Miniature Rockers General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 6A @ 125V AC & 3A @ 250V AC 4A @ 30V DC for On-None-On; 3A @ 30V DC for all other circuits Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Logic/Power Level (gold over silver): Combines silver & gold ratings Note: Find additional explanation of dual rating & operating range in Supplement section. Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw: 10 milliohms maximum for silver; 20 milliohms maximum for gold 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts and case for 1 minute minimum 50,000 operations minimum 25,000 operations minimum for silver; 50,000 operations minimum for gold; 50,000 operations minimum for silver at 3A @ 125V AC 25 Materials & Finishes Rotaries B Actuator Clip & Mounting Frame: Body Frame: Case: Movable Contactor: Movable Contacts: Stationary Contacts: Slides Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles Series M Terminals: Stainless Steel Stainless steel Diallyl phthalate resin (UL94V-0) Phosphor bronze with silver or gold plating Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Silver with silver plating (code W); copper or brass with gold plating (code G); or silver with gold plating (code A) Copper or brass with silver plating; or copper or brass with gold plating Environmental Data Tactiles Operating Temp Range: Humidity: Vibration: Processing Soldering: Touch Tilt Shock: Wave Soldering (PC version) for Gold: See Profile A in Supplement section. Manual Soldering for Gold: See Profile A in Supplement section. Wave Soldering (PC version) for Silver: See Profile B in Supplement section. Manual Soldering for Silver: See Profile B in Supplement section. Note: Actuator must be in OFF (center) position while soldering. These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL: UL94V-0 for case File No. E44145 - Recognized only when ordered with marking on switch. Add "/U" or "/CUL " before first dash in part number to order UL recognized switch. All models recognized at 6A @ 125V AC, 3A @ 250V AC or 0.4VA maximum @ 28V DC maximum. CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch. Add "/C" before first dash in part number to order CSA certified switch. All models certified at 6A @ 125V AC or 3A @ 250V AC or 0.4VA maximum @ 28V maximum. Supplement Accessories Indicators Cleaning: -30C through +85C (-22F through +185F) 90 ~ 95% humidity for 96 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) B62 www.nkkswitches.com 3/13/17 Distinctive Characteristics B Pushbuttons Three methods of panel mounting: flat frame for flush with face or subpanel, snap-in, and PCB. Rockers Toggles Series M Miniature Rockers Programmable Illuminated PB High insulating barriers increase isolation of circuits in multipole devices and provide added protection to contact points. The molded diallyl phthalate case has a UL 94V-0 flammability rating. Epoxy sealed terminals prevent entry of solder flux and other contaminants. Keylocks Prominent external insulating barriers increase insulation resistance and dielectric strength. Slides Rotaries Bias guard prevents misalignment of contacts; interlocking of actuator block with rocker and internal guide does not allow transmission of diagonal force on rocker to