6
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
7
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your speci c application - process details with
NIC’s technical support personnel: tpmg@niccomp.com
Surface Mount Aluminum Electrolytic Capacitors NACL Series
FEATURES
• CYLINDRICAL V-CHIP CONSTRUCTION
• LOW LEAKAGE CURRENT (0.5µA TO 2.0µA max.)
• LOW COST TANTALUM REPLACEMENT
• DESIGNED FOR REFLOW SOLDERING
CHARACTERISTICS
MAXIMUM PERMISSIBLE RIPPLE CURRENT
(mA rms AT 120Hz AND 85OC)
MAXIMUM ESR
(Ω AT 120Hz AND 20OC)
ycneuqerF zH05 ≤zH001<f zH001 ≤zHK1<f zHK1 ≤zHK01<f f ≥zHK01
noitcerroC
rotcaF 8.0 0.1 3.1 5.1
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details
RIPPLE CURRENT FREQUENCY CORRECTION FACTOR
Rated Voltage Rating 6.3 ~ 50Vdc
Rated Capacitance Range 0.1 ~ 100µF
Operating Temperature Range -40° ~ +85°C
Capacitance Tolerance ±20%(M)
Max. Leakage Current After 2 Minutes at 20°C 0.002CV or 0.5µA, whichever is greater
Surge Voltage & Max. Tanδ
W.V. (Vdc) 6.3 10 16 25 35 50
S.V. (Vdc) 8.0 13 20 32 44 63
Tanδ @ 120Hz/20°C 0.24 0.20 0.18 0.14 0.12 0.10
Low Temperature
Stability
(Impedance Ratio @ 120Hz)
W.V. (Vdc) 6.3 10 16 25 35 50
Z-40°C/Z +20°C 4 3 2 2 2 2
Z-55°C/Z +20°C 8 8 4 4 4 4
Load Life Test
at Rated W.V.
85°C 2,000 Hours
Capacitance Change Within ±25% of initial measured value
TanδLess than 200% of speci ed value
Leakage Current Less than speci ed value
Cap.
(µF)
Working Voltage (Vdc)
6.3 10 16 25 35 50
0.1 - - - - - 1.0
0.22 - - - - - 2.3
0.33 - - - - - 3.5
0.47 - - - - - 5
1.0 - - - - - 10
2.2 - - - - - 15
3.3 - - - - - 18
4.7 - - - 18 20 23
10 - - 25 28 30 34
22 31 35 39 52 54 -
33 39 43 57 63 - -
47 47 59 68 - - -
100 71 76 - - - -
Cap.
(µF)
Working Voltage (Vdc)
6.3 10 16 25 35 50
0.1 - - - - - 1660
0.22 - - - - - 754
0.33 - - - - - 503
0.47 - - - - - 353
1.0 - - - - - 166
2.2 - - - - - 75.4
3.3 - - - - - 50.3
4.7 - - - 49.5 42.3 35.3
10 - - 26.5 23.2 19.9 16.6
22 18.1 15.1 12.1 10.6 9.05 -
33 12.6 10.1 8.04 7.04 - -
47 8.47 7.06 5.65 - - -
100 3.98 3.32 - - - -
8
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
9
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Surface Mount Aluminum Electrolytic Capacitors NACL Series
DIMENSIONS (mm)
PART NUMBER SYSTEM
NACL 100 M 35V 4.5x5.5 TR 13 F
RoHS Compliant
97% Sn (min.), 3% Bi (max.)
330mm (13”) Reel
Tape & Reel
Size in mm
Working Voltage
Tolerance Code M=20%, K=10%
Capacitance Code in µF, rst 2 digits are signicant
Third digit is no. of zeros, “R” indicates decimal for
values under 10µF
Series
0.3mm max.
Dφ
L
+ -
II
W
P
A
B
STANDARD PRODUCT AND CASE SIZE Dφ xL (mm)
Case Size Dφ±0.5 L max. A/B±0.2 I ± 0.2 W P±0.2
4x5.5 4.0 5.5 4.3 1.8 0.5 ~ 0.8 1.0
5x5.5 5.0 5.5 5.3 2.1 0.5 ~ 0.8 1.4
6.3x5.5 6.3 5.5 6.6 2.5 0.5 ~ 0.8 2.2
Cap.
(µF) Code Working Voltage (Vdc)
6.3 10 16 25 35 50
0.1 R10 - - - - - 4x5.5
0.22 R22 - - - - - 4x5.5
0.33 R33 - - - - - 4x5.5
0.47 R47 - - - - - 4x5.5
1.0 1R0 - - - - - 4x5.5
2.2 2R2 - - - - - 4x5.5
3.3 3R3 - - - - - 4x5.5
4.7 4R7 - - - 4x5.5 4x5.5 5x5.5
10 100 - - 4x5.5 5x5.5 5x5.5 6.3x5.5
22 220 4x5.5 5x5.5 5x5.5 6.3x5.5 6.3x5.5 -
33 330 5x5.5 5x5.5 6.3x5.5 6.3x5.5 - -
47 470 5x5.5 6.3x5.5 6.3x5.5 - - -
100 101 5x5.5 6.3x5.5 - - - -
