Non-contact Testers
The market leading is the original compact non-contact
tester to check for the presence of an AC voltage in cables, wall
sockets, fuses, circuit breakers and junction boxes.
Safe and easy to operate, simply apply the close to the
area to be tested and, where a voltage is detected, the red light
indicator clearly illuminates.
• 230Y • 110 • SOUND
• LV50 • Magnet
Stick
• EX230 • PRO230 • Magnet
Stick EX
• PRO12
The complete Volt Stick range:
• EX110
Volt Stick SOUND:
Identical to the
Volt Stick
230 but now featuring a detection buzzer for
even greater clarification. Also ideal for ‘detection around corners’, in bright
daylight and in awkward out of sight areas.
High visibility green tube for ease of identification if dropped or hidden in the
toolbox. Optimised for 230v AC.
(Actual size)
Volt Stick 230:
The original and still the best,
Volt Stick
is the instrument for safely checking for the presence of an
AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction
boxes, etc. No current flow is needed for correct operation.
The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to
any connection point, or moving it along any insulated cable.
All
Volt Stick
models are fully approved to IEC 61010-1,
CAT111 1000v AC and CE.
Is yours??
Applications:
• Locates breaks in cables
• Detects blown fuses inside plugs or fuse holders
• Distinguishes between live and neutral
wires in both single and three-phase supplies
• Identifies voltage-carrying cables in junction boxes
• Identifies faulty in-line switches
• Locates defective in-series light bulbs
• Optimised for 230v AV
Non-contact Testers
Volt Stick PRO230:
The unique
Volt Stick
PRO 230 now features a unique ‘shielded’ forktip
for highly selective and accurate testing for presence of AC voltage in
single core cables or wires. Ideal for use with cable bundles in trunking
or conduit. Optimised for 230v AC.
Volt Stick 110:
This high sensitivity version of the
Volt Stick
provides instant, non-contact
checking for the presence of AC voltage down to 110v, without making any
disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes
etc.
This 110v version is ideal for construction site temporary supplies and, of course, for use in mains
testing in the USA.
• Special flat tip for use on US-style sockets
• Optimised for 110v AC
Volt Stick PRO12:
12v AC version now also available!
Sensitivity
without adaptor
Sensitivity with
adaptor
Non-contact Testers
Magnet Stick:
The
Magnet Stick
provides safe and simple checking for the
presence of magnetism.
Upon testing and without metallic contact, the lamp lights immediately where there is a magnetic field (e.g. an activated coil in
a solenoid valve). Equipment can be tested without having to switch it off and magnetic coils can often be tested through their
protective cover, saving hours of dismantling time.
The
Magnet Stick
responds to all kinds of magnetic fields from alternating or direct current, to permanent magnets.
Applications:
• Testing operating solenoid valves in pneumatic and hydraulic control equipment
• Testing relays with coils and electrically-controlled solenoid valves in all types of
vehicles and machines
• Testing solenoid valves when servicing oil burners
‘A must-have tool for plumbers,
refrigeration engineers and car
mechanics’
Volt Stick Proving Unit:
This newly-developed Proving Unit has been specifically designed to test the functionality of the
Volt Stick
230v range and LV50. The instrument internally generates a 220 ~ 240v source when the
tip of a Volt Stick is inserted into the test portal of the Proving Unit.
Always test the operation of the Volt Stick with the Proving Unit prior to use and immediately following
use to ensure the Volt Stick is operating correctly.
• Suitable for use on Volt Sticks with a 4mm diameter tip that works on 220 ~ 240v, 50/60Hz AC
supplies. (Not suitable for PRO12, PRO 230 and 110v models).
Volt Stick LV50:
THIS PRODUCT COULD SAVE YOUR LIFE!
This high sensitivity version (testing down to 50v) is also intrinsically-safe, making it an essential ‘life-
saver’ testing tool for utilities engineers as well as for use in hazardous areas such as chemical plants, oil
refineries, off shore rigs and explosive environments.
Used as a safety device to make sure metallic surfaces, pipework and cables are safe from potentially
lethal voltages, the LV50 has already been specified by many leading utilities suppliers as manadtory kit
for all engineers.
