MLG0603S24NJT000 - TDK - Datasheet.Directory

INDUCTORS

MLG0603S 0603 [0201 inch]*

MLG1005S 1005 [0402 inch]

MLG1608 1608 [0603 inch]

* Dimensions Code JIS[EIA]

March 2014

Inductors for High Frequency

Multilayer Ceramic

MLG series

(2/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

REMINDERS FOR USING THESE PRODUCTS

Before using these products, be sure to request the delivery specifications.

SAFETY REMINDERS

Please pay sufficient attention to the warnings for safe designing when using these products.

The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH

or less).

If the storage period elapses, the soldering of the terminal electrodes may deteriorate.

Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).

Before soldering, be sure to preheat components.

The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature

does not exceed 150°C.

Soldering corrections after mounting should be within the range of the conditions determined in the specifications.

If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.

When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to

the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.

Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal

design.

Carefully lay out the coil for the circuit board design of the non-magnetic shield type.

A malfunction may occur due to magnetic interference.

Use a wrist band to discharge static electricity in your body through the grounding wire.

Do not expose the products to magnets or magnetic fields.

Do not use for a purpose outside of the contents regulated in the delivery specifications.

The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications

equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement

equipment, industrial robots) under a normal operation and use condition.

The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or

quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to

society, person or property.

If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions

set forth in the each catalog, please contact us.

(1) Aerospace/Aviation equipment

(2) Transportation equipment (cars, electric trains, ships, etc.)

(3) Medical equipment

(4) Power-generation control equipment

(5) Atomic energy-related equipment

(6) Seabed equipment

(7) Transportation control equipment

(8) Public information-processing equipment

(9) Military equipment

(10) Electric heating apparatus, burning equipment

(11) Disaster prevention/crime prevention equipment

(12) Safety equipment

(13) Other applications that are not considered general-purpose

applications

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing

protection circuit/device or providing backup circuits in your equipment.

REMINDERS

(3/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

Inductors for High Frequency Circuits

Multilayer Ceramic

FEATURES

Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for High-

frequency.

APPLICATION

Smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners

and other high frequency circuits for the mobile communication industry

PART NUMBER CONSTRUCTION

OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT

The Storage temperature range is for after the circuit board is mounted.

Product compatible with RoHS directive

Halogen-free

Compatible with lead-free solders

Overview of the MLG Series

MLG 0603 S 0N3 S T 000

Series name L×W×H Dimensions Product internal

code

Inductance Inductance

tolerance Packaging style Internal code

(mm) (nH)

0603 0.6×0.3×0.3 B 1N1 1.1 B ±0.1nH T Taping 000

1005 1.0×0.5×0.5 S 11N 11 C ±0.2nH

1608 1.6×0.8×0.8 R10 100 S ±0.3nH

1R0 1000 D ±0.5nH

H±3%

J±5%

Type

Temperature range

Package quantity Individual weight

Operating

temperature

Storage

temperature

（°C）（°C）(pieces/reel) （mg）

MLG0603S –55 to +125 –55 to +125 15000 0.2

MLG1005S –55 to +125 –55 to +125 10000 1

MLG1608 –55 to +125 –55 to +125 4000 4

RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/

Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.

(4/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

Overview of the MLG Series

RECOMMENDED REFLOW PROFILE

Preheating Soldering Peak

Temp. Time Temp. Time Temp. Time

T1 T2 t1 T3 t2 T4 t3

150°C 180°C 60 to 120s 230°C 30 to 60s 250 to 260°C 10s max.

Natural

cooling

Preheating

Soldering

T3 T3

t: Time

Peak

T: Temperature

(5/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries

MLG0603S Type

SHAPE & DIMENSIONS

RECOMMENDED LAND PATTERN

0.6±0.03

0.15±0.05 0.15±0.05

0.30±0.03 0.30±0.03

Dimensions in mm

0.3

0.3 0.250.25 Dimensions in mm

(6/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG0603S Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

min.

L, Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

0.3 ±0.1nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N3BT000

0.3 ±0.2nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N3CT000

0.4 ±0.1nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N4BT000

0.4 ±0.2nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N4CT000

0.5 ±0.1nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N5BT000

0.5 ±0.2nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N5CT000

0.6 ±0.1nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N6BT000

0.6 ±0.2nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N6CT000

0.7 ±0.1nH —100 10.0 16.3 0.1 0.02 600 MLG0603S0N7BT000

0.7 ±0.2nH —100 10.0 16.3 0.1 0.02 600 MLG0603S0N7CT000

0.8 ±0.1nH —100 10.0 16.1 0.1 0.03 600 MLG0603S0N8BT000

0.8 ±0.2nH —100 10.0 16.1 0.1 0.03 600 MLG0603S0N8CT000

0.9 ±0.1nH —100 10.0 13.8 0.1 0.03 600 MLG0603S0N9BT000

0.9 ±0.2nH —100 10.0 13.8 0.1 0.03 600 MLG0603S0N9CT000

1.0 ±0.1nH 4 100 10.0 14.4 0.1 0.04 600 MLG0603S1N0BT000

1.0 ±0.2nH 4100 10.0 14.4 0.1 0.04 600 MLG0603S1N0CT000

1.0 ±0.3nH 4 100 10.0 14.4 0.1 0.04 600 MLG0603S1N0ST000

1.1 ±0.1nH 4100 10.0 13.6 0.15 0.04 550 MLG0603S1N1BT000

1.1 ±0.2nH 4 100 10.0 13.6 0.15 0.04 550 MLG0603S1N1CT000

1.1 ±0.3nH 4100 10.0 13.6 0.15 0.04 550 MLG0603S1N1ST000

1.2 ±0.1nH 4 100 10.0 12.3 0.15 0.06 550 MLG0603S1N2BT000

1.2 ±0.2nH 4100 10.0 12.3 0.15 0.06 550 MLG0603S1N2CT000

1.2 ±0.3nH 4 100 10.0 12.3 0.15 0.06 550 MLG0603S1N2ST000

1.3 ±0.1nH 4100 9.0 11.4 0.15 0.07 550 MLG0603S1N3BT000

1.3 ±0.2nH 4 100 9.0 11.4 0.15 0.07 550 MLG0603S1N3CT000

1.3 ±0.3nH 4100 9.0 11.4 0.15 0.07 550 MLG0603S1N3ST000

1.5 ±0.1nH 4 100 9.0 10.4 0.15 0.07 550 MLG0603S1N5BT000

1.5 ±0.2nH 4100 9.0 10.4 0.15 0.07 550 MLG0603S1N5CT000

1.5 ±0.3nH 4 100 9.0 10.4 0.15 0.07 550 MLG0603S1N5ST000

1.6 ±0.1nH 4100 9.0 11.5 0.2 0.09 500 MLG0603S1N6BT000

1.6 ±0.2nH 4 100 9.0 11.5 0.2 0.09 500 MLG0603S1N6CT000

1.6 ±0.3nH 4100 9.0 11.5 0.2 0.09 500 MLG0603S1N6ST000

1.8 ±0.1nH 4 100 8.5 10.0 0.2 0.12 500 MLG0603S1N8BT000

1.8 ±0.2nH 4100 8.5 10.0 0.2 0.12 500 MLG0603S1N8CT000

1.8 ±0.3nH 4 100 8.5 10.0 0.2 0.12 500 MLG0603S1N8ST000

2.0 ±0.1nH 4100 8.2 9.8 0.25 0.14 400 MLG0603S2N0BT000

2.0 ±0.2nH 4 100 8.2 9.8 0.25 0.14 400 MLG0603S2N0CT000

2.0 ±0.3nH 4100 8.2 9.8 0.25 0.14 400 MLG0603S2N0ST000

2.2 ±0.1nH 4 100 8.0 8.9 0.25 0.14 400 MLG0603S2N2BT000

2.2 ±0.2nH 4100 8.0 8.9 0.25 0.14 400 MLG0603S2N2CT000

2.2 ±0.3nH 4 100 8.0 8.9 0.25 0.14 400 MLG0603S2N2ST000

2.4 ±0.1nH 4100 8.0 9.2 0.25 0.15 300 MLG0603S2N4BT000

2.4 ±0.2nH 4 100 8.0 9.2 0.25 0.15 300 MLG0603S2N4CT000

2.4 ±0.3nH 4100 8.0 9.2 0.25 0.15 300 MLG0603S2N4ST000

Measurement item Product No. Manufacturer

L, Q 4291B+16197A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(7/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG0603S Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

min.

L, Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

2.7 ±0.1nH 4 100 6.5 8.1 0.25 0.15 300 MLG0603S2N7BT000

2.7 ±0.2nH 4100 6.5 8.1 0.25 0.15 300 MLG0603S2N7CT000

2.7 ±0.3nH 4 100 6.5 8.1 0.25 0.15 300 MLG0603S2N7ST000

3.0 ±0.1nH 4100 6.2 7.8 0.3 0.20 300 MLG0603S3N0BT000

3.0 ±0.2nH 4 100 6.2 7.8 0.3 0.20 300 MLG0603S3N0CT000

3.0 ±0.3nH 4100 6.2 7.8 0.3 0.20 300 MLG0603S3N0ST000

3.3 ±0.1nH 4 100 5.8 7.0 0.35 0.23 300 MLG0603S3N3BT000

3.3 ±0.2nH 4100 5.8 7.0 0.35 0.23 300 MLG0603S3N3CT000

3.3 ±0.3nH 4 100 5.8 7.0 0.35 0.23 300 MLG0603S3N3ST000

3.6 ±0.1nH 4100 5.5 6.9 0.35 0.22 300 MLG0603S3N6BT000

3.6 ±0.2nH 4 100 5.5 6.9 0.35 0.22 300 MLG0603S3N6CT000

3.6 ±0.3nH 4100 5.5 6.9 0.35 0.22 300 MLG0603S3N6ST000

3.9 ±0.1nH 5 100 5.0 6.6 0.4 0.27 300 MLG0603S3N9BT000

3.9 ±0.2nH 5100 5.0 6.6 0.4 0.27 300 MLG0603S3N9CT000

3.9 ±0.3nH 5 100 5.0 6.6 0.4 0.27 300 MLG0603S3N9ST000

4.3 ±3% 5100 5.0 6.4 0.4 0.27 300 MLG0603S4N3HT000

4.3 ±0.3nH 5 100 5.0 6.4 0.4 0.27 300 MLG0603S4N3ST000

4.7 ±0.3nH 5100 4.5 5.4 0.45 0.28 300 MLG0603S4N7ST000

4.7 ±3% 5 100 4.5 5.4 0.45 0.28 300 MLG0603S4N7HT000

5.1 ±3% 5100 4.5 5.5 0.45 0.23 250 MLG0603S5N1HT000

5.1 ±0.3nH 5 100 4.5 5.5 0.45 0.23 250 MLG0603S5N1ST000

5.6 ±0.3nH 5100 4.2 5.3 0.5 0.31 250 MLG0603S5N6ST000

5.6 ±3% 5 100 4.2 5.3 0.5 0.31 250 MLG0603S5N6HT000

6.2 ±0.3nH 5100 4.2 5.1 0.55 0.32 250 MLG0603S6N2ST000

6.2 ±3% 5 100 4.2 5.1 0.55 0.32 250 MLG0603S6N2HT000

6.8 ±3% 5100 3.6 4.4 0.6 0.32 250 MLG0603S6N8HT000

6.8 ±5% 5 100 3.6 4.4 0.6 0.32 250 MLG0603S6N8JT000

7.5 ±3% 5100 4.2 5.3 0.7 0.43 200 MLG0603S7N5HT000

7.5 ±5% 5 100 4.2 5.3 0.7 0.43 200 MLG0603S7N5JT000

8.2 ±3% 5100 3.8 4.5 0.7 0.45 200 MLG0603S8N2HT000

8.2 ±5% 5 100 3.8 4.5 0.7 0.45 200 MLG0603S8N2JT000

9.1 ±3% 5100 3.4 4.9 0.8 0.51 200 MLG0603S9N1HT000

9.1 ±5% 5 100 3.4 4.9 0.8 0.51 200 MLG0603S9N1JT000

10 ±3% 5100 3.2 4.1 0.8 0.53 200 MLG0603S10NHT000

10 ±5% 5 100 3.2 4.1 0.8 0.53 200 MLG0603S10NJT000

11 ±3% 6100 3.0 3.7 0.8 0.53 200 MLG0603S11NHT000

11 ±5% 6 100 3.0 3.7 0.8 0.53 200 MLG0603S11NJT000

12 ±3% 6100 2.8 3.6 0.9 0.63 180 MLG0603S12NHT000

12 ±5% 6 100 2.8 3.6 0.9 0.63 180 MLG0603S12NJT000

13 ±3% 6100 2.7 3.4 0.9 0.60 180 MLG0603S13NHT000

13 ±5% 6 100 2.7 3.4 0.9 0.60 180 MLG0603S13NJT000

15 ±3% 6100 2.5 3.3 1.1 0.69 180 MLG0603S15NHT000

15 ±5% 6 100 2.5 3.3 1.1 0.69 180 MLG0603S15NJT000

16 ±3% 6100 2.3 3.0 1.1 0.70 180 MLG0603S16NHT000

16 ±5% 6 100 2.3 3.0 1.1 0.70 180 MLG0603S16NJT000

Measurement item Product No. Manufacturer

L, Q 4291B+16197A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(8/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG0603S Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

min.

L, Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

18 ±3% 6 100 2.2 2.8 1.2 0.78 150 MLG0603S18NHT000

18 ±5% 6100 2.2 2.8 1.2 0.78 150 MLG0603S18NJT000

20 ±3% 6 100 2.1 2.6 1.2 0.75 150 MLG0603S20NHT000

20 ±5% 6100 2.1 2.6 1.2 0.75 150 MLG0603S20NJT000

22 ±3% 6 100 2.0 2.5 1.2 0.88 150 MLG0603S22NHT000

22 ±5% 6100 2.0 2.5 1.2 0.88 150 MLG0603S22NJT000

24 ±3% 6 100 1.9 2.3 1.3 0.90 150 MLG0603S24NHT000

24 ±5% 6100 1.9 2.3 1.3 0.90 150 MLG0603S24NJT000

27 ±3% 6 100 1.8 2.2 1.5 1.00 100 MLG0603S27NHT000

27 ±5% 6100 1.8 2.2 1.5 1.00 100 MLG0603S27NJT000

30 ±3% 6 100 1.6 2.0 1.6 0.95 100 MLG0603S30NHT000

30 ±5% 6100 1.6 2.0 1.6 0.95 100 MLG0603S30NJT000

33 ±3% 6 100 1.6 2.0 1.8 1.20 100 MLG0603S33NHT000

33 ±5% 6100 1.6 2.0 1.8 1.20 100 MLG0603S33NJT000

36 ±3% 6 100 1.5 1.8 2.0 1.68 50 MLG0603S36NHT000

36 ±5% 6100 1.5 1.8 2.0 1.68 50 MLG0603S36NJT000

39 ±3% 6 100 1.4 1.6 2.0 1.40 50 MLG0603S39NHT000

39 ±5% 6100 1.4 1.6 2.0 1.40 50 MLG0603S39NJT000

43 ±3% 6 100 1.3 1.6 2.2 1.91 50 MLG0603S43NHT000

43 ±5% 6100 1.3 1.6 2.2 1.91 50 MLG0603S43NJT000

47 ±3% 6 100 1.3 1.5 2.2 1.48 50 MLG0603S47NHT000

47 ±5% 6100 1.3 1.5 2.2 1.48 50 MLG0603S47NJT000

51 ±3% 5 100 1.2 1.5 2.8 1.98 50 MLG0603S51NHT000

51 ±5% 5100 1.2 1.5 2.8 1.98 50 MLG0603S51NJT000

56 ±3% 5 100 1.2 1.4 3.2 2.11 50 MLG0603S56NHT000

56 ±5% 5100 1.2 1.4 3.2 2.11 50 MLG0603S56NJT000

62 ±3% 5 100 1.1 1.3 3.3 2.22 50 MLG0603S62NHT000

62 ±5% 5100 1.1 1.3 3.3 2.22 50 MLG0603S62NJT000

68 ±3% 5 100 1.05 1.24 3.5 2.40 50 MLG0603S68NHT000

68 ±5% 5100 1.05 1.24 3.5 2.40 50 MLG0603S68NJT000

75 ±3% 5 100 0.95 1.17 3.8 2.67 50 MLG0603S75NHT000

75 ±5% 5100 0.95 1.17 3.8 2.67 50 MLG0603S75NJT000

82 ±3% 5 100 0.90 1.08 4.0 2.80 50 MLG0603S82NHT000

82 ±5% 5100 0.90 1.08 4.0 2.80 50 MLG0603S82NJT000

91 ±3% 5 100 0.77 0.94 4.3 2.97 50 MLG0603S91NHT000

91 ±5% 5100 0.77 0.94 4.3 2.97 50 MLG0603S91NJT000

100 ±3% 5 100 0.77 0.94 4.5 3.13 50 MLG0603SR10HT000

100 ±5% 5100 0.77 0.94 4.5 3.13 50 MLG0603SR10JT000

110 ±3% 5 100 0.77 0.94 6.5 5.24 50 MLG0603SR11HT000

110 ±5% 5100 0.77 0.94 6.5 5.24 50 MLG0603SR11JT000

120 ±3% 5 100 0.70 0.88 7.0 5.53 50 MLG0603SR12HT000

120 ±5% 5100 0.70 0.88 7.0 5.53 50 MLG0603SR12JT000

130 ±3% 5 100 0.67 0.84 7.3 5.68 50 MLG0603SR13HT000

130 ±5% 5100 0.67 0.84 7.3 5.68 50 MLG0603SR13JT000

Measurement item Product No. Manufacturer

L, Q 4291B+16197A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(9/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG0603S Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

min.

L, Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

150 ±3% 5 100 0.64 0.77 8.0 6.24 50 MLG0603SR15HT000

150 ±5% 5100 0.64 0.77 8.0 6.24 50 MLG0603SR15JT000

160 ±3% 5 100 0.60 0.73 8.3 6.67 50 MLG0603SR16HT000

160 ±5% 5100 0.60 0.73 8.3 6.67 50 MLG0603SR16JT000

180 ±3% 5 100 0.56 0.68 8.5 6.99 50 MLG0603SR18HT000

180 ±5% 5100 0.56 0.68 8.5 6.99 50 MLG0603SR18JT000

Measurement item Product No. Manufacturer

L, Q 4291B+16197A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(10/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG0603S Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.*

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

0.3 0.3 0.3 0.3 0.3 14min. 18min. 29min. 32min. 35min. MLG0603S0N3CT000

0.4 0.4 0.4 0.4 0.4 14min. 18min. 29min. 32min. 35min. MLG0603S0N4BT000

0.4 0.4 0.4 0.4 0.4 14min. 18min. 29min. 32min. 35min. MLG0603S0N4CT000

0.5 0.5 0.5 0.5 0.5 14 18 29 32 35 MLG0603S0N5BT000

0.5 0.5 0.5 0.5 0.5 14 18 29 32 35 MLG0603S0N5CT000

0.6 0.6 0.5 0.5 0.5 16 20 33 34 39 MLG0603S0N6BT000

0.6 0.6 0.5 0.5 0.5 16 20 33 34 39 MLG0603S0N6CT000

0.7 0.6 0.6 0.6 0.6 16 21 33 35 39 MLG0603S0N7BT000

0.7 0.6 0.6 0.6 0.6 16 21 33 35 39 MLG0603S0N7CT000

0.7 0.7 0.7 0.7 0.7 15 20 32 34 38 MLG0603S0N8BT000

0.7 0.7 0.7 0.7 0.7 15 20 32 34 38 MLG0603S0N8CT000

0.8 0.8 0.8 0.8 0.8 15 19 30 32 35 MLG0603S0N9BT000

0.8 0.8 0.8 0.8 0.8 15 19 30 32 35 MLG0603S0N9CT000

0.9 0.9 0.9 0.9 0.9 14 18 29 30 34 MLG0603S1N0BT000

0.9 0.9 0.9 0.9 0.9 14 18 29 30 34 MLG0603S1N0CT000

0.9 0.9 0.9 0.9 0.9 14 18 29 30 34 MLG0603S1N0ST000

1.0 1.0 1.0 1.0 1.0 14 19 29 31 34 MLG0603S1N1BT000

1.0 1.0 1.0 1.0 1.0 14 19 29 31 34 MLG0603S1N1CT000

1.0 1.0 1.0 1.0 1.0 14 19 29 31 34 MLG0603S1N1ST000

1.1 1.1 1.1 1.1 1.1 14 18 29 30 34 MLG0603S1N2BT000

1.1 1.1 1.1 1.1 1.1 14 18 29 30 34 MLG0603S1N2CT000

1.1 1.1 1.1 1.1 1.1 14 18 29 30 34 MLG0603S1N2ST000

1.2 1.2 1.2 1.2 1.2 14 18 29 30 33 MLG0603S1N3BT000

1.2 1.2 1.2 1.2 1.2 14 18 29 30 33 MLG0603S1N3CT000

1.2 1.2 1.2 1.2 1.2 14 18 29 30 33 MLG0603S1N3ST000

1.4 1.4 1.4 1.4 1.4 15 19 29 30 34 MLG0603S1N5BT000

1.4 1.4 1.4 1.4 1.4 15 19 29 30 34 MLG0603S1N5CT000

1.4 1.4 1.4 1.4 1.4 15 19 29 30 34 MLG0603S1N5ST000

1.5 1.5 1.5 1.5 1.5 14 18 29 30 33 MLG0603S1N6BT000

1.5 1.5 1.5 1.5 1.5 14 18 29 30 33 MLG0603S1N6CT000

1.5 1.5 1.5 1.5 1.5 14 18 29 30 33 MLG0603S1N6ST000

1.7 1.7 1.7 1.7 1.7 15 19 29 30 33 MLG0603S1N8BT000

1.7 1.7 1.7 1.7 1.7 15 19 29 30 33 MLG0603S1N8CT000

1.7 1.7 1.7 1.7 1.7 15 19 29 30 33 MLG0603S1N8ST000

1.9 1.9 1.9 1.9 1.9 14 18 28 29 32 MLG0603S2N0BT000

1.9 1.9 1.9 1.9 1.9 14 18 28 29 32 MLG0603S2N0CT000

1.9 1.9 1.9 1.9 1.9 14 18 28 29 32 MLG0603S2N0ST000

2.1 2 2.1 2.1 2.1 14 18 27 28 31 MLG0603S2N2BT000

2.1 22.1 2.1 2.1 14 18 27 28 31 MLG0603S2N2CT000

2.1 2 2.1 2.1 2.1 14 18 27 28 31 MLG0603S2N2ST000

2.2 2.2 2.2 2.3 2.3 14 18 27 29 32 MLG0603S2N4BT000

2.2 2.2 2.2 2.3 2.3 14 18 27 29 32 MLG0603S2N4CT000

2.2 2.2 2.2 2.3 2.3 14 18 27 29 32 MLG0603S2N4ST000

2.5 2.5 2.6 2.6 2.7 15 19 28 29 31 MLG0603S2N7BT000

2.5 2.5 2.6 2.6 2.7 15 19 28 29 31 MLG0603S2N7CT000

2.5 2.5 2.6 2.6 2.7 15 19 28 29 31 MLG0603S2N7ST000

Product No. Manufacturer

4291B+16197A Agilent Technologies

(11/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG0603S Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.*

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

2.8 2.8 2.9 2.9 315 19 29 31 33 MLG0603S3N0BT000

2.8 2.8 2.9 2.9 3 15 19 29 31 33 MLG0603S3N0CT000

2.8 2.8 2.9 2.9 315 19 29 31 33 MLG0603S3N0ST000

3.1 3.1 3.2 3.3 3.4 15 19 28 29 31 MLG0603S3N3BT000

3.1 3.1 3.2 3.3 3.4 15 19 28 29 31 MLG0603S3N3CT000

3.1 3.1 3.2 3.3 3.4 15 19 28 29 31 MLG0603S3N3ST000

3.4 3.4 3.5 3.6 3.7 14 18 26 27 29 MLG0603S3N6BT000

3.4 3.4 3.5 3.6 3.7 14 18 26 27 29 MLG0603S3N6CT000

3.4 3.4 3.5 3.6 3.7 14 18 26 27 29 MLG0603S3N6ST000

3.7 3.7 3.8 3.9 4.1 15 19 29 29 32 MLG0603S3N9BT000

3.7 3.7 3.8 3.9 4.1 15 19 29 29 32 MLG0603S3N9CT000

3.7 3.7 3.8 3.9 4.1 15 19 29 29 32 MLG0603S3N9ST000

4.1 4.1 4.3 4.4 4.6 14 18 27 27 29 MLG0603S4N3HT000

4.1 4.1 4.3 4.4 4.6 14 18 27 27 29 MLG0603S4N3ST000

4.4 4.4 4.8 4.9 5.2 15 20 28 29 30 MLG0603S4N7ST000

4.4 4.4 4.8 4.9 5.2 15 20 28 29 30 MLG0603S4N7HT000

4.8 4.8 5.1 5.3 5.6 14 18 25 26 27 MLG0603S5N1HT000

4.8 4.8 5.1 5.3 5.6 14 18 25 26 27 MLG0603S5N1ST000

5.3 5.3 5.7 5.9 6.4 16 20 27 28 29 MLG0603S5N6ST000

5.3 5.3 5.7 5.9 6.4 16 20 27 28 29 MLG0603S5N6HT000

5.9 5.9 6.5 6.8 7.5 15 18 25 25 26 MLG0603S6N2ST000

5.9 5.9 6.5 6.8 7.5 15 18 25 25 26 MLG0603S6N2HT000

6.4 6.5 7.4 7.8 8.7 15 19 26 26 25 MLG0603S6N8HT000

6.4 6.5 7.4 7.8 8.7 15 19 26 26 25 MLG0603S6N8JT000

7.1 7.1 7.8 88.7 14 18 25 26 26 MLG0603S7N5HT000

7.1 7.1 7.8 8 8.7 14 18 25 26 26 MLG0603S7N5JT000

7.8 7.8 8.8 9.3 10.4 15 18 24 24 24 MLG0603S8N2HT000

7.8 7.8 8.8 9.3 10.4 15 18 24 24 24 MLG0603S8N2JT000

8.6 8.6 9.8 10.3 11.5 14 17 22 22 22 MLG0603S9N1HT000

8.6 8.6 9.8 10.3 11.5 14 17 22 22 22 MLG0603S9N1JT000

10 10 12 12 15 15 18 23 22 21 MLG0603S10NHT000

10 10 12 12 15 15 18 23 22 21 MLG0603S10NJT000

10 11 13 14 16 15 18 22 22 20 MLG0603S11NHT000

10 11 13 14 16 15 18 22 22 20 MLG0603S11NJT000

11 12 14 15 19 16 19 24 23 20 MLG0603S12NHT000

11 12 14 15 19 16 19 24 23 20 MLG0603S12NJT000

12 13 16 17 22 14 16 19 18 15 MLG0603S13NHT000

12 13 16 17 22 14 16 19 18 15 MLG0603S13NJT000

14 15 20 23 33 15 19 20 18 14 MLG0603S15NHT000

14 15 20 23 33 15 19 20 18 14 MLG0603S15NJT000

15 16 22 25 37 14 16 16 15 11 MLG0603S16NHT000

15 16 22 25 37 14 16 16 15 11 MLG0603S16NJT000

17 18 28 35 14 17 15 13 MLG0603S18NHT000

17 18 28 35 14 17 15 13 MLG0603S18NJT000

19 20 32 13 16 14 MLG0603S20NHT000

19 20 32 13 16 14 MLG0603S20NJT000

Product No. Manufacturer

4291B+16197A Agilent Technologies

(12/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG0603S Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.*

