TPS22921, TPS22922, TPS22922B www.ti.com........................................................................................................................................ SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008 LOW INPUT VOLTAGE, ULTRA-LOW rON LOAD SWITCHES FEATURES APPLICATIONS * * * * * * * * * 1 * * * * * * * Input Voltage: 0.9 V to 3.6 V Ultra-Low ON Resistance - rON = 14 m at VIN = 3.6 V - rON = 20 m at VIN = 2.5 V - rON = 33 m at VIN = 1.8 V - rON = 67 m at VIN = 1.2 V - rON = 116 m at VIN = 1.0 V 2-A Maximum Continuous Switch Current Ultra-Low Quiescent Current: 78 nA at 1.8 V Ultra-Low Shutdown Current: 35 nA at 1.8 V Low Threshold Control Input Enable the use of 1.2V/1.8V/2.5V/3.3V Logic Controlled Slew Rate to Avoid Inrush Currents - TPS22921 and TPS22922: 30 S - TPS22922B: 200 S ESD Performance Tested Per JESD 22 - 3000-V Human-Body Model (A114-B, Class II) - 1000-V Charged-Device Model (C101) Six Terminal Wafer-Chip-Scale Package - 0.9 mm x 1.4 mm, 0.5 mm Pitch, 0.5 mm Height - 0.8 mm x 1.2 mm, 0.4 mm Pitch, 0.5 mm Height PDAs Cell Phones GPS Devices MP3 Players Peripheral Ports Portable Media Players RF Modules DESCRIPTION TPS22921, TPS22922, and TPS22922B are ultra-low rON load switches with controlled turn on. TPS22921/2/2B contain an ultra-low rON P-channel MOSFET that can operate over an input voltage range of 0.9 V to 3.6 V. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage control signals. In TPS22922 and in TPS22922B, a 120- on-chip load resistor is added for output quick discharge when switch is turned off. The rise time (slew rate) of the device is internally controlled in order to avoid inrush current: TPS22921 and TPS22922 feature a 30 s rise time whereas TPS22922B is 200 s. TPS22921, TPS22922, and TPS22922B feature ultra low quiescent and shutdown current and are available in space-saving 6-terminals wafer-chip-scale packages (WCSP: YZP with 0.5-mm pitch and YFP with 0.4-mm pitch) which make it ideal for portable electronics. The devices are characterized for operation over the free-air temperature range of -40C to 85C. YFP, YZP, AND YZT PACKAGES TERMINAL ASSIGNMENTS C C C B B B VIN VOUT A A VIN VOUT 2 1 A 2 1 Laser Marking View GND 1 2 Bump View rON AT 1.8 V (TYP) SLEW RATE (TYP at 1.8V) TPS22921 33 m 30 s TPS22922 33 m 30 s TPS22922B 33 m 200 s (1) ON QUICK OUTPUT DISCHARGE (1) MAX OUTPUT CURRENT ENABLE 2A active high Yes 2A active high Yes 2A active high This feature discharges the output of the switch to ground through a 120- resistor, preventing the output from floating. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2008, Texas Instruments Incorporated TPS22921, TPS22922, TPS22922B SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008........................................................................................................................................ www.ti.com ORDERING INFORMATION TA PACKAGE WCSP - YFP (0.4 mm pitch) -40C to 85C ORDERABLE PART NUMBER Tape and reel WCSP - YZP (0.5 mm pitch) Tape and reel WCSP - YZT (0.5 mm pitch) (1) (2) (1) (2) Tape and reel TOP-SIDE MARKING TPS22921YFPR _ _ _3Y_ TPS22922YFPR _ _ _2Z_ TPS22922BYFPR PREVIEW TPS22921YZPR _ _ _3Y_ TPS22922YZPR _ _ _2Z_ TPS22922BYZPR _ _ _3Z_ TPS22921YZTR _ _ _3Y_ Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. TYPICAL APPLICATION VBATT VIN SMPS ON (see Note A) CIN = 1 F CL VOUT LOAD TPS22921/22/22B CL RL OFF GND GND GND A. 2 Switched mode power supply Submit Documentation Feedback Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): TPS22921 TPS22922 TPS22922B TPS22921, TPS22922, TPS22922B www.ti.com........................................................................................................................................ SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008 APPLICATION BLOCK DIAGRAM A2, B2 VIN Turn-On Slew Rate Controlled Driver ON Control Logic C2 ESD Protection A1, B1 VOUT Output Discharge (TPS22922/TPS22922B Only) C1 GND Figure 1. Functional Block Diagram FUNCTION TABLE (1) VOUT TO GND (1) ON VIN TO VOUT L OFF ON H ON OFF TPS22922/TPS22922B only TERMINAL FUNCTIONS TERMINAL NO. NAME A1, B1 VOUT A2, B2 VIN C1 GND C2 ON DESCRIPTION Switch output Switch input Ground Switch control input, active high. Do not leave floating Copyright (c) 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TPS22921 