reach contact mechanism. Page B64 Bracket PC Mount Page B72 Flat Frame Mount Page B83 Indicators Snap-in Mount www.nkkswitches.com B63 Supplement Accessories Actual Size Touch Tilt Tactiles Clinching of the frame to the case well above the base and terminals provides 1,500V dielectric strength. Series M TYPICAL SWITCH B M20 1 TJ 2 W F 01 Poles Rockers & Paddles 1 SPDT 2 DPDT SP3T F .450" (11.43mm) Wide Rocker Terminals G .450" (11.43mm) Wide Paddle 01 Solder Lug S 02 Quick Connect .453" (11.5mm) False Illluminated Rocker in Black only 03 .250" (6.35mm) Straight PC 05 .425" (10.8mm) Wirewrap Rocker & Paddle Colors 06 .750" (19.05mm) Wirewrap A Black .964" (24.5mm) Wirewrap B White 07 C Red 08 1.062" (27.0mm) Wirewrap E Yellow Mounting Frame TJ Snap-in Frame Circuits 2 ON 3 ON OFF ON 5 ON NONE (ON) 8 (ON) OFF (ON) 9 ON OFF (ON) *4 ON ON ON F Green *6 (ON) ON (ON) G Blue *7 ON ON (ON) H Gray NONE ON ( ) = Momentary Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles Snap-In Mount Miniature Rockers Contact Materials & Ratings W Silver; Rated 6A @ 125V AC & 3A @ 250V AC G Gold; Rated 0.4VA max @ 28V AC/DC max A Gold over Silver; Rated 6A @ 125V AC & 0.4VA max @ 28V AC/DC max Touch Tilt Tactiles * 3-ON circuits DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Indicators M2012TJW01-FC-1A Accessories Red .450" (11.43mm) Wide Rocker Black Bezel without LED SPDT ON-NONE-ON Circuit Snap-in Frame Silver Contacts with 6-Amp Rating Supplement Solder Lug Terminals B64 www.nkkswitches.com C Series M ORDERING EXAMPLE A Bezel with 2 Round LEDs 4 Bezel with 2 Rectangular LEDs White E Yellow F Green G Blue H Gray A Black A Programmable Illuminated PB B 1 LED C Red F Green 2 LEDs Black Top LED Bottom LED C Red C Red E Yellow E Yellow F Green F Green Tactiles 3 Black Keylocks Bezel with 1 Round LED A IMPORTANT: Touch Tilt Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on the General Specifications page. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Red .450" (11.43mm) Wide Rocker Indicators M2012TJW01-FC-3A-CF Top LED Red Bottom LED Green Snap-in Frame Accessories 2 Bezel without LED LED Colors Black Bezel with 2 Round LEDs SPDT ON-NONE-ON Circuit Silver Contacts with 6-Amp Rating Solder Lug Terminals Supplement 1 Bezel Colors Rotaries Optional Bezels Pushbuttons B Slides 1 Rockers Toggles Snap-In Mount Miniature Rockers www.nkkswitches.com B65 Series M Toggles Snap-In Mount Miniature Rockers POLES & CIRCUITS Rocker Position ) = Momentary Programmable Illuminated PB Pushbuttons Rockers ( B Connected Terminals Down Center Up Down Pole Model SP M2012 M2013 M2015 M2018 M2019 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) M2022 M2023 M2025 M2028 M2029 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) DP Throw & Schematics Center Up Note: Terminal numbers are not actually on the switch. SPDT 2-3 OPEN 2 (COM) 2-1 3 1 DPDT 2-3 5-6 OPEN 2 2-1 5-4 3 (COM) 1 5 6 4 For 3 Throw (3-On) Pole Model Down Center Up SP M2024 M2026 M2027 ON (ON) ON ON ON ON ON (ON) (ON) Rotaries Keylocks Connected Terminals & Schematic External Connection 2 (in) 5 Slides 1 (out) 3 4 (out) 6 (out) 2-3 5-6 External Connection 2 (in) 5 1 (out) External Connection The SP3T model utilizes a double pole base. External Connection 2 (in) 5 3 4 (out) 