Switches & Pilot Devices Signaling Lights Switches & Pilot Devices Miniature o8-16mm AP Series AP Series -- Miniature Pilot Lights Key features: * * * * * * Long service life, low maintenance Space saving miniature style Dome or flat lens models Built-in current-limiting resistor Five illumination colors: red, green, amber, yellow, and white Transformer (120V AC and 240V AC) and DC-DC Converter (110V DC) options on 12mm and 16mm units Relays & Sockets Timers Contactors * CSA Certified File No. LR21451 UL Recognized File No. E55996 *AP8/AP1 series only. Specifications Lamp Built-in LED with current limiting resistor Operational Voltage 5, 6, 12, 24VDC (full voltage), 110/120, 220/240VAC, (with transformer) 110VDC (with converter) Current Ratings AP8: 5V DC/9mA, 12V DC/9mA, 24V DC/9mA, 12V AC/15mA, 24V AC/15mA AP1: 5V DC/9mA, 12V DC/9mA, 24V DC/9mA, 12V AC/15mA, 24V AC/15mA AP2: 6V DC/33mA, 12V DC/22mA, 24V DC/11mA AP6: 6V DC/33mA, 12V DC/22mA, 24V DC/11mA Operating Temp. -20C to +55C Operating Humidity 45 to 85% RH Insul. Resistance 100M min. (500V DC megger) Between live and dead parts Rev. Withstand Voltage AP2/AP6: 100V AP1/AP8: 200V Solder Terminal Soldering 260C maximum (5 sec.) Degree of Protection AP8: IP40 (dustproof) Other Series: IP65 (oiltight) Optional Adaptors/Converters Transformer Model Terminal Blocks Applicable Units Operating Voltage DC-DC Converter AP2 & AP6 (with 6V LED only) 110/120VAC 50/60 Hz 220/240VAC 50/60 Hz 110V DC (90 to 140V DC) Power Consumption 1.6 VA maximum 1W maximum Insulation Voltage 250 V AC 140V DC Insulation Resistance Dielectric Strength 10M min. (500V DC megger) Between live and dead parts 2,000V AC, 1 minute Between live/dead parts 2,000V AC, 1 minute Between terminals 2,000V AC, 1 minute Between live/dead parts 1,500V AC, 1 minute Between terminals Circuit Breakers Available as one piece only (replacement LEDs are not available). 452 www.IDEC.com Switches & Pilot Devices Miniature o8-16mm AP Series Switches & Pilot Devices Miniature Pilot Lights AP Miniature Pilot Lights - o8 & o10mm Style Lens Style Operating Voltage Part Numbers Dome 5V DC +/- 5% 12V AC/DC +/- 10% 24V AC/DC +/- 10% AP8M255-k AP8M211-k AP8M222-k AP8 Series - O8mm Flat AP1 Series - O10mm Flat AP8M155-k AP8M111-k AP8M122-k 5V DC +/- 5% 12V AC/DC +/- 10% 24V AC/DC +/- 10% AP1M255-k AP1M211-k AP1M222-k 5V DC +/- 5% 12V AC/DC +/- 10% 24V AC/DC +/- 10% AP1M155-k AP1M111-k AP1M122-k Color Code Amber A Green G Red R Blue S* Warm White W Cool White PW Yellow Y Signaling Lights Dome 5V DC +/- 5% 12V AC/DC +/- 10% 24V AC/DC +/- 10% k Color Codes * Available in only the AP8 and AP1 series. 1. In place of k, specify the color code. 2. For dimensions, see page 455. 3. For accessories, see page 454. Relays & Sockets AP Miniature Pilot Lights - o12 & o16mm Style Operating Voltage Part Numbers Dome 6V DC +/- 5% 12V DC +/- 10% 24V DC +/- 10% AP2M266-k AP2M211-k AP2M222-k Flat 6V DC +/- 5% 12V DC +/- 10% 24V DC +/- 10% AP2M166-k AP2M111-k AP2M122-k 6V DC +/- 5% 12V DC +/- 10% 24V DC +/- 10% AP6M266-k AP6M211-k AP6M222-k 6V DC +/- 5% 12V DC +/- 10% 24V DC +/- 10% AP6M166-k AP6M111-k AP6M122-k AP2 Series - O12mm Dome AP6 Series - O16mm Flat k Color Codes Color Code Amber A Green G Red R Warm White W Yellow Y Timers Lens Style Contactors 1. In place of k, specify the color code. 2. For dimensions, see page 455. 