COMMUNICATIONS MODULES & SUBSYSTEMS
Key Features Three configurations supporting SR2/IR2/LR2 applications
Supports dense wavelength division multiplexing
(DWDM) applications (without wavelocker)
Microprocessor controls to support I2C
Integrated 16:1/1:16 mux/demux
Small form factor package (2.2" x 3.0" x 0.53") for high
density applications
Low power consumption: 4.8 W typical, 6.8 W maximum
for TDM applications
70 °C maximum operating temperature
High sensitivity PIN or APD receivers
SONET, FEC, Ethernet and Multirate Capable Versions
Forward, counter and line timing clocking modes
JDSU 10 Gb/s PH1 Series transponders are intended for 1550 nm system
applications with reaches of up to 80 km. The series includes three different
transponders for SR2 (25 km), IR2 (40 km), and LR2 (80 km) TDM or DWDM
applications. Each transponder accepts 16 bits of parallel digital data and converts
it to a 10 Gb/s NRZ modulated optical signal. It also accepts a 10 Gb/s NRZ
modulated optical signal and converts it into 16 bit wide parallel digital data.
The PH1 series offers low DC power dissipation and is available in either a small
form factor package (2.2 x 3 x 0.53 inches) or in a larger footprint (3.5 x 4.5 x 0.53
inches) package, depending on system thermal performance requirements. The
transmit design uses an Electro-Absorptive Modulated Laser (EML) which,
depending on the configuration, produces an average output power of between
-4 dBm to 2 dBm (EOL). A PIN (-17 dBm typical sensitivity) or APD (-24 dBm
typical sensitivity) receiver is available, based on system configurations.
JDSU PH1 Series transponders are designed to support the following data rates:
9.953 Gb/s (SONET), 10.3125 Gb/s (Ethernet), 10.664 Gb/s (FEC Encoded),
10.709 Gb/s FEC, or 11.09 Gb/s EFEC. They meet all applicable SONET/SDH standards.
Applications
Telecommunications
Metropolitan Area Networks
Subscriber loop
Intra-office SONET/SDH
High bit-rate data communications
Compliance
Telcordia GR-253-Core
10 Gb/s TDM/DWDM 300 Pin SFF MSA SR2/IR2/LR2 Transponder
PH1 Series
NORTH AMERICA:800 498-JDSU (5378) WEBSITE:www.jdsu.comWORLDWIDE:+800 5378-JDSU
2
PH1 SERIES
Dimensions Diagram (Specifications in inches [mm] unless otherwise noted.)
FIBER PIGTAIL
39.37 NOM
[1 METER]
0.52 MAX
[13.2]
2.20 MAX
[56.1]
3.00 MAX
[76.5]
2X 1.20 MAX
[30.0]
0.525±0.010
[13.34±0.25]
Configuration A
Configuration C
FIBER PIGTAIL
41.73 NOM
[1.06 METER]
0.835±0.010
[21.21±0.25]
2X 1.10 MAX
[27.9]
3.50 MAX
[88.9]
3.31 MAX
[84.1]
2X 3.94 MAX
[100.1]
0.52 MAX
[13.2]
3
PH1 SERIES
Module Functional Block Diagram
(K 30) TxFIFOERR
(K27) TxFIFORES
(B30) TxLOCKERR
(K24) TxRESET
TxDin (15:0)
(G28, 29) TxPICLK
(J21, K21) TxRATESEL(1: 0)
(E28, 29) TxPCLK
(C28, 29) TxMCLK
(F30) TxREFSEL
(A28, 29) TxREFCLK
(H30) TxLINETIMESEL
Mux
10 Gb/s
Laser
Driver
EML
Laser
PLL
Laser
TEC
Control
Laser
Bias
Control
10 Gb/s Clock
Recovery PD Bias
Control
µC
De -Mux
10 Gb/s
CMU
RxDout (15:0)
(E13,14) RxPOCLK
(C13,14) RxMCLK
(B 15) RxLOCKERR
(A13,14) RxREFCLK
(B9) RxLCKREF
(B6) RxMUTEDout
(F15) RxREFSEL
Vdd2 (1.8 VDC optional)
Vdd (3.3Vdc)
Vcc (5VDC)
Vee ( -5.2Vdc)
GND
10 Gb/s Serial Optic Output
LsPOWMON (D18)
LsBIASMON (F18)
LsENABLE (F21)
TxTRACE (J29)
LsTEMPMON (D21)
LsTEMPALM (F27)
LsBIASALM (F24
ALMINT (H15)
I2CDATA (K18)
I2CCLOCK (K15)
I2CADD(2:0) (D9,6,3)
MOD_RESET (D12)
10 Gb/s Serial Optic Input
RxPOWMON (F3)
RxPOWALM (F6)
APDTEMPMON (H3)
(L1 version only)
RxRATESEL(1:0) (J3,K3)
RxMUTEPOCLK (K9)
T
IA
Jitter Filter Bypass
Configuration
F RAM
EEPROM
Re
g
ulator
Vdd2 (1.8VDC)
Vdd (3.3VDC)
Vcc (5VDC)
Vee ( -5.2Vdc)
1.8 V Supply Source
Configuration
T
ransmitter
Receiver
µC bus
PD
4
PH1 SERIES
PH1 (IR2) Specifications
