The Smart Timing Choice
The Smart Timing Choice
SiTime Corporation 990 Almanor Avenue Sunnyvale, CA 94085 (408) 328-4400 www.sitime.com
Rev. 0.92 Revised January 16, 2013
SiT1618
High Temperature, Standard Frequency Oscillator
Preliminary
Note:
1. All electrical specifications in the above table are specified with 15 pF output load and for all Vdd(s) unless otherwise stated.
2. Contact SiTime for custom drive strength to drive higher or multiple load, or SoftEdge™ option for EMI reduction.
Features Applications
33 standard frequencies between 7.3728 MHz and 48 MHz Automotive, medical, industrial and other high reliability
electronics
100% pin-to-pin drop-in replacement to quartz-based XO Infotainment systems, industrial sensors, collision detection
devices, equipment control boards, etc.
Excellent total frequency stability as low as ±25 PPM
Industry best G-sensitivity of 0.1 PPB/G
Low power consumption of 3.6 mA typical
Standby mode for longer battery life
LVCMOS/HCMOS compatible output
Industry-standard packages: 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2,
7.0 x 5.0 mm
Pb-free, RoHS and REACH compliant
Optional unique device ID for complete traceability (contact SiTime)
Optional AECQ100 compliance (contact SiTime)
Electrical Characteristics[1, 2]
Parameter and Conditions Symbol Min. Typ. Max. Unit Condition
Frequency Range
Output Frequency Range f (Refer to the frequency list page 5) MHz 33 standard frequencies between 7.3728 MHz and 75 MHz
Frequency Stability and Aging
Frequency Stability F_stab -25 – +25 PPM Inclusive of Initial tolerance at 25°C, and variations over
operating temperature, rated power supply voltage and load.
-50 – +50 PPM
Aging Ag –1.5 – 1.5 PPM 1st year at 25°C
Operating Temperature Range
Operating Temperature Range T_use -40 – -105 °C Extended Industrial
-40 – +125 °C Automotive
Supply Voltage and Current Consumption
Supply Voltage Vdd 1.62 1.8 1.98 V Contact SiTime for 1.5V support
2.25 2.5 2.75 V
2.52 2.8 3.08 V
2.7 3.0 3.3 V
2.97 3.3 3.63 V
2.25 – 3.63 V
Current Consumption Idd – 3.9 5 mA No load condition, f = 20 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V
– 3.6 4.5 mA No load condition, f = 20 MHz, Vdd = 1.8V
Standby Current I_std – 2.5 10 AST
= GND, Vdd = 3.0V or 3.3V, Output is Weakly Pulled Down
–2.510AST
= GND, Vdd = 2.5V or 2.8V, Output is Weakly Pulled Down
–15AST
= GND, Vdd = 1.8V, Output is Weakly Pulled Down
LVCMOS Output Characteristics
Duty Cycle DC 45 – 55 % All Vdds
Rise/Fall Time Tr, Tf – 1.2 2.5 ns Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80%
– 1.5 3.5 ns Vdd =1.8V, 20% - 80%
– 1.5 3 ns Vdd = 2.25V - 3.63V, 20% - 80%
Output High Voltage VOH 90% – – Vdd IOH = -4 mA (Vdd = 3.0V or 3.3V)
IOH = -3 mA (Vdd = 2.8V and Vdd = 2.5V)
IOH = -2 mA (Vdd = 1.8V)
Output Low Voltage VOL – – 10% Vdd IOL = 4 mA (Vdd = 3.0V or 3.3V)
IOL = 3 mA (Vdd = 2.8V and Vdd = 2.5V)
IOL = 2 mA (Vdd = 1.8V)
Input Characteristics
Input High Voltage VIH 70% – – Vdd Pin 1, OE or ST
Input Low Voltage VIL – – 30% Vdd Pin 1, OE or ST
Input Pull-up Impedence Z_in – 100 250 kPin 1, OE logic high or logic low, or ST logic high
2––MPin 1, ST logic low
The Smart Timing Choice
The Smart Timing Choice
SiT1618
High Temperature, Standard Frequency Oscillator
Rev. 0.92 Page 2 of 5 www.sitime.com
Notes:
1. All electrical specifications in the above table are specified with 15 pF output load and for all Vdd(s) unless otherwise stated.
