WINSTAR Professional LCD Module Manufacture WG160160A Graphic 160x160dots Dimenslon ITAwWtng 89.2+0.5 6.1 73.0 13.6 62.0(VA) nas 14,23 60.76(AA) / wn 4.5 MAX 9.3 MAX og) 2G 30.63 35.56 a a 9.9 4.7 { (P2.54*14) | | rt Telellelelalleleleltel: ] By Yes} Welelel etal T c 5 Fj Pa w/a 0.38) | 3 0.34.) | 1 I Io a | So =| ' Q aces]. | jd ictleig 8 3 ges & 1 mo oc Sls S\s | | 40110 PTH DOT SIZE i ln In | _ 1.8 I +. ! J = Ey o | @ i | ii 402.5 PTH tL 1.6 |) 1.6 2.5 84.2 405.0 PAD | LED B/L EL or NO B/L feature Mechanical Data 1.No controller 2. +5V power supply item Standard Value Unit 3. 1/160 duty cycle Module Dimension 89.2x85.0 mm 4. 4-Bit parallel or 1-Bit serial interface mode Viewing Area 62.0x62.0 am Dot Size 0.34x0.34 mm ' Dot Pitch 0.38x0.38 mm Pin Functi ; NO. Symbol unction Mounting hole 84.2x 80.0 mm = Vss (GND) Ground 2 M Control Signal for A.C. Driving Absolute Maximum hating 3 FLM The FLM signal indicates the beinning of each display cycle Item Symbol eae Unit min.| typ. | max. 4 CL1 The CL1 latches the serial data in shift register Power Supply VDD-VSS |4.75| 5.0 |5.52|) V 5 CL2 Clock signal for shifting the serial data input Voltage vi 0.3. --- | vpp| V 6 DB3 Data bus line Note : VSS=0 Volt, VDD=5.0 Volt. 7 DB2 Data bus line flectronical Characteristics 8 DB1 Data bus line Standard Value Item Symbol) Condition Unit 9 DBO = Data bus line min.| typ.|max. VDD L level O.7Vpp| ns Voo | 10 Vee Power supply for LCD driving Input Voltage VIO H level | Joavel v 4 Vad Power supply (+5V) Supply Current IDD VDD=5V _ 1.5 3 | mA Recommended LC Driving -20C 16.5 | 18.0) 19.5 12 Vo Contrast Adjustment Voltage for Normal Temp.| Wo pyq 25C 15.5 | 417.0| 18.5] v 13 DISPOFF Controls display off, 0: off, 1: on Version module 60C 14.5 | 16.0 | 17.5 LED Forward Voltage) VF 25C -- 42) 46) y 14 A Power supply for LED Forward Current} IF 25C ~~ | 500 | 1000 |mA 15 K Power supply for EL IEL |Vel=t10VAC;400Hz| --- | --- | 5.0 |mA WINSTAR