Sensors SA1C-FK PLCs OI Touchscreens Fiber Optic Analog: SA1C-FK Key features: Power Supplies Automation Software * High-speed, miniature photoelectric sensors with analog (4 - 20mA) and digital output * Senses gradual color changes * Available in red or green LEDs * Through-beam and reflected-light sensing available * Ideal for either color mark applications or simple presence and absence applications requiring analog output * Compact size allows for DIN rail mounting * Fiber optic units available to address specific application needs * Simple to install * IP66 protection rating Built on the foundation of SA1C-F, SA1C-FK is ideal for either color mark applications or simple presence and absence applications requiring analog output. Sensors Featuring analog and digital output, this sensor comes in through-beam or reflected-light sensing styles. Part Numbers Function Light Source Element Output Part Number Red LED SA1C-FK3 Analog output + NPN output SA1C-FK3G Function is determined by the fiber optic unit used. Barriers Communication Green LED 196 www.IDEC.com For information on accessories, see page 203. Sensors SA1C-FK Specifications Sensing Distance SA1C-FK3G Red LED - Green LED - Depends on the fiber unit (see page 204) 12 to 24V DC (Operating voltage: 10 to 30V DC) ripple 10% maximum 80mA maximum Analog Current Output 4 to 20mA, 5V DC maximum 1 Digital Output NPN open collector 30V DC, 100mA maximum,1.5V maximum with short circuit protection Operation Mode Dark ON (connect MODE line to GND line) Light ON (connect MODE line to power line) Response 0.5ms maximum 2 Indicator Operation LED: Red, Stable LED: Green Detectable Object Translucent object, opaque object 20% maximum (using reflex fiber unit) 4-turn adjustment Operation Point Control 1 turn Receiver Element Photo diode Operating Temperature -25 to +55C (performance will be adversely affected if the sensor becomes coated with ice) Storage Temperature -30 to +70C (performance will be adversely affected if the sensor becomes coated with ice) 35 to 85% RH (avoid condensation) Sunlight: 10,000 lux maximum; Incandescent light: 3,000 lux (at the receiver) Noise Resistance Normal mode: 500V (50ns to 1s, 100Hz: Using a noise simulator) Common mode: 300V (50ns to 1s, 100Hz: Using a noise simulator) Insulation Resistance Between live and dead parts: 20M minimum, with 500V DC megger Between live and dead parts: 1,000V, 1 minute Damage limits: 10 to 55Hz; Single amplitude: 0.75mm 20 cycles in each of 3 axes Shock Resistance Damage limits: 500 m/sec2 10 cycles in each of 3 axes Degree of Protection IP66--IEC Pub 529 Cable O4.4mm 5-core vinyl cabtyre cable 0.2mm2, 6'-6-3/4" (2m) long Material Housing: PBT Accessories Mounting bracket, adjusting screwdriver, load resistor (249) for converting analog amperage to voltage (1 to 5V) Interference Prevention Up to 2 units can be installed in close proximity. For analog output, interference prevention is not possible. Weight Approximately 75g Sensors Dielectric Strength Vibration Resistance Power Supplies Operating Humidity Extraneous Light Immunity Automation Software Hysteresis Sensitivity PLCs Power Voltage Current Draw OI Touchscreens Light Source Element SA1C-FK3 1. Analog current output specification is based on the power voltage range from 12 to 24V DC (10%). Use the attached resistor (249, 1/4W) as a load resistance for converting analog output to voltage. 