2. Contact SiTime for custom drive strength to drive higher or multiple load, or SoftEdge™ option for EMI reduction.
Notes:
3. A pull-up resistor of <10 k between OE/ ST pin and Vdd is recommended in high noise environment.
4. A capacitor value of 0.1 µF between Vdd and GND is recommended.
Electrical Characteristics[1, 2](continued)
Parameter and Conditions Symbol Min. Typ. Max. Unit Condition
Startup and Resume Timing
Startup Time T_start – – 5 ms Measured from the time Vdd reaches its rated minimum value
Enable/Disable Time T_oe – – 150 ns
Resume Time T_resume – – 5 ms Measured from the time ST pin crosses 50% threshold
Jitter
RMS Period Jitter T_jitt – 2 4 ps f = 20 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V
– 2 4.5 ps f = 20 MHz, Vdd = 1.8V
RMS Phase Jitter (random) T_phj – 0.7 1 ps
Integration bandwidth = 900 kHz to 7.5 MHz
–1.53 ps
Integration bandwidth = 12 kHz to 20 MHz
Pin Description
Pin Symbol Functionality
1 OE/ ST
Output
Enable
H or Open[3]: specified frequency output
L: output is high impedance. Only output driver is disabled.
Standby
H or Open[3]: specified frequency output
L: output is low (weak pull down). Device goes to sleep mode. Supply
current reduces to I_std.
2 GND Power Electrical ground[4]
3 OUT Output Oscillator output
4 VDD Power Power supply voltage[4]
Absolute Maximum
Attempted operation outside the absolute maximum ratings of the part may cause permanent damage to the part. Actual perfor-
mance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings.
Parameter Min. Max. Unit
Storage Temperature -65 150 °C
VDD -0.5 4 V
Electrostatic Discharge – 2000 V
Soldering Temperature (follow standard Pb free soldering guidelines) – 260 °C
Junction Temperature – 150 °C
Thermal Consideration
Package
JA, 4 Layer Board
°C/W)
JA, 2 Layer Board
(°C/W)
JC, Bottom
(°C/W)
7050 191 263 30
5032 97 199 24
3225 109 212 27
2520 117 222 26
2016 124 227 26
Environmental Compliance
Parameter Condition/Test Method
Mechanical Shock MIL-STD-883F, Method 2002
Mechanical Vibration MIL-STD-883F, Method 2007
Temperature Cycle JESD22, Method A104
Solderability MIL-STD-883F, Method 2003
Moisture Sensitivity Level MSL1 @ 260°C
1 4
OE/ST VDD
32
GND OUT
Top View
The Smart Timing Choice
The Smart Timing Choice
SiT1618
High Temperature, Standard Frequency Oscillator
Rev. 0.92 Page 3 of 5 www.sitime.com
Notes:
5. Top marking: Y denotes manufacturing origin and XXXX denotes manufacturing lot number. The value of “Y” will depend on the assembly location of the device.
6. A capacitor of value 0.1 µF between Vdd and GND is recommended.
Dimensions and Patterns
Package Size – Dimensions (Unit: mm)[5] Recommended Land Pattern (Unit: mm)[6]
2.0 x 1.6 x 0.75 mm
2.5 x 2.0 x 0.75 mm
3.2 x 2.5 x 0.75 mm
5.0 x 3.2 x 0.75 mm
YXXXX
#3
#4
#2#1
2.0±0.05
1.6±0.05
0.65
#3 #4
#2 #1
0.68
0.93
0.75±0.05
0.48
1.5
0.8
1.2
0.9
2.5 ± 0.05
2.0 ± 0.05
1.1
1.00
0.75
0.5
0.75 ± 0.05
YXXXX
#1
#2
#4#3
#2
#1
#3#4
2.2
1.9
1.4
1.2
1.9
1.1
1.0
1.5
3.2 ± 0.05
2.5 ± 0.05
2.1
0.9
0.7
0.9
0.75 ± 0.05
#1
#2
#4#3
#2
#1
#3#4
YXXXX
2.2
1.9
1.4
1.2
2.54
1.5
1.6
2.2
The Smart Timing Choice
The Smart Timing Choice
SiT1618
High Temperature, Standard Frequency Oscillator
Rev. 0.92 Page 4 of 5 www.sitime.com
Notes:
7. Top marking: Y denotes manufacturing origin and XXXX denotes manufacturing lot number. The value of “Y” will depend on the assembly location of the device.
