MCP3421EV - MICROCHIP - Datasheet.Directory

MCP3421 SOT23-6

Evaluation Board

User’s Guide

Information contained in this publication regarding device

applications and the like is provided only for your convenience

and may be superseded by updates. It is your responsibility to

ensure that your application meets with your specifications.

MICROCHIP MAKES NO REPRESENTATIONS OR

WARRANTIES OF ANY KIND WHETHER EXPRESS OR

IMPLIED, WRITTEN OR ORAL, STATUTORY OR

OTHERWISE, RELATED TO THE INFORMATION,

INCLUDING BUT NOT LIMITED TO ITS CONDITION,

QUALITY, PERFORMANCE, MERCHANTABILITY OR

FITNESS FOR PURPOSE. Microchip disclaims all liability

arising from this information and its use. Use of Microchip

devices in life support and/or safety applications is entirely at

the buyer’s risk, and the buyer agrees to defen d, indemnify and

hold harmless Microchip from any and all damages, claims,

suits, or expenses resulting from such use. No licenses are

conveyed, implicitly or otherwise, under any Microchip

intellectual property rights.

Trademarks

The Microchip name and logo, the Microchip logo, Accuron,

dsPIC, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro,

PICSTART, rfPIC, SmartShunt and UNI/O are registered

trademarks of Microchip Technology Incorporated in the

U.S.A. and other countries.

FilterLab, Linear Active Thermistor, MXDEV, MXLAB,

SEEV AL, SmartSensor and The Embedded Control Solutions

Company are registered trademarks of Microchip Technology

Incorporated in the U.S.A.

Analog-for-the-Digital Age, Application Maestro, CodeGuard,

dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,

ECONOMONITOR, FanSense, In-Circuit Serial

Programming, ICSP, ICEPIC, Mindi, MiWi, MPASM, MPLAB

Certified logo, MPLIB, MPLINK, mTouch, PICkit, PICDEM,

PICDEM.net, PICtail, PIC32 logo, PowerCal, PowerInfo,

PowerMate, PowerTool, REAL ICE, rfLAB, Select Mode, Total

Endurance, WiperLock and ZENA are trademarks of

Microchip Technology Incorporated in the U.S.A. and other

countries.

SQTP is a service mark of Microchip T echnology Incorporated

in the U.S.A.

All other trademarks mentioned herein are property of their

respective companies.

Printed on recycled paper.

Note the following details of the code protection feature on Microchip devices:

• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the

intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our

knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data

Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrity of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not

mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our

products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts

allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received ISO/TS-16949:200 2 certif ication for its worldwide

headquarters, design and wafer fabrication facilities in Chandler and

Tempe, Arizona; Gresham, Oregon and design centers in Calif ornia

and India. The Company’s quality system processes and procedures

are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping

devices, Serial EEPROMs, microper ipher als, nonvol ati le memo ry and

analog product s. In addition, Microchip ’s quality system for th e design

and manufacture of development systems is ISO 9001:2000 certified.

MCP3421 SOT23-6 EVALUATION

BOARD USER’S GUIDE

Table of Contents

Preface ...........................................................................................................................1

Introduction............................................................................................................1

Document Layout..................................................................................................1

Conventions Used in this Guide............................................................................2

Recommended Reading ........................................................................................3

The Microchip Web Site........................................................................................3

Customer Support.................................................................................................3

Document Revision History...................................................................................4

Chapter 1. Quick Start Instructions

1.1 Introduction .....................................................................................................5

1.2 Description of the MCP3421 SOT23-6 Evaluation Board ..............................5

1.3 Getting Started with PICkit Serial Analyzer ....................................................7

Appendix A. Schematic and Layouts

A.1 Introduction ..................................................................................................23

A.2 Board – Schematic .......................................................................................24

A.3 Board – Top Layer .......................................................................................25

A.4 Board – Top Metal Layer .............................................................................26

A.5 Board – Bottom Metal Layer ........................................................................27

Appendix B. Bill Of Materials (BOM)

Worldwide Sales and Service ....................................................................................30

MCP3421 SOT23-6 Evaluation Board User’s Guide

NOTES:

MCP3421 SOT23-6 EVALUATION

BOARD USER’S GUIDE

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the

MCP3421 SOT23-6 Evaluation Board. Items discussed in this chapter include:

• Document Layout

• Conventions Used in this Guide

• Recommended Reading

• The Microchip Web Site

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document de scr ib es ho w to us e th e M CP3421 SOT2 3- 6 Eva lua tio n Boa rd as a

development tool to emulate and debug firmware on a t arget board. The manual layout

is as follows:

•Chapter 1. “Quick St art Instructions ” – this chapter provides an over view of the

MCP3421 SOT23-6 Evaluation Board and instructions on how to ob tain the ADC

conversion results using the PICKit Serial Analyzer.

