CERAMIC CHIP CAPACITORS
CATALOG 5001 REV. F
Presidio Components has been an industry leader in
the manufacture of ceramic capacitors since 1980. We
are dedicated to excellence in manufacturing, process
control and customer service. All products are
manufactured and tested in our state-of-the-art, 40,000
square foot facility in San Diego, California, allowing for
immediate response to your business needs. We have
numerous patents, and hundreds of years of combined
engineering experience, and we can formulate the right
product for your application. At Presidio Components
we work hard to build positive, long term relationships
with our customers and we will go the extra distance to
ensure customer satisfaction.
Standard & Custom Products
If you cannot find a part anywhere else, call Presidio
Components. With more than 70 million parts in
inventory, we have many commercial and military parts
in stock. If you have a custom application, call the
factory. Our custom products include nonstandard part
sizes and voltages, including high voltage, high
temperature, high “Q”, custom leads,
cryogenic ceramics, negative and positive
temperature characteristic ceramics and
piezoelectric formulations. We have a series
of patented microwave and radio frequency
products including patented single layer and
broadband DC blocking caps.
Diverse Markets
Presidio Components provides ceramic capacitors for
high quality commercial, military, space and implant
medical applications. Our customers manufacture
products such as aircraft, missile guidance systems,
switch mode power supplies, phased array radar, high
frequency transponders and receivers, ring laser gyros,
and cochlear implants.
QPL Products & DSCC Approved Test Lab
Presidio Components was initially qualified to MIL-
PRF-55681 in 1984. Since then we have upgraded
our processing line to obtain the highest established
reliability rating of “S” level. We are also qualified on
two additional space level specifications, MIL-PRF-
123 and MIL-PRF-49470 “T” level. And, Presidio
Components is proud to be the first QPL supplier to
MIL-PRF-49467, the high voltage ceramic capacitor
specification. All QPL testing per MIL-STD-202 is
done on site at our DSCC approved test lab. For a list
of environmental test capability, consult the factory.
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
2
PRESIDIO COMPONENTS, INC.
OUTSTANDING
CUSTOMER SERVICE
AND
EXPERIENCE YOU CAN TRUST
For more information about
Presidio’s products or the name of
your local sales representative
visit our website at:
www.presidiocomponents.com Presidio’s Website Home Page
Commercial and High Reliability “HR” Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
HighReliability“CR”Capacitors............................................6-7
HighReliability“SR”Capacitors............................................8-9
ExtendedRangeCapacitors...............................................10
LowInductanceCapacitors................................................10
NPQ–HighQDielectricCapacitors.........................................11
High Voltage “HV” Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
OtherAvailableSizes ....................................................13
MIL-PRF-55681 CDR Chip Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
TABLE OF CONTENTS
HR 0805 BX 103 K2 P 3A
HR
CR
SR
HV
HT
Dielectric
Code
Capacitance
Code
Tolerance
Code
Voltage
Code
Termination
Code
Special
Code
NPQ
NPO
N2T
BX
X7R
Y5V
Example 100 = 10 pF
101 = 100 pF
102 = 1000 pF
104 = .10 μF
105 = 1.0 μF
B = ±.10 pF < 10 pF (NPO only)
C = ±.25 pF < 10 pF (NPO only)
D = ±.50 pF < 10 pF (NPO only)
F = ±1% (NPO only)
G = ±2% (NPO only)
J = ±5%
K = ±10%
M = ±20%
Z = + 80% / - 20%
P = + 100% / - 0%
10V = 10 VDC
12V = 12 VDC
16V = 16 VDC
1 = 25 VDC
2 = 50 VDC
3= 100 VDC
4 = 200 VDC
5 = 300 VDC
6= 500 VDC
7= 600 VDC
8 = 750 VDC
9 = 1000 VDC
10 = 1500 VDC
11 = 2000 VDC
12 = 2500 VDC
13 = 3000 VDC
14 = 4000 VDC
15 = 5000 VDC
P = Palladium Silver
NT 9 = 90/10
Tin/Lead over Nickel
NG = Gold over Nickel
1. Reel, 7", plastic tape, unmarked
2. Reel, 7", plastic tape, marked
3. Bulk, unmarked
4. Bulk, marked
5. Waffle, unmarked
6. Waffle, marked
A. Reel, 13", plastic tape, unmarked
B. Reel, 13", plastic tape, marked
C. Reel, 7", paper, unmarked
(0402 & 0603 only)
D. Reel, 13", paper, marked
(0402 & 0603 only)
Add "A" for
non-standard
dimensions.
CDR01 BX 472 BKMR
MILITARY STYLE
VOLTAGE TEMPERATURE LIMITS
CAPACITANCE
FAILURE RATE
TERMINATION FINISH
CAPACITANCE TOLERANCE
RATED VOLTAGE
Prefix
Size Code
EXAMPLE: HR0805BX103K2P3A
HOW TO ORDER A STANDARD PART
HOW TO ORDER A MILITARY PART
EXAMPLE: CDR01BX472BKMR
No prefix required
for commercial parts.
See part number
examples on
following pages.
See tables
for sizes..
Two significant
figures followed by
the number of zeros. Marking and Packaging
Consult
website
for electrical
characterics.
3
Consult factory for other voltages, capacitance options and parts outside a given range.
See MIL-PRF-55681 on pages 14-15 for details.
QUALITY ASSURANCE PROVISIONS
Every lot undergoes the following inspection and tests:
a) Capacitance — All parts are tested at 25°C and
1VACRMS in accordance with Method 305 of MIL-STD-
202. Y5V and low voltage parts follow EIA guidelines.
b) Dissipation Factor (DF) — See following table:
c) Dielectric Withstanding Voltage (DWV) — All parts are
tested to EIA/MIL standards.
d) Insulation Resistance (IR @ 25°C) — All parts are tested
at 25°C and rated voltage in accordance with Method 302
of MIL-STD-202. The minimum IR required is 100,000
megohms or 1,000 megohm-microfarads.
e) Visual — Performed on pieces in accordance with
Presidio internal workmanship criteria.
f) Mechanical — Level 1 AQL 1% in accordance with
this catalog.
g) Operating Temperature Range: –55°C to +125°C
COMMERCIAL CAPACITORS
Presidio provides high quality ceramic capacitors for a wide variety of commercial applications. Every component
must pass the test criteria listed below.
