Fiber Optic Products Catalog Rugged Fiber Optic Products Product Facts Expanded Beam PRO BEAM Sr.Connectors PRO BEAM Jr.Connectors PRO BEAM Mini Connectors Mini 38999 Mini ARINC Mini GPRC LuxCis Optical Termini One common terminus for GPRC, 38999, ARINC, Quadrax Cavity Reducers Sealed Circular LC ODVA Conforming Connector Expanded Beam Products Tyco Electronics is proud to offer a full rugged fiberoptic product family. With Tyco Electronics' Expanded Beam, LuxCis Optical Termini, and the PRO BEAM Sr., Jr. & Mini Connectors Sealed Circular LC ODVA Conforming Connector, the end user is guaranteed a complete choice that meets their cost and optical performance needs in multiple industries. For specific information, please contact your local Tyco Electronics Sales Representative. LuxCis Optical Termini LuxCis is a trademark of Radiall, S.A. Product is manufactured under license from Radiall, S.A. LuxCis Optical Termini Sealed Circular LC ODVA Conforming Connector 14 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) PRO BEAM Sr., PRO BEAM Jr. and PRO BEAM Mini Connector field deployable interconnects ARINC 600 connectors, with inserts/holder blocks designed for Mini Expanded Beam -- up to 128 channels on size 3 ARINC 600 MIL-C-38999 Series III shell size 11 style circular connectors -- Cable assemblies up to 4 fibers Unique Modular Design, for use with multimode and singlemode fiber Tactical cables, cable reels, backpacks Cable assembly and termination services Ball lens expands crosssectional area of light over 200 times for multimode and over 2000 times for singlemode Rugged hermaphroditic construction (i.e., same insert mates to each other) Physically non-contacting mating conditions; no wear, installed fiber ferrule protected by ball lens Connectors/Adapters/ Tooling & Accessories Expanded Beam Products Product Facts Expanded Beam Technology From left to right: PRO BEAM Sr., PRO BEAM Jr. & Mini Expanded Beam inserts. Fiber Optic Interconnect/ Cable System using Expanded Beam technology, which physically expands and collimates the transmission signal into an optical beam over 14 times its original diameter (the cross sectional area of the light beam increases over 200 times for multimode optical signals). For singlemode signals, the collimated beam is over 45 times its original diameter (the cross- Expanded Beam Principle sectional area of the light beam increases over 2,000 times.). It is then refocused back down onto the core of the receiving fiber. This approach provides ease of alignment and low sensitivity to thermal changes and contamination. High strength, precision connector housings enhance a durable connection, optimizing low loss and repeatable performance. Product Facts 1 Suitable for aerospace, avionics, field-deployable communications, marine ship-to-shore applications, security systems, mobile diagnostic units, oil and gas exploration and other harsh environment applications demanding strength, durability and reliable performance in conditions of multiple coupling/ decouplings, blindmate situations, and high vibration. Expanded Beam Inserts No wear on fiber optic interface; Very vibration resistant Easy to handle, easy to clean. Durable connection that is highly resistant to dirt/debris Singlemode or multimode Common 850/1300 Dual Wavelength, 1310, or 1550 nm wavelengths Easy alignment for low-loss, repeatable performance Consistent overall optical "link budget" assured Low sensitivity to thermal fluctuations and interface contamination Repeatable low-loss performance in harsh environments PRO BEAM Sr. Insert -- the original, larger format, Field Tactical, hermaphroditic Connector System PRO BEAM Jr. Insert -- the second generation, reduced size, Field Tactical Connector System Mini Expanded Beam Insert for multi-channel small form factor -- the smallest expanded beam multi-channel insert in the industry, a Tyco Electronics exclusive 15 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) PRO BEAM Jr. Connectors Performance Specifications Optical, Multimode Version Insertion Loss, Typical -- 0.7 dB @ 1300 nm* Optical, Singlemode Version Insertion Loss, Typical -- 0.7 dB @ 1310 nm or 1500 nm* Return Loss -- > 34 dB @ 1310 nm or 1550 nm** *When tested with reference quality launch/receive cable assemblies **RL Tested Open Ended PRO BEAM Jr. Cable Connector, Plug Mechanical Vibration, Sinusoidal -- 10 - 500 Hz, 3 directions; 0.75 mm amplitude @ 10g acceleration Bump -- 4,000 Bumps, 6 directions @ 50g acceleration Free Fall -- 500 falls on concrete; Severity 1.2 m Coupling Endurance -- 3,000 couplings Weight -- Plug -- 123 grams, typical D-Hole bulkhead -- 102 grams, typical Panel Cutout Front View PRO BEAM Jr. Square Flange Mount Bulkhead Temperature Operational Temperature -- -40C/+85C Storage Temperature -- -55C/+85C Temperature, Cyclic -- -55C/+85C Humidity (Damp Heat) --95% RH Immersion Water -- 15 m depth (plug) 15 m (Bulkhead) PRO BEAM Jr., Low Profile, Square Flange Mount Bulkhead Material and Finish Shell Alloy -- Aluminum; or nickel aluminum bronze (high saline environment) Plating (For Aluminum Shells Only) -- clear hard anodized; or green chromate conversion zinc (PRO BEAM Jr. Bulkheads only) Recommended D-hole Panel Cutout Bulkhead Connector Panel Thicknesses PRO BEAM Jr. Bulkhead Connector D-Hole -- 4 mm max. PRO BEAM Jr. Bulkhead Connector Square Flange -- 6 mm max. PRO BEAM Jr. D-Hole Bulkhead, Standard Cable Adapter PRO BEAM Jr. Low Profile D-Hole Bulkhead 16 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Connectors/Adapters/ Tooling & Accessories PRO BEAM Jr. Connectors (Continued) 1 Standard Bulkhead Cable Adapter, with Boot Environmentally Sealed Bulkhead Cable Adapter, with Boot PRO BEAM Jr. Replacement Receptacles for TFOCA-II Panel Mount Connector Applications (see page 18 for Part Numbers) Panel Cutout