Shenzhen Orient Technology Co ., Ltd ORPC-6N137 ORIENT Photocoupler Product Data Sheet Name: ORPC-6N135/ ORPC-6N136 Customer:_________________ Date: _________________ SHENZHEN ORIENT TECHNOLOGY CO.,LTD. Block A 3rd Floor No.4 Building,Tian'an Cyber Park,Huangge Rd,LongGang Dist,Shenzhen,GD TEL0755-29681816 FAX0755-29681200 www.orient-opto.com Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 1 A0 Shenzhen Orient Technology Co ., Ltd ORPC-6N135 1Features (1). High speed - 1MBd model (2). Adapted to the dual-in-line, lead spacing width, surface installation. (3). Store output. (4). UL, VDE approval. 2Instructions 6N135/6N136 consists of highly efficient AlGaAs light-emitting diodes and high-speed optical detectors. The design provides good ac and dc isolation at the input and output ends of the photoelectric coupler. Connections related to photodiode biasing can improve the speed of conventional phototransistor couplers by reducing the capacitance of the matrix collector. Internal shielding ensures high transient immunity in general mode. Ensure the common-mode transient immunity to 1 kv/sec. 3 Application Range * line receiver isolation *A/ D, D/A converted digital signal isolation * eliminate noise from the ground loop * switching power supply * alternative pulse transformers * motor control system * interface of microprocessor system, computer and peripheral equipment 4Functional Diagram Truth table InputLEDOutput ON L OFF H 0.1 capacitor F bypass capacitance needs to be connected between A Pin8 and Pin5 Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 2 A0 Shenzhen Orient Technology Co ., Ltd ORPC-6N135 5Absolute Maximum Ratings (Ta=25) *1 Parameter Symbol Rated Value Unit Average Forward Input Current IF 25 mA Reverse Input Voltage VR 5 V Power Dissipation PI 45 mV Output Collector Current IO 8 mA Output Collector Voltage VO 20 V PO 100 mW Supply Voltage VCC 15 V Insulation Voltage Viso 5000 Vrms Working Temperature Topr -40 + 85 Storage Temperature Tstg -55 + 125 *2 Soldering Temperature Tsol 260 Input Output Output Collector Power Dissipation *1. Room temperature = 25 . Exceeding the maximum absolute rating can permanently damage the device. Working long hours at the maximum absolute rating can affect reliability. *2. soldering time is 10 seconds Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 3 A0 Shenzhen Orient Technology Co ., Ltd ORPC-6N135 6Electrical optical characteristics at TA=25 Parameter Symbol Condition Device Min Typ Max Unit -- 1.4 1.7 V 5 -- -- V Input Forward voltage VF IF= 16mA Reverse voltage BVR IR = 10A 6N135 6N136 Detector Current transfer ratio CTR IF= 16mA, Vo=0.4V, 6N135 7 18 50 Vcc=4.5V 6N136 19 24 50 6N135 -- 0.18 0.4 VCC=4.5V IF=16mA, Low Level Output Voltage VOL Io=1.1mA Vcc=4.5V IF=16mA, Io=1.1mA VCC=5.5V VO=5.5V, High Level Output Current IOH IF=0mA VCC=15V VO=15V, Current Low Level Supply Current ICCL ICCH V 6N136 -- 0.25 0.4 6N135 -- -- 0.5 V IF=0mA High Level Supply 6N136 IF=16mA,Vo=open,(VCC=15 6N135 6N136 V) IF=0mA,Vo=open,(VCC=15V 6N135 Copyright(c) 2018 Orient Tech Corporation.All rights Reserved % ) 6N136 4 -- -- 1 -- 400 -- uA -- -- 1 uA A0 Shenzhen Orient Technology Co ., Ltd ORPC-6N135 7Switching Characteristics at TA=25 Parameter Symbol Condition RL=4.1k Propagation delay time to output Low level tPHL IF=16mA RL=1.9k IF=16mA RL=4.1k Propagation delay time to output High level tPLH IF=16mA RL=1.9k IF=16mA Device Min Typ Max Unit 6N135 -- 0.09 1.5 us 6N136 -- 0.1 0.8 us 6N135 -- 0.8 1.5 us 6N136 -- 0.4 0.8 us 1 10 -- kV/s 1 10 -- kV/s VCM=10Vp-p,RL =4.1k, Logic High Common Mode Transient Immunity |CMH| 6N135 IF=0mA VCM=10Vp-p,RL =1.9k, 6N136 IF=0mA VCM=10Vp-p,RL =4.1k, Logic Low Common Mode Transient Immunity |CML| 6N135 IF=0mA VCM=10Vp-p,RL =1.9k, 6N136 IF=0mA Recommended temperature range (TA = 0 -- 70 ), unless otherwise specified power supply for 5 v. Typical values of TA = 25 . Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 5 A0 Shenzhen Orient Technology Co ., Ltd ORPC-6N135 8Isolation characteristics at TA=25 Parameter Input-Output Insulation Leakage Current Withstand Insulation Test Voltage Input-Output Resistance Symbol Condition 45% RH,t=5s, II-O VISO VI-O = 3kV DC,TA =25 C Min Typ Max Unit -- -- 1 A -- -- VRMS 1012 -- RH 50%, t =1min,TA=25 5000 RI-O VI-O=5000V DC -- Typical values of TA = 25 Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 6 A0 Shenzhen Orient Technology Co ., Ltd ORPC-6N135 9Naming Rule NOTE 1year Code 2Week Code '08' means' 2008 ', '09' means' 2009 'and so on. 01 represents the first week, 02 represents the second week, and so on. 3ORManufacturer name, representing manufacturer Shenzhen Orient Components Co., Ltd. 4Type code: representing Type 6N135. 5Anode Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 7 A0 Shenzhen Orient Technology Co ., Ltd ORPC-6N135 10 Outer Dimension 1OR-6N135 2OR-6N135M 3OR-6N135S Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 8 A0 Shenzhen Orient Technology (1)OR-6N136 Co ., Ltd ORPC-6N135 (2)OR-6N136M (3)OR-6N136S Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 9 A0 Shenzhen Orient Technology Co ., Ltd ORPC-6N135 11Recommended Foot Print Patterns (Mount Pad)) (unitmm) 12Taping Dimensions 1)OR-6N135-TA/OR-6N136-TA Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 10 A0 Shenzhen Orient Technology Co ., Ltd ORPC-6N135 (2)OR-6N135-TA1/OR-6N136-TA1 type symbol Dimensions: mm ( inches) bandwidth W 160.30.63 pitch P0 40.10.15 F 7.50.10.295 P2 20.10.079 P1 120.10.472 pitch interval Encapsulation TA/TA1 type amountpcs Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 1000 11 A0 Shenzhen Orient Technology Co ., Ltd ORPC-6N135 13 Temperature Profile Of Soldering 1IR Reflow soldering (JEDEC-STD-020C compliant) Note: one solder backflow is recommended under the conditions described below in the temperature and time profile. Do not weld more than three times. Configuration items conditions Preheat - The lowest temperature TSmin ) 150C 200C - The highest temperature TSmax ) 9030 sec - Time (min to Max TS) Soldering zone - Temperature TL 217C - TimetL 60100 sec 260C Peak Temperature 3C / sec max. Ramp-up rate Drop rate 3C / sec max. Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 36C / sec 12 A0 Shenzhen Orient Technology Co ., Ltd ORPC-6N135 2Wave soldering (JEDEC22A111 compliant) One-time welding is recommended under the temperature condition. Temperature 260+0/-5C Time 10 sec Preheat temperature 5 to 140C 30 to 80 sec Preheat time 3Hand soldering by soldering iron Single lead welding is allowed in each process and one-time welding is recommended. Temperature 380+0/-5C Time 3 sec max Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 13 A0 Shenzhen Orient Technology Co ., Ltd ORPC-6N135 14 Switching time test circuit Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 14 A0 Shenzhen Orient Technology Co ., Ltd ORPC-6N135 15Characteristics Curve Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 15 A0 Shenzhen Orient Technology Copyright(c) 2018 Orient Tech Corporation.All rights Reserved 16 Co ., Ltd ORPC-6N135 A0