QUALITY ASSURANCE PROVISIONS
Every lot undergoes the following inspection and tests:
a) Voltage Conditioning — All parts receive a voltage
conditioning at 2X rated voltage and 125°C for a minimum
of 8 hours. An accelerated voltage conditioning, following
MIL-PRF-55681 guidelines, may be used at Presidio’s
discretion.
b) Capacitance — All parts are tested at 25°C and
1VACRMS in accordance with Method 305 of MIL-STD-
202.
c) Dissipation Factor (DF) — See following table:
d) Dielectric Withstanding Voltage (DWV) — All parts are
tested at 2.5X rated voltage in accordance with Method
301 of MIL-STD-202, or according to EIA/MIL Standards.
e) Insulation Resistance (IR @ 25°C) — All parts are tested
at 25°C and rated voltage in accordance with Method 302
of MIL-STD-202. The minimum IR required is 100,000
megohms or 1,000 megohm-microfarads.
f) Visual — Performed on pieces in accordance with
Presidio internal workmanship criteria.
g) Mechanical — Level 1 AQL 1% in accordance with this
catalog.
h) Element Evaluation (optional) — A MIL-PRF-38534
Appendix C Passive Element Class H element evaluation
is available where the customer requires this testing.
Element evaluation is not required on each lot, and must
be specified on the purchase order.
i) Operating Temperature Range: –55°C to +125°C
CERTIFICATE OF COMPLIANCE
A Certificate of Compliance will be sent with each shipment.
Visit Presidio’s website for additional
technical information on these products.
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
EXAMPLE PART NUMBER
0805BX103K2P3
See Page 3
“HOW TO ORDER A STANDARD PART”
HIGH RELIABILITY “HR” CAPACITORS
For applications where reliability, but not full military screening is required, Presidio recommends its high reliability
“HR” capacitors. The “HR” code signifies use of the test program below, or the use of a customer Source Control
Document (SCD) that includes voltage conditioning.
4
EXAMPLE PART NUMBER
HR0805BX103K2P3
Add “HR” to the beginning of the standard
Presidio part number. See Page 3
“HOW TO ORDER A STANDARD PART”
Voltage Rating NPO BX X7R Y5V
10 N/A 2.5% 5% 10%
16/25 .15% 2.5% 3.5% 7%
≥50 .15% 2.5% 2.5% 5%
Voltage Rating NPO BX X7R Y5V
10 N/A 2.5% 5% 10%
16/25 .15% 2.5% 3.5% 7%
≥50 .15% 2.5% 2.5% 5%
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
EXAMPLE: HR0805BX103K2P3
HOW TO ORDER
HR 0805 BX 103 K2P3
*Prefix
Size Code
Dielectric Code
Capacitance Code
Special Code
Marking and Packaging
Te r mination Code
Voltage Code
Tolerance Code
5
SIZE
L
inches (mm)
W
inches (mm)
THICKNESS
MAX. (T)
inches (mm)
METALIZATION
BAND (M.B.)
inches (mm)
WVDC NPO BX X7R Y5V
0402
0.040 (1.02)
±
0.004 (0.10)
0.020 (0.51)
±
0.004 (0.10)
0.024
(0.61)
0.004 (0.10)
min. band
0.015 (0.38)
min. space
10 V 390 pF 6800 pF 0.012 μF 0.047 μF
16 V 200 pF 3300 pF 6800 pF 0.027 μF
25 V 120 pF 2200 pF 4700 pF 0.018 μF
50 V 100 pF 1800 pF 3900 pF 0.012 μF
100 V 39 pF 680 pF 1200 pF 5600 pF
0403
0.040 (1.02)
±
0.010 (0.25)
0.030 (0.76)
±
0.010 (0.25)
0.030
(0.76)
0.004 (0.10)
min. band
0.015 (0.38)
min. space
10 V 1200 pF 0.020 μF 0.047 μF 0.12 μF
16 V 560 pF 0.012 μF 0.022 μF 0.068 μF
25 V 390 pF 6800 pF 0.015 μF 0.047 μF
50 V 330 pF 5600 pF 0.012 μF 0.033 μF
100 V 68 pF 1000 pF 2200 pF 6800 pF
0504
0.050 (1.27)
±
0.010 (0.25)
0.040 (1.02)
±
0.010 (0.25)
0.040
(1.02)
0.005 (0.13)
min. band
0.015 (0.38)
min. space
10 V 2700 pF 0.068 μF 0.12 μF 0.39 μF
16 V 1800 pF 0.039 μF 0.082 μF 0.22 μF
25 V 1500 pF 0.027 μF 0.047 μF 0.12 μF
50 V 1200 pF 0.020 μF 0.039 μF 0.082 μF
100 V 180 pF 2700 pF 6800 pF 0.018 μF
0603
0.063 (1.60)
±
0.006 (0.15)
0.032 (0.81)
±
0.006 (0.15)
0.035
(0.89)
0.005 (0.13)
min. band
0.025 (0.64)
min. space
10 V 2200 pF 0.039 μF 0.10 μF 0.22 μF
16 V 1000 pF 0.020 μF 0.043 μF 0.12 μF
25 V 680 pF 0.015 μF 0.027 μF 0.082 μF
50 V 560 pF 0.010 μF 0.022 μF 0.056 μF
100 V 100 pF 1800 pF 3300 pF 0.010 μF
0805
0.080 (2.03)
±
0.010 (0.25)
0.050 (1.27)
±
0.010 (0.25)
0.050
(1.27)
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
10 V 4700 pF 0.1 μF 0.22 μF 0.68 μF
16 V 3300 pF 0.075 μF 0.15 μF 0.47 μF
25 V 2700 pF 0.047 μF 0.10 μF 0.27 μF
50 V 2200 pF 0.039 μF 0.10 μF 0.18 μF
100 V 560 pF 8200 pF 0.022 μF 0.056 μF
1206
0.126 (3.20)
±
0.008 (0.20)
0.063 (1.60)
±
0.008 (0.20)
0.059
(1.50)
10 V 0.012 μF 0.25 μF 0.56 μF 1.8 μF
16 V 8200 pF 0.2 μF 0.39 μF 1.2 μF
25 V 6800 pF 0.15 μF 0.27 μF 0.82 μF
50 V 5600 pF 0.1 μF 0.22 μF 0.56 μF
100 V 1500 pF 0.027 μF 0.068 μF 0.18 μF
200 V 820 pF 0.012 μF 0.027 μF
1209
0.125 (3.18)
±
0.010 (0.25)