•Appendix A. “Schematic and Layout s” – shows the schematic and layout

diagrams for the MC P3 42 1 SOT 2 3- 6 Eva lua tio n Boar d.

•Appendix B. “Bill Of Materials (BOM)” – lists the parts used to build the

MCP3421 SOT23-6 Evaluation Board.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip .com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the

document.

For the most up-to-date information on development tools, see the MPLAB® IDE on-line help.

Select the Help menu, and then Topics to open a list of available on-line help files.

MCP3421 SOT23-6 Evaluation Board User’s Guide

CONVENTIONS USED IN THIS GUIDE

This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS

Description Represents Examples

Arial font:

Italic characters Referenced books MPLAB® IDE User’s Guide

Emphasized text ...is the only compiler...

Initial caps A window the Output window

A dialog the Settings dialog

A menu selection select Enable Programmer

Quotes A field name in a window or

dialog “Save project before build”

Underlined, italic text with

right angle bracket A menu path File>Save

Bold characters A dialog button Click OK

A tab Click the Power tab

N‘Rnnnn A number in verilog format,

where N is the total number of

digits, R is the radix and n is a

digit.

4‘b0010, 2‘hF1

Text in angle brackets < > A key on the keyboard Press <Enter>, <F1>

Courier New font:

Plain Courier New Sample source code #define START

Filenames autoexec.bat

File paths c:\mcc18\h

Keywords _asm, _endasm, static

Command-li n e op ti o ns -Opa+, -Opa-

Bit values 0, 1

Constants 0xFF, ‘A’

Italic Courier New A variable argument file.o, where file can be

any valid filena me

Square brackets [ ] Optional arguments mcc18 [options] file

[options]

Curly brackets and pipe

character: { | } Choice of mutually exclusive

arguments; an OR selection errorlevel {0|1}

Ellipses... Replaces repeated text var_name [,

var_name...]

Represents code supplied by

user void main (void)

{ ...

}

Preface

RECOMMENDED READING

This user's guide describes how to use the MCP3421 SOT23-6 Evaluation Board with

the PICkit Serial Analyzer. The following Microchip documents are available and rec-

ommended as supplemental reference resour ces.

PICkit™ Serial Analyzer User’s Guide, DS51647

Consult this document for instructions on how to use the PICkit Serial Analyzer hardware

and software.

MCP3421 Data Sheet, “18-Bit Analog-to-Digital Converter with I2C Interface and

On-Board Reference” , DS22003

This data sheet provides detailed information regarding the MCP3421 product.

THE MICROCHIP WEB SITE

Microchip provides online support via our web site at www.microchip.com. This web

site is used as a means to make files and information easily available to customers.

Accessible by using your favorite Internet browser, the web site contains the following

information:

•Product Support – Da ta sheets and errata, application notes and sample

programs, design resources, user’s guides and hardware support documents,

latest software releases and archived software

•General Technical Support – Frequently Asked Questions (FAQs), technical

support reque s ts, online dis cus sio n groups, Microchip consultant program

member listing

•Business of Microchip – Product selector and ordering guides, latest Microchip

press releases, listing of seminars and events, listings of Microchip sales offices,

distributors and factory repr esentatives

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:

• Distributor or Representative

• Local Sales Of fice

• Field Application Engineer (FAE)

• Technical Support

Customers should conta ct their distributor, represent ative or field applica tion engine er

(FAE) for support. Local sales offices are also availa ble to help custo mers. A listing of

sales offices and locations is included in the back of this document.

Technical support is available through the web site at: http://support.microchip.com

MCP3421 SOT23-6 Evaluation Board User’s Guide

DOCUMENT REVISION HISTORY

Revision A (January 2009)

• Initial Release of this Document.

MCP3421 SOT23-6 EVALUATION

BOARD USER’S GUIDE

Chapter 1. Quick Start Instructions

1.1 INTRODUCTION

The following sections provide an overview of the MCP3421 SOT23-6 Evaluation

Board and demonstrate how to use it with the PICkit™ Serial Analyzer

(P/N: DV164122).