2. Response time for analog current output is between 10% and 90% of the rise or fall of the voltage signal when using a 249 resistor. Communication Dimensions (mm) Mounting Hole Layout o4.4 x 2m Panel Mounting Bracket (attachment) Not required for DIN Rail mounting Barriers (when using a panel mounting bracket) Receiver Emitter holes 800-262-IDEC (4332) * USA & Canada 197 Barriers Communication Sensors Power Supplies Automation Software PLCs OI Touchscreens SA1C-FK 198 Sensors Applications www.IDEC.com Sensors Accessories Slits Reflectors Appearance Item Use with Standard reflector Part Number IAC-R6 Large reflector IAC-R8 SA1E IAC-R7B Tape (35 x 40mm) IAC-RS1 Tape (70 x 80mm) IAC-RS2 Standard IAC-R9 SA1E-X Ultra-small IAC-R10 Use with 0.5mm x 18mm SA9Z-S06 1.0mm x 18mm SA9Z-S07 2.0mm x 18mm SA9Z-S08 0.5mm x 6.5mm Horizontal slit 1.0mm x 6.5mm Round slit Part Number SA9Z-S09 SA1E SA9Z-S10 2.0mm x 6.5mm SA9Z-S11 o0.5mm SA9Z-S12 o1.0mm SA9Z-S13 o2.0mm SA9Z-S14 Appearance Number of Core Wires IAC-R11 Type & Length Use with Part No. Straight, 2m SA9Z-CM8K-4S2 Straight, 5m 4 Use with Part Number SA9Z-K01 Horizontal mounting bracket SA9Z-K02 Cover mounting bracket SA9Z-K03 Back mounting bracket SA9Z-K04 4 photo not available Right angle, 2m SA9Z-CM8K-4S5 SA1E SA9Z-CM8K-4L2 Right angle, 5m SA9Z-CM8K-4L5 2m SA9C-CA4D2 5m SA9C-CA4D5 SA1C-F 2m Power Supplies Vertical mounting bracket 2 Connector Cables (for connector model sensors) Brackets Item Min. Order Qty Automation Software Narrow (rear mounting) Slit Size PLCs IAC-R7S Item Vertical slit IAC-R7M Narrow (side mounting) Small Appearance IAC-R5 Small reflector Narrow (rear/side mounting) Appearance OI Touchscreens Accessories SA9C-CA4D2S 5m SA9C-CA4D5S Air Blower Mounting Blocks Appearance Item Use with Part Number Air blower mounting block SA1E SA9Z-A02 SA1E IAC-L2 Reflector mounting bracket IAC-L3 Reflector mounting bracket IAC-L5 Sensors Sensitivity Control Screwdriver Item Part No. Communication photo not available Reflector mounting bracket Package Quantity Sensitivity Control Screwdriver SA9Z-AD01 1 Barriers 800-262-IDEC (4332) * USA & Canada 203 Sensors Accessories Appearance Part Number Description Use with Range SA9F-DS31 No sleeve SA9F-DS32 3.54" (90mm) sleeve SA9F-DS33 1.77" (45mm) sleeve Straight: Two fibers o1mm (0.04") Threaded mount: o6mm (M6) Detects: o0.03mm (0.0012") minimum object SA1C-FK3 SA1C-FK3G SA1C-F 60mm (2.36") 7mm (0.28") SA9F-DC31 No sleeve SA9F-DC32 3.54" (90mm) sleeve SA9F-DC33 1.77" (45mm) sleeve (All three not compatible with green LED) Coiled: Two fibers o1mm (0.04") Threaded mount: o6mm (M6) Detects: o0.03mm (0.0012") minimum object SA1C-FK3 SA1C-FK3G SA1C-F 25mm (0.98") -- SA9F-DT11 No sleeve SA9F-DT12 3.54" (90mm) sleeve SA9F-DT13 1.77" (45mm) sleeve (All three not compatible with green LED) Straight: Two fibers o0.5mm (0.02") Threaded