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

21 23 40 15 17 13 MLG0603S22NHT000

21 23 40 15 17 13 MLG0603S22NJT000

23 24 45 13 15 13 MLG0603S24NHT000

23 24 45 13 15 13 MLG0603S24NJT000

27 29 15 17 MLG0603S27NHT000

27 29 15 17 MLG0603S27NJT000

29 32 13 15 MLG0603S30NHT000

29 32 13 15 MLG0603S30NJT000

33 36 14 16 MLG0603S33NHT000

33 36 14 16 MLG0603S33NJT000

36 40 14 15 MLG0603S36NHT000

36 40 14 15 MLG0603S36NJT000

40 47 13 14 MLG0603S39NHT000

40 47 13 14 MLG0603S39NJT000

44 53 14 14 MLG0603S43NHT000

44 53 14 14 MLG0603S43NJT000

49 60 13 13 MLG0603S47NHT000

49 60 13 13 MLG0603S47NJT000

52 64 11 11 MLG0603S51NHT000

52 64 11 11 MLG0603S51NJT000

59 77 12 11 MLG0603S56NHT000

59 77 12 11 MLG0603S56NJT000

66 88 11 10 MLG0603S62NHT000

66 88 11 10 MLG0603S62NJT000

74 104 13 11 MLG0603S68NHT000

74 104 13 11 MLG0603S68NJT000

82 119 10 8MLG0603S75NHT000

82 119 10 8 MLG0603S75NJT000

96 161 12 8MLG0603S82NHT000

96 161 12 8 MLG0603S82NJT000

109 9MLG0603S91NHT000

109 9 MLG0603S91NJT000

129 11 MLG0603SR10HT000

129 11 MLG0603SR10JT000

134 10 MLG0603SR11HT000

134 10 MLG0603SR11JT000

156 9MLG0603SR12HT000

156 9 MLG0603SR12JT000

172 8MLG0603SR13HT000

172 8 MLG0603SR13JT000

223 7MLG0603SR15HT000

223 7 MLG0603SR15JT000

238 7MLG0603SR16HT000

238 7 MLG0603SR16JT000

318 6MLG0603SR18HT000

318 6 MLG0603SR18JT000

Product No. Manufacturer

4291B+16197A Agilent Technologies

(13/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG0603S Type

ELECTRICAL CHARACTERISTICS

L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)

○Measurement equipment

＊ Equivalent measurement equipment may be used.

10 100 1000 10000

1000

100

Frequency(MHz)

Inductance(nH)

R18 R15

R12

R10

82N

68N

56N

47N 39N

33N

27N

22N 18N

15N

12N

10N

8N2

6N8

5N6

4N7

3N9

3N3

2N7

2N2

1N8

1N5

1N2

1N0

Product No. Manufacturer

E4991A +16197A Agilent Technologies

(14/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG0603S Type

ELECTRICAL CHARACTERISTICS

Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)

○Measurement equipment

＊ Equivalent measurement equipment may be used.

10 100 1000 10000

Frequency(MHz)

㻌

R18

68N

56N

47N

39N

33N

27N

22N

18N

15N

12N

10N

8N2

6N8

5N6

4N7

3N9

2N7

1N8

1N5

1N2

1N0

2N2

3N3

R12

R10

82N

R15

Product No. Manufacturer

E4991A +16197A Agilent Technologies

(15/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries

MLG1005S Type

SHAPE & DIMENSIONS

RECOMMENDED LAND PATTERN

Dimensions in mm

1.00±0.05

0.25±0.10 0.25±0.10

0.50±0.05 0.50±0.05

Dimensions in mm

0.5

0.5 0.4 0.5

(16/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1005S Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

 Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

min.

L, Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.*

(nH) Tolerance min. typ. max. typ.

0.3 ±0.1nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N3BT000

0.3 ±0.2nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N3CT000

0.4 ±0.1nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N4BT000

0.4 ±0.2nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N4CT000

0.5 ±0.1nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N5BT000

0.5 ±0.2nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N5CT000

0.6 ±0.1nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N6BT000

0.6 ±0.2nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N6CT000

0.7 ±0.1nH —100 10.0 18.7 0.10 0.02 1000 MLG1005S0N7BT000

0.7 ±0.2nH —100 10.0 18.7 0.10 0.02 1000 MLG1005S0N7CT000

0.8 ±0.1nH —100 10.0 16.4 0.10 0.02 1000 MLG1005S0N8BT000

0.8 ±0.2nH —100 10.0 16.4 0.10 0.02 1000 MLG1005S0N8CT000

0.9 ±0.1nH —100 10.0 17.7 0.10 0.04 1000 MLG1005S0N9BT000

0.9 ±0.2nH —100 10.0 17.7 0.10 0.04 1000 MLG1005S0N9CT000

1.0 ±0.1nH 7 100 10.0 13.8 0.10 0.04 1000 MLG1005S1N0BT000

1.0 ±0.2nH 7100 10.0 13.8 0.10 0.04 1000 MLG1005S1N0CT000

1.0 ±0.2nH 7 100 10.0 13.8 0.10 0.04 1000 MLG1005S1N0CT000

1.1 ±0.1nH 7100 10.0 19.3 0.10 0.03 1000 MLG1005S1N1BT000

1.1 ±0.2nH 7 100 10.0 19.3 0.10 0.03 1000 MLG1005S1N1CT000

1.1 ±0.3nH 7100 10.0 19.3 0.10 0.03 1000 MLG1005S1N1ST000

1.2 ±0.1nH 7 100 10.0 11.6 0.10 0.04 1000 MLG1005S1N2BT000

1.2 ±0.2nH 7100 10.0 11.6 0.10 0.04 1000 MLG1005S1N2CT000

1.2 ±0.3nH 7 100 10.0 11.6 0.10 0.04 1000 MLG1005S1N2ST000

1.3 ±0.1nH 7100 8.00 11.7 0.10 0.04 1000 MLG1005S1N3BT000

1.3 ±0.2nH 7 100 8.00 11.7 0.10 0.04 1000 MLG1005S1N3CT000

1.3 ±0.3nH 7100 8.00 11.7 0.10 0.04 1000 MLG1005S1N3ST000

1.5 ±0.1nH 7 100 8.00 9.6 0.10 0.06 1000 MLG1005S1N5BT000

1.5 ±0.2nH 7100 8.00 9.6 0.10 0.06 1000 MLG1005S1N5CT000

1.5 ±0.3nH 7 100 8.00 9.6 0.10 0.06 1000 MLG1005S1N5ST000

1.6 ±0.1nH 7100 7.50 9.4 0.12 0.05 1000 MLG1005S1N6BT000

1.6 ±0.2nH 7 100 7.50 9.4 0.12 0.05 1000 MLG1005S1N6CT000

1.6 ±0.3nH 7100 7.50 9.4 0.12 0.05 1000 MLG1005S1N6ST000

1.8 ±0.1nH 7 100 8.00 10.3 0.15 0.06 900 MLG1005S1N8BT000

1.8 ±0.2nH 7100 8.00 10.3 0.15 0.06 900 MLG1005S1N8CT000

1.8 ±0.3nH 7 100 8.00 10.3 0.15 0.06 900 MLG1005S1N8ST000

2.0 ±0.1nH 7100 7.50 9.3 0.15 0.07 900 MLG1005S2N0BT000

2.0 ±0.2nH 7 100 7.50 9.3 0.15 0.07 900 MLG1005S2N0CT000

2.0 ±0.3nH 7100 7.50 9.3 0.15 0.07 900 MLG1005S2N0ST000

2.2 ±0.1nH 7 100 7.00 8.6 0.15 0.08 900 MLG1005S2N2BT000

2.2 ±0.2nH 7100 7.00 8.6 0.15 0.08 900 MLG1005S2N2CT000

2.2 ±0.3nH 7 100 7.00 8.6 0.15 0.08 900 MLG1005S2N2ST000

2.4 ±0.1nH 7100 7.00 8.2 0.15 0.08 800 MLG1005S2N4BT000

2.4 ±0.2nH 7 100 7.00 8.2 0.15 0.08 800 MLG1005S2N4CT000

2.4 ±0.3nH 7100 7.00 8.2 0.15 0.08 800 MLG1005S2N4ST000

Measurement item Product No. Manufacturer

L, Q 4291B +16193A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(17/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1005S Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

 Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

min.

L, Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.*

(nH) Tolerance min. typ. max. typ.