TPS22922 TPS22922B 3 TPS22921, TPS22922, TPS22922B SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008........................................................................................................................................ www.ti.com ABSOLUTE MAXIMUM RATINGS (1) MIN VIN Input voltage range VOUT Output voltage range VON Input voltage range P Power dissipation at TA = 25C IMAX Maximum continuous switch current TA Operating free-air temperature range Tstg Storage temperature range Tlead Maximum lead temperature (10-s soldering time) ESD MAX -0.3 4 V VIN + 0.3 V 4 V 0.645 W -0.3 Electrostatic discharge protection 2 A -40 85 C -65 150 C 300 C Human-Body Model (HBM) 3000 Charged Device Model (CDM) 1000 Machine Model (MM) (1) UNIT V 300 Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. THERMAL IMPEDANCE RATINGS UNIT JA (1) Package thermal impedance (1) YFP package 155 YZP/YZT package 123 C/W The package thermal impedance is calculated in accordance with JESD 51-7. RECOMMENDED OPERATING CONDITIONS MIN VIN Input voltage range VOUT Output voltage range VIH High-level input voltage, ON VIL Low-level input voltage, ON CIN Input capacitor (1) 4 0.9 MAX 3.6 UNIT V VIN 0.85 3.6 0.4 1 (1) V V F Refer to Application Information. Submit Documentation Feedback Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): TPS22921 TPS22922 TPS22922B TPS22921, TPS22922, TPS22922B www.ti.com........................................................................................................................................ SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008 ELECTRICAL CHARACTERISTICS VIN = 0.9 V to 3.6 V, TA = -40C to 85C (unless otherwise noted) PARAMETER IIN TEST CONDITIONS Quiescent current OFF-state supply current IIN(OFF) IIN(LEAKAGE) OFF-state switch current IOUT = 0 VON = GND, OUT = Open VON = GND, VOUT = 0 TA VIN = 1-V Full 30 120 VIN = 1.8-V Full 78 235 VIN = 3.6-V Full 200 880 VIN = 1-V Full 10 210 VIN = 1.8-V Full 35 260 VIN = 3.6-V Full 120 700 VIN = 1-V Full 12 140 VIN = 1.8-V Full 50 230 Full 130 610 25C 14 45 VIN = 3.6-V VIN = 3.6 V Full ON-state resistance rPD VIN = 3.3 V, VON = 0, IOUT = 30 mA (TPS22922/TPS22922B only) ION ON input leakage current VON = 1.1 V to 3.6 V or GND (1) 67 Full 100 m 120 25C 82 Full 150 160 25C VIN = 1.0 V nA 65 75 25C VIN = 1.1 V nA 60 33 Full VIN = 1.2 V nA 55 Full IOUT = -200 mA, Output pulldown resistance 20 25C VIN = 1.8 V UNIT 50 25C VIN = 2.5 V rON MIN TYP (1) MAX 116 Full 160 170 25C 65 120 25 nA Full Typical values are at the specified VIN and TA = 25C. SWITCHING CHARACTERISTICS VIN = 0.9 V, TA = 25C (unless otherwise noted) PARAMETER tON Turn-ON time TEST CONDITIONS RL = 500 , tr tf (1) Turn-OFF time VOUT rise time VOUT fall time RL = 500 , RL = 500 , RL = 500 , MIN TYP MAX TPS22922 (1) MIN TYP MAX TPS22922B (1) MIN TYP MAX CL = 0.1 F 121 121 638 CL = 1 F 160 160 712 CL = 3 F 188 188 799 46 40 40 CL = 1 F 308 279 279 CL = 3 F 975 807 807 CL = 0.1 F 60 60 462 CL = 1 F 85 85 465 CL = 3 F 107 107 507 CL = 0.1 F 119 51 51 CL = 1 F 969 434 434 CL = 3 F 3174 1264 1264 CL = 0.1 F tOFF TPS22921 UNIT s s s s RL_CHIP = 120 Copyright (c) 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TPS22921 TPS22922 TPS22922B 5 TPS22921, TPS22922, TPS22922B SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008........................................................................................................................................ www.ti.com SWITCHING CHARACTERISTICS VIN = 1.0 V, TA = 25C (unless otherwise noted) PARAMETER tON Turn-ON time TEST CONDITIONS RL = 500 , TPS22921 MIN tr tf (1) Turn-OFF time VOUT rise time VOUT fall time RL = 500 , RL = 500 , RL = 500 , MIN TYP MAX TPS22922B (1) MIN TYP MAX CL = 0.1 F 105 105 549 CL = 1 F 136 136 613 CL = 3 F 157 157 683 46 28 28 CL = 1 F 309 186 186 CL = 3 F 983 511 511 CL = 0.1 F 51 51 386 CL = 1 F 78 78 388 CL = 3 F 88 88 419 CL = 0.1 F tOFF TYP MAX TPS22922 (1) CL = 0.1 F 121 34 34 CL = 1 F 986 306 306 CL = 3 F 3300 908 908 UNIT s s s s RL_CHIP = 120 SWITCHING CHARACTERISTICS VIN = 1.1 V, TA = 25C (unless otherwise noted) PARAMETER TEST CONDITIONS CL = 0.1 F tON Turn-ON time RL = 500 , tr Turn-OFF time VOUT rise time RL = 500 , RL = 500 , (1) 6 VOUT fall time RL = 500 , TYP MAX MIN TYP MAX TPS22922B (1) MIN TYP MAX 91 93 484 118 118 540 CL = 3 F 137 