Specifications subject to change without notice.
Please check our website for latest information.
Chip Inductors
1008CT Series (2520)
Document 102-1
Document 102-1 Revised 12/09/03
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer with Coilcraft-provided correlation
pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at using an Agilent/HP 4291A with an Agilent/
HP 16193 test fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF840 test fixture.
7. Average current for a 15°C rise above 25°C ambient.
8. Operating temperature range 40°C to +125°C.
9. Electrical specifications at 25°C.
See Qualification Standards section for environmental and test data.
For part marking data see Color Coding section.
1. When ordering, please specify tolerance and packaging codes:
1008CT-101XJBC
Tolerance: F =1% G = 2% J = 5%
(Table shows stock tolerances in bold.)
Packaging: C =7 machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B= Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D=13 machine-ready reel. EIA-481 embossed plastic
tape (7500 parts per full reel).
The 0.055 profile makes these parts ideal for low
clearance applications. Their simple construction en-
sures high reliability and stability, and they feature much
higher SRF values than ferrite alternatives. For free
evaluation samples, visit www.coilcraft.com or contact
Coilcraft.
Inductance2Percent3SRF min5DCR max6Irms7
Part number1(nH) tolerance Q min4(MHz) (Ohms) (mA)
1008CT-040X_B_ 4.7 @ 50 MHz 528 @ 500 MHz 7500 0.15 600
1008CT-080X_B_ 8.2 @ 50 MHz 5,240 @ 500 MHz 5000 0.22 600
1008CT-100X_B_ 10 @ 50 MHz 540 @ 500 MHz 2700 0.25 600
1008CT-150X_B_ 15 @ 50 MHz 5,240 @ 500 MHz 3000 0.22 600
1008CT-200X_B_ 20 @ 50 MHz 5,250 @ 500 MHz 2400 0.33 600
1008CT-300X_B_ 30 @ 50 MHz 5,250 @ 500 MHz 2400 0.38 600
1008CT-400X_B_ 40 @ 50 MHz 5,260 @ 500 MHz 2000 0.43 600
1008CT-500X_B_ 50 @ 50 MHz 5,260 @ 500 MHz 1900 0.48 600
1008CT-600X_B_ 60 @ 50 MHz 5,2,1 60 @ 500 MHz 1800 0.52 600
1008CT-700X_B_ 70 @ 50 MHz 5,2,1 60 @ 500 MHz 1700 0.55 510
1008CT-800X_B_ 80 @ 50 MHz 5,2,1 60 @ 500 MHz 1400 0.56 510
1008CT-900X_B_ 90 @ 50 MHz 5,265 @ 500 MHz 1400 0.61 500
1008CT-101X_B_ 100 @ 50 MHz 5,260 @ 500 MHz 1000 0.63 480
1008CT Series (2520)
Specifications subject to change without notice.
Please check our website for latest information.
Document 102-2
Document 102-2 Revised 12/15/04
0
20
40
60
80
100
110 100 1000 10000
Frequency (MHz)
Q Factor
80 nH
60 nH
4.7 nH
30 nH
0
20
40
60
80
100
110 100 1000 10000
Frequency (MHz)
Inductance (nH)
4.7 nH
30 nH
60 nH
80 nH
Typical Q vs Frequency Typical L vs Frequency
I
I
J
H
Land
Pattern
A
B
overall
F
G
E
terminal
F
C
D
Terminal wraparound:
approx 0.015/0,38 both ends
A max B max C max D ref E F G H I J
0.115 0.110 0.050 0.020 0.080 0.020 0.060 0.100 0.040 0.050
2,92 2,79 1,27 0,51 2,03 0,51 1,52 2,54 1,02 1,27
Weight: 17.1 – 17.8 mg
Terminations: Platinum/palladium/silver
Tape and reel: 2000/7 reel; 7500/13 reel 8 mm tape width
For packaging data see Tape and Reel Specifications section.