MICROPROCESSOR CRYSTALS AT49 (HC49 US) ULTRA LOW PROFILE ABL, ABL2, ABL3 ABRACON CORPORATION oy Directive 2002/95/EC Compliant FEATURES: P * High reliability, Low cost. * Low profile.(2.0mm max. ABL3) * Tight stability and extended temperature. * Proven resistance welded metal package. APPLICATIONS: * Blue-tooth and wireless applications. Automotive and industrial. * Computers, Modems, Communications. Hi-precision TCXO and clock applications. STANDARD SPECIFICATIONS 3.579545MHz - 70.00MHz 3.879545MHzZ < F < 24.0MHz (Fundamental) 24.0MHz < F < 50.00MHz (Fund. AT or BT) a! 24.0MHz < F < 70MHz (Third- Overtone) Frequency Range Gperation Made Operating Temperature Storage Temperature -40C to +85C Frequency Tolerance @ 25C +50ppm max. (See Options) Frequency stability over temp. +50ppm max. (See Options) 0C to + 70C (See Options) ry Equivalent Series Resistance | 180 max. for 3.5MHz < F < 5.0MHz | _! (ESR) 120 QO max. for 5.0MHz < F < 6.0MHz 100 max. for 6.0MHz < F < 8.0MHz | _ 80 max. for 8.0MHz <F < 9.0MHz Fundamental 60 max. for 9.0MHz <F < 10.0MHz i 50 max. for 10.0MHz < F < 16.0MHz | 40 max. for 16.0MHz < F < 50.0MHz 100 Q max. for 24.0MHz < F < 32.0MHz -_ 1 Third Overtone 80 max. for 32.0MHz < F < 70.0MHz Shunt Capacitance Co 7pF max. Load Capacitance C, 18pF (See Options) ~| [~ Drive Level imW max., 100uUW correlation Aging @ 25C per Year +5ppm max. Insulation Resistance 500MQ min. at 100Vdc +15V Ba unnGor H (max) ABL 0.138 (3.5) Environmental, and mechanical specifications, see appendix C. Group 1. ABL2 0.099 (2.5) Tape and Reel, see appendix H.(1,000pcs./reel). Reflow profile, see appendix E. ABL3 0.079 (2.0) Marking, see appendix G. Recommended handling, see appendix F. Application notes, see appendix A. Value added, see appendix D. ORDERING OPTIONS. Dimensions: Inches (mm) ABLX - Frequency - CL - ESR - Temperature - Tolerance - Stability - Mode - ValueAdded - Packaging Blank, 2 or 3 Ra -H5for+ 5ppm**||_R5 for + 5ppm** -| Insulator tab -T for Tape and Reel (ees) 1 fort 10ppm |]_Y for + 10ppm V_ Vinyl sleeve -P for Foam [XxX MHZ] | [A For=10C To + 60C Fe pom |]-G for + 1Sppm -L2 Middle third leads | | -TY for Tray Packing Load cap.in pF | |-B for -20C to + 70C} | ore <PPM )-X for + 20ppm -QXX (trimmed leads) or S for Series -C for -30C to + 70C -N for -30C to + 85C -D for -40C to + 85C -3 for + 25ppm -4 for + 30ppm -W for + 25ppm -Y for + 30ppm -F for Fundamental AT> 24MHz -FB for Fundamental BT> 24MHz ** Dlease call for availability -H for + 35ppm * BT cut +100ppm max. -10C to +60C ABRACON NOTE: Left blank if standard All specifications and markings subject to change without notice BBRACON IS 29 Journey * Aliso Viejo, CA 92656 * USA 001) OSes (949) 448-7070 + Fax: (949) 448-8484 CERTIFIED ahi S1 E-maiL: abinfo@abracon.com INTERNET ADDRESS: WWW.abracon.com CORPORATION