●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
DATA SHEET
The information in this document is subject to change without notice.
COMPACT SIZE, SLIM-PACKAGE
MINIATURE SIGNAL RELAY
EC2/EE2 SERIES
© NEC TOKIN Corporation 2012
RoHS Compliant
DESCRIPTION
NEC TOKIN EC2/EE2 relay is a standard miniature signal relay, compact and slim.
FEATURES
Compact and light weight
FCC (1500 V) and Telcordia (2500 V) surge capacity
UL recognized and CSA certifi ed.
Low power consumption (100-200 mW)
ND type (High insulation) conform to supplement insulation for EN60950
NKX type (High breakdown voltage) can withstand 1.5KVAC at open contacts
APPLICATIONS
Electronic switching systems, PBX, Terminal equipment, Telephone system
For Right Use of Miniature Relays
DO NOT EXCEED MAXIMUM RATINGS.
Do not use relays under exceeding conditions such as over ambient temperature, over voltage and over
current. Incorrect use could result in abnormal heating, damage to related parts or cause burning.
READ CAUTIONS IN THE SELECTION GUIDE.
Read the cautions described in NEC TOKIN's "Miniature Relays" when you choose relays for your application.
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
2
EC2/EE2 SERIES
3
DIMENSIONS AND PAD LAYOUTS Unit: mm (inch)
EC2 SERIES
Non-latch type, Single coil latch type Double coil latch type
EE2 SERIES
Standard/ Non-latch type, Single coil latch type Standard/ Double coil latch type
15.0 max. (0.59)
7.5 max. (0.30)
5.08 2.54
2.54 5.08
9.4
max.
(0.37)
3.2
(0.13)
0.25
(0.01)
0.5
(0.02)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
NJ type: Lead length 2.8mm
15.0 max. (0.59)
7.5 max. (0.30)
5.08 2.54
2.54 5.08
9.4
max.
(0.37)
3.2
(0.13)
0.25
(0.01)
0.5
(0.02)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
NJ type: Lead length 2.8mm
5.08 2.542.54 5.08
2.54
15.0 max. (0.59) 7.5 max. (0.30)
9.4
max.
(0.37)
3.2
(0.13)
0.25
(0.01)
0.5
(0.02)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
NJ type: Lead length 2.8mm
5.08 2.542.54 5.08
2.54
15.0 max. (0.59) 7.5 max. (0.30)
9.4
max.
(0.37)
3.2
(0.13)
0.25
(0.01)
0.5
(0.02)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
NJ type: Lead length 2.8mm
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 9.5 (0.37)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 9.5 (0.37)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 9.5 (0.37)
2.54
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 9.5 (0.37)
2.54
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
5.08 2.54 2.54 8-Φ0.8
5.08
(mm)
NOTE. General tolerance :±0.1
(Bottom view)
(1.11)
(1.05) 5.08 2.54 2.54 8-Φ0.8
5.08
(mm)
NOTE. General tolerance :±0.1
(Bottom view)
(1.11)
(1.05)
5.082.542.54 10-Φ0.8
5.08
2.54
(mm)
NOTE. General tolerance :±0.1
(Bottom view)
(1.11)
(1.05) 5.082.542.54 10-Φ0.8
5.08
2.54
(mm)
NOTE. General tolerance :±0.1
(Bottom view)
(1.11)
(1.05)
5.08 2.54 2.54
1.0
3.0
7.29
NOTE. General tolerance :±0.1
(Bottom view)
(mm)
(1.05) 5.08 2.54 2.54
1.0
3.0
7.29
NOTE. General tolerance :±0.1
(Bottom view)
(mm)
(1.05)(1.05)
5.08 2.54 2.54 2.54
1.0
3.0
7.29
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05) 5.08 2.54 2.54 2.54
1.0
3.0
7.29
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05)
(Top view)
Minimum footprint / Non-latch type, Single coil latch type Minimum footprint/ Double coil latch type
High solder joint reliability/ High solder joint reliability /
Non-latch type, Single coil latch type Double coil latch type
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 7.5 (0.3)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 7.5 (0.3)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.542.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 7.5 (0.3)
2.54
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.542.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 7.5 (0.3)
2.54
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.542.54
5.08
10.35
max.
(0.41)
1.35
(0.05) 9.0 (0.35)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.542.54
5.08
10.35
max.
(0.41)
1.35
(0.05) 9.0 (0.35)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.35
max.
(0.41)
1.35
(0.05) 9.0 (0.35)
2.54
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.35
max.
(0.41)
1.35
(0.05) 9.0 (0.35)
2.54
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
5.08 2.54 2.54
1.0
2.0
6.29
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05) 5.08 2.54 2.54
1.0
2.0
6.29
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05)
5.08 2.54 2.54 2.54
1.0
2.0
6.29
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05) 5.08 2.54 2.54 2.54
1.0
2.0
6.29
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05)
5.08 2.54 2.54
1.0
2.73
7.02
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05) 5.08 2.54 2.54
1.0
2.73
7.02
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05)
5.08 2.54 2.54 2.54
1.0
2.73
7.02
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05) 5.08 2.54 2.54 2.54
1.0
2.73
7.02
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05)
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
2
EC2/EE2 SERIES
3
DIMENSIONS AND PAD LAYOUTS Unit: mm (inch)
EC2 SERIES
Non-latch type, Single coil latch type Double coil latch type
EE2 SERIES
Standard/ Non-latch type, Single coil latch type Standard/ Double coil latch type
15.0 max. (0.59)
7.5 max. (0.30)
5.08 2.54
2.54 5.08
9.4
max.
(0.37)
3.2
(0.13)
0.25
(0.01)
0.5
(0.02)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
NJ type: Lead length 2.8mm
15.0 max. (0.59)
7.5 max. (0.30)
5.08 2.54
2.54 5.08
9.4
max.
(0.37)
3.2
(0.13)
0.25
(0.01)
0.5
(0.02)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
NJ type: Lead length 2.8mm
5.08 2.542.54 5.08
2.54
15.0 max. (0.59) 7.5 max. (0.30)
9.4
max.
(0.37)
3.2
(0.13)
0.25
(0.01)
0.5
(0.02)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
NJ type: Lead length 2.8mm
5.08 2.542.54 5.08
2.54
15.0 max. (0.59) 7.5 max. (0.30)
9.4
max.
(0.37)
3.2
(0.13)
0.25
(0.01)
0.5
(0.02)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
NJ type: Lead length 2.8mm
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 9.5 (0.37)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 9.5 (0.37)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 9.5 (0.37)
2.54
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 9.5 (0.37)
2.54
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
5.08 2.54 2.54 8-Φ0.8
5.08
(mm)
NOTE. General tolerance :±0.1
(Bottom view)
(1.11)
(1.05) 5.08 2.54 2.54 8-Φ0.8
5.08
(mm)
NOTE. General tolerance :±0.1
(Bottom view)
(1.11)
(1.05)
5.082.542.54 10-Φ0.8
5.08
2.54
(mm)
NOTE. General tolerance :±0.1
(Bottom view)
(1.11)
(1.05) 5.082.542.54 10-Φ0.8
5.08
2.54
(mm)
NOTE. General tolerance :±0.1
(Bottom view)
(1.11)
(1.05)
5.08 2.54 2.54
1.0
3.0
7.29
NOTE. General tolerance :±0.1
(Bottom view)
(mm)
(1.05) 5.08 2.54 2.54
1.0
3.0
7.29
NOTE. General tolerance :±0.1
(Bottom view)
(mm)
(1.05)(1.05)
5.08 2.54 2.54 2.54
1.0
3.0
7.29
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05) 5.08 2.54 2.54 2.54
1.0
3.0
7.29
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05)
(Top view)
Minimum footprint / Non-latch type, Single coil latch type Minimum footprint/ Double coil latch type
High solder joint reliability/ High solder joint reliability /
Non-latch type, Single coil latch type Double coil latch type
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 7.5 (0.3)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 7.5 (0.3)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.542.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 7.5 (0.3)
2.54
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.542.54
5.08
10.0
max.
(0.39)
1.0
(0.04) 7.5 (0.3)
2.54
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.542.54
5.08
10.35
max.
(0.41)
1.35
(0.05) 9.0 (0.35)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.542.54
5.08
10.35
max.
(0.41)
1.35
(0.05) 9.0 (0.35)
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.35
max.
(0.41)
1.35
(0.05) 9.0 (0.35)
2.54
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
15.0 max. (0.59) 7.5 max. (0.30)
5.08 2.54
2.54
5.08
10.35
max.
