 = 5 mA (Q I, II, III, IV)
6 = 5 mA (Q I, II, III)
6 = 10 mA (Q IV)
8 = 10 mA (Q I, II, III)
8 = 20 mA (Q IV)
Lead Form Dimensions
TO-202
TO-220
TO-92
X
Special Options
V = 4000 V Isolation
(TO-220 Package Only)
X8 = 0.8 A
N = 1 A
01 = 1 A
04 = 4 A
06 = 6 A
08 = 8 A
Q2004 L T 52
Device Type
Q =
Quadrac
Voltage Rating
20 = 200 V
40 = 400 V
60 = 600 V
Current Rating
04 = 4 A
06 = 6 A
08 = 8 A
10 = 10 A
15 = 15 A
Package Type
L = TO-220 (Isolated)
Gate Variation
T = Internal Diac Trigger
Lead Form Dimensions
TO-220
X
Special Options
V = 4000 V Isolation
(TO-220 Package Only)
H
Alternistor
Q20 04 F31
Device Type
Q = Triac or Alternistor
Voltage Rating
20 = 200 V
40 = 400 V
60 = 600 V
80 = 800 V
K0 = 1000 V
Current Rating
X8 = 0.8 A
01 = 1 A
04 = 4 A
06 = 6 A
08 = 8 A
10 = 10 A
12 = 12 A
15 = 15 A
25 = 25 A
30 = 30 A
35 = 35 A
40 = 40 A
Gate Variation
DH3 and VH3 = 10mA (Q I, II, III)
3 = 10 mA (Q I, II, III)
H3 = 20mA (Q I, II, III)
4 = 25 mA (Q I, II, III)
H4 = 35 mA (Q I, II, III) *
5 = 50 mA (Q I, II, III)
H5 = 50 mA (Q I, II, III) *
6 = 80 mA (Q I, II, III) *
7 = 100 mA (Q I, II, III) *
Lead Form Dimensions
TO-202
TO-220
TO-92
TO-218X
TO-218
X
Special Options
V = 4000 V Isolation
(TO-220 Package Only)
Package Type
D = TO-252 (Surface Mount)
E = TO-92 (Isolated)
F = TO-202 (Non-isolated)
J = TO-218X (Isolated)
K = TO-218 (Isolated)
L = TO-220 (Isolated)
N = TO-263 (Surface Mount)
P =
Fastpak
(Isolated)
R = TO-220 (Non-isolated)
V = TO-251 (Non-isolated)
W = TO-218X (Non-isolated)
* NOTE:
Alternistor device; no Quadrant IV operation
S20 06 FS2
21
Device Type
S = Sensitive SCR
Voltage Rating
20 = 200 V
40 = 400 V
60 = 600 V
Current Rating
X8 = 0.8 A
N = 1 A
06 = 6 A
08 = 8 A
10 = 10 A
Package Type
Blank = Compak (Surface Mount)
D = TO-252 (Surface Mount)
F = TO-202 (Non-islolated)
L = TO-220 (Isolated)
V = TO-251 (Non-islolated)
Gate Variations
S1 = 50 µA
S2 = 200 µA
S3 = 500 µA
Lead Form Dimensions
TO-202
TO-220
X
Special Options
V = 4000 V Isolated
(TO-220 Package Only)
EC 103 D175
Device Type
TCR = TO-92 (Isolated)
EC = TO-92 (Isolated)
T = TO-202 (Non-isolated)
2N = JEDEC (Isolated)
Voltage Rating for TCR
-4 = 200 V
-6 = 400 V
-8 = 600 V
Current Rating for TCR
22 = 1.5 A
Lead Form Dimensions
TO-92
TO-202
Current Rating for EC
103 = 0.8 A
Current Rating for T
106 = 4 A (I
GT
= 200 µA)
107 = 4 A (I
GT
= 500 µA)
Current Rating for 2N
5xxx = 0.8 A
Gate Current (for EC series only)
None = 200 µA
1 = 12 µA
2 = 50 µA
3 = 500 µA
Voltage Rating for EC and T
B = 200 V
D = 400 V
M = 600 V
Voltage Rating for 2N
5064 = 200 V
6565 = 400 V
©2002 Teccor Electronics P - 7 http://www.teccor.com
Thyristor Product Catalog +1 972-580-7777
Description of Part Numbers
SCR
Rectifier
Diac
Sidac
S20 08 F12
Device Type
S = Non-sensitive SCR
Voltage Rating
20 = 200 V
40 = 400 V
60 = 600 V
80 = 800 V
K0 = 1000 V
Current Rating
01 = 1 A
06 = 6 A
08 = 8 A
10 = 10 A
12 = 12 A
15 = 15 A
16 = 16 A
20 = 20 A
25 = 25 A
35 = 35 A
55 = 55 A
65 = 65 A
70 = 70 A
Package Type
D = TO
-
252 (Surface Mount)
E = TO
-
92 (Isolated)
F = TO-202 (Non-isolated)
J = TO-218X (Isolated)
K = TO-218 (Isolated)
L = TO-220 (Isolated)
M = TO-218 (Non-isolated)
N = TO-263 (Surface Mount)
R = TO-220 (Non-isolated)
V = TO
-
251 (Non-isolated)
W = TO-218X (Non-isolated)
Lead Form Dimensions
TO
-
202
TO
-
220
TO
-
92
TO
-
218X
TO
-
218
X
