219 PLUG-IN RELAY WITH INTEGRAL LOCKING CLIP UL CONTACT LOAD RATINGS TABLE CONTACT CONFIGURATION C US UL Recognized File No. E13224 ALL STYLES 168986 C CURRENT LOAD VOLTAGE LOAD VOLTAGE FREQUENCY TYPE OF LOAD 10 AMP 120 VAC 50/60 Hz RESISTIVE 5 AMP 240 VAC 50/60 Hz RESISTIVE 10 AMP 28 VDC DC RESISTIVE 0.5 AMP 125 VDC DC RESISTIVE 3 AMP 120 VAC 50/60 Hz INDUCTIVE 1 AMP 240 VAC 50/60 Hz INDUCTIVE 3 AMP 28 VDC DC 0.5 AMP CONTACTS CAN CLOSE ON 30 AMP LOADS AND CARRY 10 AMPS CONTINUOUSLY AT ALL VOLTAGES SHOWN INDUCTIVE 0.1 AMP INDUCTIVE DC 125 VDC SUFFIX 69 WITH BLOWOUT MAGNET FOR DC SWITCHING (NOT UL OR CSA) 1.5 AMP RESISTIVE DC 125 VDC 4 AMP RESISTIVE DC 125 VDC US LISTED 225G IND. CONT. EQ. WHEN USED WITH SOCKETS 27390D OR 33377D CURRENT LIMITED TO RATING OF RELAY OR SOCKET WHICHEVER IS LESS SINGLE MAKE AND DOUBLE MAKE 250 VDC DC RESISTIVE 1.5 AMP 250 VDC DC RESISTIVE 0.5 AMP 125 VDC DC INDUCTIVE 1.5 AMP 125 VDC DC INDUCTIVE 150 mA 250 VDC DC INDUCTIVE 250 VDC DC INDUCTIVE 0.5 AMP COIL SPECIFICATIONS @ 25C AC RELAYS, 50/60 HZ 5 VA (COIL DATA @ 60HZ ) DC RELAYS, 1.8 WATTS (2.5 W @ 125 VDC) Milliamperes Milliamperes Impedance Nominal Resistance Nominal Resistance Ohms Voltage Ohms 10% Voltage Ohms 10% Inrush (Open) Sealed (Pull-In) Cold Hot 1.1 6 6 7.2 304 1500 15.5 840 385 12 4.2 24 15.5 120 540 240 2100 410 27 12 63.5 189 147 375 200 120 24 / 28* 250 96 77 75 40 2700 32 375 86 62 17 13,400 115/125* 6200 20 16 750 32 OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS) . 2.625 MAX (66.6) OPTIONAL MANUAL ACTUATOR 0.250 (6.35) VDC & 110 VDC Relays * 24 Have Name Plates Stamped 3.062 MAX (77.77) 2.593 MAX (65.5) 3.406 MAX (86.5) 0.435 (11) LOCKING CLIP LOCKING CLIP 1 6 12 2 3 4 5 11 10 9 8 1.468 (37.2) 1 7 2 0.10 DIA. X 0.435 (2.54 X 11) TYPICAL OF ALL PIN DIMENSIONS 3 4 5 6 24-28 & 110-125 VDC Respectively. These Relays Operate At 80% Of The Lower Voltages And Operate Within Allowable Temperature Rises At 110% Of Higher Voltages. 250 VDC: Use 125 VDC Relay And Series Resistor ( 6000 W, 5 W ) Not Supplied. THE 219 COIL IS ENCAPSULATED IN THERMO-SET EPOXY FOR PROTECTION. THE BUILT-IN LOCKING CLIP ELIMINATES THE NEED FOR ANY EXTERNAL HOLD-DOWN DEVICE. NUCLEAR QUALIFIED VERSIONS ARE AVAILABLE. PLEASE CONSULT FACTORY. 9/04 1...46 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 219 PLUG-IN RELAY WITH INTEGRAL LOCKING CLIP 12 & 14 PIN, 10 AMPS WIRING DIAGRAM (TOP VIEW) 6 1 7 12 219XBXP DPDT Mating Sockets 27390D, 33377D: SCREW/PANEL/DIN See section 7 GENER AL SPECIFICATIONS (@ 25 C ) COIL Pull-in Voltage AC (50/60 Hz):< Pull-in Voltage DC:< Dropout Voltage AC (50/60 Hz):> Dropout Voltage DC:> Maximum Voltage: Resistance: Insulation System Per UL Standard 1446: Duty: UNITS % of nominal % of nominal % of nominal % of nominal % of nominal % CONTA CONTACTS Contact Configuration: Contact Material: 85 80 10 10 110 10 Class B (130C) Continuous to 6PDT Silver alloy, gold diffused 10/5 120 / 120 10/5 28 / 28 100 @ 5 VDC or 0.5 W 6 1 7 12 219BBXP DPDT+2 NO 7 1 6 1 7 12 219ABAP DPDT+1NO & 1NC 219XDXP 4PDT 7 1 8 14 7 1 Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Minimum Recommended Load: A V A V ma TIMING Operate Time: Release Time: ms ms 25 20 V rms V rms V rms V rms megohms minimum @VDC 1500 1500 1500 1500 1000 @ 500 gs 10 CONTACT CONFIGURATION: DPDT: XBX DPDT +1 POLE: NO & 1 POLE NC: ABA 2 POLE: NO & DPDT: BBX 4 PDT: XDX 6 POLE: NO: FXX 4 POLE: NO & 2 POLE: NC: DXB SHOCK RESIS TANCE Functional: gs 20 OPTIONAL MAGNETIC BLOWOUT: CODE 69 TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: C C C C C C -40 +80 -40 +80 -40 +130 operations operations 100,000 10,000,000 94V-0 94V-0 IP grams Any Molded plastic polycarbonate 40 241 DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: VIBR ATION RESIS TANCE Functional: LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Weight: 219FXXP 6P-NO 219DXBP 4P-NO+2P-NC ORDERING CODE 219 XBX P L -24D CLASS: PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com OPTIONAL BIFURCATED CONTACTS: CODE 33 STANDARD FEATURES: POLYCARBONATE COVER: CODE P OPTIONAL FEATURES: STATUS LAMP: CODE L MANUAL ACTUATOR: CODE M COIL VOLTAGE: 6, 12, 24, 120, 240 ADD "A" FOR AC COILS 6, 12, 24, 48, 110 /125 ADD "D" FOR DC COILS COIL VOLTAGES & FREQUENCIES MUST BE SPECIFIED. Make before break and other contact configurations available, 9/04 1...47