SIL05E Series 3.0-5.5Vin single output DC/DC CONVERTERS E Class Non-isolated 1 NEW Product * * * * * * * 5A Current rating Input voltage range: 3.0V - 5.5V Output voltage range: 0.75V - 3.63V Ultra high efficiency: 94% @ 5Vin and 3.3Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >9 million hours per Telcordia SR-332 * Ideal solution where board space is at a premium or tighter card pitch is required * Industry standard footprint The SIL05E series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from a 3.3V to 5V source. The SIL05E has a wide input range (3.0V to 5.5V) and offers a wide 0.75V to 3.63V output voltage range with a 5A load, which allows for maximum design flexibility and a pathway for future upgrades. The SIL05E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface-mount technology and automated manufacturing techniques, the SIL05E offers compact size and efficiencies of up to 94%. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability EMC CHARACTERISTICS 0.75V to 3.63V Setpoint accuracy 0.4% Line regulation 1.0% Load regulation 1.0% Minimum load 0A Overshoot/undershoot None Ripple and noise 5Hz to 20MHz 75mV pk-pk 25mV rms Temperature co-efficient 0.01%/C Transient response 60mV max. deviation 50s recovery to within 1% INPUT SPECIFICATIONS EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 GENERAL SPECIFICATIONS Efficiency 94% typ. Insulation voltage Switching frequency Non-isolated Fixed 300kHz typ. Approvals and standards EN60950 UL/cUL60950 Material flammability Dimensions UL94V-0 (LxWxH) 0.902 x 0.279 x 0.402 inches 22.90 x 7.09 x 10.21 mm Weight Input voltage range Input current Electrostatic discharge Conducted immunity Radiated immunity 3.0 to 5.5VDC No load (max.) Input current (max.) Input reflected ripple Remote ON/OFF Start-up time 150mA 3.9A max. @ Io max. and Vout = 3.3V MTBF 20ms Telcordia SR-332 9,009,00 ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 2) 40mA rms (See Note 1) 2.5g (0.09oz) Operating ambient, temperature Non-operating -40C to +85C -40C to +125C PROTECTION Short-circuit protection Thermal protection Continuous Automatic recovery International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. E174104 UL 60950 file No. E174104 TUV Product Service (EN60950) Certificate No. B 03 10 38572 037 CB report and certificate to DE3-51686M1 File Name: sil05e_05.pdf Rev (02): 21 Jul 2004 SIL05E Series 3.0-5.5Vin single output DC/DC CONVERTERS E Class Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) INPUT VOLTAGE OUTPUT VOLTAGE 18.15W 3.0V - 5.5V 0.75V - 3.63V Part Number System with Options NEW Product OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (3) 0A 5A 94% 1.0% 1.0% SIL05E-05W3V3-V REGULATION SIL05E-05W3V3-V Product Family SIL = Single In Line Rated Output Current 05 = 5Amps Performance E = Enhanced Performance Mounting Option V = Vertical H = Horizontal Output Voltage 0.75V - 3.63V Type of Output W = Wide Input Voltage 05 = 3.0V - 5.5V Output Voltage Adjustment of the SIL05E-05W3V3 Series The ultra-wide output voltage trim range offers major advantages to users who select the SIL05E-05W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.75V to 3.63V. When the SIL05E-05W3V3 converter leaves the factory the output has been adjusted to the default voltage of 0.75V * When Vin 4.5V, then Vout can be adjusted from 0.75V to 3.63V * When Vin < 4.5V, then Vout can be adjusted from 0.75V to 2.75V Notes 1 The SIL05E features a `Negative Logic' Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground The following conditions apply for the SIL05E: Configuration Remote pin open circuit Remote pin pulled low Remote pin pulled high [Von/off >2.5V] 2 3 Converter Operation Unit is ON Unit is ON Unit is OFF An `Positive Logic' Remote ON/OFF version is also possible with this converter. To order please place the suffix `-R' at the end of the model number e.g. SIL05E-05W3V3-VR. Full de-rating curves available in both the Long Form Data Sheet and Application Note. For horizontal mounting option please consult factory for details. File Name: sil05e_05.pdf Rev (02): 21 Jul 2004 SIL05E Series 3.0-5.5Vin single output DC/DC CONVERTERS E Class Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product 0.279 [7.09] 0.902 [22.90] 0.402 [10.21] 5 4 3 2 1 0.150 [3.81] 0.050 [1.27] 0.025[0.64] x 0.025[0.64] Connector 5 places 0.100 [2.54] 0.600 [15.24] 0.700 [17.78] 0.800 [20.32] All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated PIN CONNECTIONS PIN NUMBER FUNCTION 1 Vout 2 Trim 3 GND 4 Vin 5 Remote ON/OFF Data Sheet (c) Artesyn Technologies(R) 2004 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com File Name: sil05e_05.pdf Rev (02): 21 Jul 2004