PMR209 * RC unit, class X2, metallized paper with integrated resistor * 0.047 - 0.47 F, 22 - 470 , 250 VAC, +85 C * High dU/dt capability. * Self-extinguishing encapsulation. * Good resistance to ionisation due to impregnated dielectric. TYPICAL APPLICATIONS RC unit for use in DC and AC applications for: - contact protection - interference suppression of contacts - transient suppression * The impregnated paper ensures excellent stability giving outstanding reliability properties, especially in applications having continuous operation. CONSTRUCTION Single layer metallized paper. Encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94V0. The resistance in the metal layer is utilized as series resistance, integrated resistor. L B H * Small dimensions * Excellent self-healing properties. Ensures long life even when subjected to frequent overvoltages. p 0.5 d l TECHNICAL DATA Rated voltage 250 VAC 50/60 Hz, 630 VDC Capacitance range Capacitance tolerance 0.047 - 0.47 F 20% Resistance range Resistance tolerance 22 - 470 30% Peak pulse voltage 1000 V Temperature range Climatic category -40 to +85C 40/085/56/B Approvals S, N, D, FI, VDE, SEV, UL Series resistance The series resistance is defined at 1 kHz for RC 50 s and at 100 kHz for RC < 50 s. Insulation resistance 3000 M for C 0.33 F 1000 s for C > 0.33 F Measured at 500 VDC after 60 s, +23C R C d = 0.8 for p = 15.2 and 20.3 1.0 for p = 25.4 Pulse current Max 12 A repetitive. Max 20 A peak for occasional transients. Test voltage between terminals The 100% screening factory test is carried out at 1800 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. In DC applications Recommended voltage 630 VDC. Power ratings The average losses may reach 0.5 W provided the surface temperature does not exceed + 85C. For max. permitted power dissipation vs temperature, see derating curves. Curve Dimensions 1 2 3 4 B = 7.3 B = 7.6 B = 11.3 B = 15.3 l: standard: 30 +5/-0 mm (code R30) option: short leads, tolerance +0/-1 mm (standard 6 mm, code R06) Other lead lengths on request. Pmax W 1 0.5 0 2 3 4 Tamb 40 50 60 70 80 85 C Maximum allowable power dissipation vs ambient temperature and case sizes. ENVIRONMENTAL TEST DATA Vibration IEC 60068-2-6, Test Fc Bump IEC 60068-2-29, Test Eb 3 directions at 2 hour each No visible damage, No open or short circuit 10 - 500 Hz at 0.75 mm or 98 m/s2 4000 bumps at 390 m/s2 No visible damage, No open or short circuit Solderability IEC 60068-2-20, Test Ta Solder globule method Active flammability EN 132400 Passive flammability IEC 60384-14 (1993), EN 132400 Humidity IEC 60068-2-3, Test Ca 196 +40C and 90 - 95% R.H. Wetting time 56 days for d 0.8 < 1 s for d > 0.8 < 1.5 s PMR209 Capacitance F Resis- Max dimensions in mm tance B H L p Quantity per package reel Weight R30 R06 taped pcs pcs pcs g S N D FI VDE SEV UL ARTICLE TABLE Approvals Article code 0.047 0.047 47 100 7.3 7.3 13.0 13.0 19.0 19.0 15.2 15.2 400 400 800 800 400 400 3.0 3.0 PMR209MB5470M047R30 PMR209MB5470M100R30 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 22 33 47 68 100 150 220 330 470 7.6 7.6 7.6 7.6 7.6 11.3 11.3 11.3 11.3 14.0 14.0 14.0 14.0 14.0 16.5 16.5 16.5 16.5 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 250 250 250 250 250 150 150 150 150 1500 1500 1500 1500 1500 1500 1500 1500 1500 250 250 250 250 250 180 180 180 180 4.0 4.0 4.0 4.0 4.0 7.0 7.0 7.0 7.0 PMR209MC6100M022R30 PMR209MC6100M033R30 PMR209MC6100M047R30 PMR209MC6100M068R30 PMR209MC6100M100R30 PMR209MC6100M150R30 PMR209MC6100M220R30 PMR209MC6100M330R30 PMR209MC6100M470R30 0.22 0.22 0.22 0.22 0.22 0.22 0.22 22 33 47 68 100 150 220 11.3 11.3 11.3 11.3 11.3 11.3 11.3 16.5 16.5 16.5 16.5 16.5 16.5 16.5 24.0 24.0 24.0 24.0 24.0 24.0 24.0 20.3 20.3 20.3 20.3 20.3 20.3 20.3 150 150 150 150 150 150 150 1500 1500 1500 1500 1500 1500 1500 180 180 180 180 180 180 180 7.0 7.0 7.0 7.0 7.0 7.0 7.0 PMR209MC6220M022R30 PMR209MC6220M033R30 PMR209MC6220M047R30 PMR209MC6220M068R30 PMR209MC6220M100R30 PMR209MC6220M150R30 PMR209MC6220M220R30 0.22 0.22 0.47 0.47 0.47 0.47 0.47 0.47 330 470 33 47 68 100 150 220 12.1 15.3 15.3 15.3 15.3 15.3 15.3 15.3 19.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 30.5 30.5 30.5 30.5 30.5 30.5 30.5 30.5 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 100 75 75 75 75 75 75 75 800 600 600 600 600 600 600 600 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 PMR209ME6220M330R30 PMR209ME6220M470R30 PMR209ME6470M033R30 PMR209ME6470M047R30 PMR209ME6470M068R30 PMR209ME6470M100R30 PMR209ME6470M150R30 PMR209ME6470M220R30 MARKING APPROVALS/REFERENCE DOCUMENTS Certification Body Specification Approval reference S N D Fl VDE SEV UL EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 UL 1283 9528104 P951 03084 304424 184789-01 91805 00-1929 E 100117 ORDERING INFORMATION The article code for the standard part is given in the article table. For other options, see page 21. * * * * * * * * RIFA RIFA article code RC unit Rated capacitance and resistance Rated voltage X2 SH, for self-healing Climatic category according to IEC 60068-1, appendix A * Passive flammability class * Circuit diagram * Manufacturing code (year, month) PACKING RC units in standard design (lead length 30 mm) and with L < 24 mm and lead length 5 or 6 mm are packed bulk in a box with dimensions 245 x 145 x 80 mm. Quantity/ package as per article table. RC units with L 24 mm and lead length 5 or 6 mm are packed on trays piled in a box with dimensions 300 x 260 x 195 mm. Quantity/package as per article table. Reels with taped capacitors are packed 10 in a box with dimensions 370 x 370 x 560 mm. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. 197