mount: o3mm (M3) Detects: o0.03mm (0.0012") minimum object SA1C-FK3 SA1C-FK3G SA1C-F 20mm (0.78") -- SA9F-DD31 Coaxial: Core o1mm (0.04") + 16 fibers: o0.26mm (0.01") Threaded mount: o6mm (M6) Detects: o0.03mm (0.0012") minimum object SA1C-FK3 SA1C-FK3G SA1C-F 60mm (2.36") 7mm (0.28") SA9F-DM74 1 row = 32 fibers SA9F-DM75 2 rows = 16 each (Not compatible with green LED) Multicore: 32 fibers o0.26mm (0.010") Detects: o0.06mm (0.0024") minimum object SA1C-FK SA1C-FK3G SA1C-F 60mm (2.36") 4mm (0.16") SA9F-DH21 No sleeve SA9F-DH22 3.54" (90mm) sleeve (Both not compatible with green LED) Heat-resistant glass: Two fibers o0.7mm (0.03") Threaded mount: o4mm (M4) Detects: o0.03mm (0.0012") minimum object SA1C-FK3 SA1C-FK3G SA1C-F 27mm (1.06" ) -- Barriers Communication Sensors Power Supplies Automation Software PLCs OI Touchscreens Diffuse-Reflected Light Fiber Optic Units - SA9F 204 www.IDEC.com (not compatible with SA9F-DM75, SA9F-DM76) Sensors Accessories Through-Beam Fiber Optic Units - SA9F Part Number Amplifier Range Straight fiber: o1mm (0.04") Threaded mount: o4mm (M4) Detects: o0.3mm (0.012") minimum object SA1C-FK3 SA1C-FK3G SA1C-F 180mm (7.09") 16mm (0.63") SA9F-TC21 No sleeve Coiled fiber: o1mm (0.04") Threaded mount: o4mm (M4) Detects: o0.3mm (0.012") minimum object SA1C-FK3 SA1C-FK3G SA1C-F 150mm (5.91") 14mm (0.55") SA9F-TT11 No sleeve Straight fiber: o0.5mm (0.02") Threaded mount: o3mm (M3) Detects: o0.15mm (0.006") minimum object SA1C-FK3 SA1C-FK3G SA1C-F 50mm (1.97") 5mm (0.2") SA9F-TM21 No sleeve SA9F-TM22 3.54" (90mm) sleeve SA9F-TM23 1.77" (45mm) sleeve 16 fibers (cluster) Multicore: o0.26mm (0.010") Threaded mount: o4mm (M4) Detects: o0.3mm (0.012") minimum object SA1C-FK3 SA1C-FK3G SA1C-F 150mm (5.91") 14mm (0.55") SA9F-TM74 16 fibers in one row Multicore: 16 fibers (one row) o0.26mm (0.010") Detects: o0.06mm (0.0024") minimum object SA1C-FK3 SA1C-FK3G SA1C-F 150mm (5.91") 14mm (0.55") SA9F-TH21 No sleeve SA9F-TH22 3.54" (90mm) sleeve Heat-resistant glass fiber: o1mm (0.04") Threaded mount: o4mm (M4) Detects: o0.3mm (0.012") minimum object SA1C-FK3 SA1C-FK3G SA1C-F 100mm (3.94") 8mm (0.31") SA9F-TS21 No sleeve SA9F-TS23 1.77" (45mm) sleeve PLCs Description OI Touchscreens Appearance Automation Software Power Supplies Sensors Communication Barriers 800-262-IDEC (4332) * USA & Canada 205 Sensors Accessories OI Touchscreens Miscellaneous Accessories Description Use with Part Number Fiber cutter All fiber units except heat resistant HxLxD: 23x 45 x 8mm (0.91" x 1.77" x 0.31") Included with fiber units; order replacement only SA9Z-F01 Set of 2 easy-insert adaptors SA9F-TT, SA9F-TL, SA9F-DT, and SA9F-DL o2.2 x 24mm long (o0.087" (OD) x 0.945") Included with applicable fiber optic units; order replacement set only SA9Z-F02 Power Supplies Automation Software PLCs SA1C-F through-beam fiber unit only Lens attachment for long-range detection of opaque objects, minimum size: O 0.14" (3.5mm) Sensing ranges: Standard speed red LED: SA9F-TS21: 1.3m (4' - 3-3/16") SA9F-TC21: 1m (3' - 3-3/8") 0.1m (3.94") SA9F-TM21: 1.05m (3' - 5-3/8") Sensing ranges: Standard speed green LED: SA9F-TS21: 