Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2009
RF3607D (R) 6/6/18 Page 1 of 10 www.murata.com
Electrical Characteristics
Electrical Connections
Characteristic Sym Notes Min Typ Max Units
Center Frequency fC403.5 MHz
1 dB Bandwidth BW118 MHz
Maximum Insertion Loss, 402.0 to 407.3 MHz ILMAX 1.7 2.0
dB
Amplitude Ripple, p-p, 402.0 to 407.3 MHz 0.6
Rejection Referenced to Insertion Loss at 403.5 MHz:
DC to 383.5 MHz 40 43
483.5 to 450.5 MHz 30 33
450.5 to 850.5 MHz 47 50
850.5 to 1350.5 MHz 32 35
1350.5 to 2000 MHz 21 24
Source Impedance ZS50
Balanced Load Impedance ZL150
Case Style SM3838-8 3.8 x 3.8 mm Nominal Footprint
Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator 890, YWWS
Standard Reel Quantity Reel Size 7 Inch 500 Pieces/Reel
Reel Size 13 Inch 3000 Pieces/Reel
Connection Terminals
Single-ended Port 6
Balanced Port 1, 3
Case Ground 4, 5, 7, 8
No Connection 2
• 402.0 to 407.3 MHz Filter
• Optimized for use with the TRC105 Transceiver
• Balanced 150 ohm IC Interface
• Complies with Directive 2002/95/EC (RoHS)
Absolute Maximum Ratings
Rating Value Units
Input Power Level +15 dBm
DC Voltage ±5 V
Operating Temperature Range -40 to +85 °C
Storage Temperature Range in Tape and Reel -40 to +85 °C
403.5 MHz
SAW Filter
RF3607D
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance
matching to 50 and measured with 50 network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external
impedance matching design. See Application Note No. 42 for details.
4. The design, manufacturing process, and specifications of this filter are subject to change.
5. US and international patents may apply.
6. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd.
Pb
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
NOTES:
SM3838-8
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2009
RF3607D (R) 6/6/18 Page 2 of 10 www.murata.com
5
6
781
3
2
R F 3 6 0 7 D
50 ohm
R F 3 6 0 7 D 5 0 O h m T u n i n g N e t w o r k
220 nH
450 ohm
37 nH
6 p F
5
6
781
3
2
R F 3 6 0 7 D
50 ohm
Antenna T R C 1 0 5
3 1
3 2
0 . 0 4 7 µ F
15 pF
V D D _ P A
R F 3 6 0 7 D - T R C 1 0 5 A p p l i c a t i o n C i r c u i t
4
39 nH
39 nH
F a i r - R i t e
2506031217YO bead
10 nH
1 . 2 p F
5 . 6 n H
470 pF
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2009
RF3607D (R) 6/6/18 Page 3 of 10 www.murata.com
RF3607D Broadband Response, 200 to 2000 MHz
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2009
RF3607D (R) 6/6/18 Page 4 of 10 www.murata.com
RF3607D Response, 306.5 to 506.5 MHz
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2009
RF3607D (R) 6/6/18 Page 5 of 10 www.murata.com
RF3607D Response, 356.5 to 456.5 MHz
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2009
RF3607D (R) 6/6/18 Page 6 of 10 www.murata.com
RF3607D Passband Response
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2009
RF3607D (R) 6/6/18 Page 7 of 10 www.murata.com
RF3607D Input Impedance Plot
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2009
RF3607D (R) 6/6/18 Page 8 of 10 www.murata.com
RF3607D Balanced Output Impedance Plot
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2009
RF3607D (R) 6/6/18 Page 9 of 10 www.murata.com
Case Dimensions
Dimension mm Inches
Min Nom Max Min Nom Max
A3.6 3.8 4.0 0.142 0.150 0.157
B3.6 3.8 4.0 0.142 0.150 0.157
C0.90 1.00 1.1 0.035 0.040 0.043
D0.80 0.90 1.0 0.031 0.035 0.040
E0.90 1.00 1.10 0.035 0.040 0.043
F0.50 0.60 0.70 0.020 0.024 0.028
G2.39 2.54 2.69 0.090 0.100 0.110
H1.40 1.75 2.05 0.055 0.069 0.080
Materials
Solder Pad
Plating 0.3 to 1.0 μm Gold over 1.27 to 8.89 μm Nickel
Lid Plating 2.0 to 3.0 μm Nickel
Body Al2O3 Ceramic
Pb Free
8-Terminal Ceramic Surface-Mount Case
3.8 X 3.8 mm Nominal Footprint
TOP VIEW BOTTOM VIEW
PCB Footprint
890
YWWS
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2009
RF3607D (R) 6/6/18 Page 10 of 10 www.murata.com
Tape and Reel Specifications
“B “
Nominal Size Quantity Per Reel
Inches millimeters
7 178 500
13 330 3000
COMPONENT ORIENTATION and DIMENSIONS
Carrier Tape Dimensions
Ao 4.25 mm
Bo 4.25 mm
Ko 1.30 mm
Pitch 8.0 mm
W 12.0 mm
PIN #1
USER DIRECTION OF FEED