Special Options
V = 4000 V Isolation
(TO-220 Package Only)
D20 15 L55
Device Type
D = Rectifier
Voltage Rating
20 = 200 V
40 = 400 V
60 = 600 V
80 = 800 V
K0 = 1000 V
Current Rating
15 = 15 A
20 = 20 A
25 = 25 A
Package Type
L = TO-220 (Isolated)
Lead Form Dimensions
TO-220
V
Special Options
V = 4000 V Isolation
HT 32 91
Device Type
HT = Diac Trigger in DO-35
ST = Diac Trigger in DO-214
Lead Form Dimensions
DO-35
Voltage Rating
32 = 27 V to 37 V
35 = 30 V to 40 V
40 = 35 V to 45 V
32A / 5761 = 28 V to 36 V
32B / 5761A = 30 V to 34 V
34B = 32 V to 36 V
36A / 5762 = 32 V to 40 V
36B = 34 V to 38 V
K105 0E70
Device Type
K = Sidac
Voltage Rating
105 = 95 V to 113 V
110 = 104 V to 118 V
120 = 110 V to 125 V
130 = 120 V to 138 V
140 = 130 V to 146 V
150 = 140 V to 170 V
200 = 190 V to 215 V
220 = 205 V to 230 V
240 = 220 V to 250 V
250 = 240 V to 280 V
300 = 270 V to 330 V
Current Rating
0 = 1 A
Package Type
E = TO-92 (Isolated)
F = TO-202 (Non-islolated)
G = DO-15X (Isolated)
S = DO-214 (Surface Mount)
Lead Form Dimensions
TO-202
TO-92
http://www.teccor.com P - 8 ©2002 Teccor Electronics
+1 972-580-7777 Thyristor Product Catalog(972) 580-7777
Quality and Reliability
It is Teccor’s policy to ship quality products on time. We accom-
plish this through Total Quality Management based on the funda-
mentals of customer focus, continuous improvement, and people
involvement.
In support of this commitment, Teccor applies the following princi-
ples:
Employees shall be respected, involved, informed, and qualified
for their job with appropriate education, training, and experience.
Customer expectations shall be met or exceeded by consistently
shipping products that meet the agreed specifications, quality
levels, quantities, schedules, and test and reliability parameters.
Suppliers shall be selected by considering quality, service, deliv-
ery, and cost of ownership.
Design of products and processes will be driven by customer
needs, reliability, and manufacturability.
It is the responsibility of management to incorporate these
principles into policies and systems.
It is the responsibility of those in leadership roles to coach their
people and to reinforce these principles.
It is the responsibility of each individual employee to follow the
spirit of this statement to ensure that we meet the primary policy
— to ship quality products on time.
Quality Assurance
Incoming Material Quality
Teccor “Vendor Analysis” programs provide stringent require-
ments before components are delivered to Teccor. In addition,
purchased materials are tested rigidly at incoming inspection for
specification compliance prior to acceptance for use.
Process Controls
From silicon slice input through final testing, we use statistical
methods to control all critical processes. Process audits and lot
inspections are performed routinely at all stages of the manufac-
turing cycle.
Parametric Testing
All devices are 100% computer tested for specific electrical char-
acteristics at critical processing points.
Final Inspection
Each completed manufacturing lot is sampled and tested for
compliance with electrical and mechanical requirements.
Reliability Testing
Random samples are taken from various product families for
ongoing reliability testing.
Finished Goods Inspection
Product assurance inspection is performed immediately prior to
shipping.