0.095 (2.41)
±
0.010 (0.25)
0.065
(1.65)
10 V 0.018 μF 0.39 μF 0.82 μF 2.5 μF
16 V 0.012 μF 0.27 μF 0.68 μF 1.8 μF
25 V 0.010 μF 0.22 μF 0.47 μF 1.5 μF
50 V 8200 pF 0.18 μF 0.39 μF 1.2 μF
100 V 3900 pF 0.068 μF 0.15 μF 0.47 μF
200 V 1800 pF 0.033 μF 0.068 μF
1712
0.175 (4.45)
±
0.013 (0.33)
0.125 (3.18)
±
0.010 (0.25)
0.065
(1.65)
10 V 0.039 μF 0.82 μF 1.8 μF 5.6 μF
16 V 0.027 μF 0.56 μF 1.2 μF 3.9 μF
25 V 0.022 μF 0.47 μF 1.0 μF 2.7 μF
50 V 0.015 μF 0.27 μF 0.68 μF 1.8 μF
100 V 6800 pF 0.12 μF 0.27 μF 0.82 μF
200 V 3300 pF 0.056 μF 0.12 μF
1725
0.175 (4.45)
±
0.013 (0.33)
0.250 (6.35)
±
0.018 (0.46)
0.065
(1.65)
10 V 0.082 μF 2.0 μF 3.9 μF 12.0 μF
16 V 0.068 μF 1.5 μF 3.3 μF 8.2 μF
25 V 0.056 μF 1.2 μF 2.2 μF 6.8 μF
50 V 0.039 μF 0.82 μF 1.8 μF 4.7 μF
100 V 0.018 μF 0.33 μF 0.68 μF 2.0 μF
200 V 8200 pF 0.12 μF 0.27 μF
2225
0.220 (5.59)
±
0.015 (0.38)
0.250 (6.35)
±
0.018 (0.46)
0.080
(2.03)
10 V 0.10 μF 2.2 μF 4.7 μF 15.0 μF
16 V 0.082 μF 1.8 μF 3.9 μF 12.0 μF
25 V 0.068 μF 1.5 μF 3.3 μF 10.0 μF
50 V 0.056 μF 1.0 μF 2.2 μF 6.8 μF
100 V 0.027 μF 0.47 μF 1.0 μF 2.7 μF
200V 0.012 μF 0.22 μF 0.47 μF
DIELECTRIC
HR
COMMERCIAL AND HIGH RELIABILITY “HR” CAPACITORS
*No prefix required for
commercial parts.
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
QUALITY ASSURANCE PROVISIONS
Every lot undergoes the following inspection and tests:
a) Destructive Physical Analysis (DPA) — A 32-piece
sample is pulled from each lot and examined per relevant
sections of EIA 469 and to verify adherence to Presidio’s
internal design criteria.
b) Voltage Conditioning — All parts receive a voltage
conditioning at 2X rated voltage and 125°C for 100 hours.
An accelerated voltage conditioning, following MIL-PRF-
55681 guidelines, may be used at Presidio’s discretion.
c) Capacitance — All parts are tested at 25°C and
1VACRMS in accordance with method 305 of MIL-STD-202.
d) Dissipation Factor (DF) — See following table:
e) Dielectric Withstanding Voltage (DWV) — All parts are
tested at 2.5X rated voltage in accordance with Method
301 of MIL-STD-202, or according to EIA/MIL Standards.
f) Insulation Resistance (IR @ 25°C) — All parts are tested
at 25°C and rated voltage in accordance with Method 302
of MIL-STD-202. The minimum IR required is 100,000
megohms or 1,000 megohm-microfarads.
g) Percent Defective Allowed (PDA) — The cumulative
PDA after voltage conditioning is 8%. Pieces rejected as out
of tolerance for capacitance or visual screening will be
removed from the lot but not counted in the PDA calculation.
h) Visual — Performed on pieces in accordance with
Presidio internal workmanship criteria.
i) Mechanical — Level 1 AQL 1% in accordance with
this catalog.
j) Class H Element Evaluation (optional) — A MIL-PRF-
38534 Appendix C Passive Element Class H element
evaluation is available where the customer requires this
testing. Element evaluation is not required on each lot,
and must be specified on the purchase order.
k) Operating Temperature Range: –55°C to +125°C
STANDARD PACKAGING
Product will be packaged in individual waffle trays.
DATA PACKAGE
Data will be sent with each shipment including:
a) Destructive Physical Analysis Report (optional) —
Destructive Physical Analysis (DPA) report and photographs
for each lot. Extra charge may apply.
b) Certificate of Compliance — A Certificate of
Compliance will be sent with each shipment.
c) Class H Element Evaluation — If a Class H element
evaluation is required, all variables test data for subgroup
3 tests will be included in the data package.
HIGH RELIABILITY “CR” CAPACITORS
(TESTED SIMILARLY TO MIL-PRF-55681)
For applications that require a high level of reliability, Presidio recommends its high reliability “CR” capacitors. Tested
similarly to MIL-PRF-55681 Group A, Presidio manufactures these chips on the same manufacturing line as its military
product line. They may be used in both military and space applications. Please note these capacitors are NOT MIL-qualified.
6
EXAMPLE PART NUMBER
CR0805BX103K2P3
Add “CR” to the beginning of the standard
Presidio part number. See Page 3
“HOW TO ORDER A STANDARD PART”
-50 -25 0 25 50 75 100 125
Temperature, oC
+10
0
-10
-20
-30
-40
-50
-60
-70
X7R
Y5V
TYPICAL X7R AND Y5V
TEMPERATURE COEFFICIENT
% Change in Capacitance
-50 -25 0 25 50 75 100 125
0.3
0.2
0.1
0
-0.1
-0.2
-0.3
Temperature, oC
TYPICAL NPO
TEMPERATURE COEFFICIENT
NPO
Change in Capacitance
(30ppm/ oC max.)
Visit Presidio’s website for additional
technical information on these products.