137 599 44 21 21 CL = 1 F 311 144 144 CL = 3 F 99 383 383 CL = 0.1 F 46 46 335 CL = 1 F 60 60 336 CL = 3 F 76 76 363 CL = 0.1 F tf MIN TPS22922 (1) CL = 1 F CL = 0.1 F tOFF TPS22921 122 29 29 CL = 1 F 1000 224 224 CL = 3 F 3300 732 732 UNIT s s s s RL_CHIP = 120 Submit Documentation Feedback Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): TPS22921 TPS22922 TPS22922B TPS22921, TPS22922, TPS22922B www.ti.com........................................................................................................................................ SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008 SWITCHING CHARACTERISTICS VIN = 1.2 V, TA = 25C (unless otherwise noted) PARAMETER TEST CONDITIONS TPS22921 MIN CL = 0.1 F tON Turn-ON time RL = 500 , tr Turn-OFF time VOUT rise time RL = 500 , RL = 500 , (1) VOUT fall time RL = 500 , TYP MAX MIN TYP MAX 83 435 CL = 1 F 103 103 485 CL = 3 F 122 122 536 44 17 17 CL = 1 F 312 117 117 CL = 3 F 1000 319 319 CL = 0.1 F 41 41 301 CL = 1 F 54 54 302 CL = 3 F 67 67 325 CL = 0.1 F tf MIN TPS22922B (1) 83 CL = 0.1 F tOFF TYP MAX TPS22922 (1) 123 25 25 CL = 1 F 1000 214 214 CL = 3 F 3400 632 632 UNIT s s s s RL_CHIP = 120 SWITCHING CHARACTERISTICS VIN = 1.8 V, TA = 25C (unless otherwise noted) PARAMETER tON tOFF tr Turn-ON time Turn-OFF time VOUT rise time TEST CONDITIONS RL = 500 , RL = 500 , RL = 500 , (1) VOUT fall time RL = 500 , MIN TYP MAX TPS22922 (1) MIN TYP MAX TPS22922B (1) MIN TYP MAX CL = 0.1 F 54 54 282 CL = 1 F 67 67 314 CL = 3 F 78 78 344 CL = 0.1 F 41 10 10 CL = 1 F 312 67 67 CL = 3 F 1000 181 181 CL = 0.1 F 30 30 200 CL = 1 F 37 37 202 CL = 3 F 47 47 219 CL = 0.1 F tf TPS22921 121 17 17 CL = 1 F 1000 158 158 CL = 3 F 3450 461 461 UNIT s s s s RL_CHIP = 120 Copyright (c) 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TPS22921 TPS22922 TPS22922B 7 TPS22921, TPS22922, TPS22922B SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008........................................................................................................................................ www.ti.com SWITCHING CHARACTERISTICS VIN = 2.5 V, TA = 25C (unless otherwise noted) PARAMETER tON tOFF tr Turn-ON time Turn-OFF time VOUT rise time TEST CONDITIONS RL = 500 , RL = 500 , RL = 500 , TPS22921 MIN (1) VOUT fall time RL = 500 , MIN TYP MAX TPS22922B (1) MIN TYP MAX CL = 0.1 F 40 40 211 CL = 1 F 50 50 233 CL = 3 F 59 59 256 CL = 0.1 F 41 10 10 CL = 1 F 316 56 56 CL = 3 F 1000 153 153 CL = 0.1 F 23 23 164 CL = 1 F 29 29 165 CL = 3 F 38 38 177 CL = 0.1 F tf TYP MAX TPS22922 (1) 122 16 16 CL = 1 F 1086 147 147 CL = 3 F 3600 430 430 UNIT s s s s RL_CHIP = 120 SWITCHING CHARACTERISTICS VIN = 3 V, TA = 25C (unless otherwise noted) PARAMETER tON tOFF tr Turn-ON time Turn-OFF time VOUT rise time TEST CONDITIONS RL = 500 , RL = 500 , RL = 500 , (1) 8 VOUT fall time RL = 500 , MIN TYP MAX TPS22922 (1) MIN TYP MAX TPS22922B (1) MIN TYP MAX CL = 0.1 F 30 30 182 CL = 1 F 38 38 201 CL = 3 F 45 45 221 CL = 0.1 F 40 10 10 CL = 1 F 353 51 51 CL = 3 F 1036 139 139 CL = 0.1 F 20 20 149 CL = 1 F 25 25 150 CL = 3 F 33 33 161 CL = 0.1 F tf TPS22921 104 15 15 CL = 1 F 1030 143 143 CL = 3 F 3230 419 419 UNIT s s s s RL_CHIP = 120 Submit Documentation Feedback Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): TPS22921 TPS22922 TPS22922B TPS22921, TPS22922, TPS22922B www.ti.com........................................................................................................................................ SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008 SWITCHING CHARACTERISTICS VIN = 3.6 V, TA = 25C (unless otherwise noted) PARAMETER tON tOFF tr Turn-ON time Turn-OFF time VOUT rise time TEST CONDITIONS RL = 500 , RL = 500 , RL = 500 , (1) VOUT fall time RL = 500 , MIN TYP MAX TPS22922 (1) MIN TYP MAX TPS22922B (1) MIN TYP MAX CL = 0.1 F 30 30 159 CL = 1 F 38 38 175 CL = 3 F 45 45 193 CL = 0.1 F 42 10 10 CL = 1 F 310 51 51 CL = 3 F 988 139 139 CL = 0.1 F 20 20 137 CL = 1 F 25 25 138 CL = 3 F 33 33 148 CL = 0.1 F tf TPS22921 120 15 15 CL = 1 F 1100 143 143 CL = 3 F 3600 419 419 UNIT s s s s RL_CHIP = 120 Copyright (c) 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TPS22921 TPS22922 TPS22922B 9 TPS22921, TPS22922, TPS22922B SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008........................................................................................................................................ www.ti.com TYPICAL CHARACTERISTICS 0.45 0.024 0.40 0.023 ON-State Resistance, rON (W) ON-State Resistance, rON () 0.35 0.30 0.25 0.20 0.15 0.022 0.021 0.02 0.10 0.019 0.05 0.018 0.00 0.7 1.2 1.7 2.2 Input Voltage, VIN (V) -40.00 3.7 3.2 2.7 Figure 2. rON vs. VIN Figure 3. rON vs. Temperature (VIN = 3.3 V) 500 225 450 200 400 175 300 Quiescent Current, IIN (nA) 350 V oltag e D rop (m V ) 85.00 25.00 Temperature (C) Vdrop = 1.0 V 250 Vdrop = 1.2 V 200 Vdrop = 1.8 V 150 150 125 100. 