Date Code 13,45 -0,1 15,4 3 -0,1 Ident-Nr. XXXXXXX ERNI 923705 5 0,5 EE Zone fur durchkontaktierte Locher o0.6 0.05 compliant zone for thru hole o 0.60.05 Ausrichtstreifen Alignment strip 2 2 21 x 2 = 42 4x2= 1 22 z a Ebene - Level 3 Ebene - Level 2 b c Ebene - Level 1 d 9.7 8.2 +0.2 +0.2 +0.2 4.5 0.3 e f 1 max. 11.2 3.7 0.3 1 max. 43,9 8 A P2 0,1 B C D E P1 F G U1 contact layout Bestuckungsplan - J 22 21 20 19 18 17 16 15 14 13 12 11 10 9 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S H S S S S S 8 S S S S S S S S S S 7 S S S S S 6 S S S S S 5 S S S S S 4 3 S S S S S S S S S S 2 1 S S S S S Bezugsebene Tiefe 13 0.3 S S S S S Datum plane depth z a K R3 b c L M N d R2 e P Q f R R1 S T 13 0.2 Lochbild fur Leiterplatte Board hole pattern (Bestuckungsseite) (Component mounting side) 21 x 2 = 0.1 alle Locher all holes 5.3 0.1 14.5 0.2 6.8 16 0.2 8.3 0.1 0.1 ( 42 ) 1) o 0,6 2 1) 0,05 Durchmesser des metallisierten Loches o 0,6 0,05 Diameter o 0,7 0,02 Bohrungsdurchmesser of finished plated-through hole o 0,7 0,02 Diameter des Loches of drilled hole z a b Schichtaufbau im metallisierten Loch siehe Zeichnung 114406 c Metal plating of plated-through hole see drawing 114406 d Fehlende Masse und Angaben nach IEC 61076-4-101 f Missing information and dimensions per IEC 61076-4-101 2 (8) e 22 4x2= 1 Information: R1 Level 2 Tolerances siehe Bestuckungsplan / see contact layout Consider protection memo from DIN 34 Anforderungsstufe 2 / All Dimensions in mm class 2 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date Designation ERmet Messerleiste B 22 ERmet Male Wide Type B 22 www.ERNI.com Index 2:1 Scale H:00042572.SZN 923705 ERMB22 I