THIS PAGE INTENTIONALLY LEFT BLANK
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 1
HMC807LP6CE
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
v03.0411
Functional Diagram
Features
• RF Bandwidth: 12.4 GHz to 13.4 GHz
• Fractional or Integer Modes
• Ultra Low Phase Noise
12.9 GHz; 50 MHz Ref.
-95 / -98 dBc/Hz @ 10 kHz (Frac / Int)
-132 dBc/Hz @ 1 MHz (Open Loop)
• Figure of Merit (FOM)
-221 / -226 dBc/Hz (Frac / Int)
• 24-bit Step Size, Resolution 3 Hz typ
• 225 MHz, 14-bit reference path input
• Direct FSK Modulation Mode
• Cycle Slip Prevention
• Read / Write Serial Port, Chip ID
• 40 Lead 6 x 6 mm SMT Package: 36 mm
Typical Applications
• VSAT Radio
• Point-to-Point / Multi-Point Radio
• Test Equipment & Industrial Control
• Military End-Use
• Phased Array Applications
[1] Please refer to the pin description table for details
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 2
General Description
The HMC807LP6CE is a fully functioned Fractional-N Phase-Locked-Loop (PLL) with an Integrated Voltage
Controlled Oscillator (VCO). The input reference frequency range is 100 kHz to 220 MHz while the advanced delta-
sigma modulator design in the fractional PLL allows both ultra-ne step sizes and very low spurious products. The
highly integrated structure provides excellent phase noise performance over temperature, shock and process. The
HMC807LP6CE is packaged in a leadless QFN 6 x 6 mm surface mount package. The output power is 8 dBm typical,
making the HMC807LP6CE ideal for driving the LO port of many of Hittite’s Hi Linearity and I/Q mixer products.
For theory of operation and register map refer to the “PLLs w/ Integrated VCO - Microwave VCOs” Operating Guide.
To view the Operating Guide, please visit www.hittite.com and choose HMC807LP6CE from the “Search by Part
Number” pull down menu.
HMC807LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
Parameter Condition Min. Typ. Max. Units
RF Output Characteristics
VCO Output Frequency Range 12.4 12.9 13.4 GHz
VCO Output Power 4 8 10 dBm
VCO Tuning Voltage 2 13 V
VCO Tuning Sensitivity VTUNE = +5V 190 MHz/V
Frequency Pulling (into a 2:1 VSWR) 5 MHz pp
Frequency Pushing VTUNE = +5V 6 MHz/V
Frequency Drift Rate 1.2 MHz/
°C
Sub Harmonic (1/2) 25 dBc
Harmonic (2nd) 18 dBc
Harmonic (3rd) 35 dBc
VCO SSB Phase Noise @ 100 kHz Offset (Open Loop) VTUNE = +5V
Fvco = 12.9 GHz -110 dBc/Hz
Synthesizer In-Band
SSB Phase Noise @ 10 kHz Offset (Frac/Int)
Fref = 50 MHz Fvco = 12.9 GHz
Loop BW = 100 kHz -95 / -98 dBc/Hz
Synthesizer Normalized In-Band
SSB Phase Noise Floor (Frac/Int) -221 / -226 dBc/Hz
Synthesizer Fractional Spurs [1] -65 dBc
Synthesizer Frequency Settling Time (100 MHz Step) From 13 GHz to 12.9 GHz
Loop BW = 100 kHz 104 s
16-Bit Divider Range (Int) N Divider Ratio 216+31 32 65567
16-Bit Divider Range (Frac) N Divider Ratio 216-1 36 65535
REF Input Characteristics
Max Ref Input Frequency (3.3V) 200 225 MHz
Min Ref Input Frequency 100 200 kHz
Ref Input Sensitivity AC Coupled 500 700 mVpp
Max Ref Input DC Coupled 0 VDDIO V
Ref Input Capacitance 5 pF
14-Bit Ref Divider Range 16383 1