2.7 ±0.1nH 7 100 6.00 7.3 0.15 0.08 800 MLG1005S2N7BT000

2.7 ±0.2nH 7100 6.00 7.3 0.15 0.08 800 MLG1005S2N7CT000

2.7 ±0.3nH 7 100 6.00 7.3 0.15 0.08 800 MLG1005S2N7ST000

3.0 ±0.1nH 7100 5.50 6.8 0.20 0.09 800 MLG1005S3N0BT000

3.0 ±0.2nH 7 100 5.50 6.8 0.20 0.09 800 MLG1005S3N0CT000

3.0 ±0.3nH 7100 5.50 6.8 0.20 0.09 800 MLG1005S3N0ST000

3.3 ±0.1nH 8 100 5.00 6.1 0.20 0.09 800 MLG1005S3N3BT000

3.3 ±0.2nH 8100 5.00 6.1 0.20 0.09 800 MLG1005S3N3CT000

3.3 ±0.3nH 8 100 5.00 6.1 0.20 0.09 800 MLG1005S3N3ST000

3.6 ±0.1nH 8100 5.00 6.7 0.20 0.09 700 MLG1005S3N6BT000

3.6 ±0.2nH 8 100 5.00 6.7 0.20 0.09 700 MLG1005S3N6CT000

3.6 ±0.3nH 8100 5.00 6.7 0.20 0.09 700 MLG1005S3N6ST000

3.9 ±0.1nH 8 100 5.00 6.5 0.20 0.11 700 MLG1005S3N9BT000

3.9 ±0.2nH 8100 5.00 6.5 0.20 0.11 700 MLG1005S3N9CT000

3.9 ±0.3nH 8 100 5.00 6.5 0.20 0.11 700 MLG1005S3N9ST000

4.3 ±0.2nH 8100 4.50 6.0 0.20 0.11 700 MLG1005S4N3CT000

4.3 ±0.3nH 8 100 4.50 6.0 0.20 0.11 700 MLG1005S4N3ST000

4.7 ±0.2nH 8100 4.50 5.4 0.25 0.12 700 MLG1005S4N7CT000

4.7 ±0.3nH 8 100 4.50 5.4 0.25 0.12 700 MLG1005S4N7ST000

5.1 ±0.2nH 8100 4.00 5.0 0.25 0.13 600 MLG1005S5N1CT000

5.1 ±0.3nH 8 100 4.00 5.0 0.25 0.13 600 MLG1005S5N1ST000

5.6 ±0.2nH 8100 4.00 5.3 0.25 0.14 600 MLG1005S5N6CT000

5.6 ±0.3nH 8 100 4.00 5.3 0.25 0.14 600 MLG1005S5N6ST000

6.2 ±3% 8100 4.00 4.7 0.25 0.16 600 MLG1005S6N2HT000

6.2 ±0.3nH 8 100 4.00 4.7 0.25 0.16 600 MLG1005S6N2ST000

6.8 ±3% 8100 3.50 4.4 0.25 0.15 600 MLG1005S6N8HT000

7 ±5% 8 100 3.50 4.4 0.25 0.15 600 MLG1005S6N8JT000

7.5 ±3% 8100 3.00 4.1 0.25 0.15 500 MLG1005S7N5HT000

8 ±5% 8 100 3.00 4.1 0.25 0.15 500 MLG1005S7N5JT000

8.2 ±3% 8100 3.00 4.0 0.30 0.19 500 MLG1005S8N2HT000

8 ±5% 8 100 3.00 4.0 0.30 0.19 500 MLG1005S8N2JT000

9.1 ±3% 8100 3.00 3.8 0.30 0.20 500 MLG1005S9N1HT000

9 ±5% 8 100 3.00 3.8 0.30 0.20 500 MLG1005S9N1JT000

10.0 ±3% 8100 2.50 3.4 0.35 0.22 500 MLG1005S10NHT000

10 ±5% 8 100 2.50 3.4 0.35 0.22 500 MLG1005S10NJT000

11.0 ±3% 8100 2.50 3.5 0.40 0.28 400 MLG1005S11NHT000

11 ±5% 8 100 2.50 3.5 0.40 0.28 400 MLG1005S11NJT000

12.0 ±3% 8100 2.50 3.0 0.40 0.25 400 MLG1005S12NHT000

12 ±5% 8 100 2.50 3.0 0.40 0.25 400 MLG1005S12NJT000

13.0 ±3% 8100 2.40 2.9 0.50 0.26 400 MLG1005S13NHT000

13 ±5% 8 100 2.40 2.9 0.50 0.26 400 MLG1005S13NJT000

15 ±3% 8100 2.20 2.8 0.55 0.35 400 MLG1005S15NHT000

15 ±5% 8 100 2.20 2.8 0.55 0.35 400 MLG1005S15NJT000

16 ±3% 8100 2.10 2.7 0.55 0.32 400 MLG1005S16NHT000

16 ±5% 8 100 2.10 2.7 0.55 0.32 400 MLG1005S16NJT000

Measurement item Product No. Manufacturer

L, Q 4291B +16193A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(18/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1005S Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

 Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

min.

L, Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.*

(nH) Tolerance min. typ. max. typ.

18 ±3% 8 100 2.00 2.5 0.60 0.40 350 MLG1005S18NHT000

18 ±5% 8100 2.00 2.5 0.60 0.40 350 MLG1005S18NJT000

20 ±3% 8 100 1.90 2.4 0.60 0.38 350 MLG1005S20NHT000

20 ±5% 8100 1.90 2.4 0.60 0.38 350 MLG1005S20NJT000

22 ±3% 8 100 1.70 2.2 0.70 0.46 350 MLG1005S22NHT000

22 ±5% 8100 1.70 2.2 0.70 0.46 350 MLG1005S22NJT000

24 ±3% 8 100 1.70 2.1 0.70 0.43 350 MLG1005S24NHT000

24 ±5% 8100 1.70 2.1 0.70 0.43 350 MLG1005S24NJT000

27 ±3% 8 100 1.60 2.0 0.80 0.53 300 MLG1005S27NHT000

27 ±5% 8100 1.60 2.0 0.80 0.53 300 MLG1005S27NJT000

30 ±3% 8 100 1.50 1.9 0.80 0.50 300 MLG1005S30NHT000

30 ±5% 8100 1.50 1.9 0.80 0.50 300 MLG1005S30NJT000

33 ±3% 8 100 1.40 1.8 0.90 0.59 300 MLG1005S33NHT000

33 ±5% 8100 1.40 1.8 0.90 0.59 300 MLG1005S33NJT000

36 ±3% 8 100 1.30 1.7 1.00 0.62 250 MLG1005S36NHT000

36 ±5% 8100 1.30 1.7 1.00 0.62 250 MLG1005S36NJT000

39 ±3% 8 100 1.20 1.6 1.00 0.65 250 MLG1005S39NHT000

39 ±5% 8100 1.20 1.6 1.00 0.65 250 MLG1005S39NJT000

43 ±3% 8 100 1.20 1.6 1.10 0.67 250 MLG1005S43NHT000

43 ±5% 8100 1.20 1.6 1.10 0.67 250 MLG1005S43NJT000

47 ±3% 8 100 1.10 1.4 1.20 0.75 250 MLG1005S47NHT000

47 ±5% 8100 1.10 1.4 1.20 0.75 250 MLG1005S47NJT000

51 ±3% 8 100 1.10 1.5 1.20 0.72 250 MLG1005S51NHT000

51 ±5% 8100 1.10 1.5 1.20 0.72 250 MLG1005S51NJT000

56 ±3% 8 100 1.00 1.3 1.30 0.83 200 MLG1005S56NHT000

56 ±5% 8100 1.00 1.3 1.30 0.83 200 MLG1005S56NJT000

62 ±3% 8 100 1.00 1.3 1.40 0.85 200 MLG1005S62NHT000

62 ±5% 8100 1.00 1.3 1.40 0.85 200 MLG1005S62NJT000

68 ±3% 8 100 0.80 1.1 1.50 0.87 200 MLG1005S68NHT000

68 ±5% 8100 0.80 1.1 1.50 0.87 200 MLG1005S68NJT000

75 ±3% 8 100 0.75 1.1 1.50 0.93 200 MLG1005S75NHT000

75 ±5% 8100 0.75 1.1 1.50 0.93 200 MLG1005S75NJT000

82 ±3% 8 100 0.70 1.0 1.60 1.01 200 MLG1005S82NHT000

82 ±5% 8100 0.70 1.0 1.60 1.01 200 MLG1005S82NJT000

91 ±3% 8 100 0.70 0.9 1.80 1.14 200 MLG1005S91NHT000

91 ±5% 8100 0.70 0.9 1.80 1.14 200 MLG1005S91NJT000

100 ±3% 8 100 0.70 0.9 2.00 1.37 200 MLG1005SR10HT000

100 ±5% 8100 0.70 0.9 2.00 1.37 200 MLG1005SR10JT000

110 ±3% 8 100 0.70 0.9 2.20 1.48 150 MLG1005SR11HT000

110 ±5% 8100 0.70 0.9 2.20 1.48 150 MLG1005SR11JT000

120 ±3% 8 100 0.60 0.8 2.20 1.48 150 MLG1005SR12HT000

120 ±5% 8100 0.60 0.8 2.20 1.48 150 MLG1005SR12JT000

130 ±3% 8 100 0.60 0.8 2.50 1.68 150 MLG1005SR13HT000

130 ±5% 8100 0.60 0.8 2.50 1.68 150 MLG1005SR13JT000

150 ±3% 8 100 0.55 0.7 3.50 2.44 150 MLG1005SR15HT000

150 ±5% 8100 0.55 0.7 3.50 2.44 150 MLG1005SR15JT000

Measurement item Product No. Manufacturer

L, Q 4291B +16193A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(19/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1005S Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

 Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

min.

L, Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.*

(nH) Tolerance min. typ. max. typ.

