MMSZ52xxET1G Series, SZMMSZ52xxET1G Series Zener Voltage Regulators 500 mW SOD-123 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD-123 package. These devices provide a convenient alternative to the leadless 34-package style. http://onsemi.com Features 500 mW Rating on FR-4 or FR-5 Board Wide Zener Reverse Voltage Range - 2.4 V to 110 V Package Designed for Optimal Automated Board Assembly Small Package Size for High Density Applications General Purpose, Medium Current ESD Rating of Class 3 (> 16 kV) per Human Body Model Peak Power - 225 W (8 x 20 ms) SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable Pb-Free Packages are Available* SOD-123 CASE 425 STYLE 1 1 Cathode 2 Anode MARKING DIAGRAM Mechanical Characteristics: CASE: Void-free, transfer-molded, thermosetting plastic case FINISH: Corrosion resistant finish, easily solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 1 xxx M G G xxx = Device Code (Refer to page 2) M = Date Code G = Pb-Free Package 260C for 10 Seconds POLARITY: Cathode indicated by polarity band FLAMMABILITY RATING: UL 94 V-0 (Note: Microdot may be in either location) MAXIMUM RATINGS Rating Symbol Max Units Peak Power Dissipation @ 20 ms (Note 1) @ TL 25C Ppk 225 W Total Power Dissipation on FR-5 Board, (Note 3) @ TL = 75C Derated above 75C PD Thermal Resistance, (Note 2) Junction-to-Ambient RqJA Thermal Resistance, (Note 2) Junction-to-Lead RqJL Junction and Storage Temperature Range TJ, Tstg 500 6.7 mW mW/C ORDERING INFORMATION Package Shipping MMSZ52xxET1G SOD-123 (Pb-Free) 3,000 / Tape & Reel SZMMSZ52xxET1G SOD-123 (Pb-Free) 3,000 / Tape & Reel MMSZ52xxET3G SOD-123 (Pb-Free) 10,000 / Tape & Reel Device C/W 340 C/W 150 -55 to +150 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Nonrepetitive current pulse per Figure 11. 2. Thermal Resistance measurement obtained via infrared Scan Method. 3. FR-5 = 3.5 x 1.5 inches, using the minimum recommended footprint. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 2 of this data sheet. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Semiconductor Components Industries, LLC, 2012 February, 2012 - Rev. 8 1 Publication Order Number: MMSZ5221ET1/D MMSZ52xxET1G Series, SZMMSZ52xxET1G Series ELECTRICAL CHARACTERISTICS (TA = 25C unless I otherwise noted, VF = 0.95 V Max. @ IF = 10 mA) IF Parameter Symbol VZ Reverse Zener Voltage @ IZT IZT Reverse Current ZZT Maximum Zener Impedance @ IZT IZK Reverse Current ZZK Maximum Zener Impedance @ IZK IR Reverse Leakage Current @ VR VR Reverse Voltage IF Forward Current VF Forward Voltage @ IF VZ VR V IR VF IZT Zener Voltage Regulator ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA) Zener Voltage (Notes 4 and 5) VZ (V) Zener Impedance (Note 6) Leakage Current @ IZT ZZT @ IZT Max mA W W mA mA V 2.4 