8. A capacitor of value 0.1 µF between Vdd and GND is recommended.
Dimensions and Patterns
Package Size – Dimensions (Unit: mm)[7] Recommended Land Pattern (Unit: mm)[8]
7.0 x 5.0 x 0.90 mm
5.0 ± 0.05
1.4
1.1
5.08
7.0 ± 0.05
2.6
0.90 ± 0.10
YXXXX
5.08
3.81
2.2
2.0
Rev. 0.92 Page 5 of 5 www.sitime.com
© SiTime Corporation 2013. The information contained herein is subject to change at any time without notice. SiTime assumes no responsibility or liability for any loss, damage or defect of a
Product which is caused in whole or in part by (i) use of any circuitry other than circuitry embodied in a SiTime product, (ii) misuse or abuse including static discharge, neglect or accident, (iii)
unauthorized modification or repairs which have been soldered or altered during assembly and are not capable of being tested by SiTime under its normal test conditions, or (iv) improper
installation, storage, handling, warehousing or transportation, or (v) being subjected to unusual physical, thermal, or electrical stress.
Disclaimer: SiTime makes no warranty of any kind, express or implied, with regard to this material, and specifically disclaims any and all express or implied warranties, either in fact or by
operation of law, statutory or otherwise, including the implied warranties of merchantability and fitness for use or a particular purpose, and any implied warranty arising from course of dealing or
usage of trade, as well as any common-law duties relating to accuracy or lack of negligence, with respect to this material, any SiTime product and any product documentation. Products sold by
SiTime are not suitable or intended to be used in a life support application or component, to operate nuclear facilities, or in other mission critical applications where human life may be involved
or at stake. All sales are made conditioned upon compliance with the critical uses policy set forth below.
CRITICAL USE EXCLUSION POLICY
BUYER AGREES NOT TO USE SITIME'S PRODUCTS FOR ANY APPLICATION OR IN ANY COMPONENTS USED IN LIFE SUPPORT DEVICES OR TO OPERATE NUCLEAR FACILITIES
OR FOR USE IN OTHER MISSION-CRITICAL APPLICATIONS OR COMPONENTS WHERE HUMAN LIFE OR PROPERTY MAY BE AT STAKE.
SiTime owns all rights, title and interest to the intellectual property related to SiTime's products, including any software, firmware, copyright, patent, or trademark. The sale of SiTime products
does not convey or imply any license under patent or other rights. SiTime retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the
sale of products or services by SiTime. Unless otherwise agreed to in writing by SiTime, any reproduction, modification, translation, compilation, or representation of this material shall be strictly
prohibited.
The Smart Timing Choice
The Smart Timing Choice
High Temperature, Standard Frequency Oscillator
SiT1618
Ordering Information
Note:
9. Contact SiTime for custom drive strength to drive higher or multiple load, or SoftEdge™ option for EMI reduction.
Supported Frequencies[10]
Note:
10. Contact SiTime or refer to SiT8918 datasheet for frequencies that are not listed in the above table.
Note:
11. For “–”, contact SiTime for availability.
7.3728 MHz 8 MHz 8.192 MHz 9.8304 MHz 9.84375 MHz 11.0592 MHz 12 MHz 12.288 MHz 13 MHz
13.225625 MHz 13.52127 MHz 14.31818 MHz 14.7456 MHz 15 MHz 16 MHz 16.384 MHz 18.432 MHz 19.6608 MHz
20 MHz 22.1184 MHz 24 MHz 24.56 MHz 24.576 MHz 25 MHz 26 MHz 27 MHz 29.4912 MHz
30 MHz 32 MHz 33 MHz 36 MHz 40 MHz 48 MHz
Ordering Codes for Supported Tape & Reel Packing Method[11]
Device Size 12 mm T&R (3ku) 12 mm T&R (1ku) 8 mm T&R (3ku) 8 mm T&R (1ku)
2.0 x 1.6 mm – – D E
2.5 x 2.0 mm – – D E
3.2 x 2.5 mm – – D E
5.0 x 3.2 mm T Y – –
7.0 x 5.0 mm T Y – –
Frequency
Refer to “Frequency list” below
Part Family
“SiT1618”
Revision Letter
“A” is the revision
Temperature Range
Supply Voltage
“18” for 1.8V ±10%
“25” for 2.5V ±10%
“28” for 2.8V ±10%
“33” for 3.3V ±10%
Packing Method
Output Driver Strength
“–” Default
Feature Pin
“E” for Output Enable
“S” for Standby
“E” Ext. Industrial -40ºC to 105ºC
“A” Automotive -40ºC to 125ºC
Frequency Stability
“2” for ±25 PPM
Package Size
“1” 2.5 x 2.0 mm
“2” 3.2 x 2.5 mm
“3” 5.0 x 3.2 mm
“T”: 12 mm Tape & Reel, 3ku reel
“Y”: 12 mm Tape & Reel, 1ku reel
“D”: 8 mm Tape & Reel, 3ku reel
“E”: 8 mm Tape & Reel, 1ku reel
Blank for Bulk
“8” 7.0 x 5.0 mm
SiT1618AA - 12-18E -25.000000T
“3” for ±50 PPM
“7” 2.0 x 1.6 mm
[9]
“30” for 3.0V ±10%
“XX” for 2.25V to 3.63V
The Smart Timing Choice
The Smart Timing Choice
SiTime Corporation 990 Almanor Avenue Sunnyvale, CA 94085 (408) 328-4400 www.sitime.com
Supplemental Information
The Supplemental Information section is not part of the datasheet and is for informational purposes only.