Design Assurance
The design and production of Teccor devices is a demanding and
challenging task. Disciplined skills coupled with advanced com-
puter-aided design, production techniques, and test equipment
are essential elements in Teccor's ability to meet your demands
for the very highest levels of quality.
All products must first undergo rigid quality design reviews and
pass extensive environmental life testing. Teccor uses Statistical
Process Control (SPC) with associated control charts throughout
to monitor the manufacturing processes.
Only those products which pass tests designed to assure Tec-
cor's high quality and reliability standards, while economically
satisfying customer requirements, are approved for shipment. All
new products and materials must receive approval of QRA prior
to being released to production.
The combination of reliability testing, process controls, and lot
tracking assures the quality and reliability of Teccor's devices.
Since even the best control systems cannot overcome measure-
ment limitations, Teccor designs and manufactures its own com-
puterized test equipment.
Teccor's Reliability Engineering Group conducts ongoing product
reliability testing to further confirm the design and manufacturing
parameters.
©2002 Teccor Electronics P - 9 http://www.teccor.com
Thyristor Product Catalog +1 972-580-7777
Quality and Reliability
Reliability Stress Tests
The following table contains brief descriptions of the reliability tests commonly used in evaluating Teccor product reliability on a peri-
odic basis. These tests are applied across product lines depending on product availability and test equipment capacities. Other tests
may be performed when appropriate.
Flammability Test
For the UL 94V0 flammability test, all expoxies used in Teccor encapsulated devices are recognized by Underwriters Laboratories
Test Type Typical Conditions Test Description Standards
High Temperature
AC Blocking
TA = 100 °C to 150 °C, Bias @
100%
Rated VDRM, t = 24 hrs to 1000 hrs
Evaluation of the reliability of
product under bias conditions
and elevated temperature
MIL-STD-750, M-1040
High Temperature
Storage Life
TA = 150 °C, t = 250 to 1000 hrs Evaluation of the effects on
devices after long periods of
storage at high temperature
MIL-STD-750, M-1031
Temperature and Humidity
Bias Life
TA = 85 °C to 95 °C, rh = 85% to
95%
Bias @ 80% Rated VDRM
(320 VDC max)
t = 168 to 1008 hrs
Evaluation of the reliability of non-
hermetic packaged devices in
humid environments
EIA / JEDEC, JESD22-A101
Temperature Cycle
[Air to Air]
TA = -6C to 15C,
cycles = 10 to 500
Evaluation of the device’s ability
to withstand the exposure to
extreme temperatures and the
forces of TCE during transitions
between temperatures
MIL-STD-750, M-1051,
EIA / JEDEC, JESD22-A104
Thermal Shock
[Liquid to Liquid]
TA = 0 °C to 100 °C, ttxfr = 10 s,
cycled = 10 to 20
Evaluation of the device’s ability
to withstand the sudden changes
in temperature and exposure to
extreme temperatures
MIL-STD-750, M-1056
Autoclave TA = 121 °C, rh = 100%, P = 15 psig,
t = 24 hrs to 168 hrs
Accelerated environmental test to
evaluate the moisture resistance
of plastic packages
EIA / JEDEC, JESD22-A102
Resistance to
Solder Heat
TA = 260 °C, t = 10 s Evaluation of the device’s ability
to withstand the temperatures as
seen in wave soldering
operations
MIL-STD-750, M-2031
Solderability Steam aging = 1 hr to 8 hrs,
Tsolder = 245 °C, Flux = R
Evaluation of the solderability of
device terminals after an
extended period
MIL-STD-750, M-2026,
ANSI-J-STD-002
http://www.teccor.com P - 10 ©2002 Teccor Electronics
+1 972-580-7777 Thyristor Product Catalog(972) 580-7777
Standard Terms and Conditions
Supplier shall not be bound by any term proposed by Buyer in the
absence of written agreement to such term signed by an autho-
rized officer of Supplier.
(1) PRICE:
(A) Supplier reserves the right to change product prices at
any time but, whenever practicable, Supplier will give
Buyer at least thirty (30) days written notice before the
effective date of any price change. Unless Supplier has
specifically agreed in writing, signed by an authorized
officer of Supplier, that a quoted price shall not be sub-
ject to change for a certain time, all products shipped on
or after the effective date of a price change may be
billed at the new price level.
(B) Whenever Supplier agrees to a modification of Buyer's
order (which modification must be in writing and signed
by an authorized officer of Supplier), Supplier reserves
the right to alter its price, whether or not such price was
quoted as “firm.”
