6
A V9155
Electrical Characteristics at 5V
Absolute Maximum Ratings
VDD referenced to GND . . . . . . . . . . . . . . . . . . . . . . 7V
Voltage on I/O pins referenced to GND. . . . . . . . . . . GND -0.5V to VDD +0.5V
Operating temperature under bias. . . . . . . . . . . . . . . . 0°C to +70°C
Power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 Watts
Storage temperature . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +150°C
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or any other conditions above those indicated in the operational
sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
product reliability.
VDD = 4.0 to 5.5V (5V +10%/-20%); TA=0°C to 70°C unless otherwise stated
Notes:
1 All clocks on AV9155-xx running at highest possible frequencies. Power supply current can change substantially with different
mask configurations. Consult ICS.
PARAMETER SYMBOL TEST CONDiTIONS MIN TYP MAX UNITS
Input Low Voltage VIL VDD=5V 0.8 V
Input High Voltage VIH VDD=5V 2.0 V
Input Low Current ILL VIN=0V -1 5uA µA
Inpu t Hig h Cu rrent IIH VIN=VDD 5µA
Output Low Voltage VOL IOL=4mA 0.4 V
Output High Voltage VOH IOH=-lnlA, VDD=5.OV VDD-.4V V
Output High Voltage VOH IOH=-4nIA, VDD=5.OV VDD-.8V V
Output High Voltage VOH I H=-8mA 2.4 V
Supply Current Icc No load140 80 mA
Supply Current, Po wer -Down I CDSTBY No load 0.7 1.5 mA
Output Frequency Changeover
Supply and Temperature FDWith respect to typical frequency 0.002 0.01 %
Short cir cuit current Isc Each out
ut clock 25 40 mA
Pull-u
resistor value R
u680k
Ω
Input Capacitance CiExcept Xl, X2 10 p
Load Ca
acitance CL Pins Xl, X2 2 0
Out
ut Rise time, 0.8 to 2.0V tr 25
F load - 1 2 ns
Rise time, 20% to 80% VDD tr 25
F load - 2 4 ns
Out
ut Fa ll time, 2.0 to 0.8V tr 25
F load - 1 2 ns
Fall time, 80% to 20% VDD t
25
F load - 2 4 ns
Dut
c
cle dt 25
F load 40/60 48/52 60/40 %
Dut
c
cle, reference clocks dt 25
F load 40/60 43/57 60/40 %
Jitter, one sigma fji1s As compared with cloc k period 0.8 2.5 %
Jitter, absolute tjab 16-100 MHz clocks 2 5 %
Jitter, absolute tjab 700 ps
In
ut Fre
uenc
fi 14.318 MHz
Clock skew between CPUand
2XCPU out
uts Tsk 0.5 1 ns
Frequency Transition time tft From 8 to 100 MHz 15 20 ms
D C C haracteristics
A C C haracteristics