Dimensions PRO BEAM Jr. D-Hole Low Profile Buffered Fiber Bulkhead Replacement Connector for TFOCA-II Product TFOCA-II is a trademark of Amphenol Fiber Systems International. PRO BEAM Jr. Square Flange, Low Profile, Buffered Fiber Bulkhead Replacement for TFOCA-II Product 17 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) PRO BEAM Jr. Connectors (Continued) PRO BEAM Jr. Connector Shell Kits Description PRO BEAM Jr. Plug w/EPDM rubber PRO BEAM Jr. Plug w/Fluorosilicone rubber PRO BEAM Jr. D-Hole Low Profile, Buffered Fiber Bulkhead PRO BEAM Jr. D-Hole Standard Bulkhead PRO BEAM Jr. D-Hole Sealed Bulkhead PRO BEAM Jr. Square Flange Low Profile Buffered Fiber Bulkhead PRO BEAM Jr. Square Flange Standard Bulkhead PRO BEAM Jr. Square Flange Sealed Bulkhead Connector Assembly 1 Shell Kit 1 Insert Kit 1 Cable Adapter Kit* X Ferrule Kits (X = No. of optical channels) Part Numbers listed are Shell alloy = aluminum Plating = hard anodized. Consult Tyco Electronics for other plating/material options such as NiAlBz for Naval applications. Part Number 1754436-1 1754436-2 1693741-1 1754437-1 1754438-1 1754439-1 1754440-1 1754441-1 PRO BEAM Jr. Replacement Receptacles for TFOCA-II Panel Mount Connector Applications Description PRO BEAM Jr. TFOCA-II Replacement D-Hole Low-Profile Buffered Fiber Bulkhead PRO BEAM Jr. TFOCA-II Replacement D-Hole Sealed Bulkhead PRO BEAM Jr. TFOCA-II Replacement Square Flange Low-Profile Buffered Fiber Bulkhead PRO BEAM Jr. TFOCA-II Replacement Square Flange Sealed Bulkhead Part Number 1754445-1 1754446-1 1754447-1 1754448-1 PRO BEAM Jr. Insert Kits Description 2 x 850 / 1300 nm Multimode 2 x 1310 nm Singlemode 2 x 1550 nm Singlemode 4 x 850 / 1300 nm Multimode 4 x 1310 nm Singlemode 4 x 1550 nm Singlemode Part Number 1515743-1 1515739-1 1516040-1 1515747-1 1515740-1 1516041-1 Ferrule Kits Fiber Hole Size 125 m 126 m 126 m Mode SM SM MM PRO BEAM Connector Jr. Jr. Jr. Part Number 1588908-2 1588908-1 1588700-1 PRO BEAM Jr. Connector Plug & Sealed Bulkhead Cable Adapter Kits Cable Dia. (Max.) 3.10 .122 3.60 .142 4.10 .161 4.60 .181 5.10 .201 5.65 .222 6.10 .240 6.70 .264 7.50 (Breakout Cable Only) .295 7.50 .295 Technical Documents Product Specification 108-2177 Design Objectives Application Specification 114-13099 Instruction Sheets 408-8791 Grounding D-Hole Bulkhead 408-8797 Plug 408-8798 Standard D-Hole Bulkhead 408-8811 Sealed D-Hole Bulkhead 408-8834 Low Profile Square Flange Bulkhead 408-8840 Low Profile D-Hole Bulkhead 408-8841 Standard Square Flange Bulkhead http://www.tycoelectronics.com/documents Part Number 1515814-1 1515781-3 1515848-2 1516147-1 1515834-2 1515827-2 1515859-3 1588116-1 1828168-1 (Plug) 1754719-3 (Sealed Bulkhead) PRO BEAM Jr. Connector Standard Bulkhead Cable Adapter Kits* Cable Dia. (Max.) 3.10 [.122] 3.60 [.142] 5.10 [.201] 5.65 [.222] 6.10 [.240] 4 x 3.00 [ 4 x .118] Part Number 1515791-2 1515808-1 1515835-2 1515829-1 1515796-2 1515749-1 *Standard Cable Adapter -- Not applicable for Low Profile. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 18 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Connectors/Adapters/ Tooling & Accessories PRO BEAM Jr. Connectors (Continued) Spare Parts & Tools Technical Documents Product Specifications 408-8857 Curing Fixtures for PRO BEAM Jr. and Sr. Connectors 408-8828 Cleaning Procedure for EB C/A's Tooling Specifications 408-8795 Crimp Tool with Die Set for PRO BEAM Jr. and Sr. Connectors 408-10022 Die Assembly for Mini and Jr. Circular Crimps http://www.tycoelectronics.com/documents 1 Curing Fixtures Connector PRO BEAM Jr. Cable Plug (having cable with KEVLAR strength member fiber) PRO BEAM Jr. Sealed D-Hole Bulkhead PRO BEAM Jr. Standard D-Hole and Square Flange Bulkhead PRO BEAM Jr. Low Profile Buffered Fiber Bulkhead Part Number 1693797-1 1693800-1 1754122-1 Instruction Sheet 408-8857. Available at www.tycoelectronics.com Cable Crimp Components Description Crimp Sleeve (use with all PRO BEAM Jr. Connector Crimp Support sizes) 2.2 mm Crimp Support 3.1 mm Crimp Support 3.6 mm Crimp Support 3.8 mm Crimp Support 4.1 mm Crimp Support 4.6 mm Crimp Support 5.1 mm Crimp Support 5.65 mm Crimp Support 6.1 mm Crimp Support 6.5 mm Crimp Support 6.7 mm Crimp Support Square Crimp Support for (4) 3 mm Cables Part Number 1515269-2 1515567-1 1515568-1 1515569-1 1515570-1 2-1515270-0 1516142-1 1515571-1 1515572-1 1515573-1 1515574-1 1515575-1 1515632-1 Ferrule Kits Fiber Hole Size 125 m 126 m 126 m Mode SM SM MM PRO BEAM Jr. Jr. Jr. Part Number 1588908-2 1588908-1 1588700-1 Protective Caps Description Standard cap, for D-Hole Bulkhead Standard cap, for Flange Mount Bulkhead Standard cap, for connector plug PRO BEAM Jr. Jr. Jr. Part Number 1515868-1 1515787-2 1515867-1 KEVLAR is a trademark of E. I. du Pont de Nemours and Company. Note: All part numbers are RoHS compliant. 19 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) PRO BEAM Mini Connectors Tyco Electronics is pleased to announce the natural extension from our PRO BEAM Sr. and Jr. Connector product lines. The PRO BEAM Mini Connector saves space and weight and is perfect for high density applications. The product offers the same durability as its larger counterparts. PRO BEAM Sr., Jr. & Mini Connectors PRO BEAM Mini Plug Connector PRO BEAM Mini Connector Shell Kits Connector Assembly 1 Shell Kit 1 Insert Kit 1 Cable Adapter Kit* X Ferrule Kits (X = No. of optical channels) Mount Style Type Attribute Difference Plug D-Hole Bulkhead Square Flange *Not applicable for Low Profile EPDM Grip Low Profile - Buffered Fiber Low Profile - 1.8 Jacketed Sealed Low Profile - Buffered Fiber Neutrik Cutout-Drop-In (HA Aluminum) 1828698-1 1828699-1 1985140-1 1918185-1 1828826-1 1918603-1 Part Number (OD Aluminum) N/A 1828699-2 1985140-2 * * * (NiAlBronze) 1828698-2 1828699-3 1985140-3 1918185-2 * * * Contact Tyco Electronics