3/8”-32UNF
DIA.
3 PLCS.
2.0
(.079)
3/8”-32UNF
DIA.
3 PLCS.
4.0
(.158)
2.4
(.094)
9.5
(.374)
DIA.
DIA.
WASHER
PLAIN
SHAFT
18 TEETH
KNURLED
SHAFT
NUT
12.6
(.496) 12.0
(.472)
2.0
(.079)
6.35
(.250)
0.5
(.020)
DIA.
6.00
(.236)
DIA.
1.0
(.039)
24.6
(.969)
DIA.
9.5
(.374)
12.2
(.480)
19.0
(.748)
6.0
(.236)
24.6
(.969)
6.7
(.264)
4.0 x 1.5
(.158 x .059)
6.7
(.264)
30 °
60 °
FULL CCW
UNDER =
10.0
(.394)
TOLERANCES:
±0.3
(±.012) =
10.0 ~ 100
(.394 ~ 3.937)
±0.5
(±.020)
1 2 3
3/8”-32UNF
PLAIN
SHAFT
(LONG)
18 TEETH
KNURLED
SHAFT
(LONG)
6.35
(.250) DIA.
6.00
(.236) DIA.
1.0
(.039)
24.6
(.969)
DIA.
19.0
(.748)
12.2
(.480)
27.5
(1.083)
6.0
(.236)
0.5
(.020)
Features
■ Carbon element
■ Plain or knurled shaft option
■ Metal bushing
■ Metal shaft
■ Rear solder lugs
■ Audio or linear taper options
■ Variety of resistance values
■ Detent at “no-load” position
■ RoHS compliant*
PDB241-GNL Series - “No-Load” Guitar Potentiometer
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
Electrical Characteristics
Taper ........................................Audio, linear
Standard Resistance ........ 10K to 1M ohms
Standard Resistance Tolerance ........ ±20 %
Environmental Characteristics
Operating Temperature
....................................-10 °C to +70 °C
Power Rating ................................0.25 watt
Maximum Operating Voltage ..............250 V
Rotational Noise .....................150 mV max.
Mechanical Characteristics
Mechanical Angle ........................300 ° ±5 °
Rotational Torque .............. 50 to 150 gf-cm
Stop Strength .........................8 kg-cm min.
Rotational Life ...............15,000 cycles min.
Detent Position ................................... 300 °
Detent Torque ......................100-300 gf-cm
Soldering Condition
Manual Soldering
........................300 °C within 3 seconds
Wave Soldering
........................260 °C within 3 seconds
Hardware .......................... Two fl at washers
and two mounting nuts supplied
per potentiometer
Derating Curve
Ambient Temperature (°C)
20 40 50 60 70 80 90 1003010
0
20
33
40
60
80
100
0
Rating Power Ratio (%)
Product Dimensions
DIMENSIONS: MM
(INCHES)
Standard Resistance Table
Resistance Resistance
(Ohms) Code
10,000 103
25,000 253
50,000 503
100,000 104
250,000 254
300,000 304
500,000 504
1,000,000 105
Circuit How To Order
PDB24 1 - GNL 01 - 504 A2
Model
Number of Units
1 = Single
Guitar Pot Designator
Confi guration
01 = Knurled Shaft (18-Tooth) /
Solder Lugs
02 = Plain Shaft / Solder Lugs
03 = Knurled Shaft (18-Tooth, Long) /
Solder Lugs
04 = Plain Shaft (Long) / Solder Lugs
11 = Knurled Shaft (24-Tooth) /
Solder Lugs
13 = Knurled Shaft (24-Tooth, Long) /
Solder Lugs
Resistance Code (See Table)
Resistance Taper (See Taper Charts)
*RoHS COMPLIANT
1
2
3
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
PDB241-GNL Series - “No-Load” Guitar Potentiometer
Taper Chart
010
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
A2 Taper
Terminal 1-2 Output Voltage
Terminal 1-3 Input Voltage X 100 (%)
Rotational Travel (%)
Inquire for availability of other tapers.
REV. 11/13
010
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
B0 Taper
Terminal 1-2 Output Voltage
Terminal 1-3 Input Voltage X 100 (%)
Rotational Travel (%)