(C) Prices do not include federal, state or local taxes, now or
hereafter enacted, applicable to the goods sold. Taxes
will be added by Supplier to the sales prices whenever
Supplier has legal obligation to collect them and will be
paid by Buyer as invoiced unless Buyer provides Sup-
plier with a proper tax exemption certificate.
(2) PRODUCTION: Supplier may, at its sole discretion and at
any time, withdraw any catalog item from further production
without notice or liability to Buyer.
(3) INTEREST:
(A) All late payments shall bear interest thirty (30) days after
the due date stated on the invoice until paid at the lower
of one and one-half percent per month or the maximum
rate permitted by law. All interest becoming due shall, if
not paid when due, be added to principal and bear inter-
est from the due date. At Supplier's option, any payment
shall be applied first to interest and then to principal.
(B) It is the intention of the parties to comply with the laws of
the jurisdiction governing any agreement between the
parties relating to interest. If any construction of the
agreement between the parties indicates a different
right given to Supplier to demand or receive any sum
greater than that permissible by law as interest, such as
a mistake in calculation or wording, this paragraph shall
override. In any contingency which will cause the inter-
est paid or agreed to be paid to exceed the maximum
rate permitted by law, such excess will be applied to the
reduction of any principal amount due, or if there is no
principal amount due, shall be refunded.
(4) TITLE AND DELIVERY: Title to goods ordered by Buyer and
risk of loss or damage in transit or thereafter shall pass to
Buyer upon Supplier's delivery of the goods at Supplier's
plant or to a common carrier for shipment to Buyer.
(5) CONTINGENCIES: Supplier shall not be responsible for any
failure to perform due to causes reasonably beyond its con-
trol. These causes shall include, but not be restricted to, fire,
storm, flood, earthquake, explosion, accident, acts of public
enemy, war rebellion, insurrection, sabotage, epidemic,
quarantine restrictions, labor disputes, labor shortages, labor
slow downs and sit downs, transportation embargoes, failure
or delays in transportation, inability to secure raw materials
or machinery for the manufacture of its devices, acts of God,
acts of the Federal Government or any agency thereof, acts
of any state or local government or agency thereof, and judi-
cial action. Similar causes shall excuse Buyer for failure to
take goods ordered by Buyer, from the time Supplier
receives written notice from Buyer and for as long as the dis-
abling cause continues, other than for goods already in tran-
sit or specially fabricated and not readily saleable to other
buyers.
Supplier assumes no responsibility for any tools, dies, and
other equipment furnished Supplier by Buyer.
(6) LIMITED WARRANTY AND EXCLUSIVE REMEDY: Supplier
warrants all catalog products to be free from defects in mate-
rials and workmanship under normal and proper use and
application for a period of twelve (12) months from the date
code on the product in question (or if none, from the date of
delivery to Buyer.) With respect to products assembled, pre-
pared, or manufactured to Buyer's specifications, Supplier
warrants only that such products will meet Buyer's specifica-
tions upon delivery. As the party responsible for the specifi-
cations, Buyer shall be responsible for testing and inspecting
the products for adherence to specifications, and Supplier
shall have no liability in the absence of such testing and
inspection or if the product passes such testing or inspec-
tion. THE ABOVE WARRANTY IS THE ONLY WARRANTY
EXTENDED BY SUPPLIER, AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES AND CONDI-
TIONS, EXPRESSED OR IMPLIED (EXCEPT AS PRO-
VIDED HEREIN AS TO TITLE), ON ANY GOODS OR
SERVICES SOLD OR RENDERED BY SUPPLIER, INCLUD-
ING ANY IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY WILL NOT CREATE WARRANTY COVERAGE
FOR ANY ITEM INTO WHICH ANY PRODUCT SOLD BY
SUPPLIER MAY HAVE BEEN INCORPORATED OR
ADDED.
©2002 Teccor Electronics P - 11 http://www.teccor.com
Thyristor Product Catalog +1 972-580-7777
Standard Terms and Conditions
SUPPLIER'S ENTIRE LIABILITY AND BUYER'S EXCLU-
SIVE REMEDY UNDER THIS WARRANTY SHALL BE, AT
SUPPLIER'S OPTION, EITHER THE REPLACEMENT OF,
REPAIR OF, OR ISSUANCE OF CREDIT TO BUYER'S
ACCOUNT WITH SUPPLIER FOR ANY PRODUCTS
WHICH ARE PROPERLY RETURNED BY BUYER DURING
THE WARRANTY PERIOD. All returns must comply with the
following conditions:
(A) Supplier is to be promptly notified in writing upon discov-
ery of defects by Buyer.
