RF3607D * * * * 402.0 to 407.3 MHz Filter Optimized for use with the TRC105 Transceiver Balanced 150 ohm IC Interface Complies with Directive 2002/95/EC (RoHS) Pb 403.5 MHz SAW Filter Absolute Maximum Ratings Value Units Input Power Level Rating +15 dBm DC Voltage 5 V Operating Temperature Range -40 to +85 C Storage Temperature Range in Tape and Reel -40 to +85 C SM3838-8 Electrical Characteristics Characteristic Sym Center Frequency fC Notes Min 403.5 1 dB Bandwidth BW1 18 Maximum Insertion Loss, 402.0 to 407.3 MHz ILMAX 1.7 Amplitude Ripple, p-p, 402.0 to 407.3 MHz Typ Max Units MHz MHz 2.0 0.6 Rejection Referenced to Insertion Loss at 403.5 MHz: DC to 383.5 MHz 40 43 483.5 to 450.5 MHz 30 33 450.5 to 850.5 MHz 47 50 850.5 to 1350.5 MHz 32 35 1350.5 to 2000 MHz 21 24 dB Source Impedance ZS 50 Balanced Load Impedance ZL 150 Case Style SM3838-8 3.8 x 3.8 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity 890, YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Single-ended Port Terminals 6 Balanced Port 1, 3 Case Ground 4, 5, 7, 8 No Connection 2 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. 2. 3. 4. 5. 6. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. US and international patents may apply. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. April 2009 RF3607D (R) 6/6/18 Page 1 of 10 www.murata.com R F 3 6 0 7 D -T R C 1 0 5 A p p lic a tio n C ir c u it 5 .6 n H 5 0 o h m A n te n n a 6 1 .2 p F 1 5 p F 1 R F 3 6 0 7 D 5 1 0 n H 3 9 n H 8 7 3 2 T R C 1 0 5 2 3 4 3 1 3 9 n H F a ir - R ite 2 5 0 6 0 3 1 2 1 7 Y O b e a d 0 .0 4 7 F 4 7 0 p F V D D _ P A R F 3 6 0 7 D 5 0 O h m 8 7 5 0 o h m 6 2 2 0 n H T u n in g N e tw o r k 1 R F 3 6 0 7 D 2 3 7 n H 5 4 Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. April 2009 RF3607D (R) 6/6/18 Page 2 of 10 3 5 0 o h m 6 p F www.murata.com RF3607D Broadband Response, 200 to 2000 MHz Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. April 2009 RF3607D (R) 6/6/18 Page 3 of 10 www.murata.com RF3607D Response, 306.5 to 506.5 MHz Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. April 2009 RF3607D (R) 6/6/18 Page 4 of 10 www.murata.com RF3607D Response, 356.5 to 456.5 MHz Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. April 2009 RF3607D (R) 6/6/18 Page 5 of 10 www.murata.com RF3607D Passband Response Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. April 2009 RF3607D (R) 6/6/18 Page 6 of 10 www.murata.com RF3607D Input Impedance Plot Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. April 2009 RF3607D (R) 6/6/18 Page 7 of 10 www.murata.com RF3607D Balanced Output Impedance Plot Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. April 2009 RF3607D (R) 6/6/18 Page 8 of 10 www.murata.com 8-Terminal Ceramic Surface-Mount Case 3.8 X 3.8 mm Nominal Footprint Case Dimensions Dimension A B C D E F G H Min 3.6 3.6 0.90 0.80 0.90 0.50 2.39 1.40 mm Nom 3.8 3.8 1.00 0.90 1.00 0.60 2.54 1.75 Max 4.0 4.0 1.1 1.0 1.10 0.70 2.69 2.05 Min 0.142 0.142 0.035 0.031 0.035 0.020 0.090 0.055 Inches Nom 0.150 0.150 0.040 0.035 0.040 0.024 0.100 0.069 Max 0.157 0.157 0.043 0.040 0.043 0.028 0.110 0.080 Materials PCB Footprint Solder Pad Plating 0.3 to 1.0 m Gold over 1.27 to 8.89 m Nickel Lid Plating 2.0 to 3.0 m Nickel Body Al2O3 Ceramic Pb Free TOP VIEW BOTTOM VIEW 890 YWWS Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. April 2009 RF3607D (R) 6/6/18 Page 9 of 10 www.murata.com Tape and Reel Specifications "B " Nominal Size Inches Quantity Per Reel millimeters 7 178 500 13 330 3000 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 4.25 mm Bo 4.25 mm Ko 1.30 mm Pitch 8.0 mm W 12.0 mm PIN #1 USER DIRECTION OF FEED Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. April 2009 RF3607D (R) 6/6/18 Page 10 of 10 www.murata.com