(0.41)
1.35
(0.05) 9.0 (0.35)
2.54
is basic size.
Other tolerances ±0.2mm Lead size 0.5x0.25 ±0.1
5.08 2.54 2.54
1.0
2.0
6.29
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05) 5.08 2.54 2.54
1.0
2.0
6.29
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05)
5.08 2.54 2.54 2.54
1.0
2.0
6.29
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05) 5.08 2.54 2.54 2.54
1.0
2.0
6.29
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05)
5.08 2.54 2.54
1.0
2.73
7.02
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05) 5.08 2.54 2.54
1.0
2.73
7.02
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05)
5.08 2.54 2.54 2.54
1.0
2.73
7.02
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05) 5.08 2.54 2.54 2.54
1.0
2.73
7.02
(mm)
NOTE. General tolerance :±0.1
(Top view)
(1.05)
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
4
EC2/EE2 SERIES
5
GENERAL SPECIFICATIONS
Contact Form 2 Form C
Contact Material Silver alloy with gold alloy overlay
Contact Ratings
Maximum Switching
Power 60 W, 125 VA
Maximum Switching
Voltage 220 VDC, 250 VAC
Maximum Switching
Current 2 A
Maximum Carrying
Current 2 A
Minimum Contact Ratings 10 m VDC, 10µA *1
Initial Contact Resistance 75 m Ω max. (initial)
Operate Time (Excluding bounce) Approx. 2 ms
Release Time (Excluding bounce) Approx. 1 ms
Insulation Resistance 1000 M Ω at 500 VDC
Withstanding
Voltage
Between open contacts
1000 VAC (for one minute) 1500 V surge (10x160 µs *2)
[High breakdown voltage (NKX) type]
Make contact: 1500 VAC (for one minute) 2500 V surge (2x10 µs *3)
Break contact: 1000 VAC (for one minute) 1500 V surge (10x160 µs *2)
Between adjacent
contacts 1000 VAC (for one minute) 1500 V surge (10x160 µs *2)
Between coil and
contacts
1500 VAC (for one minute) , 2500 V surge (2x10 µs *3)
[Double coil latch type]
1000 VAC (for one minute) 1500 V surge (10x160 µs *2)
Shock Resistance 735 m/s2 (75G) (misoperation)
980 m/s2 (100G) (destructive failure)
Vibration Resistance 10 to 55 Hz, double amplitude 3 mm(20G) (misoperation)
10 to 55 Hz, double amplitude 5 mm(30G) (destructive failure)
Ambient Temperature 40 to 85
Coil Temperature Rise 18 at nominal coil voltage (140mW)
Running
Specifi cations
Nonload 1x108 operations (Non-latch type) *4
1x107 operations (latch type)
Load 50 VDC 0.1A (resistive), 1x106 operations at 85,5Hz
10 VDC 10mA (resistive), 1x106 operations at 85,2Hz
Weight Approx. 1.9 g
*1 This value is a reference value in the resistance load.
Minimum capacity changes depending on switching frequency and environment temperature and the load.
*2 rise time: 10 µs, decay time to half crest: 160 µs
*3 rise time: 2 µs, decay time to half crest: 10 µs
*4 This shows the number of operations with fatal defects. Stable characteristics are maintained for 1×107 operations.
PIN CONFIGURATIONS (Bottom view)
MARKINGS (top view)
Non-latch type
Single coil latch type
Double coil latch type
1 3 4 5
12 10 9 8
Direction mark
S: Coil polarity for Set
R: Coil polarity for Reset
Single coil latch type
(Reset position)
+
S
-
-
R
+
1 3 4 5
12 10 9 8
Direction mark
S: Coil polarity for Set
R: Coil polarity for Reset
Single coil latch type
(Reset position)
+
S
-
-
R
+
1 3 4 5 6
12 10 9 8 7
Direction mark
Double coil latch type
(Reset position)
Set coil Reset coil
+
-
+
-
1 3 4 5 6
12 10 9 8 7
Direction mark
Double coil latch type
(Reset position)
Set coil Reset coil
+
-
+
-
1 3 4 5
12 10 9 8
Non-latch type
(Not energized position)
Direction mark
+
-
1 3 4 5
12 10 9 8
Non-latch type
(Not energized position)
Direction mark
+
-
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
4
EC2/EE2 SERIES
5
GENERAL SPECIFICATIONS
Contact Form 2 Form C
Contact Material Silver alloy with gold alloy overlay
Contact Ratings
Maximum Switching
Power 60 W, 125 VA
Maximum Switching
Voltage 220 VDC, 250 VAC
Maximum Switching
Current 2 A
Maximum Carrying
Current 2 A
Minimum Contact Ratings 10 m VDC, 10µA *1
Initial Contact Resistance 75 m Ω max. (initial)
Operate Time (Excluding bounce) Approx. 2 ms
Release Time (Excluding bounce) Approx. 1 ms
Insulation Resistance 1000 M Ω at 500 VDC
Withstanding
Voltage
Between open contacts
1000 VAC (for one minute) 1500 V surge (10x160 µs *2)
[High breakdown voltage (NKX) type]
Make contact: 1500 VAC (for one minute) 2500 V surge (2x10 µs *3)
Break contact: 1000 VAC (for one minute) 1500 V surge (10x160 µs *2)
Between adjacent
contacts 1000 VAC (for one minute) 1500 V surge (10x160 µs *2)
Between coil and
contacts
1500 VAC (for one minute) , 2500 V surge (2x10 µs *3)
[Double coil latch type]
1000 VAC (for one minute) 1500 V surge (10x160 µs *2)
Shock Resistance 735 m/s2 (75G) (misoperation)
980 m/s2 (100G) (destructive failure)
Vibration Resistance 10 to 55 Hz, double amplitude 3 mm(20G) (misoperation)
10 to 55 Hz, double amplitude 5 mm(30G) (destructive failure)
Ambient Temperature 40 to 85
Coil Temperature Rise 18 at nominal coil voltage (140mW)
Running
Specifi cations
Nonload 1x108 operations (Non-latch type) *4
1x107 operations (latch type)
Load 50 VDC 0.1A (resistive), 1x106 operations at 85,5Hz
10 VDC 10mA (resistive), 1x106 operations at 85,2Hz
Weight Approx. 1.9 g
*1 This value is a reference value in the resistance load.
Minimum capacity changes depending on switching frequency and environment temperature and the load.
*2 rise time: 10 µs, decay time to half crest: 160 µs
*3 rise time: 2 µs, decay time to half crest: 10 µs
*4 This shows the number of operations with fatal defects. Stable characteristics are maintained for 1×107 operations.