Parameter Minimum Typical Maximum
Transmitter
Output power (EOL) -1 dBm 0.5 dBm 2 dBm
Extinction ratio (EOL) 8.2 dB - -
Tx spectral range 1530 nm - 1570 nm
Wavelength stability over operating temperature (BOL setup, 100 GHz option) -25 pm - 25 pm
Wavelength stability over operating temperature (EOL setup, 100 GHz option) -100 pm - 100 pm
Sidemode suppression ratio 30 dB - -
Spectral power density - - 0.1 mW/MHz
Jitter generation GR-253 compliant
Receiver
PIN input power {BER = 10-12} (EOL) -15.0 dBm -16.0 dBm -
Maximum overload: PIN receiver {BER = 10-12} (EOL) -1 dBm - -
Rx spectral range 1280 nm - 1600 nm
Jitter tolerance and jitter transfer GR-253 compliant
System optical return loss -27 dB - -
Optical Path
Optical path penalty at 1550 nm and with 1600 ps/nm dispersion - - 2 dB
Electrical
Operating case temperature -5 °C - 70 °C
TDM power dissipation with jitter filter - 5.0 W 7.0 W
TDM power dissipation without jitter filter - 4.8 W 6.8 W
DWDM power dissipation with jitter filter - 5.8 W 7.8 W
DWDM power dissipation without jitter filter - 5.6 W 7.6 W
PH1 (SR2) Specifications
Parameter Minimum Typical Maximum
Transmitter
Output power (EOL) -4 dBm -2.5 dBm -1 dBm
Extinction ratio (EOL) 8.2 dB - -
Tx spectral range 1530 nm - 1570 nm
Sidemode suppression ratio 30 dB - -
Spectral power density - - 0.1 mW/MHz
Jitter generation GR-253 compliant
Receiver
PIN input power {BER = 10-12} (EOL) -15.0 dBm -16.0 dBm -
Maximum overload: PIN receiver {BER = 10-12} (EOL) -1 dBm - -
Rx spectral range 1280 nm - 1600 nm
Jitter tolerance and jitter transfer GR-253 compliant
System optical return loss -27 dB - -
Optical Path
Optical path penalty at 1550 nm and with 1600 ps/nm dispersion - - 2 dB
Electrical
Operating case temperature -5 °C - 70 °C
TDM power dissipation with jitter filter - 5.0 W 7.0 W
TDM power dissipation without jitter filter - 4.8 W 6.8 W
5
PH1 SERIES
PH1 (LR2) Specifications
Parameter Minimum Typical Maximum
Transmitter
Output power (EOL)
LP and LA options 0 dBm 2 dBm 4 dBm
LH option 2 dBm 4 dBm 6 dBm
Extinction ratio (EOL) 9.5 dB - -
Tx spectral range 1530 nm - 1570 nm
Wavelength stability over operating temperature (BOL setup, 100 GHz option) -25 pm - 25 pm
Wavelength stability over operating temperature (EOL setup, 100 GHz option) -100 pm - 100 pm
Sidemode suppression ratio 30 dB - -
Spectral power density - - 0.1 mW/MHz
Jitter generation GR-253 compliant
Receiver
APD input power {BER = 10-12} (EOL) -24 dBm -17 dBm -
Maximum overload: APD receiver {BER = 10-12} (EOL) -5 dBm - -
Rx spectral range 1280 nm - 1600 nm
Jitter tolerance and jitter transfer GR-253 compliant
System optical return loss -27 dB - -
Optical Path
Optical path penalty at 1550 nm and with 1600 ps/nm dispersion - - 2 dB
Electrical
Operating case temperature -5 °C - 70 °C
TDM power dissipation with jitter filter - 8.5 W 7.9 W
TDM power dissipation without jitter filter - 8.7 W 7.7 W
DWDM power dissipation with jitter filter - 6.7 W 8.7 W
DWDM power dissipation without jitter filter - 6.5 W 8.5 W
NORTH AMERICA:800 498-JDSU (5378) WEBSITE:www.jdsu.comWORLDWIDE:+800 5378-JDSU
Telcordia is a registered trademark of Telcordia Technologies Incorporated.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, includ-
ing withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase
Corporation. All rights reserved. 10143062 Rev. 002 05/06 PH1.DS.CMS.AE
PH1 SERIES
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: PH1-SI2LATD5N00
Code Channel Width
2 25 GHz 1
5 50 GHz 1
1 100 GHz
NNot used
Code Custom Options
Please consult JDSU
Code Format/ITU Channel/Wavelength2
TD5 TDM 1550 nm
436 C-band DWDM channels,100 GHz spacing, 1563.86 nm/191.7 GHz