The following topics are covered:

• Description of the MCP3421 SOT23-6 Evaluation Board

• Using MCP3421 SOT23-6 Evaluation Board with the PICkit Serial Analyzer to

evaluate the MCP3421 device

1.2 DESCRIPTION OF THE MCP3421 SOT23-6 EVALUATION BOARD

The MCP3421 SOT23-6 Evaluation Board (P/N MCP3421EV) contains a MCP3421

18-bit Delta-Sigma Analog-to-Digital Converter (ADC). The MCP3421 is an 18-bit

single channel ADC device with various options. The MCP342 1 SOT23-6 Evaluation

Board has anal og inpu t connection p ads an d VDD, SDA, an d SCL test p ads. The user

can connect any sensor input signal to this evaluation board and test the ADC

conversion results. The PICkit Serial Analyzer’s PC graphic user interface (GUI)

provides the user’s interface for writing con figuration register bits of the MCP3421 an d

displays the ADC conversion values. The PICkit Serial Analyzer links between the GUI

and the MCP3421 SOT23-6 Evaluation Board, and provides the I2C communication

PC to the MCP3421 SOT23-6 Evaluation Board. The user also can use this MCP3421

SOT23-6 Evaluation Board without the PICkit Serial Analyzer by providing the I2C

communication signal to the SDA and SCL test pads on the board.

This evaluation board has the following interface:

• PICkit Serial Analyzer (P/N: DV164122) for writing configuration register bits and

reading the conve r sion da ta.

The user can monitor the I2C communications by connecting an oscilloscope to the

SDA and SCL test pads. Refer to Appendix A. “Schematic and Layouts”.

1.2.1 I2C Address Bits

The I2C device code and address bits of the MCP3421 device on this board are

“1101000”. These bits are programmed at the factory during production.

Note: The user can use this board withou t the PICkit Serial Analyzer as long as

the VDD, SCL, and SDA are provided to the board. This evaluation board

does not include MCU.

MCP3421 SOT23-6 Evaluation Board User’s Guide

FIGURE 1-1: Front and Back Views of the MCP3421 SOT23-6 Evaluation

Board.

Quick Start Instructions

1.3 GETTING STARTED WITH PICKIT SERIAL ANALYZER

Figure 1-1 shows the MCP3421 SOT23-6 Eva luation Board and Figure 1-2 shows the

Evaluation Board and PICkit Serial Analyzer connection.

The following steps describe how to use them together:

1. Connect the MCP3421 SOT23-6 Evaluation Board’s J1 pin socket to the PICkit

Serial Analyzer as shown in Figure 1-2.

2. Connect the oscilloscope probes to SCL and SDA test pins (optional).

3. VDD selection: You can use the VDD from the PICkit Serial Analyzer or use your

own extern al V DD. You can select the VDD path using the JP1 connector:

(a) Connect JP1, if using VDD from PICkit Serial Analyzer,

(b) Disconnect JP1 and apply VDD at VDD pin, if you are using external VDD.

4. Connect V DD, if external VDD is used.

5. LED D1 turns on when VDD is applied.

6. Connecting analog input s: If you need to measure single-ended input, connect

the unused pin (example, VIN-) to VSS.

7. Use the PICkit Serial Analyzer PC GUI to send I2C write and read commands.

See Section 1.3.2.1 “Creating a Script File for Configuration Byte Writing”.

8. Execute the PICkit Serial Analyzer Script file and obtain the ADC conversion

results. The conversion results appear on the PICkit Serial Analyzer PC GUI. Y ou

can also observe the conversion results using the oscilloscope.

Note: If you are using external VDD, connect the external VDD at VDD pad).

Note: Do not connect VDD if you are using VDD from the PICkit Serial Analyzer.

The PICkit Serial Analyzer provides the VDD automatically if it is connected

to PC.

Note: If the VDD is provided from the PICkit Serial Analyzer , then the LED may not

be turned on until you execute a command. See Section 1 .3.2.1 “Creating

a Script File for Configuration Byte Writing” for executing the I2C

command.

CAUTION

The analog input pin has ESD diodes. Certain input con ditions can damage the

device. Please pay attention to the following conditions:

(a) Do not apply input gr ea te r th an the inpu t ra ng e sp ec ifie d by th e MC P34 2 1

data sheet.

(b) Apply input signal after VDD is powered-up.