PIN CONFIGURATIONS (Bottom view)
MARKINGS (top view)
Except ND type ND type (High insulation)
(1) Part number
(2) Manufacturer
(3) Country of origin
(4) Date code
(5) Direction mark (pin No. 1 and 12)
(6) UL,CSA marking (TUV added for ND type)
0501F
EC2-5NU
JAPAN
(1)
(2)
(5)
(3) (4)
(6)
0501F
EC2-5NU
JAPAN
(1)
(2)
(5)
(3) (4)
(6)
0501F
EC2-5ND
JAPAN
(1)
(2)
(5)
(3) (4)
(6)
0501F
EC2-5ND
JAPAN
(1)
(2)
(5)
(3) (4)
(6)
Non-latch type
Single coil latch type
Double coil latch type
1 3 4 5
12 10 9 8
Direction mark
S: Coil polarity for Set
R: Coil polarity for Reset
Single coil latch type
(Reset position)
+
S
-
-
R
+
1 3 4 5
12 10 9 8
Direction mark
S: Coil polarity for Set
R: Coil polarity for Reset
Single coil latch type
(Reset position)
+
S
-
-
R
+
1 3 4 5 6
12 10 9 8 7
Direction mark
Double coil latch type
(Reset position)
Set coil Reset coil
+
-
+
-
1 3 4 5 6
12 10 9 8 7
Direction mark
Double coil latch type
(Reset position)
Set coil Reset coil
+
-
+
-
1 3 4 5
12 10 9 8
Non-latch type
(Not energized position)
Direction mark
+
-
1 3 4 5
12 10 9 8
Non-latch type
(Not energized position)
Direction mark
+
-
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
6
EC2/EE2 SERIES
7
Non-latch Type at 20
Nominal
Coil Voltage
(VDC)
Coil
Resistance
(Ω)±10%
Must Operate
Voltage*
(VDC)
Must Release
Voltage*
(VDC)
Nominal
Operating Power
(mW)
3 64.3 2.25 0.3 140
4.5 145 3.38 0.45 140
5 178 3.75 0.5 140
9 579 6.75 0.9 140
12 1028 9.0 1.2 140
24 2880 18.0 2.4 200
Single Coil Latch Type at 20
Nominal
Coil Voltage
(VDC)
Coil
Resistance
(Ω)±10%
Set
Voltage*
(VDC)
Reset
Voltage*
(VDC)
Nominal
Operating Power
(mW)
3 90 2.25 2.25 100
4.5 202.5 3.38 3.38 100
5 250 3.75 3.75 100
9 810 6.75 6.75 100
12 1440 9.0 9.0 100
24 5760 18.0 18.0 100
Double Coil Latch Type (Can not be driven by reverse polarity for reverse operation) at 20
Nominal
Coil Voltage
(VDC)
Coil
Resistance
(Ω)±10%
Set
Voltage**
(VDC)
Reset
Voltage**
(VDC)
Nominal
Operating Power
(mW)
3S 64.3 2.25 - 140
R 64.3 - 2.25
4.5 S 145 3.38 - 140
R 145 - 3.38
5S 178 3.75 - 140
R 178 - 3.75
9S 579 6.75 - 140
R 579 - 6.75
12 S 1028 9.0 - 140
R 1028 - 9.0
24 S 4114 18.0 - 140
R 4114 - 18.0
Non-latch High Insulation (ND) Type at 20
Nominal
Coil Voltage
(VDC)
Coil
Resistance
(Ω)±10%
Must Operate
Voltage*
(VDC)
Must Release
Voltage*
(VDC)
Nominal
Operating Power
(mW)
3 45 2.25 0.3 200
4.5 101 3.38 0.45 200
5 125 3.75 0.5 200
9 405 6.75 0.9 200
12 720 9.0 1.2 200
24 2504 18.0 2.4 230
Single Coil Latch High Insulation (ND) Type at 20
Nominal
Coil Voltage
(VDC)
Coil
Resistance
(Ω)±10%
Set
Voltage*
(VDC)
Reset
Voltage*
(VDC)
Nominal
Operating Power
(mW)
3 90 2.25 2.25 100
4.5 203 3.38 3.38 100
5 250 3.75 3.75 100
9 810 6.75 6.75 100
12 960 9.0 9.0 150
24 3388 18.0 18.0 170
Non-latch High Breakdown Voltage (NKX) Type at 20
Nominal
Coil Voltage
(VDC)
Coil
Resistance
(Ω)±10%
Must Operate
Voltage*
(VDC)
Must Release
Voltage*
(VDC)
Nominal
Operating Power
(mW)
3 39.1 2.25 0.3 230
4.5 88.0 3.38 0.45 230
12 626 9.0 1.2 230
Note * Test by pulse voltage
** S : Set coil (pin No.1 ... (+) , pin No.12 ...(-) ) R : Reset coil (pin No.6...(+) , pin No.7...(-) )
The latch type relays should be initialized at appointed position before using, and should be
energized to specifi c polarity by above polarity to avoid wrong operation.
Any special coil requirement, please contact NEC TOKIN for availability.
COIL SPECIFICATIONS
SAFETY STANDARD AND RATING
UL Recognized
(UL508)*
File No E73266
CSA Certifi cated
(CSA C22.2 No14)
File No LR46266
30 VDC, 2 A (Resistive)
110 VDC, 0.3 A (Resistive)
125 VAC, 0.5 A (Resistive)
* Spacing: UL114, UL478
TUV Certifi cate
(IEC61810/ EN61810) (EN61810)
No. R 9750561 No. R 9751153
ND Type
(Non-latch and Single coillatch)
NU,NJ,NUH,NUX Type
(Non-latch and Single coillatch)
Creepage and clearance of coil to contact is more than 2 mm.
(According to EN60950)
Supplementary insulation class Basic insulation class
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
6
EC2/EE2 SERIES
7
Non-latch Type at 20
Nominal
Coil Voltage
(VDC)
Coil
Resistance
(Ω)±10%
Must Operate
Voltage*
(VDC)
Must Release
Voltage*
(VDC)
Nominal
Operating Power
(mW)
3 64.3 2.25 0.3 140
4.5 145 3.38 0.45 140
5 178 3.75 0.5 140
9 579 6.75 0.9 140
12 1028 9.0 1.2 140
24 2880 18.0 2.4 200
Single Coil Latch Type at 20
Nominal
Coil Voltage
(VDC)
Coil
Resistance
(Ω)±10%
Set
Voltage*
(VDC)
Reset
Voltage*
(VDC)
Nominal
Operating Power
(mW)
3 90 2.25 2.25 100
4.5 202.5 3.38 3.38 100
5 250 3.75 3.75 100
9 810 6.75 6.75 100
12 1440 9.0 9.0 100
24 5760 18.0 18.0 100
Double Coil Latch Type (Can not be driven by reverse polarity for reverse operation) at 20
Nominal
Coil Voltage
(VDC)
Coil
Resistance
(Ω)±10%
Set
Voltage**
(VDC)
Reset
Voltage**
(VDC)
Nominal
Operating Power
(mW)
3S 64.3 2.25 - 140
R 64.3 - 2.25
4.5 S 145 3.38 - 140
R 145 - 3.38
5S 178 3.75 - 140
R 178 - 3.75
9S 579 6.75 - 140
R 579 - 6.75
12 S 1028 9.0 - 140
R 1028 - 9.0
24 S 4114 18.0 - 140
R 4114 - 18.0
Non-latch High Insulation (ND) Type at 20
Nominal
Coil Voltage
(VDC)
Coil
Resistance
(Ω)±10%
Must Operate
Voltage*
(VDC)
Must Release
Voltage*
(VDC)
Nominal
Operating Power
(mW)
3 45 2.25 0.3 200
4.5 101 3.38 0.45 200
5 125 3.75 0.5 200
9 405 6.75 0.9 200
12 720 9.0 1.2 200
24 2504 18.0 2.4 230
Single Coil Latch High Insulation (ND) Type at 20
Nominal
Coil Voltage
(VDC)
Coil
Resistance
(Ω)±10%
Set
Voltage*
(VDC)
Reset
Voltage*
(VDC)
Nominal
Operating Power
(mW)
3 90 2.25 2.25 100
4.5 203 3.38 3.38 100
5 250 3.75 3.75 100
9 810 6.75 6.75 100
12 960 9.0 9.0 150
24 3388 18.0 18.0 170
Non-latch High Breakdown Voltage (NKX) Type at 20
Nominal
Coil Voltage
(VDC)
Coil
Resistance
(Ω)±10%
Must Operate
Voltage*
(VDC)
Must Release
Voltage*
(VDC)
Nominal
Operating Power
(mW)
3 39.1 2.25 0.3 230
4.5 88.0 3.38 0.45 230
12 626 9.0 1.2 230
Note * Test by pulse voltage
** S : Set coil (pin No.1 ... (+) , pin No.12 ...(-) ) R : Reset coil (pin No.6...(+) , pin No.7...(-) )
The latch type relays should be initialized at appointed position before using, and should be
energized to specifi c polarity by above polarity to avoid wrong operation.
Any special coil requirement, please contact NEC TOKIN for availability.
COIL SPECIFICATIONS
SAFETY STANDARD AND RATING
UL Recognized
(UL508)*
File No E73266
CSA Certifi cated
(CSA C22.2 No14)
File No LR46266
30 VDC, 2 A (Resistive)
110 VDC, 0.3 A (Resistive)
125 VAC, 0.5 A (Resistive)
* Spacing: UL114, UL478
TUV Certifi cate
(IEC61810/ EN61810) (EN61810)
No. R 9750561 No. R 9751153
ND Type
(Non-latch and Single coillatch)
NU,NJ,NUH,NUX Type
(Non-latch and Single coillatch)
Creepage and clearance of coil to contact is more than 2 mm.