Electrical Specications, TA = +25° C; VCCVCO, VDDCP, VCCCP = +5V; AVCC, VCCPS
VDDPFD, AVDD, RVDD, DVDD, DVDDM, DVDDQ, VDDIO = +3.3V; AGND = DGND = 0V
[1] Actual spur level is dependent on loop parameters and will increase at division ratios closest to integer boundaries. Number listed is average
value.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 3
Parameter Condition Min. Typ. Max. Units
Phase Detector
Max Phase Detector Frequency (Frac) 70 105 MHz
Max Phase Detector Frequency (Int) 140 160 MHz
Min Phase Detector Frequency 100 kHz
Charge Pump
Max Output Current 2 mA
Min Output Current 500 µA
Charge Pump Noise Input referred 50 MHz Ref. -145 dBc/Hz
Logic Inputs
VIH Input High Voltage VDDIO-0.4 VDDIO V
VIL Input Low Voltage 0 0.4 V
Logic Outputs
VOH Output High Voltage VDDIO-0.4 VDDIO V
VOL Output Low Voltage 0 0.4 V
Serial Port Max Clock 50 MHz
Power Supply Voltages
Analog 3.3V Supplies: AVCC, VDDPFD, AVDD, RVDD,
VCCPS AVDD must equal DVDD 3 3.3 3.45 V
Digital Internal Supplies: DVDD, DVDDQ, DVDDM 3 3.3 3.45 V
Digital I/O Supplies: VDDIO Logic I/O 1.8 3.3 5.5 V
Analog 5V Supplies: VCCVCO, VDDCP, VCCCP VCCCP must equal VDDCP 4.75 5 5.25 V
Power Supply Currents
Total Current Consumption (5V) 205 250 mA
Total Current Consumption (3.3V) 90 110 mA
Power Down Current [1] CSP Disabled 1 10 µA
CSP Enabled 450 µA
Bias Reference Voltage Measured with 10 G meter 1.880 1.920 1.960 V
[1] Refers only to the Synthesizer portion of the HMC807LP6CE
HMC807LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
Electrical Specications (Continued)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 4
HMC807LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
SSB Phase Noise vs. Frequency,
Integer Mode
SSB Phase Noise vs. Temperature
@ 12.9 GHz, Integer Mode
SSB Phase Noise vs. Reference Freq. &
Loop BW @ 12.9 GHz, Integer Mode
SSB Phase Noise Fractional
Spurs @ 12.902 GHz
Example of Cycle Slip Prevention Hop
from 13.2 to 12.7 GHz
-150
-140
-130
-120
-110
-100
-90
-80
-70
-60
102103104105106107
12.4 GHz
12.9 GHz
13.4 GHz
OFFSET FREQUENCY (Hz)
PHASE NOISE (dBc/Hz)
Temp = 25C
Fref = 50MHz
Loop BW = 100kHz
-150
-140
-130
-120
-110
-100
-90
-80
-70
-60
102103104105106107
Fref = 10MHz
Loop BW= 10kHz
Fref = 50MHz
Loop BW=100kHz
OFFSET FREQUENCY (Hz)
PHASE NOISE (dBc/Hz)
102103104105106107
-150
-140
-130
-120
-110
-100
-90
-80
-70
-60
OFFSET FREQUENCY (Hz)
PHASE NOISE (dBc/Hz)
Temp = 25C
Fref = 50MHz
Loop BW = 100kHz
-10 0 10 20 30 40 50
12.6
12.7
12.8
12.9
13
13.1
13.2
13.3
FREQUENCY (GHz)
TIME (μSEC)
CSP ON
CSP OFF
-150
-140
-130
-120
-110
-100
-90
-80
-70
-60
102103104105106107
+25 C
+85 C
-40 C
OFFSET FREQUENCY (Hz)
PHASE NOISE (dBc/Hz)
Fref = 50MHz
Loop BW = 100kHz
Typical Reference Sensitivity
vs. Frequency, 3.3V [1]
-50
-40
-30
-20
-10
0
10
20
0 50 100 150 200 250 300
FREQUENCY (MHz)
R = Max, +25C
R = 3, +85C
R = Max, +85C
R = 3, +25C
SENSITIVITY (dBm)
[1] R refers to the reference path division ratio
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 5
HMC807LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
Open Loop VCO SSB Phase Noise @
Vtune = +5V
Open Loop VCO SSB Phase Noise vs.