for availability. PRO BEAM Mini Insert Kits Description 2 x 850 / 1300 nm Dual Multimode 2 x 1310 nm Singlemode 2 x 1550 nm Singlemode 4 x 850 / 1300 nm Dual Multimode 4 x 1310 nm Singlemode 4 x 1550 nm Singlemode Part Number 1374759-4 1588129-2 1588128-2 1374759-2 1588129-3 1588128-3 Ferrule Kits Fiber Hole Size 125 m 126 m 126 m Mode SM SM MM PRO BEAM Connector Mini Mini Mini Part Number 1754700-1 1754700-2 1754699-1 PRO BEAM Mini Cable Adapter Kits For Plug Cable Diameter 5 mm 5.5 mm 6 mm Part Number 1828700-1 1828700-2 1828700-3 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 20 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Connectors/Adapters/ Tooling & Accessories PRO BEAM Mini Connectors (Continued) Performance Specifications Optical, Multimode Version Insertion Loss, Typical -- 0.7 dB @ 1300 nm* Optical, Singlemode Version Insertion Loss, Typical -- 0.8 dB @ 1310 nm* Return Loss -- > 34 dB @ 1310 nm or 1550 nm** *When tested with reference quality launch/receive cable assemblies **RL Tested Open Ended 1 PRO BEAM Mini Cable Connector, Plug Mechanical Vibration, Sinusoidal -- 10 - 500 Hz, 3 directions; 0.75 mm amplitude @ 10g acceleration Bump -- 4,000 Bumps, 3 directions @ 40g acceleration Free Fall -- 500 falls on concrete; Severity 1.2 m Coupling Endurance -- 3,000 couplings Weight -- Plug -- 50 grams, typical D-Hole bulkhead -- 39 grams, typical Temperature Recommended Panel Cutout PRO BEAM Mini D-Hole Bulkhead, Buffered Fiber, Low Profile Operational Temperature -- -40C/+85C Storage Temperature -- -55C/+85C Temperature, Cyclic -- -55C/+85C Humidity (Damp Heat) --95% RH Immersion Water -- 5 m depth (plug) 2 m (Bulkhead) Pressure Recommended Panel Cutout Low Pressure -- 25 kPa @ -55C Material and Finish Shell Alloy -- Aluminum; or nickel aluminum bronze (high saline environment) Plating (For Aluminum Shells Only) -- clear hard anodized; or green chromate conversion zinc (PRO BEAM Jr. Bulkheads only) PRO BEAM Mini Low Profile, Square Flange Mount Bulkhead Technical Documents 408-10065 Plug 408-10067 Square Flange Bulkhead 408-10069 Low Profile D-Hole Bulkhead 408-10076 Sealed D-Hole Bulkhead http://www.tycoelectronics.com/documents Recommended Panel Cutout PRO BEAM Mini Bulkhead with XLR Flange 21 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) PRO BEAM Mini Connectors (Continued) 36.00 [1.417] 22.00 [.866] 11.00 [.433] 0.10 O 3.40 +- 0.00 + .004 [.134 - .000 ] 4 Plcs. 3.00 [.118] 0.20 O 19.00 +- 0.00 + .008 [.748 - .000 ] O 21.00 [.827] O 18.00 [.709] 24.00 [.945] 2 Plcs. 31.00 [1.220] 19.00 [.748] 2 Plcs. Recommended Panel Cutout PRO BEAM Mini Low Profile, Alternate Square Flange Mount Bulkhead 40.00 [1.575] 38.00 [1.496] O 31.00 O 21.00 [.827] [1.220] 0.20 O 24.00 +- 0.00 + .008 [.945 - .000 ] O 16.00 [.630] 0.20 22.00 +- 0.00 + .008 [.866 - .000 ] O 20.00 [.787] Recommended Panel Cutout PRO BEAM Mini D-Hole Bulkhead, Sealed Mil-Tactical Cable 22 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Connectors/Adapters/ Tooling & Accessories PRO BEAM Sr. Connectors Performance Specifications Optical, Multimode Version Insertion Loss, Typical -- 0.7 dB @ 1300 nm* Optical, Singlemode Version Insertion Loss, Typical -- 0.7 dB @ 1310 nm* Return Loss -- > 34 dB @ 1310 nm or 1550 nm** *When tested with reference quality launch/receive cable assemblies **RL Tested Open Ended Front View Cap Removed 1 PRO BEAM Sr. Cable Connector, Plug Mechanical Vibration, Sinusoidal -- 10 - 500 Hz, 3 directions; 0.75 mm amplitude @ 10g acceleration Bump -- 4,000 Bumps, 6 directions, @ 50g acceleration Free Fall -- 500 falls on concrete; Severity 1.2 m Coupling Endurance -- 3,000 couplings Weight -- Plug -- 290 grams, typical Chassis bulkhead -- 150 grams, typical Panel Cutout Front View Cap Removed PRO BEAM Sr. D-Hole Bulkhead with Standard Cable Adapter Temperature Operational Temperature -- -40C/+85C Storage Temperature -- -55C/+85C Temperature, Cyclic -- -55C/+85C Humidity (Damp Heat) --95% RH Immersion Water -- 5 m depth (plug), 2 m (Bulkhead) Material and Finish Panel Cutout Shell Alloy -- Aluminum; or nickel aluminum bronze (high saline environment) Plating (For Aluminum Shells Only) -- clear hard anodized Front View Cap Removed PRO BEAM Sr. Square Flange Mount Bulkhead with Standard Cable Adapter Bulkhead Connector Panel Thicknesses PRO BEAM Sr. D-Hole Connector -- 6.5 mm max. PRO BEAM Sr. Square Flange Connector -- 8.5 mm max. Technical Documents Product Specifications 408-8799 Plug 408-8800 D-Hole Bulkhead 408-8877 Square Flange Bulkhead Application Specification 114-13122 http://www.tycoelectronics.com/documents Please contact your local Tyco Electronics Sales Representative for Part Numbers and availability. 23 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) PRO BEAM Sr. Connectors (Continued) Connector Assembly 1 Shell Kit 1 Insert Kit 1 Cable Adapter Kit* X Ferrule Kits (X = No. of optical channels) *Not applicable for Low Profile Part numbers listed are Shell alloy = aluminum Plating = hard anodized. Consult Tyco Electronics for other plating/material options such as NiAlBz for Naval applications. PRO BEAM Sr. Connector Shell Kits PRO BEAM Sr. Plug w/EPDM rubber PRO BEAM Sr. D-Hole Standard Bulkhead PRO BEAM Sr. Square Flange Standard Bulkhead Part Number 1754842-1 1754843-1 1754844-1 PRO BEAM Sr. Insert Kits 2 x 850 / 1300 nm Multimode 2 x 1310 nm Singlemode 4 x 850 / 1300 nm Multimode 4 x 1310 nm Singlemode Part Number 1693001-1 1515734-2 1693001-2 1515735-1 Ferrule Kits Fiber Hole Size 125 m 126 m 126 m Mode SM SM MM PRO BEAM Connector Sr. Sr. Sr. Part Number 1515941-1 1515941-2 1588801-1 PRO BEAM Sr. Connector Plug Adapter Kits Cable Dia. (Max.) 5.10 .201 5.65 .222 6.20 .244 Part Number 1515940-1 1515940-3 1515940-5 PRO BEAM Sr. Connector Standard Bulkhead Cable Adapter Kits Technical Documents Product Specifications 408-8857 Curing Fixtures for PRO BEAM Jr. and Sr. Connectors 408-8828 Cleaning Procedure for EB C/A's Tooling Specifications 408-8795 Crimp Tool with Die Set for PRO BEAM Jr. and Sr. Connectors 408-10022 Die Assembly for Mini and Jr. Circular Crimps http://www.tycoelectronics.com/documents Cable Dia. (Max.) 5.10 .201 5.65 .222 Buffered Fiber Style Part Number Standard Cable Adapter 1515847-1 Standard Cable Adapter 1515724-2 Low Profile Adapter 1515299-2 Note: All part numbers are RoHS compliant. 