(According to EN60950)
Supplementary insulation class Basic insulation class
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
8
EC2/EE2 SERIES
9
������
EC2 – 3 S NU
オプション
NU:標準型
ND:高絶縁型
コイル動作機能
 無 :ノンラッチング型
S 1巻線ラッチング型
T 2巻線ラッチング型
コイル定格電圧
(定格電圧の数値)
EC2シリーズ
EE2 – 3 S NU – L
包装仕様
 無 :マガジンケース包装
L :テーピングリール包装
オプション
NU :標準型
NUH :高密度実装型
NUX :高接続信頼性型
ND :高絶縁型
NKX :高耐圧、高接続信頼性型
コイル動作機能
 無 :ノンラッチング型
S 1巻線ラッチング型
T 2巻線ラッチング型
コイル定格電圧
(定格電圧の数値)
EE2シリーズ
RECOMMENDED RELAY DRIVE CONDITIONS
Drive under conditions. If it is impossible, please inquire to NEC TOKIN.
Non-latch type Voltage: within ±5% of nominal voltage
Ambient temperature
 -40 to 85
Single coil latch type
Double coil latch type
Square pulse (rise and fall time is rapid)
Pulse height : within ±5% of nominal voltage
Pulse width : More than 10 ms
PART NUMBER SYSTEM
E C 2 - 3 S N U
NU: Standard
NJ: Trimmed lead type
ND: High insulation type
Nil: Non-latch type
S: Single coil latch type
T: Double coil latch type
Nominal coil voltage
(A numerical value of coil voltage)
EC2 series
E E 2 – 3 S N U – L
Packing
Nil: Tube
L: Embossed carrying tape
NU: Standard
NUH: Minimum footprint type
NUX: High solder joint reliability type
ND: High insulation type
NKX: High breakdown voltage and high solder joint reliability type
Nil: Non-latch type
S: Single coil latch type
T: Double coil latch type
Nominal coil voltage
(A numerical value of coil voltage)
EE2 series
ORDERING PART NUMBERS
EC2 series
Option Nominal
Coil Voltage
(VDC)
Coil Type
Terminal Packing Non-latch Single Coil Latch Double Coil Latch
Standard
Tube
3 EC2-3NU EC2-3SNU EC2-3TNU
4.5 EC2-4.5NU EC2-4.5SNU EC2-4.5TNU
5 EC2-5NU EC2-5SNU EC2-5TNU
9 EC2-9NU EC2-9SNU EC2-9TNU
12 EC2-12NU EC2-12SNU EC2-12TNU
24 EC2-24NU EC2-24SNU EC2-24TNU
Trimmed
lead
3 EC2-3NJ EC2-3SNJ EC2-3TNJ
4.5 EC2-4.5NJ EC2-4.5SNJ EC2-4.5TNJ
5 EC2-5NJ EC2-5SNJ EC2-5TNJ
9 EC2-9NJ EC2-9SNJ EC2-9TNJ
12 EC2-12NJ EC2-12SNJ EC2-12TNJ
24 EC2-24NJ EC2-24SNJ EC2-24TNJ
EC2 series High Insulation Type (ND Type)
Option Nominal
Coil Voltage
(VDC)
Coil Type
Terminal Packing Non-latch Single Coil Latch
Standard Tube
3 EC2-3ND EC2-3SND
4.5 EC2-4.5ND EC2-4.5SND
5 EC2-5ND EC2-5SND
9 EC2-9ND EC2-9SND
12 EC2-12ND EC2-12SND
24 EC2-24ND EC2-24SND
EE2 series
Option Nominal
Coil Voltage
(VDC)
Coil Type
Terminal Packing Non-latch Single Coil Latch Double Coil Latch
Standard
Tube
3 EE2-3NU EE2-3SNU EE2-3TNU
4.5 EE2-4.5NU EE2-4.5SNU EE2-4.5TNU
5 EE2-5NU EE2-5SNU EE2-5TNU
9 EE2-9NU EE2-9SNU EE2-9TNU
12 EE2-12NU EE2-12SNU EE2-12TNU
24 EE2-24NU EE2-24SNU EE2-24TNU
Taping
3 EE2-3NU-L EE2-3SNU-L EE2-3TNU-L
4.5 EE2-4.5NU-L EE2-4.5SNU-L EE2-4.5TNU-L
5 EE2-5NU-L EE2-5SNU-L EE2-5TNU-L
9 EE2-9NU-L EE2-9SNU-L EE2-9TNU-L
12 EE2-12NU-L EE2-12SNU-L EE2-12TNU-L
24 EE2-24NU-L EE2-24SNU-L EE2-24TNU-L
Minimum
footprint Tube
3 EE2-3NUH EE2-3SNUH EE2-3TNUH
4.5 EE2-4.5NUH EE2-4.5SNUH EE2-4.5TNUH
5 EE2-5NUH EE2-5SNUH EE2-5TNUH
9 EE2-9NUH EE2-9SNUH EE2-9TNUH
12 EE2-12NUH EE2-12SNUH EE2-12TNUH
24 EE2-24NUH EE2-24SNUH EE2-24TNUH
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
8
EC2/EE2 SERIES
9
������
EC2 – 3 S NU
オプション
NU:標準型
ND:高絶縁型
コイル動作機能
 無 :ノンラッチング型
S 1巻線ラッチング型
T 2巻線ラッチング型
コイル定格電圧
(定格電圧の数値)
EC2シリーズ
EE2 – 3 S NU – L
包装仕様
 無 :マガジンケース包装
L :テーピングリール包装
オプション
NU :標準型
NUH :高密度実装型
NUX :高接続信頼性型
ND :高絶縁型
NKX :高耐圧、高接続信頼性型
コイル動作機能
 無 :ノンラッチング型
S 1巻線ラッチング型
T 2巻線ラッチング型
コイル定格電圧
(定格電圧の数値)
EE2シリーズ
RECOMMENDED RELAY DRIVE CONDITIONS
Drive under conditions. If it is impossible, please inquire to NEC TOKIN.
Non-latch type Voltage: within ±5% of nominal voltage
Ambient temperature
 -40 to 85
Single coil latch type
Double coil latch type
Square pulse (rise and fall time is rapid)
Pulse height : within ±5% of nominal voltage
Pulse width : More than 10 ms
PART NUMBER SYSTEM
E C 2 - 3 S N U
NU: Standard
NJ: Trimmed lead type
ND: High insulation type
Nil: Non-latch type
S: Single coil latch type
T: Double coil latch type
Nominal coil voltage
(A numerical value of coil voltage)
EC2 series
E E 2 3 S N U L
Packing
Nil: Tube
L: Embossed carrying tape
NU: Standard
NUH: Minimum footprint type
NUX: High solder joint reliability type
ND: High insulation type
NKX: High breakdown voltage and high solder joint reliability type
Nil: Non-latch type
S: Single coil latch type
T: Double coil latch type
Nominal coil voltage
(A numerical value of coil voltage)
EE2 series
ORDERING PART NUMBERS
EC2 series
Option Nominal
Coil Voltage
(VDC)
Coil Type
Terminal Packing Non-latch Single Coil Latch Double Coil Latch
Standard
Tube
3 EC2-3NU EC2-3SNU EC2-3TNU
4.5 EC2-4.5NU EC2-4.5SNU EC2-4.5TNU
5 EC2-5NU EC2-5SNU EC2-5TNU
9 EC2-9NU EC2-9SNU EC2-9TNU
12 EC2-12NU EC2-12SNU EC2-12TNU
24 EC2-24NU EC2-24SNU EC2-24TNU
Trimmed
lead
3 EC2-3NJ EC2-3SNJ EC2-3TNJ
4.5 EC2-4.5NJ EC2-4.5SNJ EC2-4.5TNJ
5 EC2-5NJ EC2-5SNJ EC2-5TNJ
9 EC2-9NJ EC2-9SNJ EC2-9TNJ
12 EC2-12NJ EC2-12SNJ EC2-12TNJ
24 EC2-24NJ EC2-24SNJ EC2-24TNJ
EC2 series High Insulation Type (ND Type)
Option Nominal
Coil Voltage
(VDC)
Coil Type
Terminal Packing Non-latch Single Coil Latch
Standard Tube
3 EC2-3ND EC2-3SND
4.5 EC2-4.5ND EC2-4.5SND
5 EC2-5ND EC2-5SND
9 EC2-9ND EC2-9SND
12 EC2-12ND EC2-12SND
24 EC2-24ND EC2-24SND