Tuning Voltage
-120
-100
-80
-60
-40
-20
0
1 2 3 4 5 6 7 8 9 10 11 12 13
10 kHz Offset
100 kHz Offset
SSB PHASE NOISE (dBC/Hz)
TUNING VOLTAGE (V)
-160
-140
-120
-100
-80
-60
-40
-20
0
103104105106107
+25C
+85C
-40C
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
Frequency vs. Tuning Voltage, T = 25°C
Sensitivity vs. Tuning Voltage, Vcc = +5V
Frequency vs. Tuning Voltage, Vcc = +5V
Output Power
vs. Tuning Voltage, Vcc = +5V
10.8
11.2
11.6
12
12.4
12.8
13.2
13.6
14
0 1 2 3 4 5 6 7 8 9 10 11 12 13
Vcc=4.75V
Vcc=5.0V
Vcc=5.25V
OUTPUT FREQUENCY (GHz)
TUNING VOLTAGE (V)
0
2
4
6
8
10
12
0 1 2 3 4 5 6 7 8 9 10 11 12 13
+25C
+85C
-40C
OUTPUT POWER (dBm)
TUNING VOLTAGE (V)
0
100
200
300
400
500
600
700
800
0 1 2 3 4 5 6 7 8 9 10 11 12 13
+25C
+85C
-40C
SENSITIVITY (MHz/V)
TUNING VOLTAGE (V)
10.8
11.2
11.6
12
12.4
12.8
13.2
13.6
14
0 1 2 3 4 5 6 7 8 9 10 11 12 13
+25C
+85C
-40C
OUTPUT FREQUENCY (GHz)
TUNING VOLTAGE (V)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 6
HMC807LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
Pin Descriptions
Pin Number Function Description
1, 9 - 13, 22, 36 N/C No Connection. These pins may be connected to RF/DC ground.
Performance will not be affected.
2 - 4, 7, 37, 39 GND [1] These pins must be connected to RF/DC Ground
5 GND These pins and package bottom
must be connected to RF/DC Ground
8 VCCVCO2 [2]
+5V Power Supply for VCO
40 VCCVCO1
6 VTUNE Control Voltage Input. Modulation port bandwidth
dependent on drive source impedance.
14 ACG AC Ground. This pin must be connected to
an external capacitor to ground.
15 AVCC
Analog Power supply pin for the RF Section.
A decoupling capacitor to the ground plane should
be placed as close as possible to this pin. Nominally 3.3V
16 VDDCP +5V Power Supply for charge pump digital section
17 VCCCP +5V Power Supply for the charge pump analog section
18 CP Charge pump output
19 VDDPFD Analog Power supply for the phase frequency detector, Nominally 3.3V
20 BIAS [3] External bypass decoupling for precision bias circuits,
1.920V ±20 mV is generated internally
21 AVDD Analog Power supply for analog ref paths, Nominally 3.3V
23 REFN Reference input (Negative or AC coupled to GND)
24 REFP Reference input (Positive)
25 RVDD Ref path supply
26 DVDDQ Digital supply for Substrate, Nominally 3.3V
27 CE Chip Enable
28 SEN Serial port latch enable input
29 SCK Serial port clock input
30 SDI Serial port data input
31 DVDD Power supply pin for internal digital circuitry. Nominally 3.3V
32 VDDIO Power Supply for digital I/O driver
33 LD_SDO Lock Detect, Main Serial Data Output
or VCO Serial Port Data Out
34 VCCPS Analog Power Supply for Prescaler, Nominally 3.3V
35 DVDDM Digital Power Supply for M-Counter, Nominally 3.3V
38 RFOUT RF output (AC coupled).
[1] This pin is not connected internally, however, this pin must be connected to GND to maintain product family pin for pin compatibility.
[2] This pin is not connected internally, however, this pin must be connected to Vcc to maintain product family pin for pin compatibility.
