FR801K THRU FR807K FAST RECOVERY GLASS PASSIVATED RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Amperes FEATURES Fast switching Low leakage Low forward voltage drop High current capability High surge capability High reliability MECHANICAL DATA .217 (5.5) .201 (5.1) Case: D-PAK molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.33 grams .098 (2.5) .083 (2.1) .024 (0.6) .016 (0.4) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Single phase, half wave, 60 Hz, resistive or inductive load. .031 (0.8) .183 (4.65) .179 (4.55) For capacitive load, derate current by 20%. .382 (9.71) PIN2 TYP .091 (2.30) Ratings at 25 o C ambient temperature unless otherwise specified. TYP 1.00 PIN1 .398 (10.11) PIN3 .244 (6.2) * * * * * .051 (1.3) .264 (6.7) .248 (6.3) .035 (0.9) D-PAK .228 (5.8) * * * * * * TYP .020 (0.50) .016 (0.4) PIN 1 PIN 3 PIN 2 HEATSINK Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL FR801K FR802K FR803K FR804K FR805K FR806K FR807K UNITS Maximum Recurrent Peak Reverse Voltage RATINGS VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 75 o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range IO 8.0 Amps I FSM 200 Amps R q JC 3 R q JA 16 CJ 50 T J, T STG -55 to + 150 0 C/ W pF 0 C ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted) O CHARACTERISTICS Maximum Instantaneous Forward Voltage at 8.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C @T A = 100 o C Maximum Reverse Recovery Time (Note 3) SYMBOL FR801K FR802K FR803K VF trr FR805K FR806K FR807K 1.3 uAmps 150 150 UNITS Volts 2 IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. Test conditions: IF= 0.5A, IR= -0.1A, IRR=-0.25A. 4. "Fully ROHS compliant", "100% Sn plating (Pb-free)". 5. Suffix "R" for Reverse Polarity. 6. Suffix "S" for D2-PAK Pkg. FR804K 250 500 nSec 2006-12 RATING AND CHARACTERISTICS CURVES ( FR801K THRU FR807K ) INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 10 8 6 4 Single Phase Half Wave 60 Hz Inductive or Resistive Load 2 0 0 50 100 150 40 20 10 4 1.0 0.4 0.1 O 200 CT, JUNCTION CAPACITANCE, (pF) 1000 TA = 100 OC 100 10 TA = 25 OC 1.0 0.1 0 20 40 60 80 100 0 0.5 1.0 1.5 2.5 3.0 3.5 120 FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 60 40 20 10 6 4 2 0 140 T J = 25 OC 0.1 0.2 0.4 1.0 PERCENT RATED PEAK REVERSE VOLTAGE, (%) 2 10 20 40 100 FIG.4 TYPICAL JUNCTION CAPACITANCE 200 8.3mS Single Half Sine-Wave JEDEC Method 100 2 4 REVERSE VOLTAGE, (V) FIG.3 TYPICAL REVERSE CHARACTERISTICS 0 1 2.0 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (mA) AMBIENT TEMPERATURE, ( C) T A = 25 OC Pulse Width = 300mS 1% Duty Cycle 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.