EE2 series
Option Nominal
Coil Voltage
(VDC)
Coil Type
Terminal Packing Non-latch Single Coil Latch Double Coil Latch
Standard
Tube
3 EE2-3NU EE2-3SNU EE2-3TNU
4.5 EE2-4.5NU EE2-4.5SNU EE2-4.5TNU
5 EE2-5NU EE2-5SNU EE2-5TNU
9 EE2-9NU EE2-9SNU EE2-9TNU
12 EE2-12NU EE2-12SNU EE2-12TNU
24 EE2-24NU EE2-24SNU EE2-24TNU
Taping
3 EE2-3NU-L EE2-3SNU-L EE2-3TNU-L
4.5 EE2-4.5NU-L EE2-4.5SNU-L EE2-4.5TNU-L
5 EE2-5NU-L EE2-5SNU-L EE2-5TNU-L
9 EE2-9NU-L EE2-9SNU-L EE2-9TNU-L
12 EE2-12NU-L EE2-12SNU-L EE2-12TNU-L
24 EE2-24NU-L EE2-24SNU-L EE2-24TNU-L
Minimum
footprint Tube
3 EE2-3NUH EE2-3SNUH EE2-3TNUH
4.5 EE2-4.5NUH EE2-4.5SNUH EE2-4.5TNUH
5 EE2-5NUH EE2-5SNUH EE2-5TNUH
9 EE2-9NUH EE2-9SNUH EE2-9TNUH
12 EE2-12NUH EE2-12SNUH EE2-12TNUH
24 EE2-24NUH EE2-24SNUH EE2-24TNUH
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
10
EC2/EE2 SERIES
11
PERFORMANCE DATA
Minimum
footprint Taping
3 EE2-3NUH-L EE2-3SNUH-L EE2-3TNUH-L
4.5 EE2-4.5NUH-L EE2-4.5SNUH-L EE2-4.5TNUH-L
5 EE2-5NUH-L EE2-5SNUH-L EE2-5TNUH-L
9 EE2-9NUH-L EE2-9SNUH-L EE2-9TNUH-L
12 EE2-12NUH-L EE2-12SNUH-L EE2-12TNUH-L
24 EE2-24NUH-L EE2-24SNUH-L EE2-24TNUH-L
High solder
joint reliability
Tube
3 EE2-3NUX EE2-3SNUX EE2-3TNUX
4.5 EE2-4.5NUX EE2-4.5SNUX EE2-4.5TNUX
5 EE2-5NUX EE2-5SNUX EE2-5TNUX
9 EE2-9NUX EE2-9SNUX EE2-9TNUX
12 EE2-12NUX EE2-12SNUX EE2-12TNUX
24 EE2-24NUX EE2-24SNUX EE2-24TNUX
Taping
3 EE2-3NUX-L EE2-3SNUX-L EE2-3TNUX-L
4.5 EE2-4.5NUX-L EE2-4.5SNUX-L EE2-4.5TNUX-L
5 EE2-5NUX-L EE2-5SNUX-L EE2-5TNUX-L
9 EE2-9NUX-L EE2-9SNUX-L EE2-9TNUX-L
12 EE2-12NUX-L EE2-12SNUX-L EE2-12TNUX-L
24 EE2-24NUX-L EE2-24SNUX-L EE2-24TNUX-L
EE2 series High Insulation Type (ND Type)
Option Nominal
Coil Voltage
(VDC)
Coil Type
Terminal Packing Non-latch Single Coil Latch
Standard
Tube
3 EE2-3ND EE2-3SND
4.5 EE2-4.5ND EE2-4.5SND
5 EE2-5ND EE2-5SND
9 EE2-9ND EE2-9SND
12 EE2-12ND EE2-12SND
24 EE2-24ND EE2-24SND
Taping
3 EE2-3ND-L EE2-3SND-L
4.5 EE2-4.5ND-L EE2-4.5SND-L
5 EE2-5ND-L EE2-5SND-L
9 EE2-9ND-L EE2-9SND-L
12 EE2-12ND-L EE2-12SND-L
24 EE2-24ND-L EE2-24SND-L
EE2 series High Breakdown Voltage Type (NKX Type)
Option Nominal
Coil Voltage
(VDC)
Coil Type
Terminal Packing Non-latch
High solder
joint reliability
Tube
3 EE2-3NKX
4.5 EE2-4.5NKX
12 EE2-12NKX
Taping
3 EE2-3NKX-L
4.5 EE2-4.5NKX-L
12 EE2-12NKX-L
0 100 200 300
60
40
20
0
App
lied
p
ower
(
mW
)
0 5 10 15 20
30
20
10
0
A
pplied time (minute)
-40 -20 0 20 40 60 80 100
200
150
100
50
A
mbient tem
p
erature
()
10 20 50 100
2.0
1.0
0.5
0.2
0.1
Contact volta
g
e
(
V
)
0 100 150 200 250
0
A
pplied power (mW)
1
2
3
4
0 100 200 300 400
0
A
pplied power (mW)
1
2
3
4
COIL TEMPERATURE RISE
Tem
p
erature is measured b
y
coil resistance
SWITCHING CAPACITY
These are maximum value.
Inquire with NEC TOKIN for maximum values under continuous
MAXIMUM COIL VOLTAGE
This is a maximum value of permissible alteration.
Inquire with NEC TOKIN under continuous use.
APPLIED VOLTAGE VS. TIMING (Sample:EE2-5NU)
(
Without coil diode
)
DC(Resistive)
AC(Resistive)
250VAC
220VDC
A
pplied power 0.1W
A
pplied power 0.14W
A
pplied power 0.2W
Coil temperature
rise ()
Coil temperature
rise ()
Contact
current (A)
Ratio o
f
nominal
coil
voltage
(%)
Operate
time
(ms)
Release
time
(ms)
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
10
EC2/EE2 SERIES
11
PERFORMANCE DATA
Minimum
footprint Taping
3 EE2-3NUH-L EE2-3SNUH-L EE2-3TNUH-L
4.5 EE2-4.5NUH-L EE2-4.5SNUH-L EE2-4.5TNUH-L
5 EE2-5NUH-L EE2-5SNUH-L EE2-5TNUH-L
9 EE2-9NUH-L EE2-9SNUH-L EE2-9TNUH-L
12 EE2-12NUH-L EE2-12SNUH-L EE2-12TNUH-L
24 EE2-24NUH-L EE2-24SNUH-L EE2-24TNUH-L
High solder
joint reliability
Tube
3 EE2-3NUX EE2-3SNUX EE2-3TNUX
4.5 EE2-4.5NUX EE2-4.5SNUX EE2-4.5TNUX
5 EE2-5NUX EE2-5SNUX EE2-5TNUX
9 EE2-9NUX EE2-9SNUX EE2-9TNUX
12 EE2-12NUX EE2-12SNUX EE2-12TNUX
24 EE2-24NUX EE2-24SNUX EE2-24TNUX
Taping
3 EE2-3NUX-L EE2-3SNUX-L EE2-3TNUX-L
4.5 EE2-4.5NUX-L EE2-4.5SNUX-L EE2-4.5TNUX-L
5 EE2-5NUX-L EE2-5SNUX-L EE2-5TNUX-L
9 EE2-9NUX-L EE2-9SNUX-L EE2-9TNUX-L
12 EE2-12NUX-L EE2-12SNUX-L EE2-12TNUX-L
24 EE2-24NUX-L EE2-24SNUX-L EE2-24TNUX-L
EE2 series High Insulation Type (ND Type)
Option Nominal
Coil Voltage
(VDC)
Coil Type
Terminal Packing Non-latch Single Coil Latch
Standard
Tube
3 EE2-3ND EE2-3SND
4.5 EE2-4.5ND EE2-4.5SND
5EE2-5ND EE2-5SND
9 EE2-9ND EE2-9SND
12 EE2-12ND EE2-12SND
24 EE2-24ND EE2-24SND
Taping
3 EE2-3ND-L EE2-3SND-L
4.5 EE2-4.5ND-L EE2-4.5SND-L
5 EE2-5ND-L EE2-5SND-L
9 EE2-9ND-L EE2-9SND-L
12 EE2-12ND-L EE2-12SND-L
24 EE2-24ND-L EE2-24SND-L
EE2 series High Breakdown Voltage Type (NKX Type)
Option Nominal
Coil Voltage
(VDC)
Coil Type
Terminal Packing Non-latch
High solder
joint reliability
Tube
3 EE2-3NKX
4.5 EE2-4.5NKX
12 EE2-12NKX
Taping
3 EE2-3NKX-L
4.5 EE2-4.5NKX-L
12 EE2-12NKX-L
0 100 200 300
60
40
20
0
App
lied
p
ower
(
mW
)
0 5 10 15 20
30
20
10
0
A
pplied time (minute)
-40 -20 0 20 40 60 80 100
200
150
100
50
A
mbient tem
p
erature
()
10 20 50 100
2.0
1.0
0.5
0.2
0.1
Contact volta
g
e
(
V
)
0 100 150 200 250
0
A
pplied power (mW)
1
2
3
4
0 100 200 300 400
0
A
pplied power (mW)
1
2
3
4
COIL TEMPERATURE RISE
Tem
p
erature is measured b
y
coil resistance
SWITCHING CAPACITY
These are maximum value.