75 Vdrop = 2.5 V 100 50 Vdrop = 3.3 V 50 25 0 0.0 0.2 0.4 0.6 0.8 1.2 1.0 1.4 1.6 1.8 2.0 0 0.5 1.0 1.5 2.0 2.5 Input Voltage, VIN (V) Load Current (A) Figure 4. Voltage Drop vs Load Current 10 Submit Documentation Feedback 3.0 3.5 4.0 Figure 5. Quiescent Current vs. VIN (VON = VIN) Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): TPS22921 TPS22922 TPS22922B TPS22921, TPS22922, TPS22922B www.ti.com........................................................................................................................................ SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008 TYPICAL CHARACTERISTICS (continued) 275 300 250 225 250 Leakage Current, IIN (nA) Quiescent Current, IIN (nA) 200 200 150 100 175 150 125 100 75 50 25 50 0 0 -40 25 85 -40 25 Temperature (C) Temperature (C) Figure 6. Quiescent Current vs. Temperature (VIN = 3.3 V, IOUT = 0 mA) Figure 7. IIN Leakage Current vs. Temperature (VIN = 3.3 V) 140 160 120 140 120 IIN OFF Current (nA) 100 Leakage Current, IIN (nA) 85 100 80 60 80 60 40 40 20 20 0 0.5 1.0 1.5 2.0 2.5 Input Voltage, VIN (V) 3.0 Figure 8. Leakage Current vs VIN Copyright (c) 2008, Texas Instruments Incorporated 3.5 4.0 0 0.5 1.0 1.5 2.0 2.5 Input Voltage, VIN (V) 3.0 3.5 4.0 Figure 9. IIN (OFF) vs VIN (VON = 0 V) Submit Documentation Feedback Product Folder Link(s): TPS22921 TPS22922 TPS22922B 11 TPS22921, TPS22922, TPS22922B SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008........................................................................................................................................ www.ti.com TYPICAL CHARACTERISTICS (continued) 4.0 275 250 3.5 225 2.5 175 VOUT (V) Quiescent Current (OFF), IIN (nA) 3.0 200 150 125 2.0 --VIN = 3.6 V --VIN = 3.3 V --VIN = 3 V --VIN = 2.5 V --VIN = 1.8 V --VIN = 1.5 V --VIN = 1.2 V --VIN = 1.1 V --VIN = 1 V --VIN = 0.9 V 1.5 100 1.0 75 0.5 50 0.0 25 0 -40 25 Temperature (C) -0.5 0.3 85 Figure 10. IIN (OFF) vs Temperature (VIN = 3.3 V) 0.4 0.5 0.6 Input Voltage, VON (V) 0.7 0.8 Figure 11. ON-Input Threshold TPS22921 130 50.0 120 47.5 110 45.0 42.5 90 TOFF 80 40.0 tr /tf (s) tON/tOFF (s) tfall 100 37.5 70 60 35.0 50 32.5 40 30 30.0 tON 20 27.5 10 25.0 -50 -40 -30 -20 -10 0 10 20 30 40 50 Temperature, TA (C) 60 70 80 90 100 Figure 12. tON/tOFF vs Temperature (VIN = 3.3 V) 12 Submit Documentation Feedback trise 0 -50 -40 -30 -20 -10 0 10 20 30 40 Temperature (C) 50 60 70 80 90 100 Figure 13. trise/tfall vs Temperature (VIN = 3.3 V) Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): TPS22921 TPS22922 TPS22922B TPS22921, TPS22922, TPS22922B www.ti.com........................................................................................................................................ SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008 TYPICAL CHARACTERISTICS (continued) TPS22922 40 50 45 35 tOFF (TPS22922) tfall (TPS22922) 40 30 25 30 trise/tfall (ms) tON/tOFF (s) 35 tON 25 20 20 trise 15 15 10 10 5 5 0 0 -40 0 25 Temperature, TA (C) 70 -40 85 Figure 14. tON/tOFF vs Temperature (VIN = 3.3 V) 0 25 70 Temperature (C) 85 Figure 15. trise/tfall vs Temperature (VIN = 3.3 V) TPS22922B 160 200 150 180 140 130 160 trise 120 tON 140 110 tr /tf (s) tON/tOFF (s) 100 120 100 80 90 80 70 60 50 60 40 40 tfall 30 20 TOFF 20 10 0 -50 -40 -30 -20 -10 0 0 10 20 30 40 50 Temperature, TA (C) 60 70 80 90 100 Figure 16. tON/tOFF vs Temperature (VIN = 3.3 V) Copyright (c) 2008, Texas Instruments Incorporated -50 -40 -30 -20 -10 0 10 20 30 40 Temperature (C) 50 60 70 80 90 100 Figure 17. trise/tfall vs Temperature (VIN = 3.3 V) Submit Documentation Feedback Product Folder Link(s): TPS22921 TPS22922 TPS22922B 13 TPS22921, TPS22922, TPS22922B SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008........................................................................................................................................ www.ti.com