24 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Featured Cable Assemblies TFOCA to PRO BEAM Jr. Plug Cable Assembly 1828536-1 Ruggedized cable assemblies custom tailored for field use in harsh environments Heavy-duty light-weight cable reel organizes and protects connectors and cable for easy pay-out and safe storage Connectors/Adapters/ Tooling & Accessories Cable Assemblies and Accessories Product Facts LP D-Hole Bulkhead to 4 ST 62.5/125 on 1.8 mm cable 6828454-1 Plug to Plug (100 meters) 6754475-2 1 Typical Reels and Reel Stands for Field-Deployable Cable Assemblies Options for 500 meter reels include special backpack harnesses, a separate reel stand, or a combination reel and reel stand Tactical Reel/Drum Options 1918930-1 Cable Reels Reel Capacity (Random Lay) Cable Diameter 5.0 mm 5.5 mm PRO BEAM Jr. Kits PRO BEAM Jr. Termination Kit 1828650-1 Cleaning Kit 1828335-2 225 M 186 M 297 M 570 M 998 M 1271 M 247 M 462 M 816 M 1052 M Notes/Description Reel & Reel Stand Combination Reel can be detached from stand without tools Reel* Reel* Reel* Reel* Flange Diameter Part Number 310 mm 1918930-1 310 mm 370 mm 460 mm 510 mm 1754515-1 1754515-2 1754515-3 1754515-4 * See Accessories options below Backpack with Reel Reel with Stand "Static Frame" Backpack Harness Accessories Description Backpack Backpack Backpack Static Frame Static Frame TFOCA-II is a trademark of Amphenol Fiber Systems International. Reel Diameter 370 mm Dia. Reel 460 mm Dia. Reel 510 mm Dia. Reel 500 mm Dia. Max 700 mm Dia. Max Part Number 1754516-1* 1754516-2* 1754516-3* 1754517-1* 1754517-2* * Reel must be ordered separately. Note: For lower cost alternative options. Please contact your local Tyco Electronics' Sales Representative or Tyco Electronics Product Information Center at 1-800-522-6752. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 25 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Tactical Field Splice Repair Kit Part Number 1985212-1 Materials List KEVLAR is a trademark of E. I. du Pont de Nemours and Company. Note: All part numbers are RoHS compliant. Quantity 4 10 1 1 2 1 1 1 1 40 1 1 1 1 1 1 1 Description Flexible Splice Housings Mechanical Splices Cleaver Cable Stripper Buffer Stripper (sizes): 126 micron, 200 micron Utility Knife with 3 Spare Blades KEVLAR Shears 6 inch Metal Ruler, (units in metric) Illuminated Microscope with Batteries Alcohol (at least 70%) Pads Wipes, 5 x 8 inch, 280 count box Plastic Frame Safety Glasses (ANSI approved lenses) Tweezers Roll Tape Fine Tip Marking Pen Set of Instructions (illustrated) -- Waterproof Portable Field Storage Case. This case shall be ruggedized and house all components necessary to repair broken cable. Dimensions of the case shall not exceed 7.5" H x 20" W x 14" -- Black in color. 26 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Connectors/Adapters/ Tooling & Accessories Optical Test Set for Fiber Optic Cables -- Designed for harsh environments Product Facts Especially designed to support the installation of optical links in the field Able to test both cable drums and entire links Powered by batteries with high autonomy Suitable for diagnostics and construction teams Easy to use, ergonomic, rugged design Suitable for cable length up to 10 km Supports up to 4 fibers per cable with various types of connectors 1 Diagnostic Features Power Meter Drum Test / Cable Test The optical power from any source can easily be measured with the power meter function. Test of an entire cable drum with automatic good/bad indication. The test of an entire cable is realized with a 2nd KPG-opt or a loop connector. Optical Source A continuous optical signal is generated and transmitted with selectable output power. Test Frames (optional) The KPG-opt can generate specific test frames as used in optical networks and LOS systems. Optical Tester Description 850 nm 38999 III Size 11 Optical Test Kit 850/1300 nm PRO BEAM Jr. Optical Test Kit 1310 nm PRO BEAM Jr. Optical Test Kit Part Number 1918016-1 1918016-2 1985006-1 For additional wavelength testers, contact your local Tyco Electronics Sales Representative. Protective Case 1918082-1 Note: All part numbers are RoHS compliant. 27 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) ARMOR-LIGHT Tactical Field Deployable Fiber Optic Cable for Extreme Environments (Metallic for Rodent Proof) 4-Color Optical Fiber Cable Specification for Armored Cable for Ruggedized Applications Construction: 4-color coded fibers Fiber types 50/125/250 m, 62.5/125/250 m and 9/125/250 m Stainless steel gel filled tube Stainless steel wire Jacket -- Nylon, black Fiber Type Part Number Outside Dia. (mm) Weight kg/km 62.5/125 50/125 SM 1588957-1 1588957-2 1588957-4 3.8 3.8 3.8 24 24 24 PA Jacket 850 nm 3.5 2.7 X Stainless Steel Tube Gel Filled Stainless Steel Wires Primary Coated Fiber Max. Attenuation dB/km 1300 nm 1310 nm 1550 nm 1.0 X X 0.9 X X X 0.40 0.25 Bandwidth MHz-km 850 nm 1300 nm 160 500 400 1200 X X Notes: 35 mm recommended bend radius. 3.1 kN breaking strength. 