(B) Buyer must obtain a Return Material Authorization
(RMA) number from the Supplier prior to returning prod-
uct.
(C) The defective product is returned to Supplier, transporta-
tion charges prepaid by Buyer.
(D) Supplier's examination of such product discloses, to its
satisfaction, that such defects have not been caused by
misuse, neglect, improper installation, repair, alteration,
or accident.
(E) The product is returned in the form it was delivered with
any necessary disassembly carried out by Buyer at
Buyer's expense.
IN NO EVENT SHALL SUPPLIER, OR ANYONE ELSE
ASSOCIATED IN THE CREATION OF ANY OF SUPPLIER'S
PRODUCTS OR SERVICES, BE LIABLE TO BUYER FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY
NATURE INCLUDING LOSS OF PROFITS, LOSS OF USE,
BUSINESS INTERUPTION, AND THE LIKE. BUYER
ACKNOWLEDGES THAT THE ABOVE WARRANTIES AND
LIMITATIONS THEREON ARE APPROPRIATE AND REA-
SONABLE IN EFFECTUATING SUPPLIER'S AND BUYER'S
MUTUAL INTENTION TO CONDUCT AN EFFICIENT
TRANSACTION AT PRICES MORE ADVANTAGEOUS TO
BUYER THAN WOULD BE AVAILABLE IN THE PRESENCE
OF OTHER WARRANTIES AND ASSURANCES.
(7) PATENTS: Buyer shall notify Supplier in writing of any claim
that any product or any part of use thereof furnished under
this agreement constitutes an infringement of any U.S.
patent, copyright, trade secret, or other proprietary rights of a
third party. Notice shall be given within a reasonable period
of time which should in most cases be within ten (10) days of
receipt by Buyer of any letter, summons, or complaint per-
taining to such a claim. At its option, Supplier may defend at
its expense any action brought against Buyer to the extent
that it is based on such a claim. Should Supplier choose to
defend any such claim, Supplier may fully participate in the
defense, settlement, or appeal of any action based on such
claim.
Should any product become, or in Supplier's opinion be likely
to become, the subject of an action based on any such claim,
Supplier may, at its option, as the Buyer's exclusive remedy,
either procure for the Buyer the right to continue using the
product, replace the product or modify the product to make it
noninfringing. IN NO EVENT SHALL SUPPLIER BE LIABLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
BASED ON ANY CLAIM OF INFRINGEMENT.
Supplier shall have no liability for any claim based on modifi-
cations of a product made by any person or entity other than
Supplier, or based on use of a product in conjunction with
any other item, unless expressly approved by Supplier. Sup-
plier does not warrant goods against claims of infringement
which are assembled, prepared, or manufactured to Buyer's
specifications.
(8) NON-WAIVER OF DEFAULT: Each shipment made under
any order shall be treated as a separate transaction, but in
the event of any default by Buyer, Supplier may decline to
make further shipments without in any way affecting its rights
under such order. If, despite any default by Buyer, Supplier
elects to continue to make shipments, its action shall not
constitute a waiver of that or any default by Buyer or in any
way affect Supplier's legal remedies for any such default. At
any time, Supplier's failure to exercise any right to remedy
available to it shall not constitute a waiver of that right or
remedy.
(9) TERMINATION: If the products to be furnished under this
order are to be used in the performance of a Government
contract or subcontract, and the Government terminates
such contract in whole or part, this order may be canceled to
the extent it was to be used in the canceled portion of said
Government contract and the liability of Buyer for termination
allowances shall be determined by the then applicable regu-
lations of the Government regarding termination of contracts.
Supplier may cancel any unfilled orders unless Buyer shall,
upon written notice, immediately pay for all goods delivered
or shall pay in advance for all goods ordered but not deliv-
ered, or both, at Supplier's option.
(10) LAW: The validity, performance and construction of these
terms and conditions and any sale made hereunder shall be
governed by the laws of the state of Texas.