2.52 20 30 1200 0.25 100 1 2.57 2.7 2.84 20 30 1300 0.25 75 1 CA6 3.14 3.3 3.47 20 28 1600 0.25 25 1 CA8 3.71 3.9 4.10 20 23 1900 0.25 10 1 MMSZ5229ET1G CA9 4.09 4.3 4.52 20 22 2000 0.25 5 1 MMSZ5231ET1G CB2 4.85 5.1 5.36 20 17 1600 0.25 5 2 MMSZ5232ET1G CB3 5.32 5.6 5.88 20 11 1600 0.25 5 3 MMSZ5234ET1G CB5 5.89 6.2 6.51 20 7 1000 0.25 5 4 MMSZ5235ET1G CB6 6.46 6.8 7.14 20 5 750 0.25 3 5 MMSZ5236ET1G CB7 7.13 7.5 7.88 20 6 500 0.25 3 6 MMSZ5237ET1G CB8 7.79 8.2 8.61 20 8 500 0.25 3 6.5 MMSZ5240ET1G CC2 9.50 10 10.50 20 17 600 0.25 3 8 MMSZ5242ET1G CC4 11.40 12 12.60 20 30 600 0.25 1 9.1 MMSZ5243ET1G CC5 12.35 13 13.65 9.5 13 600 0.25 0.5 9.9 MMSZ5244ET1G CC6 13.30 14 14.70 9.0 15 600 0.25 0.1 10 MMSZ5245ET1G CC7 14.25 15 15.75 8.5 16 600 0.25 0.1 11 MMSZ5246ET1G CC8 15.20 16 16.80 7.8 17 600 0.25 0.1 12 MMSZ5248ET1G CD1 17.10 18 18.90 7.0 21 600 0.25 0.1 14 MMSZ5250ET1G CD3 19.00 20 21.00 6.2 25 600 0.25 0.1 15 MMSZ5252ET1G CD5 22.80 24 25.20 5.2 33 600 0.25 0.1 18 Device Marking Min Nom MMSZ5221ET1G CA1 2.28 MMSZ5223ET1G CA3 MMSZ5226ET1G MMSZ5228ET1G Device* ZZK @ IZK 4. The type numbers shown have a standard tolerance of 5% on the nominal Zener voltage. 5. Nominal Zener voltage is measured with the device junction in thermal equilibrium at TL = 30C 1C. 6. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the ac current applied. The specified limits are for IZ(AC) = 0.1 IZ(dc) with the AC frequency = 1 kHz. *Include SZ-prefix devices where applicable http://onsemi.com 2 IR @ VR MMSZ52xxET1G Series, SZMMSZ52xxET1G Series ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA) Zener Voltage (Notes 4 and 5) VZ (V) Zener Impedance (Note 6) @ IZT ZZT @ IZT ZZK @ IZK Leakage Current IR @ VR Device Marking Min Nom Max mA W W mA mA V MMSZ5253ET1G CD6 23.75 25 26.25 5.0 35 600 0.25 0.1 19 MMSZ5254ET1G CD7 25.65 27 28.35 4.6 41 600 0.25 0.1 21 MMSZ5255ET1G CD8 26.60 28 29.40 4.5 44 600 0.25 0.1 21 MMSZ5256ET1G CD9 28.50 30 31.50 4.2 49 600 0.25 0.1 23 MMSZ5257ET1G CE1 31.35 33 34.65 3.8 58 700 0.25 0.1 25 MMSZ5258ET1G CE2 34.20 36 37.80 3.4 70 700 0.25 0.1 27 MMSZ5259ET1G CE3 37.05 39 40.95 3.2 80 800 0.25 0.1 30 MMSZ5262ET1G CE6 48.45 51 53.55 2.5 125 1100 0.25 0.1 39 MMSZ5263ET1G CE7 53.20 56 58.80 2.2 150 1300 0.25 0.1 43 Device* 4. The type numbers shown have a standard tolerance of 5% on the nominal Zener voltage. 5. Nominal Zener voltage is measured with the device junction in thermal equilibrium at TL = 30C 1C. 6. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the ac current applied. The specified limits are for IZ(AC) = 0.1 IZ(dc) with the AC frequency = 1 kHz. *Include SZ-prefix devices where applicable http://onsemi.com 3 MMSZ52xxET1G Series, SZMMSZ52xxET1G Series qVZ, TEMPERATURE COEFFICIENT (mV/C) qVZ, TEMPERATURE COEFFICIENT (mV/C) TYPICAL CHARACTERISTICS 8 100 7 TYPICAL TC VALUES FOR MMSZ5221BT1G SERIES 6 5 4 VZ @ IZT 3 2 1 0 -1 -2 -3 2 3 4 5 6 7 8 9 10 VZ, NOMINAL ZENER VOLTAGE (V) 11 12 TYPICAL TC VALUES FOR MMSZ5221BT1G SERIES VZ @ IZT 10 1 10 100 VZ, NOMINAL ZENER VOLTAGE (V) Figure 1. Temperature Coefficients (Temperature Range - 55C to +150C) Figure 2. Temperature Coefficients (Temperature Range - 55C to +150C) 1000 Ppk, PEAK SURGE POWER (WATTS) PD, POWER DISSIPATION (WATTS) 1.2 1.0 PD versus TL 0.8 0.6 100 PD versus TA 0.4 0.2 0 0 25 RECTANGULAR WAVEFORM, TA = 25C 50 75 100 T, TEMPERATURE (C) 125 10 1 150 Figure 3. Steady State Power Derating 1 1000 1000 TJ = 25C IZ(AC) = 0.1 IZ(DC) f = 1 kHz IF, FORWARD CURRENT (mA) IZ = 1 mA 100 75 V (MMSZ5267BT1) 91 V (MMSZ5270BT1) 100 5 mA 20 mA 10 10 150C 1 10 100 PW, PULSE WIDTH (ms) Figure 4. Maximum Nonrepetitive Surge Power 1000 ZZT, DYNAMIC IMPEDANCE (W) 0.1 1 10 VZ, NOMINAL ZENER VOLTAGE 100 1 0.4 Figure 5. Effect of Zener Voltage on Zener Impedance 0.5 75C 25C 0C 0.6 0.7 0.8 0.9 1.0 VF, FORWARD VOLTAGE (V) Figure 6. Typical Forward Voltage http://onsemi.com 4 1.1 1.2 MMSZ52xxET1G Series, SZMMSZ52xxET1G Series TYPICAL CHARACTERISTICS TA = 25C 0 V BIAS 1 V BIAS C, CAPACITANCE (pF) IR, LEAKAGE CURRENT (mA) 1000 100 BIAS AT 50% OF VZ NOM 10 1 1 100 10 VZ, NOMINAL ZENER VOLTAGE (V) 1000 100 10 1 +150C 0.1 0.01 0.001 + 25C 0.0001 -55C 0.00001 0 10 Figure 7. Typical Capacitance IZ, ZENER CURRENT (mA) 10 1 0.1 2 4 6 8 VZ, ZENER VOLTAGE (V) 1 0.1 0.01 12 10 10 100 30 50 70 VZ, ZENER VOLTAGE (V) PEAK VALUE IRSM @ 8 ms tr 90 10 PULSE WIDTH (tP) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAY = 8 ms 80 70 60 50 HALF VALUE IRSM/2 @ 20 ms 40 30 tP 20 10 0 0 20 90 Figure 10. Zener Voltage versus Zener Current (12 V to 91 V) Figure 9. Zener Voltage versus Zener Current (VZ Up to 12 V) % OF PEAK PULSE CURRENT IZ, ZENER CURRENT (mA) TA = 25C TA = 25C 0 80 Figure 8. Typical Leakage Current 100 100 0.01 20 30 40 50 60 70 VZ, NOMINAL ZENER VOLTAGE (V) 40 60 t, TIME (ms) Figure 11. 8 20 ms Pulse Waveform http://onsemi.com 5 80 90 MMSZ52xxET1G Series, SZMMSZ52xxET1G Series PACKAGE DIMENSIONS SOD-123 CASE 425-04 ISSUE G D AAAA AAAA A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. A1 1 HE DIM A A1 b c D E HE L q E 2 MIN 0.037 0.000 0.020 --0.055 0.100 0.140 0.010 0 INCHES NOM 0.046 0.002 0.024 --0.063 0.106 0.145 ----- MAX 0.053 0.004 0.028 0.006 0.071 0.112 0.152 --10 STYLE 1: PIN 1. CATHODE 2. ANODE q L b MILLIMETERS MIN NOM MAX 0.94 1.17 1.35 0.00 0.05 0.10 0.51 0.61 0.71 ----0.15 1.40 1.60 1.80 2.54 2.69 2.84 3.56 3.68 3.86 ----0.25 --10 0 C SOLDERING FOOTPRINT* EE EE EE EE 0.91 0.036 2.36 0.093 4.19 0.165 EE EE EE EE SCALE 10:1 1.22 0.048 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMSZ5221ET1/D