HMC497LP4 / 497LP4E v02.0506 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz Typical Applications Features The HMC497LP4 / HMC497LP4E is suitable for various modulation systems: Very Low Noise Floor, -161 dBm/Hz * UMTS, GSM or CDMA Basestations High Output Power, +9 dBm Output P1dB * Fixed Wireless or WLL High Modulation Accuracy * ISM Transceivers, 900 & 2400 MHz DC - 700 MHz Baseband Input Very High Linearity, +22 dBm OIP3 * GMSK, QPSK, QAM, SSB Modulators Functional Diagram General Description The HMC497LP4 & HMC497LP4E are low noisehigh linearity Direct Quadrature Modulator RFICs which are ideal for digital modulation applications from 100 - 4000 MHz including; Cellular/3G, Broadband Wireless Access & ISM circuits. Housed in a compact 4x4 mm (LP4) SMT QFN package, the RFIC requires minimal external components & provides a low cost alternative to more complicated double upconversion architectures. The RF output port is single-ended and matched to 50 Ohms with no external components. The LO requires -6 to +6 dBm and can be driven in either differential or single-ended mode while the baseband inputs will support modulation inputs from DC - 700 MHz typical. This device is optimized for a supply voltage of +4.5V to +5.5V and consumes 170 mA @ +5.0V supply. MODULATORS - SMT 9 Electrical Specifications, See Test Conditions on following page herein. Parameter Min. Frequency Range, RF Output P1dB Output Noise Floor Output IP3 Max. Min. +4 Typ. Max. Min. 1700 - 2200 Typ. Max. Min. 2200 - 2700 Typ. Max. 3400 - 4000 Units MHz +8 +8 +7 +6 dBm -161 -159 -157 -150 dBm/Hz +17 dBm +3 dBm +22 Output Power 9 - 24 Typ. 450 - 960 +6 +22 +3 +5 +20 +2 +5 0 Carrier Feedthrough (uncalibrated) -32 -30 -26 -24 dBm Sideband Suppression (uncalibrated) 43 42 33 22 dBc LO Port Return Loss 25 15 14 13 dB RF Port Return Loss 11 20 17 11 dB For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC497LP4 / 497LP4E v02.0506 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz Electrical Specifications, (continued) Parameter Conditions Min. Typ. Max. Units 4000 MHz RF Output RF Frequency Range 100 RF Return Loss 15 dB LO Input 100 LO Input Power -6 0 LO Port Return Loss 4000 MHz +6 dBm 15 dB Baseband Input Port Baseband Port Bandwidth 3 dB Bandwidth with 50 source. Baseband Input DC Voltage (Vbbdc) Baseband Input DC Bias Current (Ibbdc) Single-ended Baseband Input Capacitance DC Power Requirements DC +1.4 +1.5 700 MHz +1.6 V Single-ended. 90 A De-embed to the lead of the device. 4.5 pF See Test Conditions Below Supply Voltage (Vcc1, Vcc2) +4.5 Supply Current (Icc1, Icc2) +5.0 +5.5 168 V mA Test Conditions: Unless Otherwise Specified, the Following Test Conditions Were Used Parameter Condition Temperature +25 C Baseband Input Frequency 200 kHz Baseband Input DC Voltage (Vbbdc) Baseband Input AC Voltage +1.5V (Peak to Peak Differential, I and Baseband Input AC Voltage for OIP3 Measurement (Peak to Peak Differential, I and Frequency Offset for Output Noise Measurements 1.6V 800 mV per tone @ 150 & 250 kHz 20 MHz Supply (Vcc1, Vcc2) +5.0V LO Input Power 0 dBm LO Input Mode 9 MODULATORS - SMT LO Frequency Range Single-Ended through LON Mounting Configuration Sideband & Carrier Feedthrough Refer to HMC497LP4 Application Schematic Herein Uncalibrated Calibrated vs. Uncalibrated Test Results During the Uncalibrated Sideband and Carrier Suppression tests, care is taken to ensure that the I/Q signal paths from the Vector Signal Generator (VSG) to the Device Under Test (DUT) are equal. The "Uncalibrated, +25 C" Sideband and Carrier Suppression plots were measured at room temperature, while the "Uncalibrated, over Temperature" Sideband and Carrier Suppression plots represent the worst case uncalibrated suppression levels measured at T= -40 C, +25 C, and +85 C. The "Calibrated, + 25 C" Sideband Suppression data was plotted after a manual adjustment of the I/Q amplitude balance and I/Q phase offset (skew) at +25 C, and at each LO input power level. The +25 C adjustment settings were held constant during tests over temperature. The "Calibrated, over Temperature" plots represent the worst case calibrated Sideband Suppression levels at T= -40 C, +25 C, and +85 C. The "Calibrated, +25 C" Carrier Suppression data was plotted after a manual adjustment of the Ip/In & Qp/Qn DC offsets at +25 C, and at each LO input power level. The +25 C adjustment settings were held constant during tests over temperature. The "Calibrated, over Temperature" plots represent the worst case Carrier Suppression levels measured at T= -40 C, +25 C, and +85 C. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 25 HMC497LP4 / 497LP4E v02.0506 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz 10 0 OUTPUT POWER (dBm) -10 -15 -20 CARRIER FEEDTHROUGH 0 -25 -30 -35 -40 SIDEBAND SUPPRESSION -5 -45 -50 9 -55 -10 0 400 -60 800 1200 1600 2000 2400 2800 3200 3600 4000 -120 30 OUTPUT IP3 -130 20 OUTPUT P1dB 10 -150 0 NOISE FLOOR -160 -10 MEASUREMENT NOISE FLOOR -20 0 400 -170 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) Calibrated Carrier Feedthrough* vs. Frequency Over Temperature 10 0 +25C +85C -40C -10 -20 -30 -40 -50 -60 CARRIER FEEDTHROUGH (dBm) 10 CARRIER FEEDTHROUGH (dBm) MODULATORS - SMT FREQUENCY (MHz) Uncalibrated Carrier Feedthrough* vs. Frequency Over Temperature -70 0 -10 +25C +85C -40C -20 -30 -40 -50 -60 -70 0 400 800 1200 1600 2000 2400 2800 3200 3600 4000 0 400 FREQUENCY (MHz) Return Loss vs. Frequency 10 0 0 -5 -10 +25C +85C -40C -20 -30 -40 -50 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) RETURN LOSS (dB) SIDEBAND SUPPRESSION (dBc) Sideband Suppression vs. Frequency Over Temperature RF LO -10 -15 -20 -25 -30 -60 -70 -35 0 400 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) 0 400 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) * See note titled "Calibrated vs. Uncalibrated test results" herein. 9 - 26 -140 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com OUTPUT NOISE FLOOR (dBm/Hz) OUTPUT POWER 5 CARRIER FEEDTHROUGH (dBm), SIDEBAND SUPPRESSION (dBc) -5 OUTPUT P1dB (dBm), OUTPUT IP3 (dBm) Output IP3, P1dB & Noise Floor @ 20 MHz Offset vs. Frequency Over Temperature Wideband Performance vs. Frequency Over Temperature HMC497LP4 / 497LP4E v02.0506 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz 0 OUTPUT POWER (dBm) -10 -15 -20 CARRIER FEEDTHROUGH 0 -25 -30 -35 -40 -5 -45 SIDEBAND SUPPRESSION -50 -55 -10 0 400 -60 800 1200 1600 2000 2400 2800 3200 3600 4000 -120 30 OUTPUT IP3 -130 20 OUTPUT P1dB 10 -150 0 NOISE FLOOR MEASUREMENT NOISE FLOOR -20 0 400 -170 800 1200 1600 2000 2400 2800 3200 3600 4000 Calibrated Carrier Feedthrough [1] vs. Frequency Over LO Power 10 CARRIER FEEDTHROUGH (dBm) 10 0 -10 -6 dBm 0 dBm +6 dBm -20 -30 -40 -50 -60 -70 0 -10 -6 dBm 0 dBm +6 dBm -20 -30 -40 -50 -60 -70 0 400 800 1200 1600 2000 2400 2800 3200 3600 4000 0 400 FREQUENCY (MHz) -10 -15 -20 CARRIER FEEDTHROUGH 0 -25 -30 -35 -40 -5 -45 SIDEBAND SUPPRESSION -50 -55 -10 0 400 -60 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) 30 -120 OUTPUT IP3 20 -130 OUTPUT P1dB 10 0 -140 -150 NOISE FLOOR -10 -160 MEASUREMENT NOISE FLOOR -20 0 400 OUTPUT NOISE FLOOR (dBm/Hz) OUTPUT POWER CARRIER FEEDTHROUGH (dBm), SIDEBAND SUPPRESSION (dBc) -5 OUTPUT P1dB (dBm), OUTPUT IP3 (dBm) Output IP3, P1dB & Noise Floor @ 20 MHz vs. Offset Frequency Over Supply Voltage [2] 0 5 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) Wideband Performance vs. Frequency Over Supply Voltage [2] 10 9 FREQUENCY (MHz) Uncalibrated Carrier Feedthrough [1] vs. Frequency Over LO Power CARRIER FEEDTHROUGH (dBm) -160 -10 FREQUENCY (MHz) OUTPUT POWER (dBm) -140 OUTPUT NOISE FLOOR (dBm/Hz) OUTPUT POWER 5 CARRIER FEEDTHROUGH (dBm), SIDEBAND SUPPRESSION (dBc) -5 MODULATORS - SMT 10 OUTPUT P1dB (dBm), OUTPUT IP3 (dBm) Output IP3, P1dB & Noise Floor @ 20 MHz Offset vs. Frequency Over LO Power Wideband Performance vs. Frequency Over LO Power -170 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (GHz) [1] See note titled "Calibrated vs. Uncalibrated test results" herein. [2] Supply voltage from +4.5 to +5.5V. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 27 HMC497LP4 / 497LP4E v02.0506 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz -130 -65 -140 -70 -150 -75 9 -80 -15 -160 -14 -13 -12 -11 -10 -9 -8 -7 -6 -140 OUTPUT NOISE (dBm/Hz) -60 Output Noise @ 20 MHz Offset vs. LO Power Over Temperature OUTPUT NOISE (dBm/Hz) ACPR (dBc) ACPR & Output Noise @ 20 MHz Offset for WCDMA @ 2140 MHz -145 T=+25C T=+85C T=- 40C -150 -155 -160 -165 -170 -5 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 LO POWER (dBm) Compression Characteristic @ 2140 MHz Power & Linearity @ 2140 MHz vs. Baseband Voltage 10 25 10 9 2 TONES OUTPUT POWER (dBm) 3rd ORDER INTERMOD (dBm) -10 -20 -30 OUTPUT IP3 8 OUTPUT POWER (dBm) POWER (dBm) 0 20 7 15 6 5 10 OUTPUT POWER 4 OIP3 (dBm) MODULATORS - SMT WCDMA CHANNEL POWER (dBm) 3 5 2 -40 1 -50 0.8 0 0 0.9 1 2 0.8 0.9 INPUT BASEBAND VOLTAGE PER TONE (Vp-p diff) EVM vs. LO Harmonic Level & Sideband Rejection for EDGE @ 1900 MHz 2000 1200 1100 1800 SBR: -40 dBc 1000 2 rd 1600 EVM (m%rms) EVM (m%rms) 2 INPUT BASEBAND VOLTAGE (Vp-p diff) EVM vs. LO Harmonic Level & Sideband Rejection for EDGE @ 900 MHz 900 800 1 LO 2 nd Harmonic Level -30 dBc 700 -16 dBc LO 3 Harmonic Level -70 dBc 1400 -30 dBc SBR: -42 dBc 2 1200 1000 600 SBR: -48 dBc 500 800 2 SBR: -48 dBc 2 600 400 -70 -65 -60 -55 rd -50 -45 -40 LO 3 Harmonic Level (dBc) -35 -30 -30 -25 -20 -15 -10 -5 nd LO 2 Harmonic Level (dBc) Note 1: W-CDMA (Modulation Set-up for ACPR Mode); The Baseband I and Q input signals were generated using "Test Model 1 with 64 channels" settings in the Agilent E3844C. Note 2: The I/Q baseband amplitude and phase inputs were offset to achieve Sideband Rejection (SBR) levels. LO = +6 dBm, SSB Power = 0 dBm 9 - 28 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC497LP4 / 497LP4E v02.0506 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz Absolute Maximum Ratings Vcc1, Vcc2 0V to +6V LO Input Power +12 dBm Baseband Input Voltage (AC + DC) (Reference to GND) 0.0V to +2.8V Channel Temperature 150 C Continuous Pdiss (T = 85C) (Derate 30 mW/C above 85C) 1.8 Watts Thermal Resistance (Rth) (junction to lead) 34 C/W -65 to +150 C Operating Temperature -40 to +85 C ESD Sensitivity (HBM) Class 1A 9 MODULATORS - SMT Storage Temperature ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC497LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC497LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H497 XXXX [2] H497 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 29 HMC497LP4 / 497LP4E v02.0506 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz Pin Descriptions MODULATORS - SMT 9 9 - 30 Pin Number Function Description 1,6, 7, 13, 15 N/C Not connected. 2, 5, 8, 11, 12, 14, 17, 19, 20, 23 GND These pins and the ground paddle should be connected to a high quality RF/DC ground. 3, 4 LOP, LON LO inputs. Need DC decoupling capacitors. The ports could be driven single ended or differentially. 9, 10 QN, QP Q channel differential baseband input. These high impedance ports should be biased around 1.5V DC. Nominal recommended baseband input is around 1.6V pp differential. 16 RFOUT RF output. 50 Ohms. Needs DC coupling capacitor. 18 Vcc1 Supply voltage for the mixer and output stages 79mA @ +5.0V. 21, 22 IP, IN I channel differential baseband input. These high impedence ports should be at the same bias voltage (VbbDC) as Qn & Qp. 24 Vcc2 Interface Schematic Supply voltage for the LO stage 88mA @ +5.0V. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC497LP4 / 497LP4E v02.0506 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz Evaluation PCB MODULATORS - SMT 9 List of Materials for Evaluation PCB 108962 [1] Item Description J1 - J7 PC Mount SMA Connector J8, J9 DC Molex Connector C1 - C3 100 pF Chip Capacitor, 0402 Pkg. C4, C5 1000 pF Chip Capacitor, 0402 Pkg. C6, C7 4.7 uF, Case A, Tantulum U1 HMC497LP4 Modulator PCB [2] 108960 Eval Board The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 31 HMC497LP4 / 497LP4E v02.0506 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz Application & Evaluation PCB Schematic MODULATORS - SMT 9 9 - 32 Characterization Set-up For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC497LP4 / 497LP4E v02.0506 SiGe WIDEBAND DIRECT MODULATOR RFIC, 100 - 4000 MHz Notes: MODULATORS - SMT 9 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 33