6 (out) 1 (out) 2-3 5-4 3 4 (out) 6 (out) External connection must be made during field installation. (out) External Conn 6 3 5 2 4 1 (out) Common (in) (out) 2-1 5-4 Tactiles TJ Tilt MOUNTING FRAME (18.0) .710 Panel Cutout for Single Pole without Bezel Snap-in Frame Touch Panel Cutout for Double Pole without Bezel (12.5) .492 25 (2.54) Dia .100 (12.2) .480 (15.9) .626 (4.3) .170 (15.9) .626 (13.1) .516 Panel Thickness without Bezel: .039" ~ .126" (1.0mm ~ 3.2mm) Panel Thickness with Bezel: .039" ~ .098" (1.0mm ~ 2.5mm) Accessories Indicators CONTACT MATERIALS & RATINGS W Silver over Silver Power Level 6A @ 125V AC & 3A @ 250V AC G Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Note: See Supplement section to find complete explanation of operating range. Supplement A Gold over Silver Power Level or Logic Level 6A @ 125V AC or 0.4VA maximum @ 28V AC/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section to find complete explanation of dual rating and operating range. B66 www.nkkswitches.com Series M TERMINALS .062" (1.57mm) Wide Quick Connect 02 (4.0) .157 (2.0) .079 (2.0) (1.1) .079 .043 Thk = (0.8) .031 (1.57) .062 Thk = (0.8) .031 (4.8) .189 .250" (6.35mm) Straight PC 3 (6.35) (4.8) .250 .189 Epoxy Seal 2 (4.7) Typ .185 1 .425" (10.8mm) Wirewrap or Extended PC 06 .750" (19.05mm) Wirewrap or Extended PC 07 .964" (24.5mm) Wirewrap or Extended PC 08 1.062" (27.0mm) Wirewrap or Extended PC 6 2 5 1 4 (1.8) Dia Typ .073 (1.17) .046 Thk = (0.8) .031 05 3 (4.7) Typ .185 Programmable Illuminated PB 03 B (6.35) .250 Epoxy Seal Pushbuttons Epoxy Seal (1.8) Dia Typ .073 Single Pole Double Pole If using as extended PC terminal, refer to the above footprints. Epoxy Seal A Dimension A = Keylocks Solder Lug terminal lengths as shown beside the terminal codes at the left. (1.27) .050 Thk = (0.8) .031 Rotaries 01 (9.19) .362 Material: Polyamide Finish: Matte (11.43) .450 (16.36) .644 (5.84) R .230 Colors Available: A, B, C, E, F, G, H (11.43) .450 (11.8) .465 (1.8) .071 Touch (1.8) .071 (11.8) .465 AT466 .453" (11.5mm) False Illuminated Rocker (8.6) .339 False Illuminator Acrylonitrile Butadiene Styrene (11.3) .445 Indicators Material: Finish: Colors: Rocker Polycarbonate Glossy Black (7.7) .303 White and Red (1.8) .071 (11.5) .453 Accessories S (2.36) .093 Material: Polyamide Finish: Matte (7.11) (6.3) .280 .248 Colors Available: A, B, C, E, F, G, H AT4151 .450" (11.43mm) Wide Paddle Tactiles G Tilt AT4150 .450" (11.43mm) Wide Rocker Slides ROCKERS & PADDLES F (11.8) .465 A Black B White C Red E Yellow www.nkkswitches.com F Green G Blue H Supplement When a bezel is selected with AT466, glossy polycarbonate AT207 is supplied. Cap Colors Available: Rockers Toggles Snap-In Mount Miniature Rockers Gray B67 Series M OPTIONAL SNAP-IN BEZELS & BEZEL COLORS 1 B AT2107 Bezel AT208 Bezel for AT070 LED Material: Polycarbonate Yellow A (11.8) .465 (19.0) .748 Single Pole Double Pole Gray (15.6) .614 AT212 Bezel for AT617 LED A (13.1)mm .516" B (6.25)mm .246" (6.55)mm .258" A (12.0) .472 (10.0) .394 Finish: Semi-glossy (8.0) .315 Tilt Touch Finish: Semi-glossy (10.0) .394 (8.0) .315 A (15.9) .626 A Single Pole Double Pole A A (12.0) .472 (2.2) .087 (18.4)mm .724" Black (21.5) Sq .846 (18.7)mm .736" (15.9) .626 LED colors & specifications