The Smart Timing Choice
The Smart Timing Choice
SiTime Corporation 990 Almanor Avenue Sunnyvale, CA 94085 (408) 328-4400 www.sitime.com
Silicon MEMS Outperforms Quartz Rev. 1.0 Revised January 16, 2013
Silicon MEMS Outperforms Quartz
The Smart Timing Choice
The Smart Timing Choice
Silicon MEMS Outperforms Quartz
Silicon MEMS Outperforms Quartz Rev. 1.0 www.sitime.com
Best Reliability
Silicon is inherently more reliable than quartz. Unlike quartz
suppliers, SiTime has in-house MEMS and analog CMOS
expertise, which allows SiTime to develop the most reliable
products. Figure 1 shows a comparison with quartz
technology.
Why is SiTime Best in Class:
• SiTime’s MEMS resonators are vacuum sealed using an
advanced Epi-Seal™ process, which eliminates foreign
particles and improves long term aging and reliability
• World-class MEMS and CMOS design expertise
Figure 1. Reliability Comparison[1]
Best Aging
Unlike quartz, MEMS oscillators have excellent long term
aging performance which is why every new SiTime product
specifies 10-year aging. A comparison is shown in Figure 2.
Why is SiTime Best in Class:
• SiTime’s MEMS resonators are vacuum sealed using an
advanced Epi-Seal™ process, which eliminates foreign
particles and improves long term aging and reliability
• Inherently better immunity of electrostatically driven
MEMS resonator
Figure 2. Aging Comparison[2]
Best Electro Magnetic Susceptibility (EMS)
SiTime’s oscillators in plastic packages are up to 54 times
more immune to external electromagnetic fields than quartz
oscillators as shown in Figure 3.
Why is SiTime Best in Class:
• Internal differential architecture for best common mode
noise rejection
• Electrostatically driven MEMS resonator is more immune
to EMS
Figure 3. Electro Magnetic Susceptibility (EMS)[3]
Best Power Supply Noise Rejection
SiTime’s MEMS oscillators are more resilient against noise on
the power supply. A comparison is shown in Figure 4.
Why is SiTime Best in Class:
• On-chip regulators and internal differential architecture for
common mode noise rejection
• Best analog CMOS design expertise
Figure 4. Power Supply Noise Rejection[4]
Mean Time Between Failure (Million Hours)
14
16
28
38
500
0200 400 600
Pericom
TXC
Epson
IDT (Fox)
SiTime
SiTime
20X Better
1.5
3.5
3.0
8.0
0
2
4
6
8
10
1-Year 10-Year
SiTime MEMS vs. Quartz Aging
SiTime MEMS Oscillator Quartz Oscillator
Aging (±PPM)
SiTime
2X Better
- 39 - 40 - 42 - 43 - 45
- 73
- 90
- 80
- 70
- 60
- 50
- 40
- 30
Kyocera Epson TXC CW SiLabs SiTime
SiTime vs Quartz
Electro Magnetic Susceptibility (EMS)
Average Spurs (dB)
SiTime
54X Better
0.0
1.0
2.0
3.0
4.0
5.0
10 100 1,000 10,000
Additive Integrated Phase Jitter per mVp-p
Injected Noise (ps/mv)
Power Supply Noise Frequency (kHz)
Power Supply Noise Rejection
SiTIme NDK Epson Kyocera
SiTime
SiTime
3X Better
The Smart Timing Choice
The Smart Timing Choice
Silicon MEMS Outperforms Quartz
Silicon MEMS Outperforms Quartz Rev. 1.0 www.sitime.com
Best Vibration Robustness
High-vibration environments are all around us. All electronics,
from handheld devices to enterprise servers and storage
systems are subject to vibration. Figure 5 shows a comparison
of vibration robustness.