Voltage Rating NPO BX X7R
16/25 .15% 2.5% 3.5%
≥50 .15% 2.5% 2.5%
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
EXAMPLE: CR0805BX103K2P3
HOW TO ORDER
CR 0805 BX 103 K2P3
Prefix
Size Code
Dielectric Code
Capacitance Code
Special Code
Marking and Packaging
Te r mination Code
Voltage Code
Tolerance Code
SIZE
L
inches (mm)
W
inches (mm)
THICKNESS
MAX. (T)
inches (mm)
METALIZATION
BAND (M.B.)
inches (mm)
WVDC NPO BX X7R
DIELECTRIC
CR
HIGH RELIABILITY “CR” CAPACITORS
0402
0403
0504
0603
0805
1206
1209
1712
1725
2225
0.040 (1.02)
±
0.004 (0.10)
0.040 (1.02)
±
0.010 (0.25)
0.050 (1.27)
±
0.010 (0.25)
0.063 (1.60)
±
0.006 (0.15)
0.080 (2.03)
±
0.010 (0.25)
0.126 (3.20)
±
0.008 (0.20)
0.125 (3.18)
±
0.010 (0.25)
0.175 (4.45)
±
0.013 (0.33)
0.175 (4.45)
±
0.013 (0.33)
0.220 (5.59)
±
0.015 (0.38)
0.020 (0.51)
±
0.004 (0.10)
0.030 (0.76)
±
0.010 (0.25)
0.040 (1.02)
±
0.010 (0.25)
0.032 (0.81)
±
0.006 (0.15)
0.050 (1.27)
±
0.010 (0.25)
0.063 (1.60)
±
0.008 (0.20)
0.095 (2.41)
±
0.010 (0.25)
0.125 (3.18)
±
0.010 (0.25)
0.250 (6.35)
±
0.018 (0.46)
0.250 (6.35)
±
0.018 (0.46)
0.024
(0.61)
0.030
(0.76)
0.040
(1.02)
0.035
(0.89)
0.050
(1.27)
0.059
(1.50)
0.065
(1.65)
0.065
(1.65)
0.065
(1.65)
0.080
(2.03)
0.004 (0.10)
min. band
0.015 (0.38)
min. space
0.004 (0.10)
min. band
0.015 (0.38)
min. space
0.005 (0.13)
min. band
0.015 (0.38)
min. space
0.005 (0.13)
min. band
0.025 (0.64)
min. space
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
16 V 150 pF 2200 pF 4700 pF
25 V 100 pF 1500 pF 3300 pF
50 V 68 pF 1000 pF 2200 pF
100 V 39 pF 470 pF 1200 pF
16 V 270 pF 3900 pF 8200 pF
25 V 180 pF 2700 pF 6800 pF
50 V 120 pF 2200 pF 4700 pF
100 V 68 pF 820 pF 2200 pF
16 V 560 pF 8200 pF 0.022 µF
25 V 470 pF 8200 pF 0.015 µF
50 V 330 pF 4700 pF 0.012 µF
100 V 180 pF 2200 pF 5600 pF
16 V 330 pF 5600 pF 0.012 µF
25 V 220 pF 4700 pF 0.010 µF
50 V 180 pF 3300 pF 6800 pF
100 V 100 pF 1200 pF 3300 pF
16 V 1500 pF 0.027 µF 0.068 µF
25 V 1200 pF 0.022 µF 0.047 µF
50 V 820 pF 0.015 µF 0.033 µF
100 V 390 pF 6800 pF 0.018 µF
16 V 5600 pF 0.10 µF 0.22 µF
25 V 3900 pF 0.082 µF 0.15 µF
50 V 2700 pF 0.047 µF 0.10 µF
100 V 1200 pF 0.022 µF 0.056 µF
16 V .010 µF 0.22 µF 0.47 µF
25 V 8200 pF 0.18 µF 0.39 µF
50 V 6800 pF 0.15 µF 0.33 µF
100 V 3300 pF 0.056 µF 0.10 µF
16 V 0.022 µF 0.47 µF 0.82 µF
25 V 0.018 µF 0.33 µF 0.56 µF
50 V 0.012 µF 0.22 µF 0.39 µF
100 V 5600 pF 0.10 µF 0.18 µF
16 V 0.047 µF 1.2 µF 1.8 µF
25 V 0.039 µF 0.82 µF 1.2 µF
50 V 0.027 µF 0.56 µF 1.0 µF
100 V 0.012 µF 0.27 µF 0.39 µF
16 V 0.056 µF 1.5 µF 2.7 µF
25 V 0.056 µF 1.2 µF 1.8 µF
50 V 0.039 µF 0.82 µF 1.5 µF
100 V 0.018 µF 0.39 µF 0.68 µF
7
L
M.B.
T
W
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
HIGH RELIABILITY “SR” CAPACITORS
(TESTED SIMILARLY TO MIL-PRF-123-GROUP A)
For applications that require the highest level of reliability, Presidio recommends its high reliability “SR” capacitors. Tested
similarly to MIL-PRF-123 Group A, Presidio manufacturers these chips on the same manufacturing line as its military product
line. They may be used in both military and space applications. Please note these capacitors are NOT MIL-qualified.
QUALITY ASSURANCE PROVISIONS
Every lot undergoes the following inspection and tests:
a) Destructive Physical Analysis (DPA) — A representative
sample is pulled from each lot and examined per relevant
sections of EIA 469 and to verify adherence to Presidio’s
internal design criteria. Sample size is per
MIL-PRF-123.
b) Ultrasonic Scanning (optional) — This screening may
be performed on lots to assure the highest quality
microstructure. Ultrasonic scanning is not required for
each lot, and must be specified on the customer purchase
order.
c) Thermal Shock — All parts are temperature cycled for 20
cycles in accordance with MIL-PRF-123.
d) Voltage Conditioning — All parts receive a voltage
conditioning at 2X rated voltage and 125°C for a minimum
of 168 hours and a maximum of 264 hours. Voltage
conditioning may be terminated at any time between 168
and 264 hour time intervals when failures are less than .1%
or 1 piece, during the last 48 hours of the test. Tested in
accordance with MIL-PRF-123 except resistors are used in
place of fuses.
e) Insulation Resistance (IR @ 125°C) — All parts are
tested at 125°C and rated voltage in accordance with
Method 302 of MIL-STD-202. The minimum IR required is
10,000 megohms or 100 megohm-microfarads.
f) Dielectric Withstanding Voltage (DWV) — All parts are
tested at 2.5X rated voltage in accordance with Method
301 of MIL-STD-202, or according to EIA/MIL Standards.
g) Insulation Resistance (IR @ 25°C) — All parts are tested
at 25°C and rated voltage in accordance with Method 302
of MIL-STD-202. The minimum IR required is 100,000
megohms or 1,000 megohm-microfarads.
h) Capacitance — All parts are tested at 25°C and
1VACRMS in accordance with Method 305 of
MIL-STD-202.
i) Dissipation Factor (DF) —
See following table:
j) Percent Defective Allowed (PDA) — The cumulative
PDA after voltage conditioning is 5%. Pieces rejected as out
of tolerance for capacitance or visual screening will be
removed from the lot but not counted in the PDA calculation.
k) Visual — Performed on pieces in accordance with
MIL-PRF-123 Appendix B.
l) Mechanical — Level 1 AQL 1% in accordance with
MIL-PRF-123.
m)
Class K Element Evaluation (optional) — A MIL-PRF-
38534 Appendix C Passive Element Class K element
evaluation is available when the customer requires this
testing. Element evaluation is not required on each lot,
and must be specified on the purchase order.
n) Operating Temperature Range: –55°C to +125°C
STANDARD PACKAGING
Product will be packaged in individual waffle trays or tape
and reel as specified by customer.
