PG2422TK Data Sheet GaAs Integrated Circuit SPDT Switch for 0.05 GHz to 6.0 GHz R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 DESCRIPTION The PG2422TK is a GaAs MMIC SPDT (Single Pole Double Throw) switch which was designed for 0.05 GHz to 6.0 GHz applications, including dual-band wireless LAN. This device operates with dual control switching voltages of 1.8 to 5.3 V and can operate at frequencies from 0.05 GHz to 6.0 GHz, having the low insertion loss and high isolation. This device is housed in a 6-pin lead-less minimold package (1511 PKG) and is suitable for high-density surface mounting. FEATURES Switch control voltage : Vcont (H) = 3.0 V TYP. : Vcont (L) = 0 V TYP. Low insertion loss : Lins = 0.35 dB TYP. @ f = 2.5 GHz : Lins = 0.55 dB TYP. @ f = 6.0 GHz High isolation : ISL = 28 dB TYP. @ f = 2.5 GHz : ISL = 24 dB TYP. @ f = 6.0 GHz Handling power : Pin (0.1 dB) = +28 dBm TYP. @ f = 2.0 to 6.0 GHz High-density surface mounting : 6-pin lead-less minimold package (1.5 1.1 0.55 mm) APPLICATIONS Wireless LAN (IEEE802.11a/b/g/n), etc. ORDERING INFORMATION Part Number PG2422TK-E2 Order Number PG2422TK-E2-A Package Marking Supplying Form 6-pin lead-less G6J Embossed tape 8 mm wide minimold Pin 1, 6 face the perforation side of the tape (1511 PKG) Qty 5 kpcs/reel (Pb-Free) Remark To order evaluation samples, please contact your nearby sales office. Part number for sample order: PG2422TK-A CAUTION Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 1 of 15 PG2422TK PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM Pin No. 1 2 3 4 5 6 Pin Name RF1 GND RF2 Vcont2 RFC Vcont1 SW TRUTH TABLE ON Path RFC-RF1 RFC-RF2 Vcont1 High Low Vcont2 Low High ABSOLUTE MAXIMUM RATINGS (T A = +25C, unless otherwise specified) Parameter Switch Control Voltage Input Power (Vcont (H) = 1.8 V) Input Power (Vcont (H) = 3.0 V) Input Power (Vcont (H) = 5.0 V) Symbol Vcont Pin Pin Pin Ratings Note +6.0 +29.0 +32.0 +33.0 Unit V dBm dBm dBm PD TA Tstg 150 45 to +85 55 to +150 mW C C Power Dissipation (average) Operating Ambient Temperature Storage Temperature Note: Vcont1 Vcont2 6.0 V RECOMMENDED OPERATING RANGE (T A = +25C, unless otherwise specified) Parameter Operating Frequency Switch Control Voltage (H) Switch Control Voltage (L) Symbol f Vcont (H) Vcont (L) MIN. 0.05 1.8 0.2 TYP. 3.0 0 MAX. 6.0 5.3 0.2 Unit GHz V V Control Voltage Difference Vcont (H), Vcont (L) 0.1 0 0.1 V Note Note: Vcont (H) = Vcont1 (H) Vcont2 (H) Vcont (L) = Vcont1 (L) Vcont2 (L) R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 2 of 15 PG2422TK ELECTRICAL CHARACTERISTICS 1 (TA = +25C, Vcont (H) = 3.0 V, Vcont (L) = 0 V, Z O = 50 , DC blocking capacitors = 8 pF, unless otherwise specified) Parameter Insertion Loss 1 Insertion Loss 2 Insertion Loss 3 Insertion Loss 4 Insertion Loss 5 Isolation 1 (RFC-OFF Port) Isolation 2 (RFC-OFF Port) Isolation 3 (RFC-OFF Port) Isolation 4 (RFC-OFF Port) Isolation 5 (RFC-OFF Port) Isolation 6 (RF1-RF2) Isolation 7 (RF1-RF2) Symbol Lins1 Lins2 Lins3 Lins4 Lins5 ISL1 ISL2 ISL3 ISL4 ISL5 ISL6 ISL7 Test Conditions f f f f f f f f f f f f Note 1 = 0.05 to 0.5 GHz Note 2 = 0.5 to 2.0 GHz = 2.0 to 2.5 GHz = 2.5 to 3.8 GHz = 3.8 to 6.0 GHz Note 1 = 0.05 to 0.5 GHz Note 2 = 0.5 to 2.0 GHz = 2.0 to 2.5 GHz = 2.5 to 3.8 GHz = 3.8 to 6.0 GHz Note 1 = 0.05 to 0.5 GHz Note 2 = 0.5 to 2.0 GHz MIN. TYP. MAX. Unit 25 25 25 20 25 0.30 0.30 0.35 0.45 0.55 35 28 28 28 24 35 28 0.50 0.55 0.65 0.75 dB dB dB dB dB dB dB dB dB dB dB dB f = 2.0 to 2.5 GHz 25 28 dB f = 2.5 to 3.8 GHz 25 28 dB f = 3.8 to 6.0 GHz 25 28 dB Note 1 f = 0.05 to 0.5 GHz 25 dB Note 2 f = 0.5 to 2.0 GHz 15 20 dB f = 2.0 to 2.5 GHz 15 20 dB f = 2.5 to 