2SD1224 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) (Darlington) 2SD1224 Pulse Motor Drive, Hammer Drive Applications Switching Applications Power Amplifier Applications Unit: mm * High DC current gain: hFE = 4000 (min) (VCE = 2 V, IC = 150 mA) * Low saturation voltage: VCE (sat) = 1.5 V (max) (IC = 1 A, IB = 1 mA) Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 30 V Collector-emitter voltage VCEO 30 V Emitter-base voltage VEBO 10 V Collector current IC 1.5 A Base current IB 0.15 A Collector power dissipation Ta = 25C Tc = 25C Junction temperature Storage temperature range PC 1.0 10 W Tj 150 C Tstg -55 to 150 C JEDEC JEITA TOSHIBA 2-7B1A Note: Using continuously under heavy loads (e.g. the application of high Weight: 0.36 g (typ.) temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Equivalent Circuit COLLECTOR BASE EMITTER 1 2006-11-21 2SD1224 Electrical Characteristics (Ta = 25C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 30 V, IE = 0 10 A Emitter cut-off current IEBO VEB = 10 V, IC = 0 10 A V (BR) CEO IC = 10 mA, IB = 0 30 V Collector-emitter breakdown voltage 4000 Collector-emitter saturation voltage VCE (sat) hFE IC = 1 A, IB = 1 mA 1.5 V Base-emitter saturation voltage VBE (sat) IC = 1 A, IB = 1 mA 2.2 V 0.18 0.6 0.3 Turn-on time VCE = 2 V, IC = 150 mA ton OUTPUT 20 s IB1 Switching time Storage time tstg IB1 INPUT IB2 IB2 15 DC current gain s VCC 15 V Fall time tf IB1 = -IB2 = 1 mA, DUTY CYCLE 1% Marking D1224 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-21 2SD1224 IC - VCE 60 400 50 500 Common emitter Tc = 100C (mA) 500 Common emitter Tc = 25C Collector current IC Collector current IC (mA) IC - VCE 40 300 30 200 20 100 0 0 IB = 10 A 0 1 2 3 4 Collector-emitter voltage 5 30 400 25 300 20 15 200 10 100 0 0 6 35 VCE (V) IB = 5 A 0 1 2 3 4 Collector-emitter voltage IC - VCE 5 6 VCE (V) IC - VBE 1.0 Common emitter 160 VCE = 2 V (A) 140 400 120 Collector current IC Collector current IC (mA) 500 Common emitter Tc = -50C 100 300 80 200 60 40 100 0.8 0.6 Tc = 100C 25 -50 0.4 0.2 IB = 20 A 0 0 0 1 2 4 3 Collector-emitter voltage 5 0 0 6 VCE (V) 0.4 0.8 Base-emitter voltage hFE - IC 2.0 2.4 VBE (V) 10 Collector-emitter saturation voltage VCE (sat) (V) DC current gain hFE 1.6 VCE (sat) - IC 30000 Tc = 100C 10000 25 5000 -50 3000 1000 Common emitter 500 300 0.002 1.2 VCE = 2 V 0.01 0.03 0.1 Collector current IC 0.3 1 (A) IC/IB = 1000 3 Tc = -50C 1 0.5 25 0.3 0.1 0.002 3 Common emitter 5 100 0.01 0.03 0.1 Collector current IC 3 0.3 1 3 (A) 2006-11-21 2SD1224 VBE (sat) - IC PC - Ta PC (W) Common emitter IC/IB = 1000 10 5 Collector power dissipation Base-emitter saturation voltage VBE (sat) (V) 30 3 Tc = -50C 1 25 0.5 100 0.3 0.1 0.002 0.01 0.03 0.1 0.3 Collector current IC 1 10 8 6 4 (2) 2 (3) 0 0 (A) (1) Tc = Ta infinite heat sink (2) Ceramic substrate 50 x 50 x 0.8 mm (3) No heat sink (1) 40 80 120 160 200 240 280 Ambient temperature Ta (C) Safe Operating Area 5 3 Collector current IC (A) IC max (pulsed)* IC max (continuous) 1 ms* 1 10 ms* DC operation Tc = 25C 0.5 0.3 *: Single nonrepetitive pulse Tc = 25C Curves must be derated linearly with increase in temperature. 0.1 1 3 VCEO max 10 Collector-emitter voltage 30 VCE (V) 4 2006-11-21 2SD1224 RESTRICTIONS ON PRODUCT USE 20070701-EN * The information contained herein is subject to change without notice. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-21