MCP3421 SOT23-6 Evaluation Board User’s Guide

FIGURE 1-2: MCP3421 SOT23-6 Evaluation Board with the PICkit Serial Analyzer.

PICkit Serial Analyzer

MCP3421 Evaluation Board

USB Cabl e

Connected between the

and Personal Computer

PICkit Serial Analyzer

Personal Computer

Sensor Input

Connectors

Quick Start Instructions

1.3.1 PICkit Serial Analyzer PC Software Set-Up for the MCP3421

SOT23-6 Evaluation Board

The following steps describe how to set up and use the PICkit Serial Analyzer PC

Graphic User Interface ( GUI) to write the configuration bits of the MCP3421 on the

Evaluation Board and read the ADC conversion results.

1. Install the PICkit Serial Analyzer software onto your personal computer (PC) .

2. Connect the USB cable between the PICkit Serial Analyzer and your PC.

3. Run the PICkit Serial PC Software. The following graphic user interface (GUI) will

appear. Click the Next button and follow the instructions.

FIGURE 1-3: PICkit Serial Analyzer Configuration Wizard Welcome Window.

4. Select the I2C Master option as communication mode, and click th e Next button.

FIGURE 1-4: Step 1 - Communication Mode Selection.

MCP3421 SOT23-6 Evaluation Board User’s Guide

5. Select 100 kHz or 400 kHz. Either one will be fine. Click the Next button.

FIGURE 1-5: Step 2 - I2C Communication Speed Window.

6. Select No on Enable Pull-ups, and click the Next button.

FIGURE 1-6: Step 3 - Device Pullups Window.

Note: The MCP3421 device support s the I2C bus data rate up to 3.4 MHz, but the

current version of the PICkit Serial Analyzer support s the I2C bus data rate

up to 400 kHz only.

Note: The MCP3421 SOT23-6 Evaluation Board has its own pull-up resistors,

therefore, you don’t need additional pull-up resistors from the PICkit Serial

Analyzer.

Quick Start Instructions

7. Select the VDD voltage of the MCP3421 SOT23-6 Evaluation Board and click the

Next button.

Case 1: When you use VDD from the PICkit Serial Analyzer:

If you choose PICkit Serial will power my device and 5 Volt as shown below,

the MCP3421 SOT23-6 Evaluation Board is powered by the 5V DC from the

PICkit™ Serial Analyzer through the JP1 jumper . In this case, make sure that the

JP1 jumper on the MCP3421 SOT23-6 Evaluation Board is connected.

Case 2: When you use your own VDD:

You can also provide your own VDD voltage by applying a VDD voltage at the VDD

test point on the boar d. In this case, make sure the JP1 jumper is disconn ecte d.

FIGURE 1-7: Step 4 - Voltage Source Selection Window.

MCP3421 SOT23-6 Evaluation Board User’s Guide

8. Click the OK button. You have made all of the PICkit Serial Analyzer configura-

tion set-ups. You are now ready to program the MCP3421 SOT23-6 Evaluation

Board using the PICkit Serial Analyzer.

FIGURE 1-8: Configuration Wizard - Finishing Step.

Quick Start Instructions

1.3.2 Creating Script Files

In order to make a communication between the PICkit Serial Analyzer and the

MCP3421 SOT23-6 Evaluation Board, a script file is needed. The following procedure

shows how to create script files and how to use them.

•Select Communication -----> Script -- -> Script Builder

FIGURE 1-9: Creating a Script File with Script Builde r.

MCP3421 SOT23-6 Evaluation Board User’s Guide

1.3.2.1 CREATING A SCRIPT FILE FOR CONFIGURATION BYTE WRITING

1. Click on WriteBlockAddrA8 in “Example I2C Scripts” column.

• This will result in filling in the spaces under the Script Detail column. Now you

can modify the Script Detail column parameters by clicking with the right mouse

button.

Modifying the Script Details parameters:

1. Under the Script Detail box, select the item in the parameter box.

2. Right click the mouse button and an optio n box appears to the right of your

selection, displaying the options that are available for the parameter selected.

3. Select the desired options (dele te or insert the parameter box).

4. Keep the parameters in the same order as shown below.

FIGURE 1-10: Modifying Parameters in the Script Builder Window.

1. To change value:

Click this box and

type a new value.

2. To delete or insert box:

Choose the box and right

3. Make sure the listed

are in the exact order

parameters in “Script Detail”

as shown here.