Inquire with NEC TOKIN for maximum values under continuous
MAXIMUM COIL VOLTAGE
This is a maximum value of permissible alteration.
Inquire with NEC TOKIN under continuous use.
APPLIED VOLTAGE VS. TIMING (Sample:EE2-5NU)
(
Without coil diode
)
DC(Resistive)
AC(Resistive)
250VAC
220VDC
A
pplied power 0.1W
A
pplied power 0.14W
A
pplied power 0.2W
Coil temperature
rise ()
Coil temperature
rise ()
Contact
current (A)
Ratio o
f
nominal
coil
voltage
(%)
Operate
time
(ms)
Release
time
(ms)
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
12
EC2/EE2 SERIES
13
Operations (×104)
5
4
3
2
1
0
Operations (×104)
0 20 50 100 500 1000
10000
1000
100
10
5
4
3
2
1
0
0 2 5 10 50 100
-40 -20 0 20 40 60 80 100
100
80
60
40
20
0
A
mbient temperature ()
OPERATE AND RELEASE VOLTAGE VS.AMBIENT TEMPERATURE
This shows a typical change of operate (release) voltage. The value of must operate is estimated, so coil voltage must be applied
more than this value for safety operation. For hot start operation, please inquire with NEC TOKIN.
RUNNING TEST (Non load)
(Load: none, Drive:5VDC50Hz50%duty, Ambient temperature :room temperature, Sample:EE2-5NU ,20pieces)
Operate voltage
R
e
l
ease
v
o
l
tage
RUNNING TEST(Load)
(Load:50VDC 0.1A resistive,Drive:5VDC,5Hz,50%duty,Ambient temperature:85, Sample:EE2-5NU ,10pieces)
Must operate voltage
Operate voltage (typical)
Release volta
g
e
(
t
yp
ical
)
Ratio of nominal
coil voltage (%)
0 20 50 100 500 1000
10000
1000
100
10
Contact
resistance
(m)
Operate
voltage
(V)
Release
voltage
(V)
Contact
resistance
(m)
Operate
voltage
(V)
voltage
(V)
Release
0 2 5 10 50 100
Operations (×104)
Operations (×104)
Operate voltage
Release voltage
a b c d e
f
+40
+30
+20
+10
0
-10
-20
-30
-40
Mountin
g
la
y
out
+40
+30
+20
+10
0
-10
-20
-30
-40
Mounting layout
100
50
0 0.5 1.0 1.5 2.0
Breakdown voltage (K V)
100
50
0 1.0 1.5 2.0 2.5
100
50
0 0.5 1.5 2.0 2.5
BREAKDOWN VOLTAGE
Sample: EC2-5NU 10peices
(a) Between open contacts
(
b
)
Between ad
j
acent contacts
(C) Between coil and contact
ALTERNATION OF VOLTAGE IN DENSE MOUNTING (Magnetic interference)
A
lternation of operate voltage
Distribution
Distribution
(
%
)
Di
s
tri
bu
ti
o
n
(%)
Breakdown voltage (K V)
Breakdown voltage (K V)
Ratio of
alternation (%)
ON ON OFF OFF
ON
ON
OFF
OFF
ON
ON
ON
OFF
OFF
OFF
e
f
Device under test
a b c d
a b c d e
f
Ratio of
alternation (%)
A
lternation of operate voltage
2.54mm
2.54
mm
2.54
mm
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
12
EC2/EE2 SERIES
13
Operations (×104)
5
4
3
2
1
0
Operations (×104)
0 20 50 100 500 1000
10000
1000
100
10
5
4
3
2
1
0
0 2 5 10 50 100
-40 -20 0 20 40 60 80 100
100
80
60
40
20
0
A
mbient temperature ()
OPERATE AND RELEASE VOLTAGE VS.AMBIENT TEMPERATURE
This shows a typical change of operate (release) voltage. The value of must operate is estimated, so coil voltage must be applied
more than this value for safety operation. For hot start operation, please inquire with NEC TOKIN.
RUNNING TEST (Non load)
(Load: none, Drive:5VDC50Hz50%duty, Ambient temperature :room temperature, Sample:EE2-5NU ,20pieces)
Operate voltage
R
e
l
ease
v
o
l
tage
RUNNING TEST(Load)
(Load:50VDC 0.1A resistive,Drive:5VDC,5Hz,50%duty,Ambient temperature:85, Sample:EE2-5NU ,10pieces)
Must operate voltage
Operate voltage (typical)
Release volta
g
e
(
t
yp
ical
)
Ratio of nominal
coil voltage (%)
0 20 50 100 500 1000
10000
1000
100
10
Contact
resistance
(m)
Operate
voltage
(V)
Release
voltage
(V)
Contact
resistance
(m)
Operate
voltage
(V)
voltage
(V)
Release
0 2 5 10 50 100
Operations (×104)
Operations (×104)
Operate voltage
Release voltage
a b c d e
f
+40
+30
+20
+10
0
-10
-20
-30
-40
Mountin
g
la
y
out
+40
+30
+20
+10
0
-10
-20
-30
-40
Mounting layout
100
50
0 0.5 1.0 1.5 2.0
Breakdown voltage (K V)
100
50
0 1.0 1.5 2.0 2.5
100
50
0 0.5 1.5 2.0 2.5
BREAKDOWN VOLTAGE
Sample: EC2-5NU 10peices
(a) Between open contacts
(
b
)
Between ad
j
acent contacts
(C) Between coil and contact
ALTERNATION OF VOLTAGE IN DENSE MOUNTING (Magnetic interference)
A
lternation of operate voltage
Distribution
Distribution
(
%
)
Di
s
tri
bu
ti
o
n
(%)
Breakdown voltage (K V)
Breakdown voltage (K V)
Ratio of
alternation (%)
ON ON OFF OFF
ON
ON
OFF
OFF
ON
ON
ON
OFF
OFF
OFF
e
f
Device under test
a b c d
a b c d e
f
Ratio of
alternation (%)
A
lternation of operate voltage
2.54mm
2.54
mm
2.54
mm
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
14
EC2/EE2 SERIES
15
TUBE PACKING (EC2/EE2)
35 pieces / Tube (anti-static)
TAPE PACKING (EE2)
APPEARANCE Number of storage: 500 pieces / Reel
Reel diameter: 380mm
TAPE DIMENSIONS
A B
EE2-xxNU-L
EE2-xxND-L
EE2-xxNUX-L
EE2-xxNKX-L
Max.10.9 10.0
EE2-xxNUH-L Max.11.1 8.0
RELAY DIRECTION MARK AND TAPE CARRYING DIRECTION
Reel
Top cover tape
Emboss
Carrying tape
Reel
Top cover tape
Emboss
Carrying tape
11.9 543
15.5
Rubber stopper (Red)
Direction of relay direction mark
Rubber stopper (Green)
11.9 543
15.5
Rubber stopper (Red)
Direction of relay direction mark
Rubber stopper (Green)
24.0
4
Φ1.5
Φ2.2
16
11.5
2.0 1.75
B
0.4
A
15.5
24.0
4
Φ1.5
Φ2.2
16
11.5
2.0 1.75
B
0.4
A
15.5
Direction mark
Sprocket hole
Direction of unreeling
Direction mark
Sprocket hole
Direction of unreeling
THROUGH-HOLE MOUNTING (EC2)
1. Automatic soldering
Preheating: 110~ 120 /110 sec. (max.)
Solder temperature: 260 max.
Solder time: 5 seconds max.
Note: NEC TOKIN recommends cooling down a printed circuit board
less than 110 within 40 seconds after soldering.
2. Manual soldering
Solder temperature: 350 max.
Solder time: 3 seconds max.
SURFACE-MOUNTING TYPE (EE2)
IRS Method
Note:
1. Temperature profile shows printed circuit board surface temperature on the relay
terminal portion.
2. Check the actual soldering condition to use other method except above mentioned
temperature profiles.
200
180
190 (max.300)
45 (max.70)
70 (max.120)
Temperature
()
220
max. 240
Time (sec.)