160 ±3% 8 100 0.50 0.6 3.80 2.74 150 MLG1005SR16HT000

160 ±5% 8100 0.50 0.6 3.80 2.74 150 MLG1005SR16JT000

180 ±3% 8 100 0.50 0.6 3.80 2.88 150 MLG1005SR18HT000

180 ±5% 8100 0.50 0.6 3.80 2.88 150 MLG1005SR18JT000

200 ±3% 8 100 0.42 0.5 4.20 3.15 100 MLG1005SR20HT000

200 ±5% 8100 0.42 0.5 4.20 3.15 100 MLG1005SR20JT000

220 ±3% 8 100 0.45 0.5 4.20 3.02 100 MLG1005SR22HT000

220 ±5% 8100 0.45 0.5 4.20 3.02 100 MLG1005SR22JT000

240 ±3% 8 100 0.40 0.5 4.80 3.42 100 MLG1005SR24HT000

240 ±5% 8100 0.40 0.5 4.80 3.42 100 MLG1005SR24JT000

270 ±3% 8 100 0.40 0.5 4.80 3.54 100 MLG1005SR27HT000

270 ±5% 8100 0.40 0.5 4.80 3.54 100 MLG1005SR27JT000

300 ±3% 6 50 0.35 0.4 6.50 4.82 50 MLG1005SR30HT000

300 ±5% 650 0.35 0.4 6.50 4.82 50 MLG1005SR30JT000

330 ±3% 6 50 0.35 0.4 7.00 5.21 50 MLG1005SR33HT000

330 ±5% 650 0.35 0.4 7.00 5.21 50 MLG1005SR33JT000

360 ±3% 6 50 0.30 0.4 7.50 5.39 50 MLG1005SR36HT000

360 ±5% 650 0.30 0.4 7.50 5.39 50 MLG1005SR36JT000

390 ±3% 6 50 0.30 0.4 8.00 5.97 50 MLG1005SR39HT000

390 ±5% 650 0.30 0.4 8.00 5.97 50 MLG1005SR39JT000

Measurement item Product No. Manufacturer

L, Q 4291B +16193A Agilent Technologies

Self-resonant frequency 8720C Agilent Technologies

DC resistance Type-7561 Yokogawa

(20/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1005S Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.*

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

0.3 0.3 0.3 0.3 0.3 22min. 27min. 46min. 49min. 53min. MLG1005S0N3BT000

0.3 0.3 0.3 0.3 0.3 22min. 27min. 46min. 49min. 53min. MLG1005S0N3CT000

0.4 0.4 0.4 0.4 0.4 22min. 27min. 46min. 49min. 53min. MLG1005S0N4BT000

0.4 0.4 0.4 0.4 0.4 22min. 27min. 46min. 49min. 53min. MLG1005S0N4CT000

0.5 0.5 0.5 0.5 0.5 22min. 27min. 46min. 49min. 53min. MLG1005S0N5BT000

0.5 0.5 0.5 0.5 0.5 22min. 27min. 46min. 49min. 53min. MLG1005S0N5CT000

0.6 0.6 0.6 0.6 0.6 22 27 46 49 53 MLG1005S0N6BT000

0.6 0.6 0.6 0.6 0.6 22 27 46 49 53 MLG1005S0N6CT000

0.7 0.7 0.7 0.7 0.7 22 28 45 49 54 MLG1005S0N7BT000

0.7 0.7 0.7 0.7 0.7 22 28 45 49 54 MLG1005S0N7CT000

0.8 0.8 0.8 0.8 0.8 26 34 57 60 66 MLG1005S0N8BT000

0.8 0.8 0.8 0.8 0.8 26 34 57 60 66 MLG1005S0N8CT000

0.9 0.8 0.8 0.8 0.8 21 27 44 47 53 MLG1005S0N9BT000

0.9 0.8 0.8 0.8 0.8 21 27 44 47 53 MLG1005S0N9CT000

0.9 0.9 0.9 0.9 0.9 22 29 48 50 56 MLG1005S1N0BT000

0.9 0.9 0.9 0.9 0.9 22 29 48 50 56 MLG1005S1N0CT000

1.0 1.0 1.0 1.0 1.0 23 29 47 50 57 MLG1005S1N1BT000

1.0 1.0 1.0 1.0 1.0 23 29 47 50 57 MLG1005S1N1CT000

1.0 1.0 1.0 1.0 1.0 23 29 47 50 57 MLG1005S1N1ST000

1.1 1.1 1.1 1.1 1.1 23 29 48 50 56 MLG1005S1N2BT000

1.1 1.1 1.1 1.1 1.1 23 29 48 50 56 MLG1005S1N2CT000

1.1 1.1 1.1 1.1 1.1 23 29 48 50 56 MLG1005S1N2ST000

1.2 1.2 1.2 1.2 1.2 22 27 44 47 53 MLG1005S1N3BT000

1.2 1.2 1.2 1.2 1.2 22 27 44 47 53 MLG1005S1N3CT000

1.2 1.2 1.2 1.2 1.2 22 27 44 47 53 MLG1005S1N3ST000

1.4 1.4 1.4 1.5 1.5 23 29 47 50 56 MLG1005S1N5BT000

1.4 1.4 1.4 1.5 1.5 23 29 47 50 56 MLG1005S1N5CT000

1.4 1.4 1.4 1.5 1.5 23 29 47 50 56 MLG1005S1N5ST000

1.5 1.5 1.5 1.6 1.6 23 29 46 49 54 MLG1005S1N6BT000

1.5 1.5 1.5 1.6 1.6 23 29 46 49 54 MLG1005S1N6CT000

1.5 1.5 1.5 1.6 1.6 23 29 46 49 54 MLG1005S1N6ST000

1.7 1.7 1.7 1.7 1.7 20 26 41 43 49 MLG1005S1N8BT000

1.7 1.7 1.7 1.7 1.7 20 26 41 43 49 MLG1005S1N8CT000

1.7 1.7 1.7 1.7 1.7 20 26 41 43 49 MLG1005S1N8ST000

1.9 1.9 1.9 1.9 1.9 21 25 41 43 48 MLG1005S2N0BT000

1.9 1.9 1.9 1.9 1.9 21 25 41 43 48 MLG1005S2N0CT000

1.9 1.9 1.9 1.9 1.9 21 25 41 43 48 MLG1005S2N0ST000

2.1 2.1 2.1 2.1 2.2 22 27 44 47 52 MLG1005S2N2BT000

2.1 2.1 2.1 2.1 2.2 22 27 44 47 52 MLG1005S2N2CT000

2.1 2.1 2.1 2.1 2.2 22 27 44 47 52 MLG1005S2N2ST000

Product No. Manufacturer

4291B +16193A Agilent Technologies

(21/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1005S Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.*

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

2.3 2.3 2.3 2.3 2.4 21 26 42 44 49 MLG1005S2N4BT000

2.3 2.3 2.3 2.3 2.4 21 26 42 44 49 MLG1005S2N4CT000

2.3 2.3 2.3 2.3 2.4 21 26 42 44 49 MLG1005S2N4ST000

2.6 2.6 2.6 2.7 2.7 22 27 43 45 50 MLG1005S2N7BT000

2.6 2.6 2.6 2.7 2.7 22 27 43 45 50 MLG1005S2N7CT000

2.6 2.6 2.6 2.7 2.7 22 27 43 45 50 MLG1005S2N7ST000

2.9 2.9 3.0 3.0 3.1 24 29 47 49 54 MLG1005S3N0BT000

2.9 2.9 3.0 3.0 3.1 24 29 47 49 54 MLG1005S3N0CT000

2.9 2.9 3.0 3.0 3.1 24 29 47 49 54 MLG1005S3N0ST000

3.2 3.2 3.3 3.4 3.5 24 30 46 48 53 MLG1005S3N3BT000

3.2 3.2 3.3 3.4 3.5 24 30 46 48 53 MLG1005S3N3CT000

3.2 3.2 3.3 3.4 3.5 24 30 46 48 53 MLG1005S3N3ST000

3.4 3.4 3.6 3.6 3.8 21 26 40 42 46 MLG1005S3N6BT000

3.4 3.4 3.6 3.6 3.8 21 26 40 42 46 MLG1005S3N6CT000

3.4 3.4 3.6 3.6 3.8 21 26 40 42 46 MLG1005S3N6ST000

3.7 3.7 3.9 3.9 4.1 22 28 43 45 50 MLG1005S3N9BT000

3.7 3.7 3.9 3.9 4.1 22 28 43 45 50 MLG1005S3N9CT000

3.7 3.7 3.9 3.9 4.1 22 28 43 45 50 MLG1005S3N9ST000

4.1 4.1 4.3 4.4 4.6 24 30 47 49 53 MLG1005S4N3CT000

4.1 4.1 4.3 4.4 4.6 24 30 47 49 53 MLG1005S4N3ST000

4.5 4.5 4.8 4.9 5.2 23 30 45 47 50 MLG1005S4N7CT000

4.5 4.5 4.8 4.9 5.2 23 30 45 47 50 MLG1005S4N7ST000

4.9 4.9 5.4 5.6 6.1 23 29 42 43 44 MLG1005S5N1CT000

4.9 4.9 5.4 5.6 6.1 23 29 42 43 44 MLG1005S5N1ST000

5.4 5.4 5.8 5.9 6.3 22 28 42 43 45 MLG1005S5N6CT000

5.4 5.4 5.8 5.9 6.3 22 28 42 43 45 MLG1005S5N6ST000

6 6 6.8 7.1 7.8 24 29 42 43 43 MLG1005S6N2HT000

6 6 6.8 7.1 7.8 24 29 42 43 43 MLG1005S6N2ST000

6.5 6.6 7.4 7.8 8.6 23 28 40 41 41 MLG1005S6N8HT000

6.5 6.6 7.4 7.8 8.6 23 28 40 41 41 MLG1005S6N8JT000

7.2 7.4 8.6 9.2 10.5 24 30 41 41 39 MLG1005S7N5HT000

7.2 7.4 8.6 9.2 10.5 24 30 41 41 39 MLG1005S7N5JT000

7.9 8 9.3 9.9 11.3 23 28 38 38 36 MLG1005S8N2HT000

7.9 89.3 9.9 11.3 23 28 38 38 36 MLG1005S8N2JT000

8.8 9 10.8 11.6 13.7 24 30 40 39 36 MLG1005S9N1HT000

8.8 910.8 11.6 13.7 24 30 40 39 36 MLG1005S9N1JT000

9.7 9.9 12.4 13.5 16.7 24 30 37 36 31 MLG1005S10NHT000

9.7 9.9 12.4 13.5 16.7 24 30 37 36 31 MLG1005S10NJT000

10.6 10.9 13.8 15.1 19 23 28 34 33 28 MLG1005S11NHT000

10.6 10.9 13.8 15.1 19 23 28 34 33 28 MLG1005S11NJT000

Product No. Manufacturer

4291B +16193A Agilent Technologies

(22/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1005S Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.*