2-Color Optical Fiber Cable Specification for Armored Cable for Ruggedized Applications Construction: 2-color coded fibers Fiber types 50/125/250 m, 62.5/125/250 m and 9/125/250 m Stainless steel gel filled tube Stainless steel wire Jacket -- Nylon, black Fiber Type Part Number Outside Dia. (mm) Weight kg/km 62.5/125 50/125 SM 1693808-1 1693808-2 1693808-4 3.8 3.8 3.8 24 24 24 PA Jacket 850 nm 3.5 2.7 X Stainless Steel Tube Gel Filled Stainless Steel Wires Primary Coated Fiber Max. Attenuation dB/km 1300 nm 1310 nm 1550 nm 1.0 X X 0.9 X X X 0.40 0.25 Bandwidth MHz-km 850 nm 1300 nm 160 500 400 1200 X X Notes: 35 mm recommended bend radius. 3.1 kN breaking strength. Note: All part numbers are RoHS compliant. Non-Metallic Tactical Field Deployable Fiber Optic Cable Product Facts Technical Data All terrain field deployable cable, up to 4 fibers, singlemode or multimode Developed for deployment under the most demanding conditions Tight buffered fibers are protected by Aramid yarns and a tough ruggedized polyurethane sheath Tested in accordance with MIL-PRF-85045 Flexible, water resistant, high crush resistant, and lightweight, Designs available to be resilient against radiation exposure Mil-Standard Distribution Cable -- 2 Fiber Singlemode Attenuation -- 0.5 dB/km @ 1310 nm / 0.5 dB/km @ 1550 nm Diameter -- 5.8 mm Weight -- 25 kg/km Minimum Bending Radius -- 29 mm Crush Resistance -- 2000 N/cm Operating Temperature -- -55 C to +85 C Mil-Standard Distribution Cable -- 4 Fiber Singlemode Attenuation -- 0.5 dB/km @ 1310 nm / 0.5 dB/km @ 1550 nm Diameter -- 5.8 mm Weight -- 27 kg/km Minimum Bending Radius -- 28 mm Crush Resistance -- 2000 N/cm Operating Temperature -- -55 C to +85 C Mil-Standard Distribution Cable -- 2 Fiber Multimode Fiber Type -- 50 m/125 m and 62.5/125 Attenuation -- 3.5 dB/km @ 850 nm / 1.0 dB/km @ 1300 (62.5/125); 3.5 dB/km @ 850 nm / 1.5 dB/km @ 1300 (50/125) Mil-Standard Distribution Cable -- 4 Fiber Multimode Other fibers (i.e. Polyimide, Silicon buffer, Carbon coated, radiation hardened, etc.) are available upon request. Contact Tyco Electronics or your local Tyco Electronics Sales Representative for part numbers, pricing, and availability. Fiber Type -- 50 m/125 m and 62.5/125 Attenuation -- 3.5 dB/km @ 850 nm / 1.0 dB/km @ 1300 (62.5/125); 3.5 dB/km @ 850 nm / 1.5 dB/km @ 1300 (80/125) 28 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Connectors/Adapters/ Tooling & Accessories "Mini" Expanded Beam for Harsh Environments Product Facts Available in shell size 11, housed on D38999 Series III style shells for harness applications Multiple options available for backshells. Consult your local Tyco Electronics Sales Representative Shell polarizations A through E available upon request Plug Shell Kit 1 Standard Material and Finish Shell Alloy -- Aluminum Plating -- Nickel & green chromate D-Hole Receptacle Shell Kit Receptacle Panel Cut-Out (shell size 11) per MIL-DTL-38999K, figure 11 *Refer to customer drawing for dash number designation For part number details and plating options, contact your local Tyco Electronics Sales Representative. Square Flange Receptacle Shell Kit 38999 Plug Cap 1918024-1 38999 Receptacle Cap 1918025-1 = Jam Nut Receptacle 1918025-2 = Square Flange Receptacle Note: All part numbers are RoHS compliant. 29 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) "Mini" Expanded Beam for Harsh Environments (Continued) Use with: Finish: Plug: Jam-Nut Receptacle: Flange-Mount Receptacle: Mini EB 38999 Connector Shell Kits (N-Key) O1.8 mm Max Simplex Cable MIL-Tactical Distribution Cable Buffered Fiber Only Electroless Ni Plate OD Zn/Ni Electroless Ni Plate OD Zn/Ni Electroless Ni Plate OD Zn/Ni 6754518-1 1754518-7 6828045-1 1828045-7 1918883-1 1918883-7 6754519-1 1754519-7 6828046-1 1828046-7 1918884-1 1918884-7 6754520-1 1754520-7 6828047-1 1828047-7 1918885-1 1918885-7 PRO BEAM Mini Insert Kits Description 2 x 850 / 1300 nm Dual Multimode 2 x 1310 nm Singlemode 2 x 1550 nm Singlemode 4 x 850 / 1300 nm Dual Multimode 4 x 1310 nm Singlemode 4 x 1550 nm Singlemode Part Number 1374759-4 1588129-2 1588128-2 1374759-2 1588129-3 1588128-3 Ferrule Kits Fiber Hole Size 125 m 126 m 126 m Mode SM SM MM PRO BEAM Connector Mini Mini Mini Part Number 1754700-1 1754700-2 1754699-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 30 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Connectors/Adapters/ Tooling & Accessories Expanded Beam Avionics-Related Standards and Specifications for ARINC 600, 664, 763 and 801 Typical Assemblies for In-Flight Network Applications ARINC 664 -- Aircraft Data Network Tyco Electronics' ARINC Connectors with Mini Expanded Beam inserts will meet/exceed all 100 Base-FX Ethernet LAN applications 1 ARINC 763 -- Avionics Network Server System -- Tyco Electronics' ARINC 600 Connectors are designed to meet/exceed 100 Base-FX Ethernet LAN applications. Network Server Unit (NSU) -- can use ARINC 600 Size 1 connector with up to 8 Expanded Beam fiber optic channels (two Mini Expanded Beam inserts in cavity C) Server Interface Unit (SIU) -- can use ARINC 600 Size 3 connector with up to 16 Expanded Beam fiber optic channels (four Mini Expanded Beam inserts in cavity F) Integrated Network Server Unit (INSU) -- can use ARINC 600 Size 3 connector with up to 16 Expanded Beam fiber optic channels (four Mini Expanded Beam inserts in cavity F) ARINC 801 -- Fiber Optics Working Group Tyco Electronics provides a single reference point for Flight Level Optics that are multi-sourced. Typical Assemblies 31 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) ARINC 600 and 404 Product Facts For Mini Expanded Beam Inserts For use in 100 base-FX Ethernet LAN applications per ARINC 664 and ARINC 763 Insert holders designed to ARINC 600, Supplement 13 or to specific customer needs for Mini Expanded Beam inserts Drop-In Insert Holders utilize Standard ARINC 600 Retainers Hard Stop on Plug Side Spring-Loaded Stop on Receptacle Side Captive Hardware Facial Sealing -- Optional Bonded to Receptacle Block Mating Face Raised Collar Seal around Optics Insert compresses against Chamfer on Plug Block Mating Face ARINC 600 Insert Holders