SD700C..L SERIES
STANDARD RECOVERY DIODES Hockey Puk Version
700A
Bulletin I2096/A
Features
Wide current range
High voltage ratings up to 4500V
High surge current capabilities
Diffused junction
Hockey Puk version
Case style DO-200AB (B-PUK)
Typical Applications
Converters
Power supplies
High power drives
Auxiliary system supplies for traction applications
Major Ratings and Characteristics
IF(AV) 700 A
@ Ths 55 °C
IF(RMS) 1310 A
@ Ths 25 °C
IFSM @ 50Hz 7500 A
@ 60Hz 7850 A
I2t@ 50Hz 281 KA2s
@ 60Hz 257 KA2s
VRRM range 3000 to 4500 V
TJ- 40 to 150 °C
Parameters SD700C..L Units
case style DO-200AB (B-PUK)
Next Data SheetIndex
Previous Datasheet
To Order
SD700C..L Series
Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max.
Type number Code peak reverse voltage repetitive peak rev. voltage @ TJ = TJ max.
V V mA
30 3000 3100
36 3600 3700
40 4000 4100
45 4500 4600
ELECTRICAL SPECIFICATIONS
Voltage Ratings
SD700C..L 50
IF(AV) Max. average forward current 700 (345) A180° conduction, half sine wave
@ Heatsink temperature 55 (85) °C Double side (single side) cooled
IF(RMS) Max. RMS forward current 1310 A@ 25°C heatsink temperature double side cooled
IFSM Max. peak, one-cycle forward, 7500 t = 10ms No voltage
non-repetitive surge current 7850 t = 8.3ms reapplied
6310 t = 10ms50% VRRM
6600 t = 8.3ms reapplied Sinusoidal halfwave,
I2tMaximum I2t for fusing 281 t = 10ms No voltage Initial TJ = TJ max.
257 t = 8.3ms reapplied
199 t = 10ms 50% VRRM
182 t = 8.3ms reapplied
I2√tMaximum I2√t for fusing 2810 KA2√st = 0.1 to 10ms, no voltage reapplied
VF(TO)1 Low level value of threshold
voltage
VF(TO)2 High level value of threshold
voltage
rf1Low level value of forward
slope resistance
rf2High level value of forward
slope resistance
VFM Max. forward voltage drop 1.66 VIpk= 1000A, TJ = TJ max, tp = 10ms sinusoidal wave
A
KA2s
0.88 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
Parameter SD700C..L Units Conditions
Forward Conduction
V
mΩ
0.78 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
0.99 (I > π x IF(AV)),TJ = TJ max.
0.73 (I > π x IF(AV)),TJ = TJ max.
Next Data SheetIndex
Previous Datasheet
To Order
SD700C..L Series
Fig. 4 - Current Ratings Characteristics
Fig. 6 - Forward Power Loss Characteristics
Fig. 7 - Maximum Non-Repetitive Surge Current Fig. 8 - Maximum Non-Repetitive Surge Current
Fig. 3 - Current Ratings Characteristics
Fig. 5 - Forward Power Loss Characteristics
To Order
Next Data SheetIndex
Previous Datasheet
SD700C..L Series
∆RthJ-hs Conduction
(The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC)
Ordering Information Table
1-Diode
2-Essential part number
3-0 = Standard recovery
4-C = Ceramic Puk
5-Voltage code: code x 100 = VRRM (see Voltage Ratings Table)
6-L = Puk Case DO-200AB (B-PUK)
1 2 34 5 6
Device Code SD 70 0 C45 L
Sinusoidal conduction Rectangular conduction
Conduction angle Units Conditions
Single Side Double Side Single Side Double Side
180° 0.011 0.011 0.008 0.008
120° 0.014 0.015 0.014 0.014
90° 0.018 0.018 0.019 0.019 K/W TJ = TJ max.
60° 0.026 0.026 0.027 0.028
30° 0.045 0.046 0.046 0.046
TJMax. junction operating temperature range -40 to 150
Tstg Max. storage temperature range -55 to 200
RthJ-hs Max. thermal resistance, junction 0.11 DC operation single side cooled
to heatsink 0.05 DC operation double side cooled
FMounting force, ± 10% 9800 N
(1000) (Kg)
wt Approximate weight 250 g
Case style DO-200AB(B-PUK) See Outline Table
Parameter SD700C..L Units Conditions
Thermal and Mechanical Specifications
°C
K/W
To Order
Next Data SheetIndex
Previous Datasheet
SD700C..L Series
Outline Table
Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics
BOTH ENDS
0.8 (0.03) TWO PLACES
3.5(0.14) DIA. NOM. x
1.8(0.07) DEEP MIN.
34 (1.34) DIA. MAX.
58.5 (2.30) DIA. M AX.
26.9 (1.06)
25.4 (1)
BOTH ENDS
53 (2.09) DIA. MAX.
Case Style DO-200AB (B-PUK)
All dimensions in millimeters (inches)
To Order
Next Data SheetIndex
Previous Datasheet