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

11.7 12.1 16.2 18.3 23 29 33 31 MLG1005S12NHT000

11.7 12.1 16.2 18.3 23 29 33 31 MLG1005S12NJT000

12.6 13 18.3 21.3 20 24 25 22 MLG1005S13NHT000

12.6 13 18.3 21.3 20 24 25 22 MLG1005S13NJT000

14.7 15.3 22.0 26.0 23 28 29 26 MLG1005S15NHT000

14.7 15.3 22.0 26.0 23 28 29 26 MLG1005S15NJT000

15.6 16.2 24.1 29.0 22 26 26 22 MLG1005S16NHT000

15.6 16.2 24.1 29.0 22 26 26 22 MLG1005S16NJT000

17.7 18.6 29.0 23 28 26 MLG1005S18NHT000

17.7 18.6 29.0 23 28 26 MLG1005S18NJT000

19.7 20.8 36.8 21 25 21 MLG1005S20NHT000

19.7 20.8 36.8 21 25 21 MLG1005S20NJT000

21.8 23.3 22 27 MLG1005S22NHT000

21.8 23.3 22 27 MLG1005S22NJT000

23.8 25.5 22 26 MLG1005S24NHT000

23.8 25.5 22 26 MLG1005S24NJT000

27 29.6 20 23 MLG1005S27NHT000

27 29.6 20 23 MLG1005S27NJT000

30.1 33.5 19 21 MLG1005S30NHT000

30.1 33.5 19 21 MLG1005S30NJT000

33.5 37.8 20 23 MLG1005S33NHT000

33.5 37.8 20 23 MLG1005S33NJT000

36.7 41.5 21 23 MLG1005S36NHT000

36.7 41.5 21 23 MLG1005S36NJT000

40.3 46.9 20 21 MLG1005S39NHT000

40.3 46.9 20 21 MLG1005S39NJT000

44.3 51.6 20 21 MLG1005S43NHT000

44.3 51.6 20 21 MLG1005S43NJT000

50.2 63.2 19 20 MLG1005S47NHT000

50.2 63.2 19 20 MLG1005S47NJT000

53.7 65.6 19 19 MLG1005S51NHT000

53.7 65.6 19 19 MLG1005S51NJT000

60.9 80.2 19 18 MLG1005S56NHT000

60.9 80.2 19 18 MLG1005S56NJT000

67.5 89.8 18 16 MLG1005S62NHT000

67.5 89.8 18 16 MLG1005S62NJT000

75.8 107.5 17 15 MLG1005S68NHT000

75.8 107.5 17 15 MLG1005S68NJT000

86.5 135.2 17 13 MLG1005S75NHT000

86.5 135.2 17 13 MLG1005S75NJT000

Product No. Manufacturer

4291B +16193A Agilent Technologies

(23/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1005S Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

Please contact us for ±2% inductance tolerance (code G) products.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.*

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

96.9 16 MLG1005S82NHT000

96.9 16 MLG1005S82NJT000

111.0 15 MLG1005S91NHT000

111.0 15 MLG1005S91NJT000

128.9 14 MLG1005SR10HT000

128.9 14 MLG1005SR10JT000

140.8 15 MLG1005SR11HT000

140.8 15 MLG1005SR11JT000

175.2 12 MLG1005SR12HT000

175.2 12 MLG1005SR12JT000

187.8 13 MLG1005SR13HT000

187.8 13 MLG1005SR13JT000

284.7 11 MLG1005SR15HT000

284.7 11 MLG1005SR15JT000

MLG1005SR16HT000

MLG1005SR16JT000

MLG1005SR18HT000

MLG1005SR18JT000

MLG1005SR20HT000

MLG1005SR20JT000

MLG1005SR22HT000

MLG1005SR22JT000

MLG1005SR24HT000

MLG1005SR24JT000

MLG1005SR27HT000

MLG1005SR27JT000

MLG1005SR30HT000

MLG1005SR30JT000

MLG1005SR33HT000

MLG1005SR33JT000

MLG1005SR36HT000

MLG1005SR36JT000

MLG1005SR39HT000

MLG1005SR39JT000

Product No. Manufacturer

4291B +16193A Agilent Technologies

(24/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1005S Type

ELECTRICAL CHARACTERISTICS

L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)

○Measurement equipment

＊ Equivalent measurement equipment may be used.

10 100 1000 10000

1000

100

Frequency(MHz)

Inductance(nH)

R39 R18

R15

68N

15N

12N

10N

8N2

6N8

1N2

1N0

5N6

4N7

3N9

3N3

2N7

2N2

1N8

1N5

18N

56N

47N

39N

33N

27N

22N

82N

R12

R27

R22 R10

R33

Product No. Manufacturer

E4991A +16193A Agilent Technologies

(25/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1005S Type

ELECTRICAL CHARACTERISTICS

Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)

○Measurement equipment

＊ Equivalent measurement equipment may be used.

10 100 1000 10000

Frequency(MHz)

R39

R18

R15

68N

15N

12N

10N

8N2

6N8

1N2

1N0

5N6

4N7

3N9

3N3

2N7

2N2

1N8

1N5

18N

56N

47N

39N

33N

27N

22N

82N

R12

R33

R27

R22

R10

Product No. Manufacturer

E4991A +16193A Agilent Technologies

(26/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries

MLG1608Type

SHAPE & DIMENSIONS

RECOMMENDED LAND PATTERN

Dimensions in mm

1.60±0.15

0.30±0.20 0.30±0.20

0.80±0.15 0.80±0.15

Dimensions in mm

0.8

0.6 0.8 0.6

(27/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1608 Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE

* Because it provides for a product of smaller inductance tolerance, please refer.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

min.

L, Q measuring

frequency

(MHz)

Self-resonant

frequency

(GHz)

DC resistance

(:)

Rated current

(mA)

max.

Part No.

(nH) Tolerance min. typ. max. typ.