[3] BIAS ref voltage (pin 20) cannot drive an external load, and must be measured with a 10 GOhm meter such as Agilent 34410A; a typical
10 Mohm DVM will read erroneously.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 7
HMC807LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
Pins Equivalent Schematic
RFOUT
VCCVCO1
VTUNE
GND
SEN, CE, SCK, SDI
LD_SDO
CP
Pin Schematic Equivalents
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 8
HMC807LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
Pin Schematic Equivalents (Continued)
Pins Equivalent Schematic
Bias
REFN, REFP
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 9
HMC807LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
Evaluation Circuit
A
E
B
F
C
G
D
H
I
J
K
L
M
DEPOP
DEPOP
ADJ
BPASS
GND
VOUT
VIN
SD
GND
3FOUT
VC
VDD
DEPOP
DEPOP
DEPOP
DEPOP
DEPOP
DEPOP
EN
GND
VOUT VIN
ADJ
BPASS
GND
VOUT
VIN
SD
EN
GND
VOUT VIN
EN
GND
VOUT VIN
DEPOP
ACG
AVCC
AVDD
BIAS
CE
CP
DVDD
DVDDM
DVDDQ
GND
LD_SDO
NC
REFN
REFP
RFOUT
RVDD
SCK
SDI
SEN
VCCCP VCCPS
VCCVCO2
VDDCP
VDDIOVDDPFD
VTUNE
NC
NC
GND
GND
GND
NC
NC
VCCVCO1
NCNC
NC
GND
GND
GND
50 Ohm Trace
LD
+15V
5.5V
GND
RFout 50 Ohm Co-Planar Trace
TCXO
SYNTH
GND
Header to USB Board
GND
REFin
1
10
12
13
22
3
36
37
39
4
40
5
7
9
14
15
21
20
27
18
31
35
26
2
33
11
23
24
38
25
29
30
28
17 34
8
16
3219
6
U1
3VANALOG
5VCP
3VTCXO
C17
4.7UF
5VVCO
5VVCO
1
J3
1 2
JP6
3VDIGITAL
3VANALOG
5VCP
C35
100NF
2
3
4
6
7
U5
THS4031IDGN
C57
22UF
FB3
1000
FB4
1000
R27
DEPOP
C63
1NF
C1
1 2
JP4
4
3
16
U6
LP5900-3_3V
4
3
16
U2
LP5900-3_3V
C19
10PF
8
6
1
3
5
4
U8
LP3878MR-ADJ
1 2
JP5
12
10
8
6
4
2
7
5
3
1
11
9
J1
TLW-106-05-T-D
3VDIGITAL
SDO
CEN
R6
56
3VANALOG
C30
DEPOP
4
3
16
U4
LP5900-3_3V
C60
1NF
L1
DEPOP
1J2
3VDIGITAL
SEN
SDI
SCK
TP4
5016
1 2
JP3
C4
4.7UF
C31
100PF
C21
1NF
5VCP
3VANALOG
3VANALOG
1 2
JP1
R11
4.02K
1 2
JP2
R28
C64
R21
30
C62
R13
200
C61
3.9NF
R23
0
C39
1NF
C58
4.7UF
R14
10K
R15
10K
R22 0
R26
R12
R3
1K
R4
620
R25
2
1
4
Y2
C34
100NF
8
6
1
3
5
4
U9
LP3878MR-ADJ
C27
100NF
C24
10PF
C23
100NF
C22
10PF
C16
10PF
R24
1NF
C38
C65
C32
4.7UF
C33
1.2NF
C37
39NF
C8
10PF
C12
100NF
C10
10PF
C13
10PF
C2
10PF
C3
100NF
C7
100NF
C5
10PF
C14
100NF
R10
0
R5
10K
C15
100PF
3VDIGITAL
C54
100NF
C40
100NF
R2
120
R7
120
R9
10
3VTCXO
3VDIGITAL
C67
1.2NF
C55
10PF
C51
10PF
C52
100NF
R16
4.02K
3VDIGITAL
CEN
R8
100K
C28
100NF
C6
10PF
FB2
1000
SDO
TP5
5016
TP6
5016
C42
100NF
C59
4.7UF
R1
100K
TP2
5016
C29
100NF
R41
1K
C74
4.7UF
C73
10NF
C36
100NF
C68
4.7UF
C20
100NF
R40
4.02K