DATA PACKAGE
Data will be sent with each shipment including:
a) Destructive Physical Analysis Report (optional) —
Destructive Physical Analysis (DPA) report and photographs
for each lot will be sent. Extra charge may apply.
b) Certificate of Compliance — Certificate of Compliance
and attributes test data sheet will be sent with each
shipment.
c) Class K Element Evaluation — If a Class K element
evaluation is required, all variables test data for
subgroup 3 tests will be included in the data package.
d) Ultrasonic Scanning Report (optional) — An
ultrasonic scanning report will be sent, including a
typical scan. Extra charge may apply.
Visit Presidio’s website for additional
technical information on these products.
8
EXAMPLE PART NUMBER
SR0805BX103K2P5
Add “SR” to the beginning of the standard
Presidio part number. See Page 3
“HOW TO ORDER A STANDARD PART”
Voltage Rating NPO BX X7R
16/25 .15% 2.5% 3.5%
≥50 .15% 2.5% 2.5%
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
EXAMPLE: SR0805BX103K2P5
HOW TO ORDER
SR 0805 BX 103 K2P5
Prefix
Size Code
Dielectric Code
Capacitance Code
Special Code
Marking and Packaging
Te r mination Code
Voltage Code
Tolerance Code
9
L
M.B.
T
W
Note: Above parts are tested similarly to MIL-PRF-55681 Group A only.
Presidio has the ability to add Group B for space and flight applications. Call the factory for more information.
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
0402
0.040 (1.02)
±
0.004 (0.10)
0.020 (0.51)
±
0.004 (0.10)
0.024
(0.61)
0.004 (0.10) min. band
0.015 (0.38) min. space
10 V 0.022 µF 0.10 µF
16 V 0.010 µF 0.047 µF
25 V 5600 pF 0.022 µF
0403
0.040 (1.02)
±
0.010 (0.25)
0.030 (0.76)
±
0.010 (0.25)
0.030
(0.76)
0.004 (0.10) min. band
0.015 (0.38) min. space
0504
0.050 (1.27)
±
0.010 (0.25)
0.040 (1.02)
±
0.010 (0.25)
0.040
(1.02)
0.005 (0.13) min. band
0.015 (0.38) min. space
0603
0.063 (1.60)
±
0.006 (0.15)
0.032 (0.81)
±
0.006 (0.15)
0.035
(0.89)
0.005 (0.13) min. band
0.025 (0.64) min. space
0805
0.080 (2.03)
±
0.010 (0.25)
0.050 (1.27)
±
0.010 (0.25)
0.050
(1.27)
0.020 (0.51)
±
0.010 (0.25)
1206
0.126 (3.20)
±
0.008 (0.20)
0.063 (1.60)
±
0.008 (0.20)
0.059
(1.50)
0.020 (0.51)
±
0.010 (0.25)
10 V 0.068 µF 0.18 µF
16 V 0.033 µF 0.10 µF
25 V 0.018 µF 0.056 µF
10 V 0.15 µF 0.47 µF
16 V 0.10 µF 0.33 µF
25 V 0.068 µF 0.18 µF
10 V 0.15 µF 0.47 µF
16 V 0.10 µF 0.33 µF
25 V 0.068 µF 0.18 µF
10 V 0.27 µF 0.82 µF
16 V 0.20 µF 0.56 µF
25 V 0.15 µF 0.47 µF
10 V 0.68 µF 2.0 µF
16 V 0.47 µF 1.5 µF
25 V 0.33 µF 1.0 µF
SIZE
L
inches (mm)
W
inches (mm)
THICKNESS
MAX. (T)
inches (mm)
METALIZATION
BAND (M.B.)
inches (mm)
WVDC
X7R Y5V
DIELECTRIC
EXTENDED RANGE CAPACITORS
For commercial applications that require maximum capacitance, Presidio recommends its extended range capacitors. This
product is suitable for Group A testing but is not intended for continuous use at 125° C at its maximum voltage rating.
0306
0.032 (0.81)
±
0.008 (0.20)
0.063 (1.60)
±
0.008 (0.20)
0.033
(0.84)
0.005 (0.13) min. band
0.010 (0.25) min. space
5 V 0.10 µF
16 V 0.039 µF
25 V 0.022 µF
0508
0.050 (1.27)
±
0.010 (0.25)
0.080 (2.03)
±
0.010 (0.25)
0.045
(1.14)
0.005 (0.13) min. band
0.020 (0.51) min. space
0912
0612
0.063 (1.60)
±
0.010 (0.25)
0.126 (3.20)
±
0.010 (0.25)
0.055
(1.40)
0.005 (0.13) min. band
0.025 (0.64) min. space
0.095 (2.41)
±
0.010 (0.25)
0.126 (3.20)
±
0.010 (0.25)
0.065
(1.65)
10 V 0.12 µF
16 V 0.10 µF
25 V 0.047 µF
16 V 0.27 µF
25 V 0.22 µF
16 V 0.68 µF
25 V 0.47 µF
0.005 (0.13) min. band
0.025 (0.64) min. space
NO
NO
YES
NO
NO
YES
NO
YES
NO
YES
SIZE
L
inches (mm)
W
inches (mm)
THICKNESS
MAX. (T)
inches (mm)
METALIZATION
BAND (M.B.)
inches (mm)
WVDC
X7R
DIELECTRIC
MIL-PRF-123 MINIMUM DIELECTRIC THICKNESS COMPLIANT: 0.8 mils for 50V
1.0 mils for 100V YES/NO
LOW INDUCTANCE CAPACITORS
In high speed switching applications where the inductance of a traditional form factor impairs the performance of the circuit,
Presidio recommends its low inductance capacitors.
EXAMPLE: 0508X7R103K2P3
HOW TO ORDER
0508 X7R 103 K2P3
Size Code
Dielectric Code
Capacitance Code
Special Code
Marking and Packaging
Te r mination Code
Voltage Code
Tolerance Code
10
L
M.B.