for Mini-Expanded Beam Contacts Size 1 Power Cavities ARINC 600, 1 Position 1MP ARINC 600, 2 Position 2MP ARINC 600, 1 Position 1MS ARINC 600, 2 Position 2MS Size 1 Signal Cavities ARINC 600, 3 Position 3MS See next page (33) for Size 2 / 3 Power and Signal Cavities 32 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Connectors/Adapters/ Tooling & Accessories Size 2 / 3 Power and Signal Cavities 1 ARINC 600, 4 Position 4MP ARINC 600, 6 Position 6MS ARINC 600 Insert Holders for Mini-Expanded Beam Contacts Typical Layout for Plug Typical Layout for Receptacle 33 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) F12 LuxCis Insert Assemblies MATING FACE 12.05 (0.474) 12.01 (0.473) 27.00 (1.063) 26.96 (1.061) INTERFACIAL SEAL FRONT HOUSING 29.95 (1.179) 29.15 (1.148) REAR HOUSING REAR GROMMET Product Facts ARINC 801 approved Optical termini for use with GPR, ARINC 600, circular MIL-DTL-38999 connectors I Industry Standard 1.25 mm ceramic ferrule I Compatible with 1.5-2.2 mm tight jacket and loose tube cable construction: I MT - Tight jacket cable I ML - Loose tube cable I Singlemode (SM) and Multimode (MM) versions I LuxCis Optical Termini part numbers: 1828199-1 MM/ML Version 1828200-1 MM/MT Version 1918614-1 SM/ML Version 1918616-1 SM/ML Version-APC 1918615-1 SM/MT Version 1918617-1 SM/MT Version-APC I I REAR FACE Insert Assembly, without Sleeve Holder, Environmental, F12 Key A 1738805-1 Key B 1738806-1 MATING FACE 12.05 (0.474) 12.01 (0.473) 27.00 (1.063) 26.96 (1.061) INTERFACIAL SEAL SLEEVE HOLDER FRONT HOUSING 36.53 (1.438) 35.63 (1.403) REAR HOUSING REAR GROMMET Materials: Housings - Nickel Plated Copper Ferrule - Zirconia Spring - Stainless Steel Crimp Sleeve - Nickel Plated Copper Protective Cover - Silicone REAR FACE Insert Assembly, with Sleeve Holder, Environmental, F12, Key A GPRB Key A 1738807-1 Key B 1738808-1 Optical Performance Singlemode, 1310 nm/1550 nm (UPC) Attenuation, Mean - 0.15dB Return Loss - >50dB Multimode, 850 nm.1310 nm Attenuation, Mean - 0.10dB Return Loss - >20dB LuxCis Inserts LuxCis Inserts and Cavity Reducers accept LuxCis Optical Termini. Assembly Capabilities Tyco Electronics has extensive Rugged Optic Harness capabilities. Please consult your local Tyco Electronics Sales Representative for assistance. 17F12Q2 36F36 12F5C2 20F12Q8 LuxCis is a trademark of Radiall, S.A. Product is manufactured under license from Radiall, S.A. Note: All part numbers are RoHS compliant. 34 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Connectors/Adapters/ Tooling & Accessories Comparative on Expanded Beam Inserts Comparative on Expanded Beam Inserts' weight and Insertion Forces when applied to an ARINC housing ARINC 600 connector mated pair size 2 = 440 grams (without copper contacts) ARINC style Mini and Junior size Expanded Beam inserts = 5 pounds insertion force each when applied to the Rack and Panel ARINC Connector inserts Signal Cavity Optical Holder insert (i.e.: holds up to six mini inserts with four fiber ball lenses each or up to 24 fibers each insert set) = @ 30 grams Power Cavity Optical Holder insert (i.e.: holds up to four mini inserts with four fiber ball lenses each or up to 16 fibers each insert set) = @ 20 grams Insert mated pair PRO BEAM Jr. Connector insert set = @ 41.79 grams Insert mated pair PRO BEAM mini Connector insert set = @ 16.17 grams Fiber = single fiber 4 kg / km Fiber = four fiber jacketed with a support member 24 kg / km Static spring force per mated Expanded Beam insert pair = 5 lbs. 1 LuxCis Optical Termini Notes LuxCis is a trademark of Radiall, S.A. Product is manufactured under license from Radiall, S.A. Sealed Circular LC ODVA Conforming Notes 35 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) LuxCis Optical Termini Product Facts Optical termini for use with GPR, ARINC 600, circular MIL-DTL-38999 connectors. Industry Standard 1.25 mm ceramic ferrule Compatible with 1.5-2.2 mm Tight jacket and loose tube cable construction: MT - Tight jacket cable ML - Loose tube cable SM / MM versions LuxCis Optical Termini Materials Housings -- Nickel Plated Copper Ferrule -- Zirconia Spring -- Stainless Steel Crimp Sleeve -- Nickel Plated Copper Protective Cover -- Silicone Optical Performance Singlemode, 1310 nm/1550 nm (UPC): Attenuation, Mean -- 0.15dB Return Loss -- > 50dB Multimode, 850 nm/1310 nm: Attenuation, Mean -- 0.10dB Return Loss -- > 20dB Mechanical / Environmental Performance Test Description Thermal Shock Standard SAE-AS-13441 met 1003.1 TIA/EIA 455-20A LuxCis Optical Termini in GPR A & B Connector LuxCis Optical Termini in 38999 Connector LuxCis Optical Termini in ARINC 600 Connector -55C /+100C -55C /+100C -55C /+100C 500h @ +100C 8h/axis 3.8g2/Hz 43 G rms 300 G - 3ms 500h @ +100C 8h/axis 3.8g2/Hz 43 G rms 300 G - 3ms 500h @ +100C 8h/axis 0.2g2/Hz 16.4 G rms 50G - 11ms 100 Cycles N/A 100 Cycles TIA/EIA 455-21A N/A 500 Cycles N/A SAE-AS-13441 met 2002-1 SAE-AS-13441 met 1001.1 cond C SAE-AS-13441 met 2009-1 10 Cycles 10 Cycles 10 Cycles 96 hr 500 hr 48 hr 68N 68N 68N Humidity (GPR/38999) TIA/EIA 455-5 met B7A 10 cycles / 24h 90% RH -25C/+65C 10 cycles / 24h 90% RH -25C/+65C N/A Humidity (ARINC 600) TIA/EIA 455-5 met B N/A N/A Altitude Imm. TIA/EIA 455-15 10,000 ft (69.6kPa) 10,000 ft (69.6kPa) Temperature Life Vibration Shock Mate/Unmate (GPR/ARINC 600) Mate/Unmate (38999) Maint. Aging Salt Spray Cable Ret. (1.8 mm) TIA/EIA 455-11 TIA/EIA 455-14A SAE-AS-13441 met 2016 10 cycles / 24h 90% RH -25C/+65C 10,000 ft (69.6kPa) LuxCis is a trademark of Radiall, S.A. Product is manufactured under license from Radiall, S.A. 36 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Crimp Sleeve 26.5 Max. [1.043] (Continued) There are three types of LuxCis Optical Termini available dependent upon cable structure. 