432 C-band DWDM channels,100 GHz spacing, 1563.05 nm/191.8 GHz
428 C-band DWDM channels,100 GHz spacing, 1562.23 nm/191.9 GHz
424 C-band DWDM channels,100 GHz spacing, 1561.42 nm/192.0 GHz
420 C-band DWDM channels,100 GHz spacing, 1560.61 nm/192.1 GHz
416 C-band DWDM channels,100 GHz spacing, 1559.79 nm/192.2 GHz
412 C-band DWDM channels,100 GHz spacing, 1558.98 nm/192.3 GHz
408 C-band DWDM channels,100 GHz spacing, 1558.17 nm/192.4 GHz
404 C-band DWDM channels,100 GHz spacing, 1557.36 nm/192.5 GHz
400 C-band DWDM channels,100 GHz spacing, 1556.55 nm/192.6 GHz
396 C-band DWDM channels,100 GHz spacing, 1555.75 nm/192.7 GHz
392 C-band DWDM channels,100 GHz spacing, 1554.94 nm/192.8 GHz
388 C-band DWDM channels,100 GHz spacing, 1554.13 nm/192.9 GHz
384 C-band DWDM channels,100 GHz spacing, 1553.33 nm/193.0 GHz
380 C-band DWDM channels,100 GHz spacing, 1552.52 nm/193.1 GHz
376 C-band DWDM channels,100 GHz spacing, 1551.72 nm/193.2 GHz
372 C-band DWDM channels,100 GHz spacing, 1550.92 nm/193.3 GHz
368 C-band DWDM channels,100 GHz spacing, 1550.12 nm/193.4 GHz
364 C-band DWDM channels,100 GHz spacing, 1549.32 nm/193.5 GHz
360 C-band DWDM channels,100 GHz spacing, 1548.51 nm/193.6 GHz
356 C-band DWDM channels,100 GHz spacing, 1547.72 nm/193.7 GHz
352 C-band DWDM channels,100 GHz spacing, 1546.92 nm/193.8 GHz
348 C-band DWDM channels,100 GHz spacing, 1546.12 nm/193.9 GHz
344 C-band DWDM channels,100 GHz spacing, 1545.32 nm/194.0 GHz
340 C-band DWDM channels,100 GHz spacing, 1544.53 nm/194.1 GHz
336 C-band DWDM channels,100 GHz spacing, 1543.73 nm/194.2 GHz
332 C-band DWDM channels,100 GHz spacing, 1542.94 nm/194.3 GHz
328 C-band DWDM channels,100 GHz spacing, 1542.14 nm/194.4 GHz
324 C-band DWDM channels,100 GHz spacing, 1541.35 nm/194.5 GHz
320 C-band DWDM channels,100 GHz spacing, 1540.56 nm/194.6 GHz
316 C-band DWDM channels,100 GHz spacing, 1539.77 nm/194.7 GHz
312 C-band DWDM channels,100 GHz spacing, 1538.98 nm/194.8 GHz
308 C-band DWDM channels,100 GHz spacing, 1538.19 nm/194.9 GHz
304 C-band DWDM channels,100 GHz spacing, 1537.40 nm/195.0 GHz
300 C-band DWDM channels,100 GHz spacing, 1536.61 nm/195.1 GHz
296 C-band DWDM channels,100 GHz spacing, 1535.82 nm/195.2 GHz
292 C-band DWDM channels,100 GHz spacing, 1535.04 nm/195.3 GHz
288 C-band DWDM channels,100 GHz spacing, 1534.25 nm/195.4 GHz
284 C-band DWDM channels,100 GHz spacing, 1533.47 nm/195.5 GHz
280 C-band DWDM channels,100 GHz spacing, 1532.68 nm/195.6 GHz
276 C-band DWDM channels,100 GHz spacing, 1531.90 nm/195.7 GHz
272 C-band DWDM channels,100 GHz spacing, 1531.12 nm/195.8 GHz
268 C-band DWDM channels,100 GHz spacing, 1530.33 nm/195.9 GHz
264 C-band DWDM channels,100 GHz spacing, 1529.55 nm/196.0 GHz
260 C-band DWDM channels,100 GHz spacing, 1528.77 nm/196.1 GHz
256 C-band DWDM channels,100 GHz spacing, 1527.99 nm/196.2 GHz
Code Rate
N OC-192 SONET
without jitter filter
SOC-192 SONET
with jitter filter
F 10.66 Gb/s FEC
with jitter filter1
7 10.709 Gb/s FEC
with jitter filter1
G10 GbE with jitter filter1
MMulti-rate (SONET,
10 GbE, 10.66, 10.709 with
no jitter filter1
T 10.66 Gb/s FEC
without jitter filter1
P10.709 Gb/s FEC
without jitter filter1
Code Application
I2 IR-2 per GR-253-Core
S2SR-2 per GR-253-Core
LA LR ¾ 1550 APD Rx
LPLR with PIN Rx
LH LR ¾ APD Rx (High power)
Code Connector/
Pigtail Length
FFC/UPC/1 m pigtail length
LLC/SPC/1 m pigtail length
SSC/UPC/1 m pigtail length
Code Temperature Range,
Package
A -50 to 70 °C case,
2.2” x 3.0” x 0.53” flat top
package with no heat sink
C -50 to 70 °C case,
3.5” x 4.0” x 0.53” package
with flat top and integrated
heat sink fins-down
PH1-
1. Future option.
2. Please consult JDSU for
other DWDM channel option.