T
W
NPQ – HIGH Q DIELECTRIC CAPACITORS
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
For use in applications where the loss from traditional NPO formulations will not meet the circuit needs, Presidio
recommends its NPQ – High Q Dielectric Capacitors. Made from low loss porcelain ceramic dielectric, the designator NPQ
differentiates the ceramic from NPO in our part numbering system.
0402
0.040 (1.02)
±
0.004 (0.10)
0.020 (0.51)
±
0.004 (0.10)
0.024
(0.61)
0.004 (0.10) min. band
0.015 (0.38) min. space
50 V 18 pF
0403
0.040 (1.02)
±
0.010 (0.25)
0.030 (0.76)
±
0.010 (0.25)
0.030
(0.76)
0.004 (0.10) min. band
0.015 (0.38) min. space 50 V 33 pF
0504
0.050 (1.27)
±
0.010 (0.25)
0.040 (1.02)
±
0.010 (0.25)
0.040
(1.02)
0.005 (0.13) min. band
0.015 (0.38) min. space 50 V 82 pF
0505
0.055 (1.40)
±
0.010 (0.25)
0.055 (1.40)
±
0.010 (0.25)
0.055
(1.40)
0.005 (0.13) min. band
0.015 (0.38) min. space 50 V 100 pF
0603
0.063 (1.60)
±
0.006 (0.15)
0.032 (0.81)
±
0.006 (0.15)
0.035
(0.89)
0.005 (0.13) min. band
0.025 (0.64) min. space 50 V 47 pF
0805
0.080 (2.03)
±
0.010 (0.25)
0.050 (1.27)
±
0.010 (0.25)
0.050
(1.27)
0.020 (0.51)
±
0.010 (0.25)
50 V 270 pF
1010
0.110 (2.79)
±
0.015 (0.38)
0.110 (2.79)
±
0.015 (0.38)
0.100
(2.54)
0.020 (0.51)
±
0.010 (0.25)
50 V 1000 pF
1206
0.126 (3.20)
±
0.008 (0.20)
0.063 (1.60)
±
0.008 (0.20)
0.059
(1.50)
0.020 (0.51)
±
0.010 (0.25)
50 V 820 pF
SIZE
L
inches (mm)
W
inches (mm)
THICKNESS
MAX. (T)
inches (mm)
METALIZATION
BAND (M.B.)
inches (mm)
WVDC
Max. Cap
EXAMPLE: 0805NPQ101K2P3 HOW TO ORDER
0805
NPQ
101 K2P3
Size Code
Dielectric Code
Capacitance Code
Special Code
Marking and Packaging
Te r mination Code
Voltage Code
Tolerance Code
10
1
0.1
110
0805
0504
Resonant Frequency vs. Capacitance
Capacitance in pF
Frequency in GHz
100
1000
100
10
110
1GHz
1.4 GHz
100
Capacitance vs. Q
Capacitance in pF
Q
0504
250 MHz
500 MHz
700MHz
1.2 GHz
1000
100
10
1 10 100
Capacitance vs. Q
0805
Capacitance in pF
Q
500MHz
11
EXAMPLE PART NUMBER
0805NPQ101K2P3
Use the dielectric code “NPQ” as shown above.
See page 3 “HOW TO ORDER A STANDARD PART”
HIGH VOLTAGE “HV” CAPACITORS
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
SIZE
L
inches (mm)
W
inches (mm)
THICKNESS
MAX. (T)
inches (mm)
METALIZATION
BAND (M.B.)
inches (mm)
WVDC
NPO X7R
DIELECTRIC
1209
0.125 (3.18)
±
0.010 (0.25)
0.095 (2.41)
±
0.010 (0.25)
0.080
(2.03)
0.020 (0.51)
±
0.010 (0.25)
500 V 2700 pF 0 .022 µF
1000 V 390 pF 1800 pF
1514
0.150 (3.81)
±
0.010 (0.25)
0.140 (3.56)
±
0.010 (0.25)
0.140
(3.56)
0.020 (0.51)
±
0.010 (0.25)
500 V 3900 pF 0.039 µF
1000 V 1800 pF 0.01 µF
2000 V 390 pF 1800 pF
3000 V 150 pF 820 pF
1812
0.180 (4.57)
±
0.020 (0.51)
0.160 (4.06)
max.
0.120
(3.05)
0.020 (0.51)
±
0.010 (0.25)
500 V 6800 pF 0.068 µF
1000 V 2200 pF 0.015 µF
2000 V 270 pF 1800 pF
3000 V 120 pF 390 pF
1825
0.180 (4.57)
±
0.020 (0.51)
0.250 (6.35)
max.
0.160
(4.06)
0.020 (0.51)
±
0.010 (0.25)
500 V 0.012 µF 0.15 µF
1000 V 5600 pF 0.027 µF
2000 V 1000 pF 6800 pF
3000 V 470 pF 1800 pF
1918
0.190 (4.83)
±
0.013 (0.33)
0.180 (4.57)
±
0.013 (0.33)
0.150
(3.81)
0.020 (0.51)
±
0.010 (0.25)
500 V 8200 pF 0.082 µF
1000 V 3900 pF 0.022 µF
2000 V 820 pF 4700 pF
3000 V 330 pF 1800 pF
2225
0.230 (5.84)
±
0.020 (0.51)
0.250 (6.35)
±
0.018 (0.46)
0.200
(5.08)
0.020 (0.51)
±
0.010 (0.25)
500 V 0.015 µF 0.39 µF
1000 V 6800 pF 0.068 µF
2000 V 1500 pF 0.012 µF
3000 V 560 pF 3900 pF
2720
0.270 (6.85)
±
0.020 (0.51)
0.230 (5.84)
max.
0.200
(5.08)
0.020 (0.51)
±
0.010 (0.25)
500 V 0.012 µF 0.1 µF
1000 V 5600 pF 0.027 µF
2000 V 1500 pF 6800 pF
3000 V 560 pF 3300 pF
2824
0.280 (7.11)
±
0.020 (0.51)
0.250 (6.35)
max.
0.150
(3.81)
0.020 (0.51)
±
0.010 (0.25)
500 V 0.022 µF 0.22 µF
1000 V 8200 pF 0.047 µF
2000 V 1800 pF 0.01 µF
3000 V 820 pF 3300 pF
3012
0.300 (7.62)
±
0.020 (0.51)
0.150 (3.81)
max.
0.150
(3.81)
0.020 (0.51)
±
0.010 (0.25)
500 V 0.012 µF 0.082 µF
1000 V 5600 pF 0.018 µF
2000 V 560 pF 3300 pF
3000 V 390 pF 1200 pF
3728
0.370 (9.40)
±
0.020 (0.51)
0.330 (8.38)
max.