3. For accessories, see page 454. Optional Transformers and DC-DC Converters (for AP2 and AP6 only) Style Voltage Part Numbers Used with AP2 Series Used with AP6 Series 110/120V AC 220/240V AC AP2-0126D AP2-0246D AP6-0126D AP6-0246D DC-DC Converter 110V DC (90-140V DC) AP2-016DD AP6-016DD Terminal Blocks Transformer 800-262-IDEC (4332) * USA & Canada Circuit Breakers 1. Optional Transformers and DC-DC converters snap onto the back of AP2 or AP6 pilot lights. 2. Transformers and DC-DC Converters step down to 6V. 3. For dimensions, see page 455. 453 Switches & Pilot Devices Relays & Sockets Signaling Lights Switches & Pilot Devices Miniature o8-16mm AP Series Accessories -- AP Series Item Appearance Description Made of metal. Used for tightening plastic locking ring during installation. Tightening torque should not exceed 3kgf-cm Locking Ring Wrench Mounting Hole Plug Made of rubber. Fills unused mounting holes to provide IP65 protection Transformer Removal Tool Replacement Lenses Lenses (included with all units). 1. In place of k, specify the Lens Color Code. 2. Internal LED is fixed and cannot be removed or replaced. Color Code Amber A Green G Red R Blue S* White W Yellow Y *Blue available in AP8/AP1 series only. Circuit Breakers Terminal Blocks Contactors Timers k Lens Color Codes 454 www.IDEC.com Used With Part Number O 16mm units MT-001 O 12mm units MT-002 O 10mm units MT-003 O 8mm units MT-004 Unused 8mm panel cutouts AL-B8 Unused 10mm panel cutouts AL-B1 Unused 12mm panel cutouts AL-B2 Unused 16mm panel cutouts AL-B6 AP2 and AP6 snap on transformer and DC-DC converter MT-100 AP1M Flat AP1M-L1-k AP1M Dome AP1M-L2-k AP2M Flat AP2M-L1-k AP2M Dome AP2M-L2-k AP6M Flat AP6M-L1-k AP6M Dome AP6M-L2-k Switches & Pilot Devices Miniature o8-16mm AP Series Switches & Pilot Devices Dimensions -- AP Series Pilot Lights (AP Series) AP8 Style AP1 Flat Panel Cut-out Dome Flat AP2 Dome O 0.319" (+0.0118, -0) 8.1mm (+0.3, -0) O 0.398" (+0.0118, -0) 10.1mm (+0.3, -0) O 0.386" (9.8mm) O 0.472" (12mm) Outside Dimension Flat Dome Flat O 0.480" (+0.0118, -0) 12.2mm (+0.3, -0) O 0.551" (14mm) w/ Adaptor or Converter Dome O 0.638" (+0.0118, -0) 16.2mm (+0.3, -0) O 0.709" (18mm) 0.709" (18mm) 0.709" (18mm) Signaling Lights AP6 AP6 w/ Adaptor or Converter AP2 Panel Thickness: 0.8 to 6 mm 7 11.5 Panel Cut-out Flat 29.5 o15.6 .2 +0 0 2 5.5 9.5 When using the Transformer unit (When using the DC-DC converter unit) 9.5 M3 terminal screw Transformer unit (or DC-DC converter unit) M3 terminal screw + Terminal 18 X2 X1 TOP X2 71 1.3 Timers 58.7 18 71 1.3 18 58.7 + Terminal 18 TOP Transformer unit (or DC-DC converter unit) .2 0 +0 2 2. o1 5.5 X1 o1 o12 o14 Panel Cut-out 6. When using the Transformer unit (When using the DC-DC converter unit) 29.5 Relays & Sockets 8 21.5 21.5 5.5 - 13.5 o18 5 + 5.5 Flat 1.5 2.2 o12 1.5 o14 2.2 o15.6 o18 Dome Gasket Dome Gasket - + Panel Thickness: 0.8 to 6 mm - Terminal - Terminal AP1 AP8 2.2 1.5 Panel Thickness: 0.8 to 6 mm Panel Thickness: 0.8 to 6 mm 2.8 3 o8 + 8 5.5 29.5 9.5 8 29.5 Panel Cut-out o1 +0 0 .2 5.5 .1 0. 1 +0 . 0 2 o10 o9.8 Flat Terminal Blocks 5.5 21.5 o8 Panel Cut-out Flat o12 o9.8 - 21.5 o8 2.8 4 o10 o12 5.5 10 Gasket Dome Contactors Gasket Dome 1.5 2.2 8.5 9.5 Circuit Breakers 800-262-IDEC (4332) * USA & Canada 455