on next page. (7.8) .307 (11.8) .465 (5.0) Typ .197 (15.9) .626 LED colors & specifications on next page. (2.2) .087 (7.8) .307 (11.8) .465 (21.5) Sq .846 (2.0) Typ .079 (8.8) Dia .346 A Single Pole Double Pole A (18.4)mm .724" (18.7)mm .736" Bezel Assembly 1. Pry out tab on bezel to a 45 angle. Accessories Indicators AT213 Bezel for AT618 LED (13.1)mm .516" (13.8) .543 Black Tactiles (3.0) Dia Typ .118 (12.5)mm .492" B (12.5)mm .492" (30.2) 1.19 (5.4) Dia .213 Material: Polycarbonate A LED colors & specifications on next page. (12.0) .472 Contact factory for matte finish. 4 A Blue Single Pole Double Pole Finish: Glossy 3 H (15.9) .626 Green Black (2.2) .087 (13.5) .531 Material: Polycarbonate Slides E (21.5) .846 G White (12.0) .472 (15.6) .614 F Black B (2.2) .087 Finish: Matte 2 A (11.8) .465 Material: Polyamide Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles Snap-In Mount Miniature Rockers Tab 2. Insert switch frame under tab and snap on bezel. 3. Push tab back into place. 45 Supplement Tab B68 www.nkkswitches.com 4. Snap assembled bezel and switch into panel. Series M Toggles Snap-In Mount Miniature Rockers LED COLORS & SPECIFICATIONS B (5.0) .197 (5.0) .197 Top LED Circuit Mark This Side Circuit Mark This Side Top LED Bottom LED (7.0) .276 (+) (-) Bottom LED Programmable Illuminated PB (7.7) .303 Pushbuttons (3.0) Dia .118 (-) (+) (-) (+) Note: Lead lengths may differ from manufacturing lot to lot. The longer lead is the anode (+). AT617 AT618 Keylocks AT070 C F C E F C E F Color Red Green Red Yellow Green Red Yellow Green Maximum Forward Current IFM 25mA 50mA 30mA 30mA 25mA 25mA 30mA 25mA Typical Forward Current IF 20mA 30mA 20mA 20mA 20mA 20mA 20mA 20mA Forward Voltage VF 2.8V 2.1V 2.0V 2.1V 2.25V 2.25V 2.1V 2.2V Maximum Reverse Voltage VRM 4V 5V 5V 5V 5V 5V 5V 5V Current Reduction Rate Above 25C IF 0.33 mA/C 0.40 mA/C 0.40 mA/C 0.40 mA/C 0.33 mA/C 0.33 mA/C 0.40 mA/C 0.33 mA/C (-) Ambient Temperature Range (when used with a bezel) -10 ~ +70C -15 ~ +70C -25 ~ +70C Tactiles (+) The electrical specifications shown are determined at a basic temperature of 25C. LED circuit is independent of switch operation. LED is colored in OFF state. Tilt If the source voltage is greater than the rated voltage of the LED, a ballast resistor must be connected in series with the lamp. The ballast resistor calculation and more lamp detail are shown in the Supplement section. Touch LEGENDS Indicators NKK Switches can provide custom legends for caps. Contact factory for more information. Suggested Printable Area for Cap (0.76) Typ .030 Pad Print Epoxy based ink is recommended. (4.5) Typ .177 AT4150 www.nkkswitches.com (9.91) .390 (11.43) .450 Accessories Recommended Print Method: (0.38) Typ .015 (0.76) Typ (3.36) Typ .132 .030 Supplement F OF ON Rotaries (5.08) Dia .200 AT618 LED For Bezel AT213 with 2 Rectangular LEDs Slides AT617 LED For Bezel AT212 with 2 Round LEDs Circuit Mark This Side AT070 LED For Bezel AT208 with 1 LED Rockers Bezel Orientation on Switch Shaded areas are printable areas. B69 Series M Toggles Snap-In Mount Miniature Rockers TYPICAL SWITCH DIMENSIONS (4.9) .194 (2.8) Circuit Mark .110 This Side (1.1) x (2.0) Typ .043 x .079 3 (18.0) .709 (4.7) Typ .185 25 (0.5) .020 (7.1) .279 (3.3) .130 (13.0) .512 