TYPICAL CHARACTERISTICS (continued) 0.02 ON = 1.8 V 0.01 IOUT = 6.6 mA tON= 40 s 0.00 -0.01 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 0.03 RL = 500 W VIN = 3.3 V CL = 3 F 0.01 IOUT = 6.6 mA tON = 40 s 0.00 -0.01 Figure 18. tON Response Figure 19. tON Response 1.2 1.2 RL = 500 W VIN = 1 V CL = 0.1 F 1.0 0.9 ON = 0.85 V 1.0 0.9 0.6 0.5 0.4 0.2 ON = 0.85 V IOUT = 2 mA tON = 100 s 0.6 0.5 0.4 0.3 0.2 0.1 IOUT = 2 mA tON = 145 s 0.0 0.0 0.00 -0.1 0.01 0.7 0.7 0.3 0.8 0.01 ON Input Voltage (V) ON Input Voltage (V) 0.8 RL = 500 W VIN = 1 V CL = 1 F 1.1 Output Current (A) 1.1 0.1 0.02 ON = 1.8 V Output Current (A) 0.03 RL = 500 W VIN = 3.3 V CL = 1 F ON Input Voltage (V) 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 Output Current (A) ON Input Voltage (V) TPS22921 and TPS22922 0.00 -0.1 -0.2 -0.2 -0.3 -0.3 -0.4 -0.4 Figure 20. tON Response Figure 21. tON Response 1.2 1.1 1.0 ON = 0.85 V 0.9 RL = 500 W VIN = 1 V CL = 3 F ON Input Voltage (V) 0.7 0.6 0.01 Output Current (A) 0.8 0.5 0.4 0.3 IOUT = 2 mA 0.2 0.1 tON = 160 s 0.0 0.00 -0.1 -0.2 -0.3 -0.4 Figure 22. tON Response 14 Submit Documentation Feedback Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): TPS22921 TPS22922 TPS22922B TPS22921, TPS22922, TPS22922B www.ti.com........................................................................................................................................ SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008 TYPICAL CHARACTERISTICS (continued) TPS22921 1.10 0.012 3.20 0.011 VON 0.80 0.008 0.70 0.007 0.60 0.006 0.50 0.005 0.40 0.004 IOUT 0.30 0.003 0.20 0.002 0.10 0.001 0.000 0.00 -0.10 -0.22 -200 Output Current (A) 0.009 0.90 Control Input Voltage (V) 0.010 1.00 Control Input Voltage (V) 3.50 3.40 0 20 40 60 80 100 Time (s) 120 140 -0.001 -0.002 180 160 3.00 2.80 2.60 2.40 2.20 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.50 -2.0 IOUT VON 0 2.0 4.0 Figure 23. tOFF Response RL = 500 W VIN = 3.3 V CL = 3.3 F 1.00 0.012 1.20 0.011 1.10 0.010 1.00 12.0 14.0 16.0 0.600 RL = 10 W VIN = 3.3 V CL = 3.3 F 0.550 0.500 0.90 0.80 0.400 0.70 0.007 0.70 0.350 0.60 0.006 0.60 0.300 0.50 0.005 IOUT 0.40 0.004 0.30 0.003 0.20 0.002 VON 0.10 0.001 Control Input Voltage (V) 0.009 0.008 Output Current (A) Control Input Voltage (V) 8.0 10.0 Time (s) 0.32 0.30 0.28 0.26 0.24 0.22 0.20 0.18 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0.00 -0.02 -0.04 -0.05 18.0 0.80 0.90 0.450 0.50 0.250 0.40 0.200 IOUT 0.30 0.150 0.100 0.20 VON 0.10 0.050 0.00 0.000 0.00 0.000 -0.10 -0.001 -0.10 -0.050 -0.20 -0.002 -0.20 -0.100 -0.30 -0.003 -0.30 -0.150 -0.40 -3.5-3.0 -0.004 -0.40 -20 -2.0 -1.0 0.0 1.0 2.0 Time (s) 3.0 4.0 5.0 6.0 6.5 -0.200 0 20 40 Figure 25. tOFF Response 0.006 RL = 500 W VIN = 1 V CL = 0.1 F 1.10 1.00 0.90 0.002 0.40 IOUT 0.001 0.20 VON 0.000 0.00 -0.10 -0.001 -0.20 -0.30 -0.002 40 60 80 100 Time (s) 120 140 Figure 27. tOFF Response Copyright (c) 2008, Texas Instruments Incorporated 160 180 Control Input Voltage (V) 0.50 Output Current (A) 0.003 20 160 180 0.12 0.90 0.60 0 140 RL = 10 W VIN = 1 V CL = 0.1 F 1.00 0.005 0.70 -0.40 -20 120 1.20 0.004 0.10 80 100 Time (s) 1.10 0.80 0.30 60 Figure 26. tOFF Response 1.20 Control Input Voltage (V) 6.0 0.35 0.34 Figure 24. tOFF Response 1.20 1.10 RL = 10 W VIN = 3.3 V CL = 0.1 F Output Current (A) 1.20 0.014 0.013 Output Current (A) RL = 500 W VIN = 3.3 V CL = 0.1 F 0.11 0.10 0.09 0.80 0.08 0.70 0.07 0.60 0.06 0.50 0.05 0.40 0.04 0.03 0.30 IOUT 0.20 0.02 VON 0.10 0.01 0.00 0.00 -0.10 -0.01 -0.20 -0.02 -0.30 -0.03 -0.40 -2.0 Output Current (A) 1.38 1.30 -0.04 0.0 2.0 4.0 6.0 8.0 10.0 Time (s) 12.0 14.0 16.0 18.0 Figure 28. tOFF Response Submit Documentation Feedback Product Folder Link(s): TPS22921 TPS22922 TPS22922B 15 TPS22921, TPS22922, TPS22922B SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008........................................................................................................................................ www.ti.com TYPICAL CHARACTERISTICS (continued) RL = 500 W VIN = 1 V CL = 3.3 F 1.10 1.00 0.90 1.00 0.005 0.90 0.70 0.003 0.50 0.002 0.40 IOUT 0.30 0.001 0.20 VON 0.10 Control Input Voltage (V) 0.004 0.60 0.000 0.00 -0.10 -0.001 -0.20 -0.30 -0.40 -500 -0.002 0 500 1000 1500 2000 2500 Time (s) 3000 3500 4000 RL = 10 W VIN = 1 V CL = 3.3 F 1.10 Output Current (A) Control Input Voltage (V) 0.80 0.12 1.20 0.10 0.09 0.80 0.08 0.70 0.07 0.60 0.06 0.50 0.05 IOUT 0.40 0.04 0.30 0.03 0.20 0.02 VON 0.10 0.01 0.00 0.00 -0.10 -0.01 -0.20 -0.02 -0.30 -0.03 -0.40 -20 4500 0.11 Output Current (A) 0.006 1.20 -0.04 0.0 20 40 Figure 29. tOFF Response 60 80 100 Time (s) 120 140 160 180 Figure 30. tOFF Response 0.02 ON = 1.8 V 0.01 IOUT = 6.6 mA tOFF = 8 s 0.00 -0.01 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 0.03 RL = 500 W VIN = 3.3 V CL = 1 F 0.02 ON = 1.8 V 0.01 IOUT = 6.6 mA 0.00 tOFF = 50 s -0.01 1.2 0.03 RL = 500 W VIN = 3.3 V CL = 3 F RL = 500 W VIN = 1 V CL = 0.1 F 1.1 1.0 0.9 ON = 0.85 V 0.8 0.02 ON = 1.8 V 0.01 0.6 0.5 0.4 0.3 0.00 IOUT = 2 mA 0.2 0.1 tOFF = 90 s Output Current (A) 0.01 IOUT = 6.6 mA ON Input Voltage (V) 0.7 tOFF = 20 s 0.0 0.00 -0.1 -0.2 -0.3 -0.01 Figure 33. tOFF Response 16 Figure 32. tOFF Response Output Current (A) ON Input Voltage (V) Figure 31. tOFF Response 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 Output Current (A) 0.03 RL = 500 W VIN = 3.3 V CL = 0.1 F ON Input Voltage (V) 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 Output Current (A) ON Input Voltage (V) TPS22922 Submit Documentation Feedback -0.4 Figure 34. tOFF Response Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): TPS22921 TPS22922 TPS22922B TPS22921, TPS22922, TPS22922B www.ti.com........................................................................................................................................ SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008 TYPICAL CHARACTERISTICS (continued) 1.2 1.2 RL = 500 W VIN = 1 V CL = 1 F 1.1 1.0 ON = 0.85 V 1.0 0.9 0.01 0.6 0.5 0.4 IOUT = 2 mA 0.3 tOFF = 240 s 0.2 ON Input Voltage (V) 0.7 Output Current (A) 0.7 ON Input Voltage (V) ON = 0.85 V 0.8 0.01 0.1 0.6 0.5 0.4 IOUT = 2 mA 0.3 0.2 0.1 0.0 Output Current (A) 0.9 0.8 RL = 500 W VIN = 1 V CL = 3 F 1.1 tOFF = 400 s 0.0 0.00 -0.1 -0.1 -0.2 -0.2 -0.3 -0.3 -0.4 -0.4 0.00 Figure 35. tOFF Response Figure 36. tOFF Response TPS22922B 7.00 6.00 5.00 IOUT 4.00 3.00 VON 2.00 1.00 0.00 -1.00 -2.00 RL = 500 W VIN = 3.3 V CL = 0.1 F -3.00 -4.00 -5.00 -6.00 50 100 150 200 250 Time (s) 300 350 400 450 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -100 400.0 350.0 300.0 200.0 150.0 VON 100.0 50.0 0.00 -50.0 10.00 2.50 2.40 -250.0 -300.0 0 100 200 IOUT 5.00 4.00 3.00 VON 2.00 1.00 0.00 -1.00 -2.00 RL = 500 W VIN = 3.3 V CL = 3.3 F -3.00 -4.00 -5.00 -6.00 400 500 Time (ms) 600 700 Figure 39. tON Response Copyright (c) 2008, Texas Instruments Incorporated 800 900 Control Input Voltage (V) 6.00 Output Current (mA) Control Input Voltage (V) 7.00 300 300 400 500 Time (s) 600 700 800 900 499.9 450.0 2.20 8.00 200 -200.0 2.50 2.40 9.00 100 -150.0 Figure 38. tON Response 2.20 0 -100.0 RL = 10 W VIN = 3.3 V CL = 0.1 F Figure 37. tON Response 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -100 250.0 IOUT 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -100 400.0 350.0 300.0 250.0 IOUT 200.0 150.0 VON 100.0 50.0 0.00 -50.0 Output Current (mA) 0 450.0 2.20 8.00 Control Input Voltage (V) 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -50 Output Current (mA) Control Input Voltage (V) 2.20 499.9 2.50 2.40 9.00 Output Current (mA) 10.00 2.50 2.40 -100.0 RL = 10 W VIN = 3.3 V CL = 3.3 F -150.0 -200.0 -250.0 -300.0 0 100 200 300 400 500 Time (ms) 600 700 800 900 Figure 40. tON Response Submit Documentation Feedback Product Folder Link(s): TPS22921 TPS22922 TPS22922B 17 TPS22921, TPS22922, TPS22922B SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008........................................................................................................................................ www.ti.com 5.00 2.50 2.40 4.50 4.00 3.50 3.00 2.50 2.00 1.50 1.00 IOUT 0.50 0.00 -0.50 RL = 500 W VIN = 1 V CL = 0.1 F -1.00 -1.50 -2.00 -2.50 200 400 600 800 1000 Time (s) 1200 1400 1600 -3.00 1800 249.9 220.0 2.20 200.0 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -200 VON 0 IOUT 200 400 Figure 41. tON Response 4.50 4.00 3.50 2.50 2.00 1.50 VON 1.00 IOUT 0.50 0.00 -0.50 Control Input Voltage (V) 3.00 Output Current (mA) Control Input Voltage (V) 2.20 -1.00 RL = 500 W VIN = 1 V CL = 3.3 F -1.50 -2.00 -2.50 0 200 400 600 800 1000 Time (s) 1200 1400 1600 -3.00 1800 249.9 220.0 2.20 200.0 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -500 VON 0 500 IOUT 1000 10.00 2.50 2.40 5.00 IOUT 3.00 2.00 1.00 VON 0.00 -1.00 -3.00 -4.00 -5.00 -6.00 30 40 50 Time (s) 60 70 Figure 45. tOFF Response 18 -2.00 RL = 500 W VIN = 3.3 V CL = 0.1 F Submit Documentation Feedback 80 90 Control Input Voltage (V) 6.00 Output Current (mA) Control Input Voltage (V) 7.00 4.00 499.9 450.0 2.20 8.00 20 3000 2.50 2.40 9.00 10 1500 2000 2500 Time (s) 180.0 160.0 140.0 120.0 100.0 80.0 60.0 40.0 20.0 0.00 -20.0 -40.0 RL = 10 W -60.0 VIN = 1 V -80.0 CL = 3.3 F -100.0 -120.0 -150.0 3500 4000 4500 Figure 44. tON Response 2.20 0 1200 2.50 2.40 Figure 43. tON Response 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -10 800 1000 Time (s) Figure 42. tON Response 5.00 2.50 2.40 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -200 600 180.0 160.0 140.0 120.0 100.0 80.0 60.0 40.0 20.0 0.00 -20.0 -40.0 RL = 10 W -60.0 VIN = 1 V -80.0 CL = 0.1 F -100.0 -120.0 -150.0 1400 1600 1800 Output Current (mA) 0 2.50 2.40 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 VON 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -10 0 400.0 350.0 300.0 250.0 200.0 IOUT 150.0 100.0 50.0 0.00 -50.0 Output Current (mA) VON Control Input Voltage (V) 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -200 Output Current (A) Control Input Voltage (V) 2.20 Output Current (A) TYPICAL CHARACTERISTICS (continued) -100.0 RL = 10 W VIN = 3.3 V CL = 0.1 F -150.0 -200.0 -250.0 -300.0 10 20 30 40 50 Time (s) 60 70 80 90 Figure 46. tOFF Response Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): TPS22921 TPS22922 TPS22922B TPS22921, TPS22922, TPS22922B www.ti.com........................................................................................................................................ SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008 TYPICAL CHARACTERISTICS (continued) 8.00 7.00 5.00 IOUT 3.00 2.00 1.00 VON 0.00 -1.00 Control Input Voltage (V) 6.00 4.00 -2.00 RL = 500 W VIN = 3.3 V CL = 3.3 F -3.00 -4.00 -5.00 400 600 800 1000 Time (s) 1200 1400 1600 350.0 300.0 250.0 200.0 IOUT 150.0 100.0 50.0 0.00 -50.0 4.50 4.00 3.50 2.50 2.00 IOUT 1.50 1.00 VON 0.50 0.00 -0.50 Control Input Voltage (V) 3.00 Output Current (mA) Control Input Voltage (V) 2.20 -1.00 RL = 500 W VIN = 1 V CL = 0.1 F -1.50 -2.00 -2.50 -3.00 10 20 30 40 50 Time (s) 60 70 -300.0 50 100 80 90 5.00 4.50 4.00 3.50 2.50 2.00 1.50 VON 1.00 IOUT 0.50 0.00 -0.50 RL = 500 W VIN = 1 V CL = 3.3 F -1.00 -1.50 -2.00 -2.50 400 600 800 1000 Time (s) 1200 1400 Figure 51. tOFF Response Copyright (c) 2008, Texas Instruments Incorporated 1600 -3.00 1800 Control Input Voltage (V) 3.00 Output Current (mA) Control Input Voltage (V) 2.20 200 200 250 Time (s) 300 350 400 450 249.9 220.0 2.20 200.0 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -10 180.0 160.0 140.0 120.0 100.0 80.0 60.0 40.0 20.0 0.00 -20.0 -40.0 -60.0 -80.0 -100.0 -120.0 -150.0 IOUT VON RL = 10 W VIN = 1 V CL = 0.1 F 0 10 20 30 40 50 Time (s) 60 70 80 90 Figure 50. tOFF Response 2.50 2.40 0 150 2.50 2.40 Figure 49. tOFF Response 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -200 -200.0 Figure 48. tOFF Response 5.00 0 -150.0 -250.0 Figure 47. tOFF Response 2.50 2.40 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -10 -100.0 RL = 10 W VIN = 3.3 V CL = 3.3 F Output Current (mA) 200 -6.00 1800 400.0 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 VON 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -50 0 2.50 2.40 249.9 220.0 2.20 200.0 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -50 IOUT VON 0 50 100 150 200 250 Time (s) 300 180.0 160.0 140.0 120.0 100.0 80.0 60.0 40.0 20.0 0.00 -20.0 -40.0 RL = 10 W -60.0 VIN = 1 V -80.0 CL = 3.3 F -100.0 -120.0 -150.0 400 350 450 Output Current (A) 0 450.0 2.20 Output Current (mA) Control Input Voltage (V) 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 -1.20 -1.40 -1.50 -200 499.9 2.50 2.40 9.00 2.20 Output Current (mA) 10.00 2.50 2.40 Figure 52. tOFF Response Submit Documentation Feedback Product Folder Link(s): TPS22921 TPS22922 TPS22922B 19 TPS22921, TPS22922, TPS22922B SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008........................................................................................................................................ www.ti.com