.click the mouse button for

options available.

Quick Start Instructions

5. Change the parameter value.

I2CSTART

I2CWRTBYT

I2CSTOP

Script Detail

------> This mean s th er e ar e two byte s to send

------> 1st Write Byte: Address byte with W/R bit = 1101-0000

------> 2nd Write Byte: 1001-1100

Note: All 6 parameters above must be listed in the same order as shown here.

The para meter above with * are not modifiable. Address bits

(A2, A1, A0) = (0,0,0) for this evaluation board. See the MCP3421 Data

Sheet for more information on address bit selection.

MCP3421 SOT23-6 Evaluation Board User’s Guide

FIGURE 1-11: Script File Example for the I2C Write Command.

2 Bytes to send

Address Byte

Configuration Byte

(9C)

Note that the “9C” in the configuration byte selects the following options:

- Conversion Mode: Contin u ou s Con ve rs i on

- Bit Resolution: 18 bits

- Gain Selection: 1x

Quick Start Instructions

1.3.2.2 SAVING THE SCRIPT FILE AND PROGRAMMING THE

CONFIGURATION REGISTER

1. Change the 2nd and 3rd data bytes you want in the Script Detail.

2. Type in any script name (i.e., MCP3421_Write) in the space below the Script

Name menu.

3. Click the Save Script button.

4. Click the Execute Script button.

5. You can also see the SCL and SDA waveforms using the oscilloscope.

FIGURE 1-12: I2C Write Command Waveforms for the MCP3421.

Note: At this point, the PICkit Serial transmits the I2C W rite Command to the

MCP3421 device. The saved file name will appear in Users I2C Scripts

column and can be re-used any time by selecting the file name.

Note: When you click on the “Execute Script” menu, the “Busy” LED on the PICkit

Serial Analyzer will momentarily turn on and then turn off. If the LED

remains ON, a communications problem has occurred. Remove the PICkit

Serial Analyzer from your computer and re-check the parameter values

including the order of parameters under the “Script Detail” column. Try

again until the “Busy” LED goes OFF immediately af ter executing the write

command.

Write Command with Address bits Configuration Bits

Zoom-in

MCP3421 SOT23-6 Evaluation Board User’s Guide

1.3.3 Reading the Conversion Dat a using the PICkit™ Seria l Analyzer

You can read back the conversion data by following the next steps.

1.3.3.1 CREATING A SCRIPT FILE TO READ THE CONVERSION DATA

1. Click on ReadAddrA8 in “Example I2C Scripts” column.

• This will result in filling in the spaces under the Script Detail column. Now you

can modify the p arameter boxes (delete o r insert) in the Script Det ail column with

options. The list of options will appear if you click the right mouse button at the

parameter box. You can delete the parameter box or add a new one.

• Make sure you have the “Script Detail” parameters are listed in order as

follows:

I2CSTART

I2CWRTBYT

I2CRDBYTNLB

I2CSTOP

Script Detail

------> This means there is one byte for addres s

------> Address byte with W/R bit = 1101-0001

------> 5 bytes to read

Note: All 7 parameters above must be listed in the same order as shown here.

The parameters above with * are not modifiable. Address bits

(A2, A1, A0) = (0,0,0) for the MCP3421 in this evaluation board. See the

MCP3421 Data Sheet for more information on address bit selection.

Quick Start Instructions

FIGURE 1-13: Script File Sample to Read Conversion Data.

2. Type in any script name (i.e., MCP3421_Read) in the space below th e Script

Name menu.

3. Click Save Script butt on .

4. Click Execute Script button.

5. You can also see the SCL and SDA waveforms using the oscilloscope.

Requesting

Address Byte

5 Bytes

Note: At this point, the PICkit™ Serial transmits the I2C Read Command to the

MCP3421 device. The saved file name will appear in Users I2C Scripts

column and can be re-used any time by selecting the file name.

Note: When you click on the “Execute Script” menu, the “Busy” LED on the PICkit

Serial Analyzer will momentarily turn on and then turn off. If the LED

remains ON, a communications problem has occurred. Remove the PICkit

Serial Analyzer from your computer and re-check the parameter values

including the order of parameters under the “Script Detail” column. Try

again until the “Busy” LED goes OFF immediatel y after executing the read

command.

MCP3421 SOT23-6 Evaluation Board User’s Guide

FIGURE 1-14: Reading Conversion Re sult s: Note th at the single end ed Input = 1.030 7V is applied a t

Ch.1. The reading indicates the measured value is 1.0307V. See Figure 1-15 for waveforms.

