Major ratings and characteristics
Values Units
10 A
100 V
0.64 V, typ
-65 to 150 ℃
ELECTRICAL: MECHANICAL:
* Ultra-Low Forward Voltage Drop * Molded Plastic TO-220AB, TO-262, TO-263, and
* Reliable High Temperature Operation ITO-220 packages
* Super Barrier Design
* Softest, fast switching capability
* 150OC Operating Junction Temperature
www.apdsemi.com Version 1.0 -
A
ugust 2006 1
SBR10100CTB
Using state-of-the-art SBR IC process technology,
the following features are made possible in a single device:
Case Styles
Device optimized for ultra-low forward
voltage drop to maximize efficiency in
Power Supply applications
SBR10100CT SBR10100CTF SBR10100CTI
SBR10100CT
VRRM
SBR10100CTF
SBR10100CTI
Characteristics
IF(AV) Rectangular Waveform
VF@5A, Tj=125℃
Tj(operating/storage)
TO-220AB ITO-220 TO-262 TO-263
SBR10100CTB
_
______________________________________________________________________________________________
_
13
2
Anode
Common
Cathode Anode
13
2
Anode
Common
Cathode Anode
13
2
Anode
Common
Cathode Anode 13
2
Anode
Common
Cathode Anode
SYMBOL UNITS
VRM
VRWM
VRRM
Volts
IOAmps
IFSM Amps
IRRM Amps
VF *Volts
IRmA
dv/dt V/uS
RθJC OC/W
TJOC
* Pulse width < 300 uS, Duty cycle < 2%
http://www.apdsemi.com Version 1.0 - August 2006 2
_
______________________________________________________________________________________________
_
Max
0.2
25
Maximum Instantaneous Reverse Current at
Rated VRM
TJ = 25OC
TJ = 125OC
Typ
---
---
-65 to +150
2
4
10,000
Operating and Storage Junction Temperature
Maximum Rate of Voltage Change
(at Rated VR)
Maximum Thermal Resistance JC (per leg)
Package = TO-220AB, TO-262, & TO-263
Package = ITO-220
Peak Repetitive Reverse Surge Current
(2uS-1Khz)
SBR10100CTB
DC Blocking Voltage
Working Peak Reverse Voltage
Peak Repetitive Reverse Voltage 100
SBR10100CT
Average Rectified Forward Current
(Rated VR-20Khz Square Wave) - 50% duty
cycle
SBR10100CTF
SBR10100CTI
Maximum Ratings and Electrical Characteristics
(at 25OC unless otherwise specified)
Typ
---
---
Instantaneous Forward Voltage (per leg)
IF = 5A; TJ = 25OC
IF = 5A; TJ= 125OC
10
Max
0.80
0.71
120
2
Peak Forward Surge Current - 1/2 60hz
www.apdsemi.com Version 1.0 -
A
ugust 2006 3
SBR10100CTI
_
______________________________________________________________________________________________
_
SBR10100CT
SBR10100CTF
Figure 3: Current Derating, Case (per leg)
Figure 1: Typical Reverse Current (per leg) Figure 2: Typical Forward Voltage (per leg)
SBR10100CTB
0
1
2
3
4
5
0 25 50 75 100 125 150
Tc, Case Temp (C)
If, Average For w ar d Curr ent ( Amps)
0.1
1.0
10.0
100.0
1000.0
10 20 30 40 50 60 70 80 90 100 110
Vr, Reverse Voltage (Volts)
Ir, R everse Curren t (u A )
Tj=25C
Tj=100C
Tj=125C
Tj=75C
1
10
100
400 500 600 700 800 900 1000 1100
Vf, Instantaneous Forward Voltage (mV)
If, Instantaneous Forward Current (Amps)
Tj=125C
Tj=100C
Tj=25C
Tj=75C
APD SEMICONDUCTOR reserves the right to make changes without further notice to any products herein. APD SEMICONDUCTOR makes no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does APD SEMICONDUCTOR assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APD SEMICONDUCTOR data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APD SEMICONDUCTOR does not convey any license
under its patent rights nor the rights of others. APD SEMICONDUCTOR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the APD SEMICONDUCTOR product could create a situation where personal injury or death may occur. Should Buyer
purchase or use APD SEMICONDUCTOR products for any such unintended or unauthorized application, Buyer shall indemnify and hold APD SEMICONDUCTOR and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or
unauthorized use, even if such claim alleges that APD SEMICONDUCTOR was negligent regarding the design or manufacture of the part..
1 Lagoon Drive, Suite 410, Redwood City, CA 94065, USA
Ph: 650 508 8896 FAX: 650 508 8865
Homepage: www.apdsemi.com
email: info@apdsemi.com