0.05 O 3.33 +- 0.00 + .002 [.131 - .000 ] Tyco Electronics has multiple connector types/families available for the LuxCis Optical Termini System. 1 Connector Sub-Assembly LuxCis Optical Termini Part Numbers These are: Connectors/Adapters/ Tooling & Accessories LuxCis Optical Termini General Purpose Rectangular Connectors F5 & F12 Inserts MIL-DTL-38999 connectors 13-04, 15-06, 21-16 ARINC 600 F12 combinations and F36 Quadrax Cavity Reducers Motherboard & Daughtercard Solutions Cable Structure ML (loose & tight) MT (ultra tight) -- ML MT Cable Dia. 0.9mm Buffer 1.5 - 2.2 mm 1.5 - 2.2 mm For part numbers, details, and / or additional connector types and arrangements, contact your local Tyco Electronics Sales Representative. S/M Fiber 125.3 m APC * * * M/M Fiber 128 m PC * 1828199-1 1828200-1 Consult your local Tyco Electronics Sales Representative for additional options. * Contact Tyco Electronics for availability. Accessories Dust Cap (bag of 10) Part Number 1828221-1 LuxCis Cavity Reducers Size 8 Quadrax Pin Quadrax adapter for LuxCis Optical Termini in Quadrax FR type cavity Pin Quadrax adapter for LuxCis Optical Termini in Quadrax RR type cavity Socket Quadrax adapter for LuxCis Optical Termini in Quadrax RR type cavity Connector Options: S/M Fiber 125.3 m PC/UPC * * * Part Number LuxCis Cavity Reducer 1757727-1 Quadrax cavity reducer (FR/FR) for receptacle shell 1757710-1 Quadrax cavity reducer (RR/RR) for receptacle shell 1757711-1 Quadrax cavity reducer (RR/RR) for plug shell Cable Structure Loose Structure Tight Structure Ultra Tight Structure Yes No No Yes Yes No Movement between fiber & 900 m buffer Movement between 900 m & cable jacket Adapters Type Version LuxCis Optical Termini to LuxCis Optical Termini LuxCis Optical Termini to LuxCis Optical Termini LuxCis Optical Termini to LC LuxCis Optical Termini to LC LuxCis Optical Termini to LC Simplex Bulkhead Feedthrough Type Simplex Straight Simplex LC Panel Cutout Duplex LC Panel Cutout Duplex MIL-DTL-38999 Panel Cutout Alignment Sleeve Part Number Dim. Ceramic Zirconia 1828996-1 Fig. 1 Ceramic Zirconia 1828997-1 Fig. 2 Ceramic Zirconia 1828979-1 Fig. 3 Ceramic Zirconia 1828980-1 Fig. 4 Ceramic Zirconia 1828995-1 Fig. 5 Tools Description/Function Metal Extraction Tool (M81 969/1-03) Plastic Extraction Tool (M81 969/1403) Daniels Right Angle Insertion Tool Daniels Right Angle Removal Tool LuxCis is a trademark of Radiall, S.A. Product is manufactured under license from Radiall, S.A. Part Number 91066-3 M81969/14-03 DAK83-16* DRK83-16* * Contact Daniels Manufacturing Note: All part numbers are RoHS compliant. 37 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) LuxCis Optical Termini Adapter Dimensions Terminus to Terminus Bulkhead Feedthrough Terminus to Terminus Straight Terminus to LC Simplex Terminus to LC Duplex, LC Panel Terminus to LC Duplex, MIL-DTL-38999 Panel Cutout LuxCis is a trademark of Radiall, S.A. Product is manufactured under license from Radiall, S.A. 38 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Connectors/Adapters/ Tooling & Accessories Most of the tools included in the Termination Kit are commonly used in the fiberoptic industry (strippers, cutting pliers and all accessories for fiber and cable preparation). The items in the table below are specially made for the LuxCis Optical Termini System. Their use is highly recommended to achieve mechanical and optical performances. Qty -2 1 1 2 1 1 1 10 5 10 15 1 1 1 1 1 5 10 1 1 1 1 1 1 1 1 1 1 -- LuxCis Optical Termini Termination Kit Part Number 1828644-X Qty -1 1 1 2 1 1 1 10 5 10 15 1 -- -- 1 1 5 10 1 1 1 1 1 1 1 -- -- -- 1 Description Label, Termination Kit Insertion and Extraction Tool 1.25 mm Swab LC Polishing Bushing Polishing Plate Polishing Pad 0.3 m Polishing Film Fine Diamond Polishing Film 5 m Polishing Film 9 m Polishing Film Cleave Tool Curing Oven Block Curing oven Resin injector tips Resin injector Epoxy, 353ND Alcohol Fiber Wipe Inner Ferrule Shaping Tool Hexagonal key Fiber Stripping tool (125 m) Handtool Die-set, LuxCis Optical Termini KEVLAR Shears Cable Jacket Strip Tool 1.25 mm Microscope Adapter 200x Microscope Carrying case, Weekender Carrying case, Attache Part Number 1918887-1 91066-3 1828355-1 1754074-1 501197-1 501523-1 228433-5 503887-1 228433-8 1374484-1 504064-1 1918510-1 502130-1 1918509-2 1918509-1 504035-1 501857-2 1918511-1 19840-5 1754708-1 58532-1 1828889-1 1278637-1 1278531-1 1754765-1 1754767-1 1918881-1 1918834-1 Item # 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 The following tools are necessary for product termination but are not included in the kit: Alcohol, canned air, and clean cloth. Other accessories available include ruler, tweezers, cleaning tip, roller adhesive tape, moss cable support and permanent ink markers. Tool Kit Contents LuxCis Optical Termini Service Tool Kit (Inspection, testing & cleaning) Part Number 1828335-1 LuxCis Optical Termini Service Tool Kit (Cleaning only) Part Number 1828335-2 LuxCis Optical Termini Service Tool Kit (Testing only) Part Number 1828335-3 LuxCis Optical Termini Service Tool Kit (Hand Held Digital Probe Kit) Part Number 1828335-4 Item # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Comp Part Number 1278540-1 1754767-1 1754765-1 6374613-5 6374615-5 1918808-1 1918810-1 1828349-1 1828350-1 1828352-1 1828353-1 1828465-1 1918222-1 1918223-1 Description Soft Carry Bag 200x Microscope LC Microscope adapter LC - SC 50/125 cable assembly LC - SC 62.5/125 cable assembly 1.25 mm swab OPTIPOP C Card Cleaner Optical Loss Test Set OLTS 1.25 mm detector cap Visual Fault Locator VFL 1.25 mm Adapter Label, Service Kit Inspection, Hand Held Digital Probe Kit 1.25 mm Adapter, Digital Probe -1 inspection, cleaning & testing -2 cleaning -3 testing -4 Hand Held Digital Probe Kit -1 1 1 1 2 2 2 2 1 1 1 1 1 -- -- -2 -- -- -- -- -- 2 5 -- -- -- -- -- -- -- -3 -- -- -- -- -- -- -- 1 1 1 1 1 -- -- -4 -- -- -- -- -- -- -- -- -- -- -- -- 1 1 KEVLAR is a trademark of E.I. du Pont de Nemours and Company. LuxCis is a trademark of Radiall, S.A. Product is manufactured under license from Radiall, S.A. OPTIPOP is a trademark of NTT Advanced Technology Corporation. Note: All part numbers are RoHS compliant. 