0.135m (5.31") SA9F-TC21: 0.1m (3.94") SA9F-TM21: 0.13m (5.12") SA9Z-F11 Sensing ranges: High-speed red LED: SA9F-TS21: 0.4m (5.75") SA9F-TC21: 0.3m (1.81") SA9F-TM21: 0.38m (4.96") SA1C-F through-beam fiber unit only Side view attachment to rotate axis by 90 for detection of opaque objects, minimum size: O 0.14" (3.5mm) Side-on attachment for narrow clearance, Range: 1.26" (32mm), for detection of transparent or opaque objects Sensing ranges: Standard speed red LED: SA9F-TS21: 200mm (7.87") SA9F-TC21: 130mm (5.12") SA9F-TM21: 160mm (6.30") SA9Z-F12 Sensing ranges: High-speed red LED: SA9F-TS21: 50mm (1.97") SA9F-TC21: 35mm (1.38") SA9F-TM21: 40mm (1.57") SA1C-F diffuse-reflected light fiber unit only Sensing ranges: Standard speed red LED: SA9F-TS21: 35mm (1.38") SA9F-TC21: 30mm (1.81") SA9F-TM21: 35mm (1.38") SA9Z-F13 SA1C-F through-beam fiber unit only Sensing ranges: Standard speed red LED: SA9F-TS21: SA9F-TC21: SA9F-TM21: 10mm 1mm (0.394" 0.039") Barriers Communication Sensors Attachment for high-accuracy: Range: 0.4" 0.04" (10mm 1mm), for detection of transparent or opaque objects 206 www.IDEC.com SA9Z-F14 Sensors Accessories OI Touchscreens Accessory Dimensions (mm) Mounting Bracket SA9Z-K01 With Mounting Bracket PLCs Automation Software SA9Z-K02 With Mounting Bracket Power Supplies Sensors Communication Barriers 800-262-IDEC (4332) * USA & Canada 207 Sensors Accessories OI Touchscreens SA9Z-K03 Automation Software PLCs With Mounting Bracket SA9Z-K04 30 25 5 7 t=1.2 25.4 24 10.8 24.8 13.4 7 32 Material: Stainless Steel Reflector IAC-R5 IAC-R6 2-o4.3 4 8 72 60 42.3 34.3 Sensors 25 Communication 8.3 35.3 (21) Power Supplies 28.4 19.5 1.6 7 3.4 3.2 14 8 With Mounting Bracket 3.3 2-o3.6 (Effective reflecting area: 30 x 31) 51 3 9 Material: PMMA (reflector), ABS (base) (Effective reflecting area: 47.2 x 47.2) Barriers Material: PMMA (reflector), ABS (base) 208 www.IDEC.com Sensors IAC-RS1 IAC-RS2 70 35 Thickness = 0.5 mm 2-o4.5 Material: PMMA 8 (Effective reflecting area: 47 x 47) PLCs 30 40 80 30.4 40 61 51.2 51.2 OI Touchscreens Reflector IAC-R8 Accessories Material: PMMA (reflector), ABS (base) Thickness = 0.5 mm Material: PMMA IAC-R7M (rear/side mounting) IAC-R7B (rear mounting) 12.4 Positioning Projection (o3.0 mm, height 1.0 mm) 12.4 12.4 2-7.3 M3 tapping screw hole (o2.6 mm, depth 7.7 mm) Material: PMMA (reflector), ABS (base) Material: PMMA (reflector), ABS (base) 25.4 Material: PMMA (reflector), ABS (base) Effective reflecting area: 8.6 x 29.5 The mounting plate for reflector must be 0.8 to 2.5 mm in thickness. IAC-R9 2-M3 tapping screw hole (o2.6 mm, depth 8.6 mm) 2-7.3 11.5 33.3 11.5 M3 tapping screw hole (o2.6 mm, depth 7.7 mm) Power Supplies 2-7.3 12.4 3.0 25.4 33.3 3.0 2-M3 tapping screw hole (o2.6 mm, depth 8.6 mm) IAC-R7S (side mounting) Positioning Projection (o3.0 mm, height 1.0 mm) 33.3 12.4 Automation Software 12.4 IAC-R10 IAC-R11 2-o7 2-o3.8 26 32 5 60 50 4.4 Sensors 61.6 51 2-o4.4 6.1 3.1 2-R2.2 20 40 51.6 2-R2.2 (Reflecting surface 47x47.6) Material: PMMA (reflector), ABS (base) 3.5 6.1 20.2 2 3.2 19.4 Material: PMMA (reflector), ABS (base) Communication (Reflecting surface 38.5x16) (Reflecting surface 18x18.2) Material: PMMA (reflector), ABS (base) Barriers 800-262-IDEC (4332) * USA & Canada 209 Sensors Reflector Mounting Bracket IAC-L2 (for IAC-R5) IAC-L3 (for IAC-R6) IAC-L5 (for IAC-R8) 19 6 40 25 4.5 10 4-o4.4 11 11 37 16 18 (3) 6.1 Slit 0.3 Connector Cable (connector on one end) Straight (SA9Z-CM8K-4S) Part No. Slight Width: A SA9Z-S06 0.5 mm SA9Z-S07 1.0 mm SA9Z-S08 2.0 mm Right-angle (SA9Z-CM8K-4L) o9.6 White Black White Blue Brown Blue Brown 28 Black 16.5 32 Sensors o9.6 20 26 (28) 8-M3 x 0.7 holes Material: SPCC (zinc plating) Material: Stainless Steel o5.2 o5.2 Barriers Dielectric strength when installed on the SA1E: 1000V AC (between live part and mounting bracket, except between live part and tightening ring) 210 7 12 1.6 Material: SPCC (zinc plating) 32.1 18 Power Supplies 8.2 A 20 8-M3 x 0.5 holes Material: SPCC (zinc chromate plating, black) 15 35 44 16 10 6 8 58 2 Automation Software 70 113 35 25 (2) 74 60 50 40 61 PLCs 2-o3.4 Slit (Vertical Slit) SA9Z0S06, -S07, -S08 Communication 4.5 10 30 (3) 28 42 5.5 OI Touchscreens Accessories www.IDEC.com Sensors Accessories 8.0 14.0 With Mounting Bracket (3.2) .2 17.4 P0.8 42.5 37.0 25.4 M5 19.5 PLCs (3.8) 2- o3 SA1E- 6.9 Recommended mounting bracket (SA9Z-K01) Air Blower Mounting Block Automation Software 25.0 6.5 5.8 3.5 6.5 * The SA9Z-A02 air blower mounting block is supplied with two mounting screws (M3 x 20 mm sems screws), one 2.0 screw for plugging the air supply port (M5 x 6 mm), and one gasket for plugging the air supply port. Plugging screws * An air tube fitting (M5) can be installed to either the top or for air supply port side. Tighten the fitting to a torque of 0.5 N*m maximum. (M5), Gasket * The air tube fitting and mounting bracket are not supplied (used on one side only) and must be ordered separately (recommended mounting bracket: SA9Z-K01). 31.5 P0.8 10.9 M5 Air supply port 8.0 14.0 3.4 OI Touchscreens Air Blower Mounting Block (Material: Anodized aluminum surface) Diffuse-Reflective Light Fiber Optic Units SA9F-DS31 SA9F-DS32, SA9F-DS33 M6 P=0.45 M6 P=0.75 Power Supplies SA9F-DC31 SA9F-DC32, SA9F-DC33 M6 P=0.75 M6 P=0.75 Sensors Straight SA9F-DT11 SA9F-DT12, SA9F-DT13 M3 P=0.5 Communication M3P=0.5 Barriers 800-262-IDEC (4332) * USA & Canada 211 Sensors Diffuse-Reflective Light Fiber Optic Units con't SA9F-DD31 Dimensions (mm) SA9F-DM74 M6 P=0.75 . OI Touchscreens Accessories PLCs 2-o 3 hole .2 moun s ting SA9F-DM75 s Automation Software . m ole 2m h 3. ing - o unt 2 o m SA9F-DH21 Power Supplies M4 P0.7 SA9F-DH22 Sensors M4 P0.7 2 - mounting screws SA9F-TS23 2 - mounting screws washer Barriers Communication SA9F-TS21 212 www.IDEC.com washer Sensors Accessories Diffuse-Reflective Light Fiber Optic Units con't OI Touchscreens SA9F-TC21 Dimensions (mm) SA9F-TT11 (straight) 2 - mounting screws 2 - mounting screws washer washer PLCs SA9F-TM21 washer 2 - mounting screws SA9F-TM74 Automation Software 2 - mounting screws SA9F-TM22, SA9F-TM23 washer SA9F-TH21 2 - o3.2mm mounting holes Power Supplies Sensors Communication Barriers 800-262-IDEC (4332) * USA & Canada 213