(11) ASSIGNS: This agreement shall not be assignable by
either Supplier or Buyer. However, should either Supplier or
Buyer be sold or transferred in its entirety and as an ongoing
business, or should Supplier or Buyer sell or transfer in its
entirety and as an ongoing concern, any division, depart-
ment, or subsidiary responsible in whole or in part for the
performance of this Agreement, this Agreement shall be
binding upon and inure to the benefit of those successors
and assigns of Supplier, Buyer, or such division, department,
or subsidiary.
(12) MODIFICATION OF STANDARD TERMS AND CONDI-
TIONS: No attempted or suggested modification of or addi-
tion to any of the provisions upon the face or reverse of this
form, whether contained or arising in correspondence and/or
documents passing between Supplier and Buyer, in any
course of dealing between Supplier or Buyer, or in any cus-
tomary usage prevalent among businesses comparable to
those of Supplier and/or Buyer, shall be binding upon Sup-
plier unless made and agreed to in writing and signed by an
officer of Supplier.
(13) QUANTITIES: Any variation in quantities of electronic com-
ponents, or other goods shipped over or under the quantities
ordered (not to exceed 5%) shall constitute compliance with
Buyer's order and the unit price will continue to apply.
Notes
©2002 Teccor Electronics http://www.teccor.com
Thyristor Product Catalog +1 972-580-7777
Data Sheets
E0
V-I Characteristics of Thyristor Devices - - - - - - - - - - - - - - - - - - - - - E0-2
Electrical Parameter Terminology - - - - - - - - - - - - - - - - - - - - - - - - - E0-3
Sensitive Triacs- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E1
Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E2
QUADRACs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E3
Alternistor Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E4
Sensitive SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E5
SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E6
Rectifiers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E7
Diacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E8
SIDAC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E9
http://www.teccor.com E0 - 2 ©2002 Teccor Electronics
+1 972-580-7777 Thyristor Product Catalog
V-I Characteristics of Thyristor Devices
V-I Characteristics of Triac Device
V-I Characteristics of SCR Device
V-I Characteristics of Sidac Device with Negative Resistance
V-I Characteristics of Bilateral Trigger Diac
Breakover
Voltage
Specified Minimum
Off-state
Blocking
Voltage (V
DRM
)
+I
-I
+V
-V
Minimum Holding
Current (I
H
)
Voltage Drop (V
T
) at
Specified Current (i
T
)Latching Current (I
L
)
Off-state Leakage
Current – (I
DRM)
at
Specified V
DRM
Reverse
Breakdown
Voltage
Forward
Breakover
Voltage
Specified Minimum
Off - State
Blocking
Voltage (V
DRM
)
+I
-I
+V
-V
Minimum Holding
Current (I
H
)
Voltage Drop (V
T
) at
Specified Current (i
T
)
Latching Current (I
L
)
Off - State Leakage
Current - (I
DRM
) at
Specified V
DRM
Specified Minimum
Reverse Blocking
Voltage (V
RRM
)
Reverse Leakage
Current - (I
RRM
) at
Specified V
RRM
-V
+I
V
DRM
+V
V
S
I
S
I
H
R
S
I
DRM
I
BO
V
BO
V
T
I
T
(I
S
- I
BO
)
(V
BO
- V
S
)
R
S =
-I
+I
-I
10 mA
+V-V
Breakover
Current
IBO
Breakover
Voltage
VBO
V
©2002 Teccor Electronics E0 - 3 http://www.teccor.com
Thyristor Product Catalog +1 972-580-7777
Electrical Parameter Terminology
Thyristor
di/dt (Critical Rate-of-rise of On-state Current) – Maximum
value of the rate-of-rise of on-state current which a thyristor can
withstand without deleterious effect
dv/dt (Critical Rate-of-rise of Off-state Voltage or Static
dv/dt) – Minimum value of the rate-of-rise of principal voltage
which will cause switching from the off state to the on state
dv/dt(c) Critical Rate-of-rise of Commutation Voltage of a
Triac (Commutating dv/dt) – Minimum value of the rate-of-rise
of principal voltage which will cause switching from the off state
to the on state immediately following on-state current conduction
in the opposite quadrant
I2t (RMS Surge (Non-repetitive) On-state Fusing Current) –
Measure of let-through energy in terms of current and time for
fusing purposes
IBO (Breakover Current) Principal current at the breakover
point
IDRM (Repetitive Peak Off-state Current) – Maximum leakage
current that may occur under the conditions of VDRM
IGT (Gate Trigger Current) Minimum gate current required to
switch a thyristor from the off state to the on state
IH (Holding Current) Minimum principal current required to
maintain the thyristor in the on state
IPP (Peak Pulse Current) – Peak pulse current at a short time
duration and specified waveshape
IRRM (Repetitive Peak Reverse Current) – Maximum leakage
current that may occur under the conditions of VRRM
IS (Switching Current) – Current at VS when a sidac switches
from the clamping state to on state
IT(RMS) (On-state Current) – Anode cathode principal current
that may be allowed under stated conditions, usually the full-
cycle RMS current
ITSM (Surge (Non-repetitive) On-state Current) – Peak single
cycle AC current pulse allowed
PG(AV) (Average Gate Power Dissipation) – Value of gate
power which may be dissipated between the gate and main ter-
minal 1 (or cathode) average over a full cycle
PGM (Peak Gate Power Dissipation) – Maximum power which
may be dissipated between the gate and main terminal 1 (or
cathode) for a specified time duration
RθJA (Thermal Resistance, Junction-to-ambient) – Tempera-
ture difference between the thyristor junction and ambient divided
by the power dissipation causing the temperature difference
under conditions of thermal equilibrium
Note: Ambient is defined as the point where temperature does
not change as a result of the dissipation.