200
180
190 (max.300)
45 (max.70)
70 (max.120)
Temperature
()
220
max. 240
Time (sec.)
PACKING DIMENSION (Unit: mm) SOLDERING TEMPERATURE CONDITION
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
14
EC2/EE2 SERIES
15
TUBE PACKING (EC2/EE2)
35 pieces / Tube (anti-static)
TAPE PACKING (EE2)
APPEARANCE Number of storage: 500 pieces / Reel
Reel diameter: 380mm
TAPE DIMENSIONS
A B
EE2-xxNU-L
EE2-xxND-L
EE2-xxNUX-L
EE2-xxNKX-L
Max.10.9 10.0
EE2-xxNUH-L Max.11.1 8.0
RELAY DIRECTION MARK AND TAPE CARRYING DIRECTION
Reel
Top cover tape
Emboss
Carrying tape
Reel
Top cover tape
Emboss
Carrying tape
11.9 543
15.5
Rubber stopper (Red)
Direction of relay direction mark
Rubber stopper (Green)
11.9 543
15.5
Rubber stopper (Red)
Direction of relay direction mark
Rubber stopper (Green)
24.0
4
Φ1.5
Φ2.2
16
11.5
2.0 1.75
B
0.4
A
15.5
24.0
4
Φ1.5
Φ2.2
16
11.5
2.0 1.75
B
0.4
A
15.5
Direction mark
Sprocket hole
Direction of unreeling
Direction mark
Sprocket hole
Direction of unreeling
THROUGH-HOLE MOUNTING (EC2)
1. Automatic soldering
Preheating: 110~ 120 /110 sec. (max.)
Solder temperature: 260 max.
Solder time: 5 seconds max.
Note: NEC TOKIN recommends cooling down a printed circuit board
less than 110 within 40 seconds after soldering.
2. Manual soldering
Solder temperature: 350 max.
Solder time: 3 seconds max.
SURFACE-MOUNTING TYPE (EE2)
IRS Method
Note:
1. Temperature profile shows printed circuit board surface temperature on the relay
terminal portion.
2. Check the actual soldering condition to use other method except above mentioned
temperature profiles.
200
180
190 (max.300)
45 (max.70)
70 (max.120)
Temperature
()
220
max. 240
Time (sec.)
200
180
190 (max.300)
45 (max.70)
70 (max.120)
Temperature
()
220
max. 240
Time (sec.)
PACKING DIMENSION (Unit: mm) SOLDERING TEMPERATURE CONDITION
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
16
EC2/EE2 SERIES
17
1. Notes on contact load
Make sure that the contact load is within the specifi ed range;
otherwise, the lifetime of the contacts will be shortened
considerably.
Note that the running performance shown is an example, and
that it varies depending on parameters such as the type of
load, switching frequency, driver circuit, and ambient
temperature under the actual operating conditions.
Evaluate the performance by using the actual circuit before
using the relay.
2. Driving relays
- If the internal connection diagram of a relay shows + and -
symbols on the coil, apply the rated voltage to the relay in the
specified direction. If a rippled DC current source is used,
abnormalities such as beat at the coil may occur.
- The maximum voltage that can be applied to the coil of the
relay varies depending on the ambient temperature.
Generally, the higher the voltage applied to the coil, the shorter
the operating time. Note, however, that a high voltage also
increases the bounce of the contacts and the contact opening
and closing frequency, which may shorten the lifetime of the
contacts.
- If the driving voltage waveform of the relay coil rises and falls
gradually, the inherent performance of the relay may not be
fully realized. Make sure that the voltage waveform
instantaneously rises and falls as a pulse.
- For a latching relay, apply a voltage to the coil according to
the polarity specifi ed in the internal connection diagram of the
relay.
- If a current is applied to the coil over a long period of time,
the coil temperature rises, promoting generation of organic gas
inside the relay, which may result in faulty contacts. In this
case, use of a latching relay is recommended.
- The operating time and release time indicate the time
required for each contact to close after the voltage has been
applied to or removed from the coil. However, because the
relay has a mechanical structure, a bounce state exists at the
end of the operating and release times. Furthermore, because
additional time is required until the contact stabilizes after
being in a high-resistance state, care must be taken when
using the relay at high speeds.
3. Operating environment
- Make sure that the relay mounted in the application set is
used within the specifi ed temperature range. Use of a relay at
a temperature outside this range may adversely affect
insulation or contact performance.
- If the relay is used for a long period of time in highly humid
(RH 85% or higher) environment, moisture may be absorbed
into the relay. This moisture may react with the NOx and SOx
generated by glow discharges that occur when the contacts
are opened or closed, producing nitric or sulfuric acid. If this
happens, the acid produced may corrode the metallic parts of
the relay, causing operational malfunction.
- If any material containing silicon (silicon rubber, silicon oil,
and silicon based coating material) is used in the neighborhood
of relay, there is some possibility that these materials will emit
silicon gas that will penetrate the relay. In this case, the
switching contact may generate silicon compounds on the
surface of contacts. This silicon compound may result in
contact failure. Avoid use of relay in such an environment.
- Because the operating temperature range varies depending
on the humidity, use the relay in the temperature range
illustrated in the figure below. Prevent the relay from being
frozen and avoid the generation of condensation.
- The relay maintains constant sealability under normal
atmospheric pressure (810 to 1,200 hpa). Its sealability may be
degraded or the relay may be deformed and malfunction if it is
used under barometric conditions exceeding the specified
range.
- The same applies when the relay is stored or transported.
Keep the upper-limit value of the temperature to which the
relay is exposed after it is removed from the carton box to
within 50.
- Permanent magnets are used in polarized relays. For this
reason, when magnets, transformers, or speakers are located
nearby the relay characteristics may change and faulty
operations may result.
- If excessive vibration or shock is applied to the relay, it may
malfunction and the contacts remain closed. Vibration or shock
applied to the relay during operation may cause considerable
damage to or wearing of the contacts. Note that operation of a
snap switch mounted close to the relay or shock due to the
operation of magnetic solenoid may also cause malfunctioning.
NOTE ON CORRECT USE
Nominal
coil voltage
0
<1msec. <1msec.
-60 -40 -20 0 20 40 60 80 100
80
Temperature (
)
60
40
20
85
5
Humidit
y
(%RH)
4. Notes on mounting relays
- When mounting a relay onto a PC board using an automatic
chip mounter, if excessive force is applied to the cover of the
relay when the relay is chucked or inserted, the cover may be
damaged or the characteristics of the relay degraded. Keep the
force applied to the relay to within 1 kg.
- Avoid bending the pins to temporarily secure the relay to the
PC board. Bending the pins may degrade sealability or
adversely affect the internal mechanism.
- It is recommended to solder the relay onto a PC board under
the following conditions:
<1> Refl ow soldering
Refer to the recommended soldering temperature profi le.
<2> Flow soldering
Solder temperature: 260 max., Time: 5 seconds max.
Preheating: 110~ 120 /110 sec. (max.)
<3> Manual soldering
Solder temperature: 350, Time: 2~3 seconds
- Ventilation immediately after soldering is recommended.
Avoid immersing the relay in cleaning solvent immediately after
soldering due to the danger of thermal shock being applied to
the relay.
- Use an alcohol-based or water-based cleaning solvent. Never
use thinner and benzene because they may damage the relay
housing.
- Do not use ultrasonic cleaning because the vibration energy
generated by the ultrasonic waves may cause the contacts to
remain closed.
5. Handling
- Relays are packaged in magazine cases for shipment. If a
space is created in the case after some relays have been
removed, be sure to insert a stopper to secure the remaining
relays in the case. If relays are not well secured, vibration
during transportation may cause malfunctioning of the
contacts.
- Exercise care in handling the relay so as to avoid dropping it
or allowing it to fall. Do not use a relay that has been dropped.
If a relay drops from a workbench to the oor, a shock of 9,800
m/s2 (1,000 G) or more is applied to the relay, possibly
damaging its functions. Even if a light shock has been applied
to the relay, thoroughly evaluate its operation before using it.
- Latching relays are factory-set to the reset state for shipment.
A latching relay may be set, however, by vibration or shock
applied while being transported. Be sure to forcibly reset the
relay before using it in the application set. Also note that the
relay may be set by unexpected vibration or shock when it is
used in a portable set.
- The sealability of a surface-mount (SMT) relay may be lost if
the relay absorbs moisture and is then heated during soldering.