5th Byte: Repeated Byte for Configuration byte

4th byte: Configuration Byte (note that RDYbit is “0”)

3rd byte: Data Byte

2nd byte: Data Byte

1st byte: Data Byte

Output code: 101AD in hex (= 65965 in decimal)

Output Voltage: 65865 x 15.625 mV (LSB) = 1.0307 V with PGA = 1

Results:

(note that RDY bit returned to “1” after 4th byte)

Note:

* 1 LSB with 18 bit resolution optio n: 15.625 µV

Reading Conversion

Data

Requesting

5 Bytes

PGA

Quick Start Instructions

FIGURE 1-15: Read Command and Data on I2C bus. Note the RDY bit in 4th byte is “0”. This means

the conversion data just rea d is the latest conversi on data. Af ter the RDY bit is read out at the 4th byte, the

RDY bit becomes “1” in the 5th byte (repe ated byte). This means the device is no w in the process of a new

conversion an d th e late st con ver sion result is not ready yet.

Zoom-in

Data Bytes = 0101AD (hex)

Zoom-in

Configuration Byte and Repeated Configuration Byte

(a) Read command and outputs. The 3 data bytes are zoomed in for better clarity.

(b) Read command and outputs. The last two data bytes are zoomed in for better clarity.

4th Byte 5th Byte

RDY bit RDY bit

MCP3421 SOT23-6 Evaluation Board User’s Guide

NOTES:

MCP3421 SOT23-6 EVALUATION

BOARD USER’S GUIDE

Appendix A. Schematic and Layouts

A.1 INTRODUCTION

This appendix contains the following schematics and layouts for the MCP3421

SOT23-6 Evaluation Board:

• Board – Schematic

• Board – Top Layer

• Board – Top Metal Layer

• Board – Bottom Layer

MCP3421 SOT23-6 Evaluation Board User’s Guide

A.2 BOARD – SCHEMATIC

Schematic and Layouts

A.3 BOARD – TOP LAYER

MCP3421 SOT23-6 Evaluation Board User’s Guide

A.4 BOARD – TOP METAL LAYER

Schematic and Layouts

A.5 BOARD – BOTTOM METAL LAYER

MCP3421 SOT23-6 Evaluation Board User’s Guide

NOTES:

MCP3421 SOT23-6 EVALUATION

BOARD USER’S GUIDE

Appendix B. Bill Of Materials (BOM)

TABLE B-1: BILL OF MATERIALS

Qty Reference Description Manufacturer Part Number

1 C1 CAP .1UF 25V CERAMIC X7R

0805 Panasonic® - ECG ECJ-2VB1E104K

1 C2 CAP CERAMIC 10UF 6.3V X5R

0805 Panasonic - ECG ECJ-2FB0J106K

1 D1 LED RED ORANGE CLEAR 0805

SMD LITE-ON INC LTST-C170EKT

1 J1 CONN HEADER 6POS .100 R/A

TIN Molex/Waldom® Electronics

Corp 22-05-2061

1 PCB RoHS Compliant Bare PCB,

MCP3421EV —104-00124

2 R1,R3 RES 4.99K OHM 1/8W 1% 0805

SMD Panasonic - ECG ERJ-6ENF4991V

2 R2,R4 DO NOT POPULATE — —

1 R5 RES 470 OHM 1/8W 5% 0805 SMD Panasonic - ECG ERJ-6GEYJ471V

1 U1 18-Bit Analog-to-Digital Converter

with I2C Interface and On-Board

Reference

Microchip Technology Inc. MCP3421A0T-E/OT

7 VDD Vin+ Vin -

GND SCL SDA

VDD

TEST POINT PC COMPACT SMT Keystone Electronics®5016

Note: The components listed in this Bill of Materials are representative of the PCB assembly. The

released BOM used in manufacturing uses all RoHS-compliant components.