2 (0.8) Typ .031 (11.43) .450 (12.2) .480 1 (2.0) Typ .079 (0.5) .020 (9.4) .371 (7.9) .311 (4.5) .177 M2012TJW01-FC Snap-in Frame * Solder Lug Double Pole (4.9) .194 Keylocks Programmable Illuminated PB Single Pole B Pushbuttons Rockers Snap-in Frame * Solder Lug Rotaries (18.0) .709 (2.8) Circuit Mark .110 This Side (4.7) Typ .185 25 (0.8) Typ .031 (11.43) .450 (12.2) .480 (0.5) .020 (7.1) .279 (3.3) .130 (4.8) .189 (1.1) x (2.0) Typ .043 x .079 3 6 5 2 4 1 (13.0) .512 (0.5) .020 (9.4) .371 (2.0) Typ .079 (4.5) .177 (12.7) .500 Slides M2022TJW01-FC Snap-in Frame * Solder Lug Single Pole Circuit Mark This Side Tactiles (2.8) .110 (1.1) x (2.0) Typ .043 x .079 3 (18.0) .709 (4.7) Typ .185 25 (2.36) .093 (3.18) .125 (13.7) .539 Snap-in Frame * Solder Lug (2.0) Typ .079 (0.5) .020 (9.4) .371 (7.9) .311 (4.5) .177 Double Pole (2.8) .110 Circuit Mark This Side (4.8) .189 (1.1) x (2.0) Typ .043 x .079 6 (18.0) .709 Accessories Supplement (0.5) .020 (7.1) .279 M2012TJW01-GC Indicators Touch Tilt (0.8) Typ .031 (11.43) .450 (12.2) .480 (13.0) .512 2 1 (4.7) Typ .185 25 (0.8) Typ .031 (2.36) .093 (11.43) .450 (12.2) .480 (3.18) .125 (13.7) .539 M2022TJW01-GC B70 www.nkkswitches.com (0.5) .020 (7.1) .279 (9.4) .371 (4.5) .177 (0.5) .020 3 5 2 4 1 (12.7) .500 (13.0) .512 (2.0) Typ .079 Series M Toggles Snap-In Mount Miniature Rockers TYPICAL SWITCH DIMENSIONS (4.8) .189 1 (0.8) Typ .031 (4.3) .169 (2.2) .087 (6.4) .252 (4.01) .158 (9.4) .371 Double Pole (4.9) .193 Circuit Mark (1.1) x (2.0) Typ This Side .043 x .079 (13.5) .531 (12.0) .472 (2.5) .098 (0.61) Sq .024 (4.7) Typ .185 25 (0.8) Typ .031 (11.43) .450 (11.8) .465 (15.6) .614 (4.3) .169 (2.2) .087 (6.4) .252 (4.01) .158 (5.6) .221 (7.8) .307 3 2 4 1 (0.5) .020 (4.5) .177 (9.4) .371 (13.0) .512 (14.0) .551 (2.0) Typ .079 (4.8) .189 (12.7) .500 Single Pole (10.0) .394 6 5 Keylocks (30.2) 1.190 M2012TJW01-FC-1A Snap-in Frame * AT208 Bezel * Solder Lug (15.3) Min .602 (19.0) .748 1 Rotaries (5.08) Dia .200 4 (13.0) .512 (14.0) .551 (12.7) .500 (7.9) .311 (4.5) .177 2 (2.0) Typ .079 (2.0) .079 (0.5) .020 5 M2022TJW01-FC-2A-C Snap-in Frame * AT212 Bezel * Solder Lug Circuit Mark This Side (1.1) x (2.0) Typ .043 x .079 Tactiles (11.43) .450 (11.8) .465 (15.6) .614 (13.0) .512 (14.0) .551 2 Pushbuttons (4.7) Typ .185 25 3 (8.0) .315 (12.0) .472 (4.7) Typ .185 25 (13.0) .512 (14.0) .551 2 (0.8) Typ .031 1 (4.01) .158 (9.4) .371 (4.5) .177 (0.5) .020 Double Pole (10.0) .394 (5.6) .221 (7.8) .307 (8.0) .315 (12.0) .472 Circuit Mark This Side (2.0) .079 (7.9) .311 M2012TJW01-FC-3A-CF Snap-in Frame * AT213 Bezel * Solder Lug (1.1) x (2.0) Typ .043 x .079 (4.7) Typ .185 25 (0.8) Typ .031 6 3 5 2 4 1 (13.0) .512 Indicators (4.3) .169 (2.2) .087 (6.4) .252 (14.0) .551 Accessories (11.43) .450 (11.8) .465 (21.5) Sq .846 Tilt (3.0) Dia Typ .118 (5.0) Typ .197 (2.0) .079 (11.43) .450 (11.8) .465 (21.5) Sq .846 (4.01) .158 (4.3) .169 (2.2) .087 (6.4) .252 (0.5) .020 (9.4) .371 (4.5) .177 (4.8) .189 (12.7) .500 (2.0) Typ .079 M2022TJW01-FC-4A-CF www.nkkswitches.com Touch (12.0) .472 B71 Supplement (21.5) .846 B 3 6 3 Programmable Illuminated PB Circuit Mark This Side Rockers Snap-in Frame * AT2107 Bezel * Solder Lug (1.1) x (2.0) Typ .043 x .079 Slides Single & Double Pole (5.6) .221