RθJC (Thermal Resistance, Junction-to-case) – Temperature
difference between the thyristor junction and the thyristor case
divided by the power dissipation causing the temperature differ-
ence under conditions of thermal equilibrium
tgt (Gate-controlled Turn-on Time) – Time interval between
the 10% rise of the gate pulse and the 90% rise of the principal
current pulse during switching of a thyristor from the off state to
the on state
tq (Circuit-commutated Turn-off Time) – Time interval
between the instant when the principal current has decreased to
zero after external switching of the principal voltage circuit and
the instant when the SCR is capable of supporting a specified
principal voltage without turning on
VBO (Breakover Voltage) – Principal voltage at the breakover
point
VDRM (Repetitive Peak Off-state Voltage) – Maximum allow-
able instantaneous value of repetitive off-state voltage that may
be applied across a bidirectional thyristor (forward or reverse
direction) or SCR (forward direction only)
VGT (Gate Trigger Voltage) – Minimum gate voltage required to
produce the gate trigger current
VRRM (Repetitive Peak Reverse Voltage) Maximum allow-
able instantaneous value of a repetitive reverse voltage that may
be applied across an SCR without causing reverse current ava-
lanche
VS (Switching Voltage) – Voltage point after VBO when a sidac
switches from a clamping state to on state
VT (On-state Voltage) – Principal voltage when the thyristor is in
the on state
Diode Rectifiers
IF(AV) (Average Forward Current) – Average forward conduc-
tion current
IFM (Maximum (Peak) Reverse Current) – Maximum reverse
leakage current that may occur at rated VRRM
IF(RMS) (RMS Forward Current) – RMS forward conduction cur-
rent
IFSM (Maximum (Peak) Forward (Non-repetitive) Surge
Current) – Maximum (peak) forward single cycle AC surge cur-
rent allowed for specified duration
VFM (Maximum (Peak) Forward Voltage Drop) Maximum
(peak) forward voltage drop from the anode to cathode at stated
conditions
VR (Reverse Blocking Voltage) – Maximum allowable DC
reverse blocking voltage that may be applied to the rectifier
VRRM (Maximum (Peak) Repetitive Reverse Voltage) Maxi-
mum peak allowable value of a repetitive reverse voltage that
may be applied to the rectifier
Notes
©2002 Teccor Electronics E1 - 1 http://www.teccor.com
Thyristor Product Catalog +1 972-580-7777
Selected Packages*
U.L. RECOGNIZED
File #E71639
MT2 MT1
G
Sensitive Triacs
(0.8 A to 8 A)
E1
General Description
Teccor's line of sensitive gate triacs includes devices with current
capabilities through 8 A. Voltage ranges are available from 200 V
to 600 V. This line features devices with guaranteed gate control
in Quadrants II and IV as well as control in the commonly used
Quadrants I and III. Four-quadrant control devices require
sensitive gate triacs. They can be controlled by digital circuitry
where positive-only or negative-only pulses must control AC
current in both directions through the device. Note that triacs with
low IGT values in Quadrants II and IV will have lower dv/dt
characteristics.
The sensitive gate triac is a bidirectional AC switch and is gate
controlled for either polarity of main terminal voltage. It is used
primarily for AC switching and phase control applications such as
motor speed controls, temperature modulation controls, and
lighting controls.
