- 328 -
.161(4.1)
MAX
.124(3.16)
MAX
.185(4.7)
MAX
.272(6.9)
.248(6.3)
.055(1.4)
MAX
.035(0.9)
MAX
.100(2.55)
.543(13.8)
.512(13.2)
.100(2.55)
.110(2.8)
.098(2.5)
.030(0.76)
MAX
.606(15.5)
.583(14.8)
.112(2.85)
.100(2.55)
.406(10.3)MAX
.134(3.4)DIA
.113(3.0)DIA
GPF1001 THRU GPF1007
Isolation 10.0 AMPS. Glass Passivated Rectifiers
Voltage Range
50 to 1000 Volts
Current
10.0 Amperes
Features
a Low forward voltage drop
a High current capability
a High reliability
a High surge current capability
Mechanical Data
a Cases: ITO-220AB molded plastic
a Epoxy: UL 94V-0 rate flame retardant
a Terminals: Leads solderable per MIL-STD-
Terminals: 202, Method 208 guaranteed
a Polarity: As marked
a High temperature soldering guaranteed:
250°C/ 0.25” (6.35mm) from case 10
seconds
a Mounting torque: 5 in – 1bs max.
a Weight: 2.24 grams
ITO-220AB
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number GPF
1001 GPF
1002 GPF
1003 GPF
1004 GPF
1005 GPF
1006 GPF
1007 Unit
s
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Voltage 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
@TC = 100°C 10.0 A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
(JEDEC method ) 125 A
Maximum Instantaneous Forward Voltage
@5.0A 1.1 V
Maximum DC Reverse Current @ TC=25°C
at Rated DC Blocking Voltage @ TC=125°C 5.0
100 uA
uA
Typical Junction Capacitance ( Note 1) 30 pF
Typical Thermal Resistance RÛJC (Note 2) 5.0 °C/W
Operating and Storage Temperature Range
TJ,TSTG - 65 to + 150 °C
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
Notes: 2. Thermal Resistance from Junction to Case per Leg Mounted on Heatsink.
PIN 1
PIN 3
Positive CT PIN 2
REVISED 1, 05/09/2003
- 329 -
FIG.2- MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
PEAK FORWARD SURGE CURRENT. (A)
12 5 10 20 10050
25
0
50
75
125
100
150
175
NUMBER OF CYCLES AT 60Hz
8.3ms Single Half Sine Wave
JEDEC Method
FIG.3- TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER LEG
INSTANTANEOUS FORWARD CURRENT. (A)
.6 .8 1.0 1.2 1.4 1.6 1.8 2.0
0.1
0.4
0.2
1
4
2
10
20
40
100
200
400
FORWARD VOLTAGE. (V)
FIG.4- TYPICAL REVERSE CHARACTERISTICS
PER LEG
INSTANTANEOUS REVERSE CURRENT.( A)
020 40 60 80 100 120 140
.1
.4
.2
1.0
4
40
2
10
100
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
Tj=25 C
0
Tj=125 C
0
FIG.5- TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE.(pF)
0.1 0.5 1.0 4 10 40 100 1000400
20
0
40
60
100
80
120
REVERSE VOLTAGE. (V)
Tj=25 C
0
f=10 MHz
Vsig 50Mvp-p
FIG.1- MAXIMUM FORWARD CURRENT DERATING
CURVE
AVERAGE FORWARD CURRENT. (A)
050 100 150
2
4
6
8
10
12
CASE TEMPERATURE. ( C)
o
Single Phase
Half Wave 60Hz
Resistive of
Inductive Load
RATINGS AND CHARACTERISTIC CURVES (GPF1001 THR GPF1007)U
Tj=25 C
Pulse Width=300 s
1% Duty Cycle
o