Why is SiTime Best in Class:
• The moving mass of SiTime’s MEMS resonators is up to
3000 times smaller than quartz
• Center-anchored MEMS resonator is the most robust
design
Figure 5. Vibration Robustness[5]
Best Shock Robustness
SiTime’s oscillators can withstand at least 50,000 g shock.
They all maintain their electrical performance in operation
during shock events. A comparison with quartz devices is
shown in Figure 6.
Why is SiTime Best in Class:
• The moving mass of SiTime’s MEMS resonators is up to
3000 times smaller than quartz
• Center-anchored MEMS resonator is the most robust
design
Figure 6. Shock Robustness[6]
Vibration Sensitivity (ppb/g)
0.10
1.00
10.00
100.00
10 100 1000
Vibration Frequency (Hz)
Vibration Sensitivity vs. Frequency
SiTime TXC Epson Connor Winfield Kyocera SiLabs
SiTime
Up to 30x
Better
14.3
12.6
3.9
2.9 2.5
0.6
0
2
4
6
8
10
12
14
16
K
y
ocer
a
E
p
son TXC CW SiLab
s
SiTime
Differential XO Shock Robustness - 500 g
SiTime
Up to 25x
Better
Peak Frequency Deviation (PPM)
Notes:
1. Data Source: Reliability documents of named companies.
2. Data source: SiTime and quartz oscillator devices datasheets.
3. Test conditions for Electro Magnetic Susceptibility (EMS):
• According to IEC EN61000-4.3 (Electromagnetic compatibility standard)
• Field strength: 3V/m
• Radiated signal modulation: AM 1 kHz at 80% depth
• Carrier frequency scan: 80 MHz – 1 GHz in 1% steps
• Antenna polarization: Vertical
• DUT position: Center aligned to antenna
Devices used in this test:
SiTime, SiT9120AC-1D2-33E156.250000 - MEMS based - 156.25 MHz
Epson, EG-2102CA 156.2500M-PHPAL3 - SAW based - 156.25 MHz
TXC, BB-156.250MBE-T - 3rd Overtone quartz based - 156.25 MHz
Kyocera, KC7050T156.250P30E00 - SAW based - 156.25 MHz
Connor Winfield (CW), P123-156.25M - 3rd overtone quartz based - 156.25 MHz
SiLabs, Si590AB-BDG - 3rd overtone quartz based - 156.25 MHz
4. 50 mV pk-pk Sinusoidal voltage.
Devices used in this test:
SiTime, SiT8208AI-33-33E-25.000000, MEMS based - 25 MHz
NDK, NZ2523SB-25.6M - quartz based - 25.6 MHz
Kyocera, KC2016B25M0C1GE00 - quartz based - 25 MHz
Epson, SG-310SCF-25M0-MB3 - quartz based - 25 MHz
5. Devices used in this test: same as EMS test stated in Note 3.
6. Test conditions for shock test:
• MIL-STD-883F Method 2002
• Condition A: half sine wave shock pulse, 500-g, 1ms
• Continuous frequency measurement in 100 μs gate time for 10 seconds
Devices used in this test: same as EMS test stated in Note 3
7. Additional data, including setup and detailed results, is available upon request to qualified customers. Please contact productsupport@sitime.com.
The Smart Timing Choice
The Smart Timing Choice
Document Feedback Form
Feedback Form Rev. 1.0 www.sitime.com
SiTime values your input in improving our documentation. Click here for our online feedback form or fill out and email the form
below to productsupport@sitime.com.
1. Does the Electrical Characteristics table provide complete information? Yes No
If No, what parameters are missing?
_________________________________________________________________________________________________
2. Is the organization of this document easy to follow? Yes No
If “No,” please suggest improvements that we can make:
_________________________________________________________________________________________________
3. Is there any application specific information that you would like to see in this document? (Check all that apply)
EMI Termination recommendations Shock and vibration performance Other
If “Other,” please specify:
_________________________________________________________________________________________________
4. Are there any errors in this document? Yes No
If “Yes”, please specify (what and where):
_________________________________________________________________________________________________
5. Do you have additional recommendations for this document?
_________________________________________________________________________________________________
Name ________________________________________________________________________________
Title ________________________________________________________________________________
Company _________________________________________________________________________________________
Address _________________________________________________________________________________________
City / State or Province / Postal Code / Country ___________________________________________________________
Telephone __________________________________
Application ________________________________________________________________________________________
Would you like a reply? Yes No
Thank you for your feedback. Please click the email icon in your Adobe Reader tool bar and send to productsupport@sitime.com.
Or you may use our online feedback form.