C11
100NF
C9
100NF
C18
100NF
C25
100NF
C26
10PF
C41
100NF
TP1
5016
R17
1K
C48
4.7UF
C47
10NF
C46
100NF
C45
4.7UF
C44
1.2NF
C43
100NF
C50
100NF
R18
10K
C49
4.7UF
C56
100NF
R19
10K
C53
4.7UF
TP3
5016
FB1
1000
R20
1K
NC
NC
NC
NC
3VANALOG
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 10
HMC807LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
Evaluation Circuit (Continued from page 9)
A
E
B
F
C
G
D
H
I
J
K
L
M
DEPOP
DEPOP
ADJ
BPASS
GND
VOUT
VIN
SD
GND
3FOUT
VC
VDD
DEPOP
DEPOP
DEPOP
DEPOP
DEPOP
DEPOP
EN
GND
VOUT VIN
ADJ
BPASS
GND
VOUT
VIN
SD
EN
GND
VOUT VIN
EN
GND
VOUT VIN
DEPOP
ACG
AVCC
AVDD
BIAS
CE
CP
DVDD
DVDDM
DVDDQ
GND
LD_SDO
NC
REFN
REFP
RFOUT
RVDD
SCK
SDI
SEN
VCCCP VCCPS
VCCVCO2
VDDCP
VDDIOVDDPFD
VTUNE
NC
NC
GND
GND
GND
NC
NC
VCCVCO1
NCNC
NC
GND
GND
GND
50 Ohm Trace
LD
+15V
5.5V
GND
RFout 50 Ohm Co-Planar Trace
TCXO
SYNTH
GND
Header to USB Board
GND
REFin
1
10
12
13
22
3
36
37
39
4
40
5
7
9
14
15
21
20
27
18
31
35
26
2
33
11
23
24
38
25
29
30
28
17 34
8
16
3219
6
U1
3VANALOG
5VCP
3VTCXO
C17
4.7UF
5VVCO
5VVCO
1
J3
1 2
JP6
3VDIGITAL
3VANALOG
5VCP
C35
100NF
2
3
4
6
7
U5
THS4031IDGN
C57
22UF
FB3
1000
FB4
1000
R27
DEPOP
C63
1NF
C1
1 2
JP4
4
3
16
U6
LP5900-3_3V
4
3
16
U2
LP5900-3_3V
C19
10PF
8
6
1
3
5
4
U8
LP3878MR-ADJ
1 2
JP5
12
10
8
6
4
2
7
5
3
1
11
9
J1
TLW-106-05-T-D
3VDIGITAL
SDO
CEN
R6
56
3VANALOG
C30
DEPOP
4
3
16
U4
LP5900-3_3V
C60
1NF
L1
DEPOP
1J2
3VDIGITAL
SEN
SDI
SCK
TP4
5016
1 2
JP3
C4
4.7UF
C31
100PF
C21
1NF
5VCP
3VANALOG
3VANALOG
1 2
JP1
R11
4.02K
1 2
JP2
R28
C64
R21
30
C62
R13
200
C61
3.9NF
R23
0
C39
1NF
C58
4.7UF
R14
10K
R15
10K
R22 0
R26
R12
R3
1K
R4
620
R25
2
1
4
Y2
C34
100NF
8
6
1
3
5
4
U9
LP3878MR-ADJ
C27
100NF
C24
10PF
C23
100NF
C22
10PF
C16
10PF
R24
1NF
C38
C65
C32
4.7UF
C33
1.2NF
C37
39NF
C8
10PF
C12
100NF
C10
10PF
C13
10PF
C2
10PF
C3
100NF
C7
100NF
C5
10PF
C14
100NF
R10
0
R5
10K
C15
100PF
3VDIGITAL
C54
100NF
C40
100NF
R2
120
R7
120
R9
10
3VTCXO
3VDIGITAL
C67
1.2NF
C55
10PF
C51
10PF
C52
100NF
R16
4.02K
3VDIGITAL
CEN
R8
100K
C28
100NF
C6
10PF
FB2
1000
SDO
TP5
5016
TP6
5016
C42
100NF
C59
4.7UF
R1
100K
TP2
5016
C29
100NF
R41
1K
C74
4.7UF
C73
10NF
C36
100NF
C68
4.7UF
C20
100NF
R40
4.02K
C11
100NF
C9
100NF
C18
100NF
C25
100NF
C26
10PF
C41
100NF
TP1
5016
R17
1K
C48
4.7UF
C47
10NF
C46
100NF
C45
4.7UF
C44
1.2NF
C43
100NF
C50
100NF
R18
10K
C49
4.7UF
C56
100NF
R19
10K
C53
4.7UF
TP3
5016
FB1
1000
R20
1K
NC
NC
NC
NC
3VANALOG
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 11
HMC807LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
Evaluation Circuit (Continued from page 10)
DEPOP
DEPOP
ADJ
BPASS
GND
VOUT
VIN
SD
GND
3FOUT
VC
VDD
DEPOP
DEPOP
DEPOP
DEPOP
DEPOP
DEPOP
EN
GND
VOUT VIN
ADJ
BPASS
GND
VOUT
VIN
SD
EN
GND
VOUT VIN
EN
GND
VOUT VIN
DEPOP
ACG
AVCC
AVDD
BIAS
CE
CP
DVDD
DVDDM
DVDDQ
GND
LD_SDO
NC
REFN
REFP
RFOUT
RVDD
SCK
SDI
SEN
VCCCP VCCPS
VCCVCO2
VDDCP
VDDIOVDDPFD
VTUNE
NC
NC
GND
GND
GND
NC
NC
VCCVCO1
NCNC
NC
GND
GND
GND
50 Ohm Trace
LD
+15V
5.5V
GND
RFout 50 Ohm Co-Planar Trace
TCXO
SYNTH
GND
Header to USB Board
GND
REFin
1
10
12
13
22
3
36
37
39
4
40
5
7
9
14
15
21
20
27
18
31
35
26
2
33
11
23
24
38
25
29
30
28
17 34
8
16
3219
6
U1
3VANALOG
5VCP
3VTCXO
C17
4.7UF
5VVCO
5VVCO
1
J3
1 2
JP6
3VDIGITAL
3VANALOG
5VCP
C35
100NF
2
3
4
6
7
U5
THS4031IDGN
C57
22UF
FB3
1000
FB4
1000
R27
DEPOP
C63
1NF
C1
1 2
JP4
4
3
16
U6
LP5900-3_3V
4
3
16
U2
LP5900-3_3V
C19
10PF
8
6
1
3
5
4
U8
LP3878MR-ADJ
1 2
JP5
12
10
8
6
4
2
7
5
3
1
11
9
J1
TLW-106-05-T-D
3VDIGITAL
SDO
CEN
R6
56
3VANALOG
C30
DEPOP
4
3
16
U4
LP5900-3_3V
C60
1NF
L1
DEPOP
1J2
3VDIGITAL
SEN
SDI
SCK
TP4
5016
1 2
JP3
C4
4.7UF
C31
100PF
C21
1NF
5VCP
3VANALOG
3VANALOG
1 2
JP1
R11
4.02K
1 2
JP2
R28
C64
R21
30
C62
R13
200
C61
3.9NF
R23
0
C39
1NF
C58
4.7UF
R14
10K
R15
10K
R22 0
R26
R12
R3
1K
R4
620
R25
2
1
4
Y2
C34
100NF
8
6
1
3
5
4
U9
LP3878MR-ADJ
C27
100NF
C24
10PF
C23
100NF
C22
10PF
C16
10PF
R24
1NF
C38
C65
C32
4.7UF
C33
1.2NF
C37
39NF
C8
10PF
C12
100NF
C10
10PF
C13
10PF
C2
10PF
C3
100NF
C7
100NF
C5
10PF
C14
100NF
R10
0
R5
10K
C15
100PF
3VDIGITAL
C54
100NF
C40
100NF
R2
120
R7
120
R9
10
3VTCXO
3VDIGITAL
C67
1.2NF
C55
10PF
C51
10PF
C52
100NF
R16
4.02K
3VDIGITAL
CEN
R8
100K
C28
100NF
C6
10PF
FB2
1000
SDO
TP5
5016
TP6
5016
C42
100NF
C59
4.7UF
R1
100K
TP2
5016
C29
100NF
R41
1K
C74
4.7UF
C73
10NF
C36
100NF
C68
4.7UF
C20
100NF
R40
4.02K
C11
100NF
C9
100NF
C18
100NF
C25
100NF
C26
10PF
C41
100NF
TP1
5016
R17
1K
C48
4.7UF
C47
10NF
C46
100NF
C45
4.7UF
C44
1.2NF
C43
100NF
C50
100NF
R18
10K
C49
4.7UF
C56
100NF
R19
10K
C53
4.7UF
TP3
5016
FB1
1000
R20
1K
NC
NC
NC
NC
3VANALOG
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 12
Outline Drawing
Part Number Package Body Material Lead Finish MSL Rating Package Marking [1]
HMC807LP6CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL3 H807
XXXX
[1] 4-Digit lot number XXXX
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15 mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05 mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR
SUGGESTED PCB LAND PATTERN.