PARAMETER MEASURMENT INFORMATION VIN ON VOUT (A) RL CL + - TPS22921/22/22B OFF CIN =1 F GND GND GND TEST CIRCUIT 1.8 V VON VON VON/2 VON/2 tr 0V tf 0V tON tOFF 90% VOUT VOH VOUT VOUT/2 VOUT/2 10% 90% 10% VOL tON/tOFF WAVEFORMS A. trise and tfall of the control signal is 100 ns. Figure 53. Test Circuit and tON/tOFF Waveforms 20 Submit Documentation Feedback Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): TPS22921 TPS22922 TPS22922B TPS22921, TPS22922, TPS22922B www.ti.com........................................................................................................................................ SLVS749A - NOVEMBER 2008 - REVISED DECEMBER 2008 APPLICATION INFORMATION ON/OFF Control The ON pin controls the state of the switch. Activating ON continuously holds the switch in the on state so long as there is no fault. ON is active HI and has a low threshold making it capable of interfacing with low voltage signals. The ON pin is compatible with standard GPIO logic threshold. It can be used with any microcontroller with 1.2-V, 1.8-V, 2.5-V or 3.3-V GPIOs. Input Capacitor To limit the voltage drop on the input supply caused by transient in-rush currents when the switch turns on into a discharged load capacitor or short-circuit, a capacitor must be placed between VIN and GND . A 1-F ceramic capacitor, CIN, placed close to the pins is usually sufficient. Higher values of CIN can be used to further reduce the voltage drop during higher current application. When switching a heavy load, it is recommended to have an input capacitor about 10 or more times higher than the output capacitor in order to avoid any supply drop. Output Capacitor Due to the integral body diode in the PMOS switch, a CIN greater than CL is highly recommended. A CL greater than CIN can cause VOUT to exceed VIN when the system supply is removed. This could result in current flow through the body diode from VOUT to VIN. Board Layout For best performance, all traces should be as short as possible. To be most effective, the input and output capacitors should be placed close to the device to minimize the effects that parasitic trace inductances may have on normal and short-circuit operation. Using wide traces for VIN, VOUT, and GND will help minimize the parasitic electrical effects along with minimizing the case to ambient thermal impedance. Copyright (c) 2008, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TPS22921 TPS22922 TPS22922B 21 PACKAGE OPTION ADDENDUM www.ti.com 15-Aug-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) TPS22921YFPR ACTIVE DSBGA YFP 6 3000 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM TPS22921YZPR ACTIVE DSBGA YZP 6 3000 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM TPS22922BYFPR ACTIVE DSBGA YFP 6 3000 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM TPS22922BYZPR ACTIVE DSBGA YZP 6 3000 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM TPS22922YFPR ACTIVE DSBGA YFP 6 3000 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM TPS22922YZPR ACTIVE DSBGA YZP 6 3000 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 15-Aug-2012 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 12-May-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) TPS22921YFPR DSBGA YFP 6 3000 180.0 8.4 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 0.89 1.29 0.62 4.0 8.0 Q1 TPS22921YZPR DSBGA YZP 6 3000 180.0 8.4 1.02 1.52 0.63 4.0 8.0 Q1 TPS22922BYFPR DSBGA YFP 6 3000 180.0 8.4 0.89 1.29 0.62 4.0 8.0 Q1 TPS22922BYZPR DSBGA YZP 6 3000 180.0 8.4 1.02 1.52 0.63 4.0 8.0 Q1 TPS22922YFPR DSBGA YFP 6 3000 180.0 8.4 0.89 1.29 0.62 4.0 8.0 Q1 TPS22922YZPR DSBGA YZP 6 3000 180.0 8.4 1.02 1.52 0.63 4.0 8.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 12-May-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPS22921YFPR DSBGA YFP 6 3000 210.0 185.0 35.0 TPS22921YZPR DSBGA YZP 6 3000 220.0 220.0 34.0 TPS22922BYFPR DSBGA YFP 6 3000 220.0 220.0 34.0 TPS22922BYZPR DSBGA YZP 6 3000 220.0 220.0 34.0 TPS22922YFPR DSBGA YFP 6 3000 210.0 185.0 35.0 TPS22922YZPR DSBGA YZP 6 3000 220.0 220.0 34.0 Pack Materials-Page 2 D: Max = 1.418 mm, Min =1.358 mm E: Max = 0.918 mm, Min =0.858 mm D: Max = 1.418 mm, Min =1.358 mm E: Max = 0.918 mm, Min =0.858 mm D: Max = 1.418 mm, Min =1.358 mm E: Max = 0.918 mm, Min =0.858 mm IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated