MBR10100CD SCHOTTKY BARRIER RECTIFIERS REVERSE VOLTAGE - 100 Volts FORWARD CURRENT - 10 Amperes DPAK FEATURES * Metal of silicon rectifier, majority carrier conduction * Guard ring for transient protection * Low power loss, high efficiency * High surge & current capability, low VF * For use in low voltage, high frequency inverters, free DPAK MIN. MAX. A 2.20 2.40 A1 0.00 0.13 b 0.66 0.86 c 0.46 0.58 D 6.50 6.70 D1 5.10 5.46 DIM wheeling, and polarity protection applications D2 MECHANICAL DATA * Case: DPAK molded plastic * Plastic package has UL flammability classification 4.83 REF. E 6.00 e 2.19 2.39 L 9.80 10.40 L1 L2 2.90 REF. 1.40 L3 94V-0 * Terminals: Matte Tin * Lead Free Finish, RoHS Compliant * Polarity: As marked on the body * Weight: 0.0011 ounces, 0.0315 grams * Mounting position: Any 1.70 1.6 REF. L4 0.60 1.00 1.10 1.30 0 8 h 0.00 0.30 V 5.35 REF. All Dimension in millmeter 2 1 6.20 3 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. PARAMETER SYMBOL MBR10100CD UNIT Maximum Repetitive Peak Reverse Voltage @IR=100uA VRRM 100 V Maximum DC Blocking Voltage @IR=100uA VDC 100 V Average Rectified Output Current @Tc=105C IF 10 A Peak Forward Surge Current single half sine-wave superimposed on rated load @1ms @8.3ms IFSM 300 150 A Tj=25C Tj=125C Tj=25C Tj=125C VF 0.85 0.75 0.95 0.85 V Maximum DC Reverse Current at Rated DC Tj=25C Blocking Voltage Tj=125C IR 10 15 uA mA Maximum Forward Voltage Note(1) IF=5A@ IF=5A@ IF=10A@ IF=10A@ Typical thermal resistance Junction to Case Typical thermal resistance Junction to Lead Typical thermal resistance Junction to Ambient ( With heatsink,decive mounted on 50mmx50mmx2mm copper plate) Typical thermal resistance Junction to Case Typical thermal resistance Junction to Lead Typical thermal resistance Junction to Ambient ( Without heatsink ) RthJC RthJL RthJA 6.5 6.5 20 RthJC RthJL RthJA 26 26 66 C/W Typical junction Capacitance per element (Note 2) Cj Operating junction temperature range TJ -55 to +150 C TSTG -55 to +150 C Storage temperature range pF REV. 0, Nov-2011, KSHB23 Note : (1) (2) 300 C/W 300us Pulse Width, 2% Duty Cycle. Measured at 1.0MHz and applied reverse voltage of 4.0 VDC. RATING AND CHARACTERISTIC CURVES MBR10100CD FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT FIG.1- FORWARD CURRENT DERATING CURVE 150 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 12 10 120 8 With heatsink 50*50*2 mm copper plate, Rth JC=6.5/W 6 4 Without heatsink, Rth JC=26/W 2 90 60 30 8.3ms Single Half Sine-Wave 0 0 0 25 50 75 100 125 1 150 10 CASE TEMPERATURE, (C) FIG.4- TYPICAL FORWARD CHARACTERISTICS FIG.3- TYPICAL JUNCTION CAPACITANCE 100 INSTANTANEOUS FORWARD CURRENT, (A) 1000 100 Tj=25, f=1MHz 10 Tj=125C, 1 Tj=25C, 0.1 PULSE WIDTH 300us, 2% Duty Cycle 0.01 10 1 10 0.1 100 0.2 0.3 0.4 0.5 FIG.5- TYPICAL REVERSE CHARACTERISTICS 10 Tj=150C 1 Tj=125C Tj=100C 0.1 Tj=75C 0.01 Tj=50C 0.001 Tj=25C 0.0001 0 0.6 0.7 0.8 0.9 1 INSTANTANEOUS FORWARD VOLTAGE, (V) REVERSE,VOLTAGE, (V) INSTANTANEOUS REVERSE CURRENT, (mA) Capacitance,(pF) 100 NUMBER OF CY CLES AT 60Hz 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 120 1.1 1.2 Legal Disclaimer Notice MBR10100CD Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.