The epoxy TO-92 and TO-220 configurations feature Teccor's
electrically-isolated construction where the case or mounting tab
is internally isolated from the semiconductor chip and lead
attachments. Non-isolated epoxy TO-202 packages are available
as well as TO-251 and surface mount TO-252 (D-Pak). Tape-
and-reel capability and tube packing also are available. See
“Packing Options” section of this catalog.
All Teccor triacs have glass-passivated junctions. This glassing
process prevents migration of contaminants and ensures long-
term device reliability with parameter stability.
Variations of devices covered in this data sheet are available for
custom design applications. Consult factory for more information.
Features
Electrically-isolated packages
Glass-passivated junctions ensure long device
reliability and parameter stability
Voltage capability — up to 600 V
Surge capability — up to 80 A
Four-quadrant gating guaranteed
Compak Sensitive Gate Triac
Surface mount package — 0.8 A and 1 A series
New small profile three-leaded Compak package
Packaged in embossed carrier tape with 2,500
devices per reel
Can replace SOT-223
TO-202
TO-92
3-lead
Compak
*TO-220
Isolated
E1
TO-252
D-Pak
TO-251
V-Pak
Sensitive Triacs Data Sheets
http://www.teccor.com E1 - 2 ©2002 Teccor Electronics
+1 972-580-7777 Thyristor Product Catalog
See “General Notes” on page E1 - 4 and “Electrical Specification Notes” on page E1 - 5.
IT(RMS)
Part No.
VDRM IGT IDRM
Isolated Non-isolated
(11)
TO-92 Compak TO-220
TO-252
D-Pak TO-202
TO-251
V-Pak
(1)
Volts
(3) (6) (9)
mAmps
(1) (14)
mAmps
QI QII QIII QIV
TC =
25 °C
TC =
110 °C
MAX See “Package Dimensions” section for variations. (12) MIN MAX MAX
0.8 A
L2X8E3 L2X3 200 33330.01 0.1
L4X8E3 L4X3 400 33330.01 0.1
L6X8E3 L6X3 600 33330.01 0.1
L2X8E5 L2X5 200 55550.01 0.1
L4X8E5 L4X5 400 55550.01 0.1
L6X8E5 L6X5 600 55550.01 0.1
L2X8E6 200 55510 0.01 0.1
L4X8E6 400 55510 0.01 0.1
L6X8E6 600 55510 0.01 0.1
L2X8E8 200 10 10 10 20 0.01 0.1
L4X8E8 400 10 10 10 20 0.01 0.1
L6X8E8 600 10 10 10 20 0.01 0.1
1A
L201E3 L2N3 200 33330.010.1
L401E3 L4N3 400 33330.010.1
L601E3 L6N3 600 33330.010.1
L201E5 L2N5 200 55550.010.1
L401E5 L4N5 400 55550.010.1
L601E5 L6N5 600 55550.010.1
L201E6 200 5 5 5 10 0.01 0.1
L401E6 400 5 5 5 10 0.01 0.1
L601E6 600 5 5 5 10 0.01 0.1
L201E8 200 10101020 0.01 0.1
L401E8 400 10101020 0.01 0.1
L601E8 600 10101020 0.01 0.1
4A
L2004L3 L2004D3 L2004F31 L2004V3 200 33330.01 0.2
L4004L3 L4004D3 L4004F31 L4004V3 400 33330.01 0.2
L6004L3 L6004D3 L6004F31 L6004V3 600 33330.01 0.2
L2004L5 L2004D5 L2004F51 L2004V5 200 55550.01 0.2
L4004L5 L4004D5 L4004F51 L4004V5 400 55550.01 0.2
L6004L5 L6004D5 L6004F51 L6004V5 600 55550.01 0.2
L2004L6 L2004D6 L2004F61 L2004V6 200 55510 0.01 0.2
L4004L6 L4004D6 L4004F61 L4004V6 400 55510 0.01 0.2
L6004L6 L6004D6 L6004F61 L6004V6 600 55510 0.01 0.2
L2004L8 L2004D8 L2004F81 L2004V8 200 10 10 10 20 0.01 0.2
L4004L8 L4004D8 L4004F81 L4004V8 400 10 10 10 20 0.01 0.2
L6004L8 L6004D8 L6004F81 L6004V8 600 10 10 10 20 0.01 0.2
MT1
G
MT2
MT2
MT1
G
MT1 MT2
G
MT2
MT2
MT1
G
MT1 G
MT2
MT2
MT2
MT2
G
MT1