6.0 GHz 10 15 dB Note 1 f = 0.05 to 0.5 GHz 28 dBm Note 2 f = 0.5 to 2.0 GHz 29 dBm f = 2.0 to 6.0 GHz 28 dBm Note 1 f = 0.05 to 0.5 GHz , Vcont (H) = 5.0 V 32 dBm Note 2 f = 0.5 to 2.0 GHz , Vcont (H) = 5.0 V 32 dBm f = 2.0 to 6.0 GHz, Vcont (H) = 5.0 V 32 dBm Note 1 1 dB Loss Compression Pin (1 dB) f = 0.05 to 0.5 GHz 32 dBm Note 4 Note 2 Input Power f = 0.5 to 2.0 GHz 32 dBm f = 2.0 to 6.0 GHz 31 dBm Input 3rd Order Intercept Point IIP3 f = 2.5 GHz, Pin = +20 dBm 57 dBm 2nd Harmonics 2f0 f = 2.5 GHz, Pin = +20 dBm 80 dBc 3rd Harmonics 3f0 f = 2.5 GHz, Pin = +20 dBm 80 dBc Switch Control Current Icont No RF input 0.1 5 A Switch Control Speed tSW 50% CTL to 90/10% RF 40 100 ns Notes 1. DC blocking capacitors = 1 000 pF at f = 0.05 to 0.5 GHz 2. DC blocking capacitors = 56 pF at f = 0.5 to 2.0 GHz 3. Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of the linear range. 4. Pin (1 dB) is the measured input power level when the insertion loss increases 1 dB more than that of the linear range. Isolation 8 (RF1-RF2) Isolation 9 (RF1-RF2) Isolation 10 (RF1-RF2) Return Loss 1 Return Loss 2 Return Loss 3 Return Loss 4 0.1 dB Loss Compression Note 3 Input Power ISL8 ISL9 ISL10 RL1 RL2 RL3 RL4 Pin (0.1 dB) CAUTION It is necessary to use DC blocking capacitors with this device. The value of DC blocking capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with actual board of your system. R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 3 of 15 PG2422TK ELECTRICAL CHARACTERISTICS 2 (TA = +25C, Vcont (H) = 1.8 V, Vcont (L) = 0 V, Z O = 50 , DC blocking capacitors = 8 pF, unless otherwise specified) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Note 1 f = 0.05 to 0.5 GHz 0.30 dB Note 2 f = 0.5 to 2.0 GHz 0.30 0.55 dB f = 2.0 to 2.5 GHz 0.35 0.60 dB f = 2.5 to 3.8 GHz 0.45 0.70 dB f = 3.8 to 6.0 GHz 0.55 0.80 dB Note 1 f = 0.05 to 0.5 GHz 35 dB Note 2 f = 0.5 to 2.0 GHz 24 28 dB f = 2.0 to 2.5 GHz 24 28 dB f = 2.5 to 3.8 GHz 24 28 dB f = 3.8 to 6.0 GHz 19 24 dB Note 1 f = 0.05 to 0.5 GHz 35 dB Note 2 f = 0.5 to 2.0 GHz 24 28 dB f = 2.0 to 2.5 GHz 24 28 dB f = 2.5 to 3.8 GHz 24 28 dB f = 3.8 to 6.0 GHz 24 28 dB Note 1 f = 0.05 to 0.5 GHz 25 dB Note 2 f = 0.5 to 2.0 GHz 15 20 dB f = 2.0 to 2.5 GHz 15 20 dB f = 2.5 to 6.0 GHz 10 15 dB Note 1 f = 0.05 to 0.5 GHz 22 dBm Note 2 f = 0.5 to 2.0 GHz 22 dBm f = 2.0 to 6.0 GHz 21 dBm Note 1 1 dB Loss Compression Pin (1 dB) f = 0.05 to 0.5 GHz 28 dBm Note 4 Note 2 Input Power f = 0.5 to 2.0 GHz 27 dBm f = 2.0 to 6.0 GHz 24 dBm 2nd Harmonics 2f0 f = 2.5 GHz, Pin = +15 dBm 80 dBc 3rd Harmonics 3f0 f = 2.5 GHz, Pin = +15 dBm 80 dBc Switch Control Current Icont No RF input 0.1 5 A Switch Control Speed tSW 50% CTL to 90/10% RF 60 150 ns Notes 1. DC blocking capacitors = 1 000 pF at f = 0.05 to 0.5 GHz 2. DC blocking capacitors = 56 pF at f = 0.5 to 2.0 GHz 3. Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of the linear range. 4. Pin (1 dB) is the measured input power level when the insertion loss increases 1 dB more than that of the linear range. Insertion Loss 1 Insertion Loss 2 Insertion Loss 3 Insertion Loss 4 Insertion Loss 5 Isolation 1 (RFC-OFF Port) Isolation 2 (RFC-OFF Port) Isolation 3 (RFC-OFF Port) Isolation 4 (RFC-OFF Port) Isolation 5 (RFC-OFF Port) Isolation 6 (RF1-RF2) Isolation 7 (RF1-RF2) Isolation 8 (RF1-RF2) Isolation 9 (RF1-RF2) Isolation 10 (RF1-RF2) Return Loss 1 Return Loss 2 Return Loss 3 Return Loss 4 0.1 dB Loss Compression Note 3 Input Power Lins1 Lins2 Lins3 Lins4 Lins5 ISL1 ISL2 ISL3 ISL4 ISL5 ISL6 ISL7 ISL8 ISL9 ISL10 RL1 RL2 RL3 RL4 Pin (0.1 dB) CAUTION It is necessary to use DC blocking capacitors with this device. The value of DC blocking capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with actual board of your system. R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 4 of 15 PG2422TK EVALUATION CIRCUIT Note C1 : 0.05 to 0.5 GHz : 0.5 to 2.0 GHz : 2.0 to 6.0 GHz C2 : 1 000 pF 1 000 pF 56 pF 8 pF The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. APPLICATION INFORMATION C1 are DC blocking capacitors external to the device. The value may be tailored to provide specific electrical responses. The RF ground connections should be kept as short as possible and connected to directly to a good RF ground for best performance. LESD provides a means to increase the ESD protection on a specific RF port, typically the port attached to the antenna. R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 5 of 15 PG2422TK TYPICAL CHARACTERISTICS (TA = +25C, Vcont (H) = 3.0 V, Vcont (L) = 0 V, Z O = 50 , DC blocking capacitors = 8 pF, unless otherwise specified) Remark The graphs indicate nominal characteristics. R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 6 of 15 PG2422TK Remark The graphs indicate nominal characteristics. R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 7 of 15 PG2422TK TYPICAL CHARACTERISTICS (TA = 45 to +85C, Vcont (H) = 3.0 V, Vcont (L) = 0 V, ZO = 50 , DC blocking capacitors = 8 pF, unless otherwise specified) Remark The graphs indicate nominal characteristics. R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 8 of 15 PG2422TK Remark The graphs indicate nominal characteristics. R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 9 of 15 PG2422TK TYPICAL CHARACTERISTICS (Vcont (H) = 3.0 V, Vcont (L) = 0 V, ZO = 50 , DC blocking capacitors = 56 pF, unless otherwise specified) Remark The graphs indicate nominal characteristics. R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 10 of 15 PG2422TK TYPICAL CHARACTERISTICS (Vcont (H) = 3.0 V, Vcont (L) = 0 V, ZO = 50 , DC blocking capacitors = 1 000 pF, unless otherwise specified) Remark The graphs indicate nominal characteristics. R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 11 of 15 PG2422TK MOUNTING PAD LAYOUT DIMENSIONS 6-PIN LEAD-LESS MINIMOLD (1511 PKG) (UNIT: mm) Remark The mounting pad layout in this document is for reference only. R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 12 of 15 PG2422TK PACKAGE DIMENSIONS 6-PIN LEAD-LESS MINIMOLD (1511 PKG) (UNIT: mm) R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 13 of 15 PG2422TK RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Wave Soldering Partial Heating Soldering Conditions Peak temperature (package surface temperature) : 260C or below Time at peak temperature : 10 seconds or less Time at temperature of 220C or higher : 60 seconds or less Preheating time at 120 to 180C : 12030 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Peak temperature (molten solder temperature) : 260C or below Time at peak temperature : 10 seconds or less Preheating temperature (package surface temperature) : 120C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Condition Symbol IR260 Peak temperature (terminal temperature) : 350C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below HS350 WS260 CAUTION Do not use different soldering methods together (except for partial heating). R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 14 of 15 PG2422TK Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. R09DS0013EJ0100 Rev.1.00 Jan 20, 2011 Page 15 of 15 PG2422TK Data Sheet Revision History Rev. 1.00 Date Jan 20, 2011 Page Description Summary First edition issued All trademarks and registered trademarks are the property of their respective owners. C-1