39 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Hand Held Visual Fault Locator (VFL) Product Facts 650 nm (visible) Class 2 1.0 mW max Diode Laser Continuous and flashing (2-3 Hz pulsed) modes Rugged rubber shell and body design modeled after a popular military connector Lanyard attached dust cover Standard 2.5 mm adapter for SC, ST, and FC connectors Optional 1.25 mm adapter for LC and MU connectors. Unique design allows adapter to permanently reside on VFL so it is not misplaced allowing user to choose 1.25 mm or 2.5 mm Uses 1 "AA" style battery for >30 hours of continuous use Soft-sided belt case for convenience and storage The Tyco Electronics Hand Held Visual Fault Locator (VFL) is a rugged and affordable solution for identifying breaks and bending in optical fibers and cabling. Its powerful, red (650 nm) laser provides the ability to locate damaged, broken, or tightly bent fibers that cause undesirable attenuation in your system. The jacket of the cable will glow red at the location of the fault. The FLASH button allows the user to toggle between continuous or pulsed mode. The compact, rugged, and balanced design is based upon a popular harsh environment fiber optic connector. The single "AA" style battery is good for >30 hours of continuous use and the softsided protective case with belt loop provides a convenient and protective means of storage. Applications Affordable VFL Solution for: Identifying breaks, bends, and other damage in optical fibers Tracing fiber paths Identifying termination errors Continuity testing Product Dimensions Description Hand Held Visual Fault Locator 1.25 mm Adapter for Hand Held VFL Includes Part Numbers 1828352-1 and 1828353-1 Part Number 1828352-1 1828353-1 1828352-2 Length -- 18.5 cm [7.283 in] Width -- 2.2 cm [0.866 in] Thickness -- 2.2 cm [0.866 in] Weight (w/battery) -- 150 g [0.33 lb] Combination LIGHTCRIMP PLUS SC/ST/LC Termination Kit Part Number 1985162-1 Note: All part numbers are RoHS compliant. 40 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Plug Part Numbers: 1828618-1 (Multimode) 1828618-2 (Singlemode) Product Facts IP67 rated to ensure protection from dust and water immersion LC connector qualified to Telcordia GR-326 and TIA/EIA 568B.3 Temperature range of -40C to 85C Bayonet-style mechanical lock Flame retardant materials per UL 94 V-0 Dual mounting bulkhead design Singlemode and multimode fiber Can be used with cable types 9/125, 50/125 and 62.5/125 LC to LC internal to the box Jumpers LC connector accepts tactical cable with 4.5 mm - 7.5 mm OD ODVA Conforming Plug to X interface on tactical with break out ODVA Conforming Plug to Plug on tactical cable Build to customer need Connectors/Adapters/ Tooling & Accessories Sealed Circular LC ODVA Conforming Connector Receptacle Part Numbers: 1828619-1 (Multimode) 1828619-2 (Singlemode) Plug & Receptacle Cap Part Numbers: Plug Cap 1828740-1 Receptacle Cap 1918177-1 1 Applications The LC ODVA Conforming Connector is ideal for: Harsh environments where chemicals, corrosive gases and liquids are commonplace Inside and outside industrial plant and equipment that interface with industrial Ethernet networks Remote interface applications such as towers and antennae as well as FTTX in PON and at the home applications Mobile routers and internet hardware Standard Cable Assemblies Part Number 1828935-X 1828936-X Description ODVA LC Interface, 62.5, 2 Fiber ODVA LC Interface, Singlemode, 2 Fiber Note: X = length in meters Contact your local Tyco Electronics Sales Representative for information on upcoming product. Note: All part numbers are RoHS compliant. 41 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Coming Soon -- Sealed Circular LC Shielded EMI Connector EMI Shielded Receptacle Assembly Components are thin film coated using a four-step SS/Cu/Cu/SS vacuum deposition process This coating results in an approximate 99% shielding effectiveness over uncoated assemblies 42 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Rugged Fiber Optic Products (Continued) Connectors/Adapters/ Tooling & Accessories Rugged Media Converter & Ethernet Link Extender Solutions Harsh Environment Optical Media Converter Assemblies allowing blind mate field applications over one, two, or four fibers Tyco Electronics offers solutions for Harsh Environment applications of Ethernet Media Converters. 1 This page demonstrates Tyco Electronics' capabilities for Advanced Optical Modules. These include Fast, Gigabit, and Ethernet Link Extenders. For additional Advanced Optical Modules, see Fiber Management & Packaged Solutions, Catalog 1307895, Section 3. Contact your local Tyco Electronics Sales Representative with your specific design needs. Design Objectives Specifications Standard Data Rates Duplex Mode Max. Forward Rate Fiber Connector Fiber Working Range Optical Budget Optical Wavelength Emissions Safety Temperature Range Dimensions Power Consumption Power Qualification Results IEEE802.3, IEEE802.3u Ethernet @ 10/100 Mb/s 10 and 100 Mb/s auto negotiation (option to force 10 Mb/s for legacy systems Full or half-duplex auto-negotiation and N-Way support 14,880 packets per second (pps) @ 10 Mb/s, 148,800 pps @ 100 Mb/s Multimode TBD TBD Multimode Complies with FCC Class A and CE Class A UL, CE -40 - 85C with humidity 10% to 90% non-condensing O 2.0" (51 mm) X 7.7" (195 mm) from cap to cap O 2.0" (51 mm) X 6.6" (168 mm) X 7.6" (194 mm) for 90 assembly TBD 5VDC Complies with MIL-STD-810D environmental requirements 43 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639