When storing relays, therefore, observe the following points:
<1> For standard packing, please use relays within 12 months
after delivery. (Storage conditions: 30 / 60% RH)
If the relays have moisture absorption, dehumidify as follows.
Tape packing: 50 ±5, 200~300 hours.
Simple relay: 85 ±5, 48 hours.
<2> For MBB packing, please use relays within 2 years after
delivery.
(Storage conditions: 30 / 60% RH)
After open MBB packing, please use within 3 months.
(Storage conditions: 30 / 60% RH)
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
16
EC2/EE2 SERIES
17
1. Notes on contact load
Make sure that the contact load is within the specifi ed range;
otherwise, the lifetime of the contacts will be shortened
considerably.
Note that the running performance shown is an example, and
that it varies depending on parameters such as the type of
load, switching frequency, driver circuit, and ambient
temperature under the actual operating conditions.
Evaluate the performance by using the actual circuit before
using the relay.
2. Driving relays
- If the internal connection diagram of a relay shows + and -
symbols on the coil, apply the rated voltage to the relay in the
specified direction. If a rippled DC current source is used,
abnormalities such as beat at the coil may occur.
- The maximum voltage that can be applied to the coil of the
relay varies depending on the ambient temperature.
Generally, the higher the voltage applied to the coil, the shorter
the operating time. Note, however, that a high voltage also
increases the bounce of the contacts and the contact opening
and closing frequency, which may shorten the lifetime of the
contacts.
- If the driving voltage waveform of the relay coil rises and falls
gradually, the inherent performance of the relay may not be
fully realized. Make sure that the voltage waveform
instantaneously rises and falls as a pulse.
- For a latching relay, apply a voltage to the coil according to
the polarity specifi ed in the internal connection diagram of the
relay.
- If a current is applied to the coil over a long period of time,
the coil temperature rises, promoting generation of organic gas
inside the relay, which may result in faulty contacts. In this
case, use of a latching relay is recommended.
- The operating time and release time indicate the time
required for each contact to close after the voltage has been
applied to or removed from the coil. However, because the
relay has a mechanical structure, a bounce state exists at the
end of the operating and release times. Furthermore, because
additional time is required until the contact stabilizes after
being in a high-resistance state, care must be taken when
using the relay at high speeds.
3. Operating environment
- Make sure that the relay mounted in the application set is
used within the specifi ed temperature range. Use of a relay at
a temperature outside this range may adversely affect
insulation or contact performance.
- If the relay is used for a long period of time in highly humid
(RH 85% or higher) environment, moisture may be absorbed
into the relay. This moisture may react with the NOx and SOx
generated by glow discharges that occur when the contacts
are opened or closed, producing nitric or sulfuric acid. If this
happens, the acid produced may corrode the metallic parts of
the relay, causing operational malfunction.
- If any material containing silicon (silicon rubber, silicon oil,
and silicon based coating material) is used in the neighborhood
of relay, there is some possibility that these materials will emit
silicon gas that will penetrate the relay. In this case, the
switching contact may generate silicon compounds on the
surface of contacts. This silicon compound may result in
contact failure. Avoid use of relay in such an environment.
- Because the operating temperature range varies depending
on the humidity, use the relay in the temperature range
illustrated in the figure below. Prevent the relay from being
frozen and avoid the generation of condensation.
- The relay maintains constant sealability under normal
atmospheric pressure (810 to 1,200 hpa). Its sealability may be
degraded or the relay may be deformed and malfunction if it is
used under barometric conditions exceeding the specified
range.
- The same applies when the relay is stored or transported.
Keep the upper-limit value of the temperature to which the
relay is exposed after it is removed from the carton box to
within 50.
- Permanent magnets are used in polarized relays. For this
reason, when magnets, transformers, or speakers are located
nearby the relay characteristics may change and faulty
operations may result.
- If excessive vibration or shock is applied to the relay, it may
malfunction and the contacts remain closed. Vibration or shock
applied to the relay during operation may cause considerable
damage to or wearing of the contacts. Note that operation of a
snap switch mounted close to the relay or shock due to the
operation of magnetic solenoid may also cause malfunctioning.
NOTE ON CORRECT USE
Nominal
coil voltage
0
<1msec. <1msec.
-60 -40 -20 0 20 40 60 80 100
80
Temperature (
)
60
40
20
85
5
Humidit
y
(%RH)
4. Notes on mounting relays
- When mounting a relay onto a PC board using an automatic
chip mounter, if excessive force is applied to the cover of the
relay when the relay is chucked or inserted, the cover may be
damaged or the characteristics of the relay degraded. Keep the
force applied to the relay to within 1 kg.
- Avoid bending the pins to temporarily secure the relay to the
PC board. Bending the pins may degrade sealability or
adversely affect the internal mechanism.
- It is recommended to solder the relay onto a PC board under
the following conditions:
<1> Refl ow soldering
Refer to the recommended soldering temperature profi le.
<2> Flow soldering
Solder temperature: 260 max., Time: 5 seconds max.
Preheating: 110~ 120 /110 sec. (max.)
<3> Manual soldering
Solder temperature: 350, Time: 2~3 seconds
- Ventilation immediately after soldering is recommended.
Avoid immersing the relay in cleaning solvent immediately after
soldering due to the danger of thermal shock being applied to
the relay.
- Use an alcohol-based or water-based cleaning solvent. Never
use thinner and benzene because they may damage the relay
housing.
- Do not use ultrasonic cleaning because the vibration energy
generated by the ultrasonic waves may cause the contacts to
remain closed.
5. Handling
- Relays are packaged in magazine cases for shipment. If a
space is created in the case after some relays have been
removed, be sure to insert a stopper to secure the remaining
relays in the case. If relays are not well secured, vibration
during transportation may cause malfunctioning of the
contacts.
- Exercise care in handling the relay so as to avoid dropping it
or allowing it to fall. Do not use a relay that has been dropped.
If a relay drops from a workbench to the oor, a shock of 9,800
m/s2 (1,000 G) or more is applied to the relay, possibly
damaging its functions. Even if a light shock has been applied
to the relay, thoroughly evaluate its operation before using it.
- Latching relays are factory-set to the reset state for shipment.
A latching relay may be set, however, by vibration or shock
applied while being transported. Be sure to forcibly reset the
relay before using it in the application set. Also note that the
relay may be set by unexpected vibration or shock when it is
used in a portable set.
- The sealability of a surface-mount (SMT) relay may be lost if
the relay absorbs moisture and is then heated during soldering.
When storing relays, therefore, observe the following points:
<1> For standard packing, please use relays within 12 months
after delivery. (Storage conditions: 30 / 60% RH)
If the relays have moisture absorption, dehumidify as follows.
Tape packing: 50 ±5, 200~300 hours.
Simple relay: 85 ±5, 48 hours.
<2> For MBB packing, please use relays within 2 years after
delivery.
(Storage conditions: 30 / 60% RH)
After open MBB packing, please use within 3 months.
(Storage conditions: 30 / 60% RH)
●All specications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specication sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2012.09.12 9600SD2VOL02E1209H0
EC2/EE2 SERIES
18
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC TOKIN Corporation. NEC TOKIN Corporation assumes no responsibility for any errors which may
appear in this document.
NEC TOKIN Corporation does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a device described herein or any other liability arising
from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights
or other intellectual property rights of NEC TOKIN Corporation or others. While NEC TOKIN Corporation has
been making continuous effort to enhance the reliability of its electronic components, the possibility of defects
cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in
an NEC TOKIN electronic component, customers must incorporate suffi cient safety measures in its design, such
as redundancy, re-containment, and anti-failure features. NEC TOKIN devices are classifi ed into the following
three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices
developed based on a customer designated "quality assurance program" for a specific application. The
recommended applications of a device depend on its quality grade, as indicated below. Customers must check
the quality grade of each device before using it in a particular application.
Standard: Computers, offi ce equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment and
industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifi cally designed for
life support)
Specifi c: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support
systems or medical equipment for life support, etc.
The quality grade of NEC TOKIN devices is "Standard" unless otherwise specifi ed in NEC TOKIN's Data Sheets
or Data Books. If customers intend to use NEC TOKIN devices for applications other than those specifi ed for
Standard quality grade, they should contact an NEC TOKIN sales representative in advance.
(Note)
(1) "NEC TOKIN" as used in this statement means NEC TOKIN Corporation and also includes its majority owned
subsidiaries.
(2) "NEC TOKIN electronic component products" means any electronic component product developed or
manufactured by or for NEC TOKIN (as defi ned above).