STPR1040CTW SUPER FAST GLASS PASSIVATED RECTIFIER REVERSE VOLTAGE - 400 Volts FORWARD CURRENT - 10 Amperes FEATURES TO-220AB * Glass passivated chip * Superfast switching time for high efficiency * Low forward voltage drop and high current capability * Low reverse leakage current MECHANICAL DATA * Case: JEDEC TO-220AB * Case Material: Plastic material, UL flammability classification 94V-0 * Moisture Sensitivity: Level 1 per J-STD-020C * Terminals: Lead Free Plating * Polarity indicator: As marked on the body * Weight: 0.08 ounces, 2.24 grams * Component in accordance to RoHs 2002/95/EC * ESD capability : HBM_8KV (JESD22-A114) * Maximum mounting torque = 0.5 N.m (5.1 Kgf.cm) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. PARAMETER SYMBOL STPR1040CTW UNIT Device marking code Note STPR1040CTW --- Maximum Repetitive Peak Reverse Voltage VRRM 400 V IF 10 A Peak Forward Surge Current 8.3ms single half sine-wave IFSM 80 A Storage temperature range TSTG -55 to +150 C TJ -55 to +150 C Average Rectified Output Current See FIG.1 Operating junction temperature range PARAMETER Breakdown voltage TEST CONDITIONS IR=10uA IF=5A Forward Voltage (1) IF=10A Leakage Current Reverse recovery time Junction Capacitance VR=200V IF= 0.5A Irr= 0.25A IR =1.0A VR=4V Freq.=1MHz THERMAL CHARACTERISTIC SYMBOL Min. Max. UNIT Tj=25C Tj=25C Tj=125C Tj=25C Tj=125C Tj=25C Tj=100C VB --1.30 1.20 1.50 1.40 10 250 V IR 400 ------------- Tj=25C trr --- 35 ns Tj=25C Cj --- 50 pF VF SYMBOL Typical V uA UNIT Typical thermal resistance_Junction to Case (2) RJC 4.2 C/W Typical thermal resistance_Junction to Lead (2) RJL 6.0 C/W Note : (1) 300us Pulse Width, 2% Duty Cycle. (2) Thermal Resistance test performed in accordance with JESD-51. RJL is measured at the PIN 2, RJC is measured at the top centre of body. REV. 2, Feb-2012, KTGC43 RATING AND CHARACTERISTIC CURVES STPR1040CTW FIG.1- FORWARD CURRENT DERATING CURVE 12 FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT 90 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) With heatsink_50*50*2 mm copper plate 10 8 6 Without heatsink 4 2 80 70 60 50 40 30 20 8.3ms Single Half Sine-Wave 10 0 0 0 25 50 75 100 125 150 175 1 10 CASE TEMPERATURE, ( ) FIG.4- TYPICAL JUNCTION CAPACITANCE FIG.3- TY PICAL FORWARD CHARACTERISTICS 100 CAPACITANCE, (pF) 100 10 1 Tj=25 10 Tj=25, f=1MHz 0.1 0.4 0.6 0.8 1 1.2 1 0.1 1.4 1 10 REVERSE VOLTAGE, (V) INST ANTANEO US FORW ARD VO LTAGE, (V) FIG.5- TY PICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) 100 NUMBER OF CYCLES AT 60Hz Tj=100 1 Tj=25 0.1 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (V) 120 100 Legal Disclaimer Notice STPR1040CTW Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.