0.220
(5.59)
0.020 (0.51)
±
0.010 (0.25)
500 V 0.033 µF 0.27 µF
1000 V 0.018 µF 0.082 µF
2000 V 2700 pF 0.015 µF
3000 V 1800 pF 5600 pF
4000 V 680 pF 3300 pF
3933
0.380 (9.65)
±
0.020 (0.51)
0.350 (8.89)
max
0.150
(3.81)
0.020 (0.51)
±
0.010 (0.25)
500 V 0.047 µF 0.47 µF
1000 V 0.018 µF 0.1 µF
2000 V 3900 pF 0.022 µF
3000 V 1800 pF 8200 pF
4000 V 1000 pF 3900 pF
4018
0.400 (10.16)
±
0.020 (0.51)
0.210 (5.33)
max
0.200
(5.08)
0.020 (0.51)
±
0.010 (0.25)
500 V 0.022 µF 0.15 µF
1000 V 0.012 µF 0.047 µF
2000 V 1200 pF 0.01 µF
3000 V 820 pF 3900 pF
4000 V 560 pF 2200 pF
For use in high reliability high voltage applications, Presidio recommends its high voltage “HV” capacitors. Available
screened to the requirements of MIL-PRF-49467, the high voltage parts may require encapsulation to prevent surface
breakdown.
12
EXAMPLE PART NUMBER: HV1825X7R102K11P3
Add “HV” to the beginning of the normal Presidio part number.
See page 3 “HOW TO ORDER A STANDARD PART”
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
HV
X7R
4040
0.400 (10.16)
±
0.028 (0.71)
0.400 (10.16)
±
0.028 (0.71)
0.150
(3.81)
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
0.020 (0.51)
±
0.010 (0.25)
500 V 0.047 µF 0.47 µF
1000 V 0.022 µF 0.12 µF
2000 V 5600 pF 0.027 µF
3000 V 2200 pF 0.012 µF
4000 V 1000 pF 5600 pF
5000 V 680 pF 3900 µF
4540
0.450 (11.43)
±
0.032 (0.81)
0.400 (10.16)
±
0.028 (0.71)
0.150
(3.81)
500 V 0.068 µF 0.68 µF
1000 V 0.027 µF 0.15 µF
2000 V 6800 pF 0.039 µF
3000 V 2700 pF 0.015 µF
4000 V 1200 pF 6800 pF
5000 V 820 pF 4700 pF
4838
0.470 (11.94)
±
0.020 (0.51)
0.430 (10.92)
max. 0.220
(5.59)
500 V 0.056 µF 0.47 µF
1000 V 0.033 µF 0.15 µF
2000 V 5600 pF 0.027 µF
3000 V 3900 pF 0.012 µF
4000 V 1000 pF 4700 pF
5000 V 820 pF 3300 pF
5848
0.570 (14.48)
±
0.020 (0.51)
0.530 (13.46)
max. 0.220
(5.59)
500 V 0.1 µF 0.68 µF
1000 V 0.047 µF 0.22 µF
2000 V 0.01 µF 0.047 µF
3000 V 6800 pF 0.022 µF
4000 V 1800 pF 8200 pF
5000 V 1500 pF 4700 pF
6860
0.670 (17.02)
±
0.020 (0.51)
0.650 (16.51)
max. 0.220
(5.59)
500 V 0.15 µF 1.0 µF
1000 V 0.068 µF 0.33 µF
2000 V 0.015 µF 0.068 µF
3000 V 0.01 µF 0.033 µF
4000 V 2700 pF 0.012 µF
5000 V 2200 pF 8200 pF
HIGH VOLTAGE “HV” CAPACITORS (cont.)
SIZE
L
inches (mm)
W
inches (mm)
THICKNESS
MAX. (T)
inches (mm)
METALIZATION
BAND (M.B.)
inches (mm)
WVDC
NPO X7R
DIELECTRIC
EXAMPLE: HV1825X7R102K11P3
HOW TO ORDER
HV 1825 X7R 102 K11P 3
Prefix
Size Code
Dielectric Code
Capacitance Code
Special Code
Marking and Packaging
Te r mination Code
Voltage Code
Tolerance Code
SIZE
L
inches (mm)
W
inches (mm)
25V50V25V50V25V50V25V50V
0.039 µF0.027 µF0.022 µF0.018 µF0.012 µF6800 pF820 pF680 pF0.040 (1.02)0.040 (1.02)0.070 (1.78)0704
0.18 µF0.12 µF0.068 µF0.047 µF0.033 µF0.018 µF2200 pF1800 pF0.050 (1.27)0.050 (1.27)0.100 (2.54)0905
0.27 µF0.22 µF0.12 µF0.10 µF0.10 µF0.068 µF3300 pF2700 pF0.050 (1.27)0.070 (1.78)0.090 (2.29)0907
0.27 µF0.22 µF0.12 µF0.10 µF0.082 µF0.047 µF3900 pF3300 pF0.050 (1.27)0.050 (1.27)0.150 (3.81)1505
0.68 µF0.47 µF0.22 µF0.18 µF0.15 µF0.10 µF8200 pF4700 pF0.065 (1.65)0.065 (1.65)0.170 (4.32)1706
1.2 µF1.0 µF0.39 µF0.33 µF0.22 µF0.15 µF0.012 µF0.010 µF0.065 (1.65)0.080 (2.03)0.180 (4.57)1808
2.7 µF2.2 µF0.68 µF0.56 µF0.56 µF0.47 µF0.033 µF0.027 µF0.080 (2.03)0.180 (4.57)0.197 (5.00)2018
3.3 µF2.7 µF1.0 µF0.82 µF0.82 µF0.68 µF0.056 µF0.047 µF0.070 (1.78)0.210 (5.33)0.225 (5.72)2321
1.5 µF1.2 µF0.47 µF0.39 µF0.27 µF0.22 µF0.012 µF0.010 µF0.070 (1.78)0.080 (2.03)0.270 (6.85)2708
2.2 µF2.0 µF0.060 µF0.05 µF0.055 (1.40)0.250 (6.35)0.270 (6.85)2725
3.9 µF3.3 µF0.100 µF0.082 µF0.060 (1.52)0.390 (9.91)0.340 (8.64)3439
4.7 µF4.0 µF0.120 µF0.100 µF0.060 (1.52)0.360 (9.14)0.370 (9.40)3736
6.8 µF6.0 µF0.180 µF0.150 µF0.060 (1.52)0.410 (10.41)0.390 (9.91)3941
5.6 µF5.0 µF0.150 µF0.120 µF0.060 (1.52)0.360 (9.14)0.400 (10.16)4036
7.8 µF6.8 µF0.200 µF0.180 µF0.060 (1.52)0.400 (10.16)0.450 (11.43)4540
12.0 µF10.0 µF0.300 µF0.270 µF0.070 (1.78)0.950 (24.13)0.550 (13.97)5595