Absolute Maximum Ratings
Nominal 3.3V Supplies to GND -0.3V to +3.6V
Nominal Digital Supply to 3.3V
Analog Supply -0.3V to +0.3V
Nominal 5V Supply to GND -0.3 to +5.5V
Vtune 0 to +15V
Storage Temperature -65 to +150°C
Max Peak Reow Temperature 260 °C
ESD Rating Class 1A
Reliability Information
Junction Temperature to Maintain
1 Million Hour MTTF 135 °C
Nominal Junction Temperature (T=85 °C) 120 °C
Thermal Resistance
(Junction to GND Paddle, 5V Supply) 34.2 °C/W
Operating Temperature -40 to +85°C
HMC807LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 13
HMC807LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
Evaluation PCB
The circuit board used in the application should use RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads and exposed paddle should be connected directly
to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the
top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ INTEGRATED VCO - SMT
7
7 - 14
Item Description
J1 Dual Row Terminal Strip
J2, J3 PCB Mount SMA RF Connector
JP1 - JP6 Single Row Terminal Strip
C1, C21, C38 - C39, C60 1000 pF Capacitor, 0402 Pkg.
C2, C5, C6, C8, C10, C13, C16,
C19, C22, C24, C26, C51, C55 10 pF Capacitor, 0402 Pkg.
C3, C7, C9, C11, C12, C14, C18, C20, C23,
C25, C27 - C29, C34 - C36, C40 - C43,
C46, C50, C52, C54, C56
0.1 µF Capacitor, 0402 Pkg.
C4, C17, C32, C45, C48,
C49, C53, C68, C74 4.7 µF Capacitor, 0805 Pkg.
C15, C31 100 pF Capacitor, 0402 Pkg.
C33, C44, C67 1200 pF Capacitor, 0402 Pkg.
C37 0.039 µF Capacitor, 0603 Pkg.
C47, C73 10,000 pF Capacitor, 0402 Pkg.
C57 22 µF Tantalum Capacitor, Case D
C58, C59 4.7 µF Tantalum Capacitor, Case B
C61 3900 pF Capacitor, 0402 Pkg.
FB1 - FB4 1000 Ohm 200 mA Ferrite Chip, 0805 Pkg.
R1, R8 100k Ohm Resistor, 0402 Pkg.
R2, R7 120 Ohm Resistor, 0402 Pkg.
R3, R17, R20, R41 1k Ohm Resistor, 0402 Pkg.
R4 620 Ohm Resistor, 0402 Pkg.
R5, R14, R15, R18, R19 10k Ohm Resistor, 0402 Pkg.
R6 56 Ohm Resistor, 0402 Pkg.
R9 10 Ohm Resistor, 0402 Pkg.
R10, R22, R23 Zero Ohm Resistor, 0402 Pkg.
R11, R16, R40 4.02k Ohm Resistor, 0402 Pkg.
R13 200 Ohm Resistor, 0402 Pkg.
R21 30 Ohm Resistor, 0402 Pkg.
TP1 - TP6 Test Point PC Compact SMT
U1 HMC764LP6CE Fractional-N PLL, with
Integrated VCO
U2, U4, U6 Low Noise 3.3V, 100 mA Linear Regulator
U5 Low Noise Op-Amp, THS4031IDGN
U8, U9 5V, 800mA Voltage Regulator
Y2 3.3V, 50 MHz VCXO Crystal Oscillator
PCB [2] 125536 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR and FR4
List of Materials for Evaluation PCB 127283 [1]
HMC807LP6CE
v03.0411
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 12.4 - 13.4 GHz