1 ±0.3nH 8 100 10.0 20up 0.10 0.03 600 MLG1608B1N0ST000

1.2 ±0.3nH 8100 10.0 20up 0.10 0.04 600 MLG1608B1N2ST000

1.5 ±0.3nH 8 100 10.0 19.6 0.10 0.03 600 MLG1608B1N5ST000

1.8 ±0.3nH 8100 10.0 16.6 0.10 0.04 600 MLG1608B1N8ST000

2.2 ±0.3nH 10 100 8.0 10.8 0.10 0.05 600 MLG1608B2N2ST000

2.7 ±0.3nH 10 100 7.0 8.8 0.12 0.06 600 MLG1608B2N7ST000

3.3 ±0.3nH 10 100 6.5 8.8 0.12 0.06 600 MLG1608B3N3ST000

3.9 ±0.3nH 10 100 6.0 7.9 0.14 0.06 600 MLG1608B3N9ST000

4.7 ±0.3nH 10 100 5.0 6.8 0.15 0.08 600 MLG1608B4N7ST000

5.6 ±0.5nH 10 100 5.0 6.8 0.16 0.08 600 MLG1608B5N6DT000

6.8 ±0.5nH 10 100 4.5 5.7 0.18 0.10 600 MLG1608B6N8DT000

8.2 ±0.5nH 10 100 4.5 5.6 0.20 0.10 600 MLG1608B8N2DT000

10 ±5% 12 100 3.5 4.5 0.20 0.11 600 MLG1608B10NJT000

12 ±5% 12 100 3.0 3.8 0.25 0.13 600 MLG1608B12NJT000

15 ±5% 12 100 2.8 3.6 0.28 0.14 600 MLG1608B15NJT000

18 ±5% 12 100 2.6 3.3 0.32 0.16 600 MLG1608B18NJT000

22 ±5% 12 100 2.3 3.0 0.35 0.19 500 MLG1608B22NJT000

27 ±5% 12 100 2.0 2.7 0.40 0.21 500 MLG1608B27NJT000

33 ±5% 12 100 1.8 2.3 0.50 0.25 500 MLG1608B33NJT000

39 ±5% 12 100 1.6 2.0 0.55 0.26 400 MLG1608B39NJT000

47 ±5% 14 100 1.4 1.8 0.60 0.35 400 MLG1608B47NJT000

56 ±5% 14 100 1.2 1.8 0.70 0.41 400 MLG1608B56NJT000

68 ±5% 14 100 1.1 1.6 0.75 0.43 300 MLG1608B68NJT000

82 ±5% 14 100 1.0 1.4 0.80 0.50 300 MLG1608B82NJT000

100 ±5% 14 100 0.80 1.2 1.00 0.64 300 MLG1608BR10JT000

120 ±5% 14 100 0.65 0.8 1.20 0.89 300 MLG1608SR12JT000

150 ±5% 14 100 0.55 0.7 1.30 1.03 250 MLG1608SR15JT000

180 ±5% 14 100 0.50 0.6 1.40 1.08 250 MLG1608SR18JT000

220 ±5% 14 100 0.45 0.6 1.70 1.29 200 MLG1608SR22JT000

270 ±5% 14 100 0.35 0.5 2.00 1.59 200 MLG1608SR27JT000

330 ±5% 10 50 0.35 0.47 2.80 1.90 100 MLG1608SR33JT000

390 ±5% 10 50 0.30 0.43 3.00 2.06 100 MLG1608SR39JT000

470 ±5% 10 50 0.25 0.39 3.50 2.47 100 MLG1608SR47JT000

560 ±5% 10 50 0.25 0.36 4.50 3.20 70 MLG1608SR56JT000

680 ±5% 10 50 0.20 0.31 5.50 3.88 70 MLG1608SR68JT000

820 ±5% 10 50 0.15 0.22 5.50 3.76 70 MLG1608SR82JT000

1000 ±5% 10 50 0.13 0.19 5.50 4.27 70 MLG1608S1R0JT000

Measurement item Product No. Manufacturer

L, Q 4291B +16193A Agilent Technologies

Self-resonant frequency 8720C Panasonic

DC resistance Type-7561 Yokogawa

(28/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1608 Type

ELECTRICAL CHARACTERISTICS

L, Q FREQUENCY CHARACTERISTICS TABLE

 Because it provides for a product of smaller inductance tolerance, please refer.

○Measurement equipment

＊ Equivalent measurement equipment may be used.

L(nH)typ. Q typ. Part No.*

500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz

1.0 1.0 1.0 1.0 1.0 39 48 77 82 95 MLG1608B1N0ST000

1.2 1.1 1.2 1.2 1.2 28 35 57 60 68 MLG1608B1N2ST000

1.5 1.5 1.5 1.5 1.5 37 48 78 81 93 MLG1608B1N5ST000

1.8 1.8 1.8 1.8 1.8 38 48 77 81 95 MLG1608B1N8ST000

2.2 2.1 2.2 2.2 2.2 44 54 88 91 107 MLG1608B2N2ST000

2.6 2.6 2.7 2.7 2.8 40 51 79 81 94 MLG1608B2N7ST000

3.2 3.2 3.3 3.3 3.4 38 48 76 79 91 MLG1608B3N3ST000

3.8 3.8 4.0 4.0 4.1 40 50 79 81 93 MLG1608B3N9ST000

4.6 4.6 4.9 5.0 5.2 41 51 76 79 88 MLG1608B4N7ST000

5.4 5.5 5.8 5.9 6.2 37 46 69 71 79 MLG1608B5N6DT000

6.6 6.7 7.3 7.5 8.0 38 47 67 68 74 MLG1608B6N8DT000

8.0 8.1 8.9 9.3 10 39 48 67 68 71 MLG1608B8N2DT000

9.8 10.0 11.5 12.1 13.6 38 47 63 63 61 MLG1608B10NJT000

11.8 12.1 14.8 16.0 19.3 39 48 59 57 51 MLG1608B12NJT000

14.8 15.4 20.6 23.4 38 46 49 46 MLG1608B15NJT000

17.8 18.5 25.5 29.3 36 44 47 42 MLG1608B18NJT000

21.9 22.9 33.6 40.2 36 44 43 38 MLG1608B22NJT000

27.1 28.8 50.6 37 43 34 MLG1608B27NJT000

33.4 36.0 37 43 MLG1608B33NJT000

40.2 45.0 36 40 MLG1608B39NJT000

49.1 56.0 38 41 MLG1608B47NJT000

59.6 71.1 37 38 MLG1608B56NJT000

74.0 92.8 34 33 MLG1608B68NJT000

91.1 120.6 33 31 MLG1608B82NJT000

118 35 MLG1608BR10JT000

188 23 MLG1608SR12JT000

MLG1608SR15JT000

MLG1608SR18JT000

MLG1608SR22JT000

MLG1608SR27JT000

MLG1608SR33JT000

MLG1608SR39JT000

MLG1608SR47JT000

MLG1608SR56JT000

MLG1608SR68JT000

MLG1608SR82JT000

MLG1608S1R0JT000

Product No. Manufacturer

4291B +16193A Agilent Technologies

(29/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1608Type

ELECTRICAL CHARACTERISTICS

L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)

○Measurement equipment

＊ Equivalent measurement equipment may be used.

10 100 1000 10000

10000

1000

100

Frequency(MHz)

Inductance(nH)

1R0 R82

R68 R56

R47

R39

R33

R27

R22 R18

R15

R12

R10 82N

68N

56N

47N

39N

33N

27N

22N

18N

15N

12N

10N

8N2

6N8

5N6

4N7

3N9

3N3

2N7

2N2

1N8

1N5

1N2

1N0

Product No. Manufacturer

E4991A +16193A Agilent Technologies

(30/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries MLG1608Type

ELECTRICAL CHARACTERISTICS

Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)

○Measurement equipment

＊ Equivalent measurement equipment may be used.

10 100 1000 10000

Frequency(MHz)

100

1R0 R82

R68 R27

R15

R12

R10 82N

68N

56N

39N

33N

27N

22N

18N

15N

12N

10N

8N2

5N6

4N7

3N3

2N2

1N2

1N0

47N

R18

R22

3N9

1N5

2N7

1N8

6N8

R56

R47

R39

R33

Product No. Manufacturer

E4991A +16193A Agilent Technologies

(31/31)

INDUCTORS

001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm

• All specifications are subject to change without notice.

MLGseries

Packaging Style

REEL DIMENSIONS

TAPE DIMENSIONS

1.0

ø180±2.0

2.0±0.5

ø13±0.2

ø21±0.8

ø60min.

14.4max.

Dimensions in mm

8.4 +2.0

–0.0

8.0±0.3 3.5±0.05

1.75±0.1

4.0±0.1

1.5 +0.1

–0.0

Sprocket hole Cavity

2.0±0.05 2.0±0.05

160min. Taping 200min.

300min.

Drawing direction

Dimensions in mm

Type A B K

MLG0603S 0.68±0.05 0.38±0.05 0.5 max.

MLG1005S 1.12±0.1 0.62±0.1 0.8 max.

MLG1608 1.9±0.2 1.1±0.2 1.1 max.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TDK:

MLG1608B12NJ MLG1608B1N8S MLG1608B3N9S MLG1608BR10J MLG1608B10NJ MLG1608B18NJ

MLG1608B1N0S MLG1608B1N5S MLG1608B2N7S MLG1608B3N3S MLG1608B6N8D MLG1005S22NJ

MLG1005S0N7C MLG1005S0N9C MLG1005S1N3S MLG1005S1N6S MLG1005S2N4S MLG1005S3N6S

MLG1005S4N3S MLG1005S7N5J MLG1005S9N1J MLG1608SR15J MLG1608SR22J MLG1608SR27J

MLG1005S4N7S MLG1005S12NJ MLG1005SR12J MLG1005SR22J MLG0603S2N2S MLG0603S4N7S

MLG0603S12NJT MLG1005S0N6CT MLG1005S1N5ST MLG1005S2N0ST MLG1005S3N0ST MLG1005S6N2ST

MLG1005S6N8JT MLG1005S82NJT MLG1005SR39JT MLG0603S0N3C MLG1608S1R0J MLG1608SR33J

MLG1608SR47J MLG1005S0N3C MLG1005S0N4C MLG1005S13NJ MLG1005S43NJ MLG1005S51NJ

MLG1005S75NJ MLG1005SR16J MLG1005SR20J MLG1608SR68JT000 MLG0603S5N6ST000

MLG1005S33NJT000 MLG1608SR27JT000 MLG1005S47NJT000 MLG1005S1N8ST000 MLG0603S30NJT000

MLG1005S0N3CT000 MLG1005SR36JT000 MLG0603S5N1ST000 MLG1005S0N8CT000 MLG0603S13NJT000

MLG0603S2N4ST000 MLG1608B1N0ST000 MLG1005S2N4ST000 MLG0603S56NJT000 MLG1005S0N7CT000

MLG0603S0N3CT000 MLG0603S24NJT000 MLG1005S8N2JT000 MLG0603S20NJT000 MLG1005S43NJT000

MLG1608B2N2ST000 MLG1608SR47JT000 MLG0603S7N5JT000 MLG0603S22NJT000 MLG0603S8N2JT000

MLG1005SR18JT000 MLG0603S3N0ST000 MLG1005S15NJT000 MLG0603S33NJT000 MLG1005S27NJT000

MLG1608B3N3ST000 MLG1005S56NJT000 MLG0603S1N0ST000 MLG1608B82NJT000 MLG1608SR18JT000

MLG0603S2N7ST000 MLG1005S68NJT000 MLG1005SR30JT000 MLG0603SR10JT000 MLG1005S39NJT000

MLG1005S16NJT000 MLG1005S24NJT000 MLG0603S3N3ST000 MLG1005SR22JT000 MLG1005S75NJT000

MLG0603S0N6CT000 MLG1005S0N5CT000