6.8 µF6.0 µF0.180 µF0.150 µF0.070 (1.78)0.298 (7.57)0.585 (14.86)5930
THICKNESS
MAX. (T)
inches (mm)
DIELECTRIC
X7RBXNPO Y5V
13
OTHER AVAILABLE SIZES
Chart below shows additional sizes available from factory
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
SIZE CDR01 CDR02 CDR03 CDR04 CDR05
Linch (mm) 0.080 (2.03) 0.180 (4.57) 0.180 (4.57) 0.180 (4.57) 0.180 (4.57)
Winch (mm) 0.050 (1.27) 0.050 (1.27) 0.080 (2.03) 0.125 (3.18) 0.250 (6.35)
T MAX. inch (mm)
0.055 (1.40) 0.055 (1.40) 0.080 (2.03) 0.080 (2.03) 0.080 (2.03)
M.B. inch (mm) 0.020 (0.51) 0.020 (0.51) 0.020 (0.51) 0.020 (0.51) 0.020 (0.51)
CDR06
0.225 (5.72)
0.250 (6.35)
0.080 (2.03)
0.020 (0.51)
DIELECTRIC BX BXBP BX BXBP BX BXBP BX BXBP
WVDC 100 50100 100 50100 100 50100 100 50100
BX BXBP
100 50
BP
100
BX
50100
PF/MF CODE
10
12
15
100
120
150
18
22
27
180
220
270
33
39
47
330
390
470
56
68
82
560
680
820
100
120
150
101
121
151
180
220
270
181
221
271
330
390
470
331
391
471
560
680
820
561
681
821
1000
1200
1500
102
122
152
1800
2200
2700
182
222
272
3300
3900
4700
332
392
472
5600
6800
8200
562
682
822
0.010
0.012
0.015
103
123
153
0.018
0.022
0.027
183
223
273
0.033
0.039
0.047
333
393
473
0.056
0.068
0.082
563
683
823
0.10
0.12
0.15
104
124
154
0.18
0.22
0.27
184
224
274
0.33
0.39
0.47
334
394
474
MIL-PRF-55681 CDR CHIP CAPACITORS CDR
14
NOTES:
• See Page 3 “HOW TO ORDER A MILITARY PART.”
• Consult factory for current qualification status.
W
T
M.B.
L
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • email: info@presidiocomponents.com
SIZE CDR31 CDR32 CDR33 CDR34 CDR35
Linch (mm) 0.079 (2.00) 0.126 (3.20) 0.126 (3.20) 0.177 (4.50) 0.177 (4.50)
Winch (mm) 0.049 (1.25) 0.063 (1.60) 0.098 (2.50) 0.126 (3.20) 0.252 (6.40)
T MAX. inch (mm)
0.051 (1.30) 0.051 (1.30) 0.059 (1.50) 0.059 (1.50) 0.059 (1.50)
M.B. inch (mm) 0.020 (0.51) 0.020 (0.51) 0.020 (0.51) 0.020 (0.51) 0.020 (0.51)
DIELECTRIC
WVDC
10
12
15
100
120
150
18
22
27
180
220
270
33
39
47
330
390
470
56
68
82
560
680
820
100
120
150
101
121
151
180
220
270
181
221
271
330
390
470
331
391
471
560
680
820
561
681
821
1000
1200
1500
102
122
152
1800
2200
2700
182
222
272
3300
3900
4700
332
392
472
5600
6800
8200
562
682
822
0.010
0.012
0.015
103
123
153
0.018
0.022
0.027
183
223
273
0.033
0.039
0.047
333
393
473
0.056
0.068
0.082
563
683
823
0.10
0.12
0.15
104
124
154
0.18
0.22
0.27
184
224
274
0.33
0.39
0.47
334
394
474
BP BXBP
50
BX
100 50100
BP BXBP
50
BX
100 50100
BP BXBP
50
BX
100 50100
BP BXBP
50
BX
100 50100
BP BXBP
50
BX
100 50100
PF/MF CODE
MIL-PRF-55681 CDR CHIP CAPACITORS CDR
NOTES:
• See Page 3 “HOW TO ORDER A MILITARY PART.”
• Consult factory for current qualification status.
15
W
T
M.B.
L
7169 Construction Court, San Diego, CA 92121 • Tel: 858-578-9390 • Fax: 800-538-3880 or 858-578-6225
www.presidiocomponents.com • info@presidiocomponents.com
PRESIDIO CUSTOM PRODUCTS
NOVEMBER 2011
CERAMIC CHIP
CAPACITORS
CERAMIC CAPACITORS
FOR RF, MICROWAVE &
FIBER OPTIC APPLICATIONS
HIGH RELIABILITY
EXTENDED RANGE
CHIPS FOR SPACE
HIGH VOLTAGE &
RADIAL LEADED PRODUCTS
MIL-PRF-49467 CAPACITORS
SMPS STACKED
CAPACITORS
HIGH TEMPERATURE
CERAMIC
CAPACITORS
MAIN PRODUCT CATALOGS
CUSTOM LEADS
CUSTOM STACKED
CUSTOM ASSEMBLY
HIGH TEMP
DOWNHOLE OIL
ENCAPSULATED
HIGH FREQUENCY
HIGH POWER
PRE SI DI O CO MP ON EN TS, IN C.
maintains more than 70 million standard
commercial and military parts in inventory. If
yo u ne ed a cu st om pr od uct , ca ll ou r
engineering team.
Custom products include non-standard
part sizes and voltages such as high
voltage, high temperature, high “Q”, custom
lea ds , cry og eni c ce ram ic s, ne ga tiv e
and positive temperature characteristic
ceramics, and piezoelectric formulations.
European sizes are also available.
Ba ck ed wi th n ume ro us pa te nts a nd
hundreds of years of combined experience,
Presidio’s engineering team is ready
and able to create the ideal solution for
any application.
‘S’ LEADS
EUROPEAN SIZES
SMPS STACKED
CAPACITORS
POWER-STACK™
CAPACITORS
ULTRA-PORCELAIN
RF CAPACITORS