P670.F (12/16)1pulseelectronics.com
SMT Power Inductors
Round Wire Coils - PG0642NL Series
Height: 5.0mm Max
Footprint: 7.9mm x 7.6mm Max
Saturation Current: up to 32Apk
Inductance Range: 0.32µH to 5.4µH
USA 858 674 8100 Germany 49 2354 777 100 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768
Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C 1
Part 9
Number
Inductance 2
@ Irated
(µH TYP)
Irated 3
(A)
DCR 4 (mΩ)
(±6%)
Inductance
@ 0ADC
(µH ±20%)
Saturation 5
Current Isat
(A TYP)
Heating 6
Current IDC
(A TYP)
Core Loss 7
Factor
K2
PG0642.401NL 0.32 20.0 3.3 0.40 32 20.0 33.6
PG0642.681NL 0.54 17.5 4.3 0.68 25 17.5 46.5
PG0642.102NL 0.80 14.5 5.8 1.00 22 14.5 58.2
PG0642.152NL 1.20 13.3 6.8 1.50 18 13.3 75.7
PG0642.222NL 1.70 10.0 12.7 2.20 14 10.0 84.7
PG0642.332NL 2.60 9.5 16.6 3.30 13 9.5 107.0
PG0642.472NL 3.70 9.0 18.4 4.70 10 9.0 140.1
PG0642.682NL 5.40 6.0 26.4 6.80 8 6.0 176.2
1. Actual temperature of the component (ambient plus temperature rise) must be
within the standard operating temperature range.
2. Inductance at Irated is a typical inductance value for the component taken at rated
current.
3. The rated current listed is the lower of the saturation current (@ 25°C) or the heating
current depending on which value is lower.
4. The DCR of the part is measured at an ambient temperature of 20C 3C from point a
and b as shown above on the mechanical drawing.
5. The saturation current, ISAT, is the current at which the component inductance drops
by 20% (typical) at an ambient temperature of 25°C. This current is determined by
placing the component in the specified ambient environment and applying a short
duration pulse current (to eliminate self-heating eects) to the component.
6. The heating current, IDC, is the DC current required to raise the component tempera-
ture by approximately 40°C. The heating current is determined by mounting the
component on a typical PCB and applying current for 30 minutes. The temperature is
measured by placing the thermocouple on top of the unit under test. Take note that
the component’s performance varies depending on the system condition. It is sug-
gested that the component be tested at the system level, to verify the temperature
rise of the component during system operation.
7. Core Loss approximation is based on published core data:
Core Loss = K1 * (f)1.48 * (K2ΔI)1.97
Where: Core Loss = in Watts
K1 = 5.894E-10
f = switching frequency in kHz
K1 & K2 = core loss factors
ΔI = delta I across the component in Ampere
K2*ΔI = one half of the peak to peak flux density
across the component in Gauss
8. Unless otherwise specified, all testing is made at 100kHz, 0.1VAC.
9. Optional Tape & Reel packaging can be ordered by adding a “T” sux to the part
number (i.e. PG0642.222NL becomes PG0642.222NLT). Pulse complies to industry
standard tape and reel specification EIA481. The tape and reel for this product has a
width (W=24mm), pitch (Po=12mm) and depth (Ko=5.5mm).
Notes:
2pulseelectronics.com
SMT Power Inductors
Round Wire Coils - PG0642NL Series
P670.F (12/16)
For More Information
Pulse Worldwide
Headquarters
12220 World Trade Drive
San Diego, CA
92128
U.S.A.
Tel: 858 674 8100
Fax: 858 674 8262
Pulse Europe
Pulse Electronics GmbH
Am Rottland 12
58540 Meinerzhagen
Germany
Tel: 49 2354 777 100
Fax: 49 2354 777 168
Pulse China Headquarters
B402, Shenzhen Academy of
Aerospace Technology Bldg.
10th Kejinan Road
High-Tech Zone
Nanshan District
Shenzhen, PR China 518057
Tel: 86 755 33966678
Fax: 86 755 33966700
Pulse North China
Room 2704/2705
Super Ocean Finance
Ctr.
2067 Yan An Road
West
Shanghai 200336
China
Tel: 86 21 62787060
Fax: 86 2162786973
Pulse South Asia
135 Joo Seng Road
#03-02
PM Industrial Bldg.
Singapore 368363
Tel: 65 6287 8998
Fax: 65 6287 8998
Pulse North Asia
3F, No. 198
Zhongyuan Road
Zhongli City
Taoyuan County 320
Taiwan R. O. C.
Tel: 886 3 4356768
Fax: 886 3 4356823 (Pulse)
Fax: 886 3 4356820 (FRE)
Performance warranty of products oered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2016. Pulse Electronics, Inc. All rights reserved.
PG0642.XXXNL
Mechanical Schematic
Part Number X (Ref.)
PG0642.401NL 1.2mm
PG0642.681NL 1.2mm
PG0642.102NL 1.1mm
PG0642.152NL 1.1mm
PG0642.222NL 0.8mm
PG0642.332NL 0.7mm
PG0642.472NL 0.7mm
PG0642.682NL 0.7mm
Typical Inductance vs Current Characteristics Typical Core Loss vs Peak Flux Density
Weight (TYP) ...................1.2grams
T&R ...................................800/reel
Dimensions: mm
Unless otherwise specified, all tolerances are ±0,25