AMERICAS

Corporate Office

2355 West Chandler Blvd.

Chandler, AZ 85224-6199

Tel: 480-792-7200

Fax: 480-792-7277

Technical Support:

http://support.microchip.com

Web Address:

www.microchip.com

Atlanta

Duluth, GA

Tel: 678-957-9614

Fax: 678-957-1455

Boston

Westborough, MA

Tel: 774-760-0087

Fax: 774-760-0088

Chicago

Itasca, IL

Tel: 630-285-0071

Fax: 630-285-0075

Dallas

Addison, TX

Tel: 972-818-7423

Fax: 972-818-2924

Detroit

Farmington Hills, MI

Tel: 248-538-2250

Fax: 248-538-2260

Kokomo

Kokomo, IN

Tel: 765-864-8360

Fax: 765-864-8387

Los Angeles

Mission Viejo, CA

Tel: 949-462-9523

Fax: 949-462-9608

Santa Clara

Santa Clara, CA

Tel: 408-961-6444

Fax: 408-961-6445

Toronto

Mississauga, Ontario,

Canada

Tel: 905-673-0699

Fax: 905-673-6509

ASIA/PACIFIC

Asia Pacific Office

Suites 3707-14, 37th Floor

Tower 6, The Gateway

Harbour City, Kowloon

Hong Kong

Tel: 852-2401-1200

Fax: 852-2401-3431

Australia - Sydney

Tel: 61-2-9868-6733

Fax: 61-2-9868-6755

China - Beijing

Tel: 86-10-8528-2100

Fax: 86-10-8528-2104

China - Chengdu

Tel: 86-28-8665-5511

Fax: 86-28-8665-7889

China - Hong Kong SAR

Tel: 852-2401-1200

Fax: 852-2401-3431

China - Nanjing

Tel: 86-25-8473-2460

Fax: 86-25-8473-2470

China - Qingdao

Tel: 86-532-8502-7355

Fax: 86-532-8502-7205

China - Shanghai

Tel: 86-21-5407-5533

Fax: 86-21-5407-5066

China - Shenyang

Tel: 86-24-2334-2829

Fax: 86-24-2334-2393

China - Shenzhen

Tel: 86-755-8203-2660

Fax: 86-755-8203-1760

China - Wuhan

Tel: 86-27-5980-5300

Fax: 86-27-5980-5118

China - Xiamen

Tel: 86-592-2388138

Fax: 86-592-2388130

China - Xian

Tel: 86-29-8833-7252

Fax: 86-29-8833-7256

China - Zhuhai

Tel: 86-756-3210040

Fax: 86-756-3210049

ASIA/PACIFIC

India - Bangalore

Tel: 91-80-3090-4444

Fax: 91-80-3090-4080

India - New Delhi

Tel: 91-11-4160-8631

Fax: 91-11-4160-8632

India - Pune

Tel: 91-20-2566-1512

Fax: 91-20-2566-1513

Japan - Yokohama

Tel: 81-45-471- 6166

Fax: 81-45-471-6122

Korea - Daegu

Tel: 82-53-744-4301

Fax: 82-53-744-4302

Korea - Seoul

Tel: 82-2-554-7200

Fax: 82-2-558-5932 or

82-2-558-5934

Malaysia - Kuala Lumpur

Tel: 60-3-6201-9857

Fax: 60-3-6201-9859

Malaysia - Penang

Tel: 60-4-227-8870

Fax: 60-4-227-4068

Philippines - Manila

Tel: 63-2-634-9065

Fax: 63-2-634-9069

Singapore

Tel: 65-6334-8870

Fax: 65-6334-8850

Taiwan - Hsin Chu

Tel: 886-3-572-9526

Fax: 886-3-572-6459

Taiwan - Kaohsiung

Tel: 886-7-536-4818

Fax: 886-7-536-4803

Taiwan - Taipei

Tel: 886-2-2500-6610

Fax: 886-2-2508-0102

Thailand - Bangkok

Tel: 66-2-694-1351

Fax: 66-2-694-1350

EUROPE

Austria - Wels

Tel: 43-7242-2244-39

Fax: 43-7242-2244-393

Denmark - Copenhagen

Tel: 45-4450-2828

Fax: 45-4485-2829

France - Paris

Tel: 33-1-69-53-63-20

Fax: 33-1-69-30-90-79

Germany - Munich

Tel: 49-89-627-144-0

Fax: 49-89-627-144-44

Italy - Milan

Tel: 39-0331-742611

Fax: 39-0331-466781

Netherlands - Drunen

Tel: 31-416-690399

Fax: 31-416-690340

Spain - Madrid

Tel: 34-91-708-08-90

Fax: 34-91-708-08-91

UK - Wokingham

Tel: 44-118-921-5869

Fax: 44-118-921-5820

WORLDWIDE SALES AND SERVICE

01/16/09