• IECEx and ATEX approved voltage indicator for use in explosive environments
• Voltage indicator with safety handguard to avoid unintentional contact with live conductors
• Voltage range 50 ~ 1000v AC
• Insulated for safe use
Nemko 03ATEX 1456, IECEx NEM 07.0001,
NEMKO 0470
Magnet Stick EX:
The ATEX-Approved version of the
Magnet Stick
for use in hazardous
areas such as chemical plants, oil refineries,offshore rigs and explosive
enviroments.
For features see standard
Magnet Stick
above.
Nemko 03ATEX 1457, NEMKO 0470,EEx-
ib11CT4
Volt Stick EX110 & EX230:
The intrinsically-safe EX110 & EX230 are ATEX approved for use in hazardous areas
such as chemical plants, oil refineries, off shore rigs and explosive environments.
For features please see standard
Volt Stick 110 & 230
models opposite.
Nemko 03ATEX 1456, IECEx NEM 07.0001,
NEMKO 0470
SMM 202, SMM 203 & SMM 204
Smart Multimeters
Smart multimeters that automatically know what to measure. If there
is a voltage, the multimeter measures the voltage. If there is resistance,
it measures resistance. Quite simply SMART.
SMM-202 and SMM-203 have smart measurement functionality, while
SMM-204 also has an option for manual measurement selection, functions
such as diode testing, continuity buzzer and capacitance measurement,
can be selected at the touch of a button. All instruments feature automatic
shutoff to conserve battery life.
Instruments are supplied with batteries and thin, flexible silicone-insulated
leads.
Features:
• Voltage AC/DC 0 ~ 600v (SMM 202, 203 & 204)
• Current AC/DC 0 ~ 4A (SMM 203 & 204)
• Resistance 0 ~ 40m Ohm (SMM 202, 203 & 204)
• Buzzer (<100 Ohm) (SMM 204 only)
• Capacitance 0.01nF ~ 4000 uF (SMM 204 only)
• Hold and Min-Max functions (SMM 204 only)
Specifications:
DMM 902, DMM 903 & DMM 904
Pocket-Sized Multimeters
A handy, pocket-sized everyday meter for every engineer, with the added
benefit of a built-in
Volt Stick
and torch.
Despite their small format, these instruments have a very high safety
approval (CAT IV 600v, CAT III 1000v). They are protected against
overloading by an electronic fuse. When not in use, the test probes
can be parked at the rear of the instrument body.
Features:
• LCD display with backlight
• Built-in non-contact AC voltage detector plus flashlight
• Measures voltage, resistance, diode function & continuity
• Double-moulded case
• CAT III 1000v, CAT IV 600
• Auto-ranging with auto power off
• Silicone test leads
• Protective holster
Specifications:
Model DMM 902 DMM 903 DMM 904
Display 2000-count 2000-count 4000-count
DC Voltage Ranges 0.1mv ~ 600v
AC Voltage Ranges 1mv ~ 600v
AC/DC Current - 0.1μA ~ 200mA 0.1μA ~ 200mA
Resistance 0.1Ω ~ 20mΩ 0.1Ω ~ 20mΩ 0.1Ω ~ 40mΩ
Capacitance - - 1pF ~ 200μF
Frequency - - 0.001Hz ~ 10KHz
Measuring Rate 2 per second
Dimension 104(H) x 54(W) x 36(D) mm
Weight 145g
Power Supply 2 x AAA 1.5v batteries (inc)
Approvals CAT III 1000v, CAT IV 600v
Safety Standards EN 61010-1, CE, Pollution Degree II
Model: SMM 202: SMM 203: SMM 204:
Display 3 3/4 Digits, 4000 Counts, Updates 3sec
AC/DC Voltage Ranges 0 ~ 500v
AC/DC Current - 0 ~ 4A 0 ~ 4A
Ohm 0Ω ~ 40mΩ
Diode Test - - Yes, approx 2.8v
Buzzer - - Yes < approx 100Ω
Capacitance - - 0 ~ 4000μF
Max Voltage Between any terminal and earth ground 600v RMS
Overload Indication ‘OL’ displayed in top right of the LCD
Dimension 161(H) x 84(W) x 30(D) mm
Weight 210g 210g 215g
Power Supply 2 x 1.5V AA alkaline (included)
Safety Standards Standards of IEC61010 Pollution Degree 2
Extremely compact
meters
All DMM models are autoranging and have diode test, continuity buzzer,
auto power off and ion battery indicator.
