Single Row IDC Header Series 8284 IDC header/socket for 0.100" (2.54mm) pitch IDC for 0.100" (2.54mm) round conductor flat cable uses similar 8289/8290 contact components recognized under UL & CSA specifications, but housed in a single row insulator format. The header is a 1-piece insulator with right angle, straight solder or press-fit terminations. The socket is a 2-piece insulator design with IDC contacts suitable for termination to 26/28 AWG stranded ribbon cable or dip solder terminations. TECHNICAL SPECIFICATION Material: Molding - UL94VO rated grey polyester Contact - Brass Current Rating: 1.5 Amp maximum at 25C 1 Amp maximum at 70C Dielectric Withstanding Voltage: 1050V DC or AC peak Mechanical Endurance: Standard tin plating - 10 cycles Voltage Rating: 350V DC or AC peak Insertion/Withdrawal Forces: 2.7N max insertion force per contact 0.2N min withdrawal force per contact Contact Resistance: 20 milliohms maximum Insulation Resistance: 1000 megohms Operating Temperature: -55C to +125C DIMENSIONS: HEADER millimeters (inches) No. of Positions A 8 14 16 18 20 24 7 13 15 17 19 23 B C D E F G 17.78 (0.70) 33.02 (1.30) 38.10 (1.50) 43.18 (1.70) 48.26 (1.90) 58.42 (2.30) 21.30 (0.84) 36.54 (1.44) 42.22 (1.66) 46.70 (1.84) 52.38 (2.06) 61.94 (2.44) 18.54 (0.73) 33.78 (1.33) 38.86 (1.53) 43.94 (1.73) 49.02 (1.93) 59.18 (2.33) 19.30 (0.76) 34.54 (1.36) 39.62 (1.56) 44.70 (1.76) 49.78 (1.96) 59.94 (2.36) 23.70 (0.93) 38.94 (1.53) 44.02 (1.73) 49.10 (1.93) 54.18 (2.13) 64.34 (2.53) 17.54 (0.69) 32.78 (1.29) 37.86 (1.49) 42.94 (1.69) 48.02 (1.89) 58.18 (2.29) ORDERING CODE 10 8284 014 Connector Code Prefix 10 = Header Connector Series Number Number of Contacts 008 = 8 position 014 = 14 position 016 = 16 position 018 = 18 position 020 = 20 position 024 = 24 position Not all versions are available, please check with AVX Customer Service for availability. 8 000 Contact Variation 000 = 0.110" (2.8mm) Straight PC Tail 001 = 0.146" (3.7mm) Straight PC Tail 002 = 0.110" (2.8mm) R.A. PC Tail 003 = 0.146" (3.7mm) R.A. PC Tail 009 = 0.209" (4.5mm) Straight PF Tail 030 Plating Variation